Quick Play and volume slider

I have a new dv51235dx laptop.  When I try to use the volume slider, the volume bar does not display on the screen like it's supposed to.  Also, when I push the Quick Play button absolutely nothing happens.  I've uninstalled and reinstaled drivers for the audio and for Media Smart but that didn't help  Any idea how to solve these two problems.  Since they are both keyboard functions they might be related, but I don't know for sure.  For what it's worth, the phone reps from HP don't know how to fix either problem.

If/when the iPod is totally dry:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a hardware problem caused by the water.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
  Apple - iPod Repair price

Similar Messages

  • HT2188 6.0 (10a403) Loss of Volume control and Volume slider in music

    I have 2 iphone 4 and upgraded them to os6, one phone updated correctly and is working fine with no problems. The other phone is giving me nothing but problems. I intermitently lose use of my volume controls and when this happens the volume slider dissappears from the music app. even closing the phone and opening it does not bring these controls back but then all of a sudden they will appear only to dissappear as quickly, nothing I do seems to bring them back as I can leave the phone and when I go back to it they will be there. I also lose the click sounds from the keyboard. I have tried everything I can think of by erasing all content and settings 3 times, hard resetting many times. Any idea's?

    I still have a 3GS and had NO intention of updating to iOS6 for the fear of the maps issue (because I use maps so frequently) and that it would **** near render my phone usless. But then I was unable to manage my Voice memos (also something I use frequently) so I sucked it up and upgraded yesterday.
    And now the only volume control that I have seems to be in my iTunes. Can barely hear a phone call or voicemail and cannot adjust the volume at all, not even with a headset on. Fix this, Apple. Fix it NOW!!!

  • Volume and Volume Slider Missing

    Recently, I dropped my 32GB iPod Touch 4th Generation into a bowl of water. I had an Otterbox Survivor Case on it, however, the rubber pieces were missing where the headphone jack and the charging jack are. After drying off my iPod and placing it in a bowl of rice, I soon came to the realization that my volume slider was missing. Panicking, I attempting pressing the sidebar buttons, sliding my fingers across where the slider should be, even turning off and restarting my device.

    If/when the iPod is totally dry:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a hardware problem caused by the water.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price

  • Mute Button and Volume Slider

    Hey guys, ever since updating to Windows 7, if I have the mute button enabled and I accidently hit the volume slider it unmutes. Is there any way to disable this feature and disable volume changes unless it is unmuted? Thanks for any help. I have a Satellite L505-S6959.

    Hi
    You have a couple of options as I see it please find the steps given below.
    First try system restore on the unit to the date where unit was working fine if this does not work
    Then go to HP website dowload the latest driver for the Finger print and check.
    Update the Bios on the unit.
    If all these steps does not resolve then last option to is to run a recovery please back up all the data on the unit as it will be lost.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
    Regards,
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Volumes OK, then press play and volumes wrong!!?

    I have carefully crafted the volume and pan levels for each instrument. I then press play, either from the very beginning or from any point in the middle, and the volume levels or effects or both are not correct. To Fix the problem, I pick ANY tracks headphone icon (monitor) button and click it once and then back on, and the levels are perfect, just as I wanted.
    The GIGANTIC mystery is why why why.
    What is going on here. I'm wondering if I have too many effects, or there is an audio limitation. No clipping is going on, and no messages are popping up. All is smooth....it just seems my garageband doesn't want me to have the volume settings and changes that I have made.
    Mysterious! Please help!!!!

    I have carefully crafted the volume and pan levels
    for each instrument. I then press play, either from
    the very beginning or from any point in the middle,
    and the volume levels or effects or both are not
    correct. To Fix the problem, I pick ANY tracks
    headphone icon (monitor) button and click it once and
    then back on, and the levels are perfect, just as I
    wanted.
    The GIGANTIC mystery is why why why.
    What is going on here. I'm wondering if I have too
    many effects, or there is an audio limitation. No
    clipping is going on, and no messages are popping up.
    All is smooth....it just seems my garageband doesn't
    want me to have the volume settings and changes that
    I have made.
    Mysterious! Please help!!!!
    It's funny you mention this because I just spent a long, long time making sure all my levels were perfect (although I mixed using Pro Tools) only to have my session's audio files accidentally erased. I could recreate the **** thing, but, dude, I'll just let it go 'cause it sounds pretty **** good as it is. I just hope stuff doesn't disappear when listen back through my monitors 'cause I mixed, initially, through headphones.

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • Hi just updated to ios7   Speaker make No sound in music player Volume slider is not functioning at all , it's grey Ringtones works fine. I have apple tv in my local network so in ios 7 music player i switched to play through airplay And back to iphone -

    Hi just updated to ios7
    Speaker make No sound in music player
    Volume slider is not functioning at all , it's grey
    Ringtones works fine.
    I have apple tv in my local network so in ios 7 music player i switched to play through airplay
    And back to iphone - no sound
    Also tried another music player same **** - plays no sound
    iPhone 4S, iOS 7

    Hello there, vishnu cs.
    The following Knowledge Base article provides some great information for troubleshooting your issue:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have an I phone 4 and since I upgrade to the lastest ios  6.1.3 , my volume slider is missing. The sound works when but I can't mute or turn up or turn down the volume. I've tried a hard reset , reboot, blowing air in the dock and earrplug jack. :-(

    I tried almost evrything to restore my volume slider( + & - ). My phone rings, plays music and every other sound but I can't mute or put  the volume up r down with the side buttons.. My volume slider bar is missing. This is only simce I upgraded to iso 6.1.3 .. What's with that?? I figured out how to manually  mute the phone through (General, Accessibitily) by muting the bell for sound and unmuting the bell for silent mode. But what a freaken pain, when you have to take all those extra steps to turn your volume up or down or  mute your Iphone??
    We have no Apple Store here so no luck to bring it in to get looked at.. Please , does anyone out there know what else I coold do???
    Cheers

    Does it work with headphones plugged in?  That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

  • IPod Touch 1st Gen and 3.1 update DELETES volume slider

    I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
    Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
    I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
    So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
    Thank you.

    I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
    I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things.

  • The sound doesn't work.  It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored and still no

    It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored the device and still no sound.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Fiddling with volume slider and sound quality

    In an attempt to bypass the infamous volume cap that plagues iPods sold in the EU, in the past I fiddled with the volume slider of many of my MP3 tracks, either directly or via third party applications (such as euPod). Afterwards I have changed my mind and reset the slider.
    Later on, I have read a few sources claiming that the above procedure would cause a permanent modification of the MP3 file and/or affect sound quality.
    I am somewhat puzzled by such claims... Am I really better off re-ripping all those tracks? Can anyone point me towards an undisputed “truth” on this matter?

    The third one is a hardware issue: The earbuds jack
    is very loose. Apparently, the iPod automatically
    pauses playback when the headphones are disconnected.
    Hence, I only have to wiggle the connector a bit and
    the nano stops playing. This really would be annoying
    if I were to go jogging with my iPod ...
    hmmm.. that happens to my ipod too and i only got it for christmas. so i was a bit gentle with it.so hence it comes out very easily.
    but whilst reading all the replys i decided to be harsher to my ipod and just push my earbuds in all the way..it worked!! that might be the same for u or i might have just been a bit too forgetfull and thought that my ipod was delicate coz its like.. so preety:)
    lol im in love with my ipod ..
    dont know if this helps..hope it does..
      Windows XP  

  • The volume slide control on my 4s has disappeared when I watch videos and listen to music. Any suggestion on how to get it back? I've tried the recommendations in the manual

    The volume slide control on my iPhone 4S has disappeared when I play videos, music and YouTube. I've tried the recommendations in manual, to no avail. Any suggestions?

    Your phone still thinks it is plugged into the stereo. I don't remember how to solve this but perhaps you can search through the forum or maybe one of the members here will jump in on how to switch the playback to speakers.

  • Global Volume Slider (from library) to control drag and drop xml playlist

    hi there,
    have spent some time doing tutorial and looking online but can't seem to get a volume slider functioning.
    the scenario is :
    3 circles which can be dragged over a target (one for each circle)
    When the circle is placed on its target it loads its respective xml playlist into 4 buttons (play, pause, forward, back)
    I want to be able to create some kind of function to control the volume, either using a slider or a rotary dial, whichever is easiest!
    any help greatly appreciated!

    Be sure you include the SoundTransform class...
    import flash.media.SoundTransform;
    Create a SoundTransform object
    ...named 'st' (I like short names). Create this AFTER the creation of your soundChannel object...
    var st:SoundTransform = channel.soundTransform;
    st.volume = 1;//This sets the volume to 100%
    channel.soundTransform = st;//This associates your SoundChannel object with your SoundChannel object
    Then, for simple testing of this
    ...create some new button...
    halfVol_btn.addEventListener(MouseEvent.CLICK, doHalfVolume);
    function doHalfVolume(e:MouseEvent):void{
       st.volume = .5;//This sets the volume to 50%
    So, now you have a half-baked volume control. Nothing exciting, but this gets you acquainted with the volume part of what you want. You have created, and have access to, the st.volume property to set the volume to whatever you want, from 0 to 1.
    Next, I'd suggest that you practice the creation of your own slider. Search online for tutorials on it, like I mention above (as a Flash programmer, this is something I, and you, end up doing - searching - dozens of times a week at times). In the end, the position of your knob/button/control in the slider is a %: What % is the location of the knob on the total width/height of the slider. This % is what you send to the st.volume property.
    http://www.lmgtfy.com/?q=create+volume+slider+as3
    As an alternative to create your own slider, you can also use the Flash "Slider" component:
    http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/fl/controls/Slider.html
    ...but this, too, requires some getting-up-to-speed with using it.
    Good luck. If you want some actual code examples - you'll find plenty online :-)

  • HT1567 I have the volume control symbol in the center of my iPad all of the time.  My music will not play and the volume remains off.  When I try to increase the volume manually it statics and will not maintain a volume level.  Thanks

    I have the volume control symbol in the enter of my iPad all of the time.  My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level.  Thanks

    Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

Maybe you are looking for

  • Iphoto 6 to iphoto 9 question. Please help.

    Hello, I have years of albums and slideshows from iphoto6 on my G5 tower (Tiger). I just recently purchased a used 27 inch imac with iphoto 9 on it. I used migration assistant to transfer my files to the imac. When I launched itunes it successfully u

  • N9 help me stop full text message from displaying ...

    My full text message is displaying on the bottom of my wallpaper and on a "notifications" screen. How do I stop this ? I only want to read/ see my text when i go into the text area . It is not displaying on the black screen with time . Attachments: t

  • Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

    Hello, "C:\app\xps\product\11.2.0\dbhome_1"  where is my installation of database oracle enterprise 11g; I use Windows 7 Pro. I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > O

  • Can't start smc ...

    # /etc/init.d/init.wbem start # /etc/init.d/init.wbem status Solaris Management Console server not running on port 898. # ps -ef| /usr/xpg4/bin/grep -e smcboot root 1370 1 0 07:25:01 ? 0:00 /usr/sadm/lib/smc/bin/smcboot root 1372 1370 0 07:25:01 ? 0:

  • Where to get JPDK 1.4 (Premature 1.5 Release)

    I'm trying to back out of JPDK 1.5 as suggested on another form (see email from Steven Leung below). Where can I get 1.4 zip now, it seems all links go to the May 1.5 version... Folks, I need to apologize to you on behalf of the PDK team. We actually