Quick preview issues

I’m using a late 2008 MBP and SL 10.6.4 with AP3. After importing around 5000 RAW to a new project, quick preview in full screen isn’t working properly. Viewing the photos in full screen at full resolution is not an issue. Only when switching to quick preview, the image disappears and the screen goes black. When flipping through the photos in full screen and quick preview on, the photos flash up for a blink of an eye before the screen goes black again.
What I’ve tried so far is to delete and generate new previews, repair permissions and the library and rebuild the library. However, as a result all projects now have the same issue. Moreover, photos aren’t shared with other (iLife) applications. The projects in the photo browser in Mail as well as the control panel for desktop background are empty. Sharing with iTunes, i.e. syncing photos on my iPhone, doesn’t work (again, projects have 0 photos). Of course, sharing is enabled in AP preferences. I’ve read several articles about this sharing problem but the solutions posted didn’t work for me. As sharing uses the jpg files, I guess this is somehow related to the quick preview issue.
It seems that for some reason Aperture does not read the jpg files. Any ideas what else I can try to solve this? Thanks!

Unfortunately, I do not have a solution for you because I am struggling with a similar problem since the release of AP3. I have also experienced the blink of an eye appearance and disappearance of some previews. Also, sometimes the thumbnails and the preview pictures shown are unrelated, or the previews are scrambled. I have tried every AP2 to AP3 conversion strategy in the book; the result is always the same. Hope Apple finds a solution for this quickly.

Similar Messages

Quick preview issues - can someone please test

Quick preview does not seem to work correctly.
When photographing, I do not have my camera automatically rotate my images. I do this so I can see a full preview on the LCD on the back of the camera. When I download images into Aperture, I rotate manually.
With the advent of Quick Preview, I have begun to use it only to find that with RAW files, the manually rotated image appears squished and not formatted correctly in the viewer (2nd display). Images that were not manually rotated appear fine. For some reason, when photograph in JEPG, the same issue does not surface. All images, manually rotated included, appear fine in the viewer.
Could someone please test if this is happening for themselves too.
Thank you in advance,
Christopher David

Hi,
thanks alot for testing the video.
If anyone can provide any more info, or can show me an
alternative way to embed the video in a webpage (other than
paid-Streaming), I'd be grateful,
thanks.
PS. - the video is from the YouTube website
(www.youtube.com), the .flv file downloaded through KeepVid -
www.keepvid.com .

Crazy preview issue with PS CS5

Hey! I have a rather odd issue that I'm dealing with on 2 separate digital painting projects
on my desktop I have my psd file, and I often throughout the day will hit space bar to do a quick preview of the image.
today I had been using cmd+c and cmd+v on a selection I wanted on a new layer, but it wouldn't do it. so I saved the image, and restarted PS, and that seemed to do the trick. -- I was able to copy/paste just fine.
So the issue is, when i hit space bar on my desktop to view the image, I am now only seeing that piece that I was trying to copy/paste!!
the rest of the image on the thumbnail is there, and all of the layers are visible inside the document.
Kinda crazy! thanks for any imput!
Kyle

Old bug in Apple's preview and image file format code.
We've submitted it to Apple, and they'll eventually get it fixed.

Thumbnail/Quick Preview/Export have strange grey overlay

I spent quite some time googling this issue, so it's starting to seem like a "just me" issue. Yet I can't find a way to solve it, so here I go asking for help.
I have a library with a single project and a series of photos in it. Most photos have a crop, white balance, exposure, sharpen and curve global adjustments, as well as areas with definition brush strokes and dodge brush strokes. The dodge brush was used to make the "almost white" background around product in the shot completely white.
The thumbnails display a light grey (around 250;250;250 RGB, although it varies a bit) blotchy overlay in the areas of the image that are expected to be white. When I click on a thumbnail to bring up the larger image into view, for the first few seconds, while the "loading" spinner is visible on top, the grey overlay can also be seen on the enlarged image. After loading is finished, it disappears. If I turn on the Quick Preview mode, the grey overlay persists and does not go away. Images that I have viewed enlarged with Quick Preview turned off continue to display correctly when I come back to them after looking at other images, as if they are cached in memory. After I view a few dozen images, though, these correct versions seem to be evicted from cache, and I get the grey overlay during the "loading" period again.
The grey overlay does not correspond one-to-one with the area where brush strokes have been applied.
The scariest part of it all is that when I try to export versions, they are exported with the grey overlay intact.
I have tried rebuilding thumbnails, reprocessing masters, repairing permissions, repairing the database. The problem persists. I have tried disabling the dodge adjustment but unchecking it and then checking it again. The problem persists. I have tried removing the dodge adjustment and then brushing it on from scratch. The problem persists.
Out of ideas now. Please help. I would love to attach screenshots, but don't see an option to do so.
Message was edited by: antonzzzz

All you are seeing is the difference between the fully-decoded image created on the fly by applying the adjustments saved as instructions in the Version text file to the Master image file, and the Preview created according to the parameters you set in Preferences.
If the Previews don't meet your needs, try a higher quality/larger dimensions.
Likewise for your exports.
What are your Preview and Export settings?
Take a look at the highlighted section
How Aperture Displays Images in the Viewer
on this page in the User Manual.

Aperture quick preview locks in after using Google/Nik to edit a photo

I'm not sure when this started happening, but I've recently been annoyed with very frequent restarts of Aperture being required.
If i edit a photo with any of the Nik/Google programs, save it, and get back to my project full of photos...the quick preview stays locked onto the original of the photo I just editted. It doesn't even update to the edit of it. I thought my library was large and bogging the system down or something, so i made a new library and imported 4 photos, editted one, and it's still doing the same thing. Any thoughts?
I did a quickie search, but I'm terribad at searching in these forums. Sorry if it's somewhere obvious to you pro searchers

hey thanks so much! ok, ill jsut deal with editing one photo at a time and then restarting aperture each time.. lol its ANNOYING, but it WORKS.. so ill deal with it!
thanks again!!!
oops, i tried to change it to you solved my issue instead of helped, and i think i marked that i solved my own problem.. ugh i hate these forums! lol

Super slow audio RAM preview issues in AE CS5

Hi all,
I've been having a tough time previewing audio while working in AfterEffects. I'm using Version 10.0.2.4, running on a 2x2.66 GHz 6-Core Intel Xeon Mac Pro with 64 gigs of memory.
I've opened up projects that have never given me any issues in the past and I seem to be experiencing the same issue, over and over again:
When I try to preview a comp with audio (either hitting "0" on the keypad, or "." on the keypad), I get the "spinning beach ball" for at least 20-30 seconds before the audio kicks in. When I disable audio in my preview window, I have no delay with the RAM preview.
This happens with .aiffs and .wav files.
I've done the usual tricks -- restarting my machine, double checking to make sure there's not an issue with my speaker setup, repairing permissions, checking for updates.
Has anyone else experienced these issues, and is there a workaround? I have a job coming up that requires me to quickly preview audio and waiting 30 seconds every time I need to check my progress with a RAM preview is going to be soul-crushing.
I'll happily answer any questions -- I'm sure there's a bunch of info I've left out, and fingers crossed it's just some setting that I've ignored that's causing this issue.
Thanks,
Dan

Sorry for all the questions, but...
What path/hardware does your audio take to be output? Analog from the Mac? Via a third party card like an AJA or Blackmagic device? USB speakers?
Have you specified the audio device in the AE audio hardware preferences? Have you tried outputting to a different device, or removing the device and just using the standard system audio?

Quick preview acting up

Hi,
I spent the last few days reorganizing my Aperture library and migrating from managed to referenced files.
The problem I'm having is that Quick Preview doesn't work with the embedded JPEGs. It does work with the previews created by Aperture but they always stay somewhat fuzzy thanks to the scaling algorithm in Aperture/OSX.
Aperture does use the embedded JPEGs on newly imported images.
My question is: is there any way to get Aperture to read those embedded JPEGs again ?
The fuzzyness (even though it's subtle) is killing me since I mainly use quick preview to quickly assess image sharpness and delete the unsharp images quicly after import.
What I've tried:
- Delete the stored previews (this results in 1024x768 images in preview that get scaled up to full screen and are small when I press Z in full screen mode)
- Rebuilt previews (1/2 size, quality 7): this results in somewhat workable images but still with some fuzzyness and absolutely not as sharp as the embedded JPEGs.
- I've consolidated the masters to see if it's caused by the Referenced masters system (it isn't). I've moved them out of the library again afterwards.
- I've rebuilt the library and did a consistency check.
It affects all my projects that were in the library prior to the reorganisation. And once again: newly imported images work properly, so quick preview isn't "broken" completely.
Any ideas on what I could try ?

The other option (which I'm considering) is to use referenced libraries and import the Raw+Jpg into Aperture. Then do a "new master from Jpeg on the raw files displayed. The jpg's are now displayed as a version. With referenced libraries, you can delete the versions without losing the raw file. If you can use the jpg, great. If you want to edit the raw, simply do a "show in finder" from under the file menu and drop the nef into NX and do your "in-camera" edits such as Picture controls ect.... Then export the file as jpg or tiff and drop back into your aperture project. I'm leaning this way to avoid using another application and Aperture is clearly more capable than View. One of the advantages of View, however, is there is an "open in NX" function. You cannot use Apertures' "edit with" command to open the raw file. It will only render a tiff or jpg to an outside app. It would be nice to be able to open the native raw file in NX using this function. Not a big deal with the "show in finder" option and referenced libraries.

RAM Preview issue

Hi,
I'm wondering if anyone has seen this or can provide some direction for further investigation. This is on a new Mac Pro on which I have just installed FCS
In some projects the RAM preview has no effect on playback performance. After generating a RAM preview, the project will play at the same speed (say 2 fps) and as soon as I pause playing, the green progress bar that indicates project is loaded in RAM disappears or becomes fragmented - without modifying the project in any way. When this happens it also becomes nearly impossible to do additional editing as every simple task (as simple as resetting the play range) can result in the spinning beachball. There was a recent thread on RAM preview issues (http://discussions.apple.com/thread.jspa?messageID=12215113&#12215113) but it appears the problem there was due to a long HDV project. The projects I experience this on generally have a lot of particles or replicated elements, but are standard 720 x 486 resolution projects lasting less than 10 sec. System memory usage is relatively small, less than 4 GB.
These issues arise on a recently purchased MacPro (3.33 GHz 6-Core, 16 GB RAM, ATI 5870). The boot disc is an OWC SSD, and user folders, scratch, etc are on separate hard drives. I installed the operating system on the SSD using the installation disc, and have manually installed all my programs from their original discs. (I initially used migration assistant to bring over applications, but that failed with some applications, so I wiped clean and started over). There have also been some past threads on how different hardware configurations can affect performance, but I don't seem to be doing anything abnormal here.
What I have done:
Tested ram using memtestosx
Verified memory usage through activity monitor. The projects I have tested on use up less than 4 GB of system memory
Before each test or comparison I reset preferences.
I do not have this flakey behavior with an older MBP (17" 2.93 GHz Core 2 MBP with NVIDIA 9600) running the same OS (10.6.4) and motion version (4.0.3). Running the same project on the MBP will take longer for the RAM preview to complete, but when it does, the project plays at full frame rate.
The upgrade to a MacPro was mainly for other CPU and RAM intensive applications unrelated to video or graphics, but I expected motion to show a nice performance boost over the MBP on this new machine. Anyhow, any insight or direction for further investigation that I should pursue will be appreciated.
Thanks.

I tried your project (nice, BTW), and yes, 20,000+ particles take some time to render. However, when I did a RAM Preview, I had no problems - after render it played at full speed.
UNTIL...
I selected the emitter. Then playback went to the pre-RAM-Preview speeds. As soon as I turned off overlays or made sure the emitter was not selected, the playback instantly sped back up to full speed. I believe this is because Motion needs to image the constantly changing outline of the emitter. This means it needs to be re-drawn every frame after Motion determines the extent/size of the 20,000 particles on their random journey.
I think this is backed up by the fact that near the end of your project, there are only a few particles to keep track of and the playback appropriately speeds up. Also, CPU usage vastly increases when I turn on the overlays.
Moral of the story? To ensure the quickest possible playback, turn off overlays (⌘/) or ensure that something like a particle emitter is not selected during playback.
Patrick

Preview issue. Send to iPhoto option is grayed out after Lion upgrade

Preview issue. Send to iPhoto option is greyed out after Lion upgrade.
In Snow Leopard it was an option to send pics from Preview to iPhoto, but now it is greyed out if I right-click on the pic. I have searced and tried everything, but I cannot fix it, so does anyone have a fix for it? Please :-)

I can offer no help but would also like to see this issue resolved. Firstly, it would be useful to know if this problem is seen by everyone. When viewing photos in Preview, with thumbnails in the sidebar, right-clicking on any of the thumbnails results in this:
Prior to the upgrade to Lion, "Send to iPhoto" was not greyed out and worked as expected.

AP 2 and Sony A700 embedded JPG Quick Previews?

The Sony A700 RAW and cRAW images contain an embedded high quality JPG image designed for viewing on HDTV. If the camera is set to 3:2 aspect ratio it is 1616 x 1080 pixels (and if set to 16:9 then it is 1920 x 1080).
Aperture 2.0 does not appear to make any use of these large embedded JPGs in Quick Preview even though I have selected " Use embedded JPG from camera if possible".
It is not clear if this could be forced by limiting the size of previews to either slightly smaller than or larger than the size of the embedded JPGs from the camera?

Does anyone know an answer to this question? I'm using the Aperture 2 trial and I like the software for cataloging but since I'll use Capture NX for most of my editing it would be great if I could get Aperture to display the embedded jpg in preview mode. But it doesn't. I've checked that box in the Preferences. I've deleted the previews for the project. I've made sure that Maintain Previews isn't checked. But I still don't get the embedded jpg in preview.
By the way, I know what the embedded jpg should look like since it does display properly when importing into Aperture.
Any help appreciated.
David

Why is my Quick Preview taking ages to load

I am finding the Quick Preview in Aperture is taking a long time to load the picture. I have to come out of quick preview to allow the picture to load and be clear. Once it has loaded, I can go back in to QP and it works as expected. Until I try to open the next picture.
This has only started recently.Is it something to do with looking at masters instead of versions?

My first (and perhaps only) guess is that you have (perhaps inadvertently) set Aperture to not create Previews (or deleted them).
What happens if you select all the images in a Project and execute "Photos→Update Previews"? Does Aperture do anything? Are you then able to quickly move through them using Quick Preview?

Quick Preview unusable - images are "squared"/blurred

Hi,
Probably since 3.1.2 upgrade or 10.6.7 or turning on Time Machine I am experiencing following behavior:
I have project for my family photos in aperture for this Year where I have folders for months and then albums for events. I usually drag and drop the selected images from Import browser to appropriate album.
The problem is when I use Quick Preview - then all of imported images (in whole Album, but not project) are "squared"/blurred (you can imagine that like if you take image 200*200 and resize it to 1680*1680) - the small and middle preview are squared and the biggest and fullscreen are clear.
When I turn of the Quick Preview then the Loading... appears and clear the image. I can then turn on the Quick Preview and it stays clear until I restart the Aperture and squared image is back.
When I start the Aperture and select the album/project it automatically starts processing (Processing IMG_XXXX) some, seems random, number of images) - and nothing happened. (turn off and turn on Aperture and processing starts again).
Here is what I tried (no success with anything):
- Delete preview and generate new previews
- Copy to other project
- Change the size of the preview image (from 1680*1680 to 1920*1920) in Aperture preferences
- Change preview image quality to 9 from 8 in Aperture preferences
- Export the project as New library - this has one effect - the biggest preview and fullscreen image are squared here also
- applied all file permissions to files as are by default on Picture folder
- Repaired permissions
So in summary:
- preview pictures are squared
- aperture does not remember/store the smaller quick preview files after restart
And here is a example of the image:
http://dl.dropbox.com/u/17422374/example-squared.png
Thank you for any help or ideas to try.
Regadrs
Princatko
Mac OS X 10.6.7, with FileVault turn on
Aperture 3.1.2, masters are in Aperture Library, Library sits in ~/Pictures/ (default place)
Canon 5D Mark II

Since you've covered most everything (inc. permissions repair), it's probably time to move on to "Repair Database" and then, if needed, to "Rebuilt Database".
Instructions are found on [the general trouble-shooting page.|http://support.apple.com/kb/HT3805]

Quick preview/ How do I disable Hot&coldSpotw

Hi, in the first version of Aperture I had no Hot&Coldspots in my Quickpreviews. Now I do have this al the time in Aper 3. How can I shut this off. I only would like to have this in my normal view.

Either push "Shift + Option + H" or use the menu command "Highlight Hot & Cold Areas" under the "View" menu.
When you enter quick preview, it's locked on/off depending on the setting you are currently using. I don't believe there is a way to change this behavior in Aperture.

Quick Preview vs Raw

I'm relatively new to digital photography and Aperture, so I may be missing something very basis. But I couldn't find an answer through a search.
When I load my raw images from my Nikon D40x the quick preview images look great - rich blacks, lots of details, etc. When I switch to the raw image to make adjustments I get an image that is very flat, lacks the rich black, loss of details etc. I'd like to start making adjustments with an image with the quality found in the quick preview mode. Is that possible? What am I missing?
Thanks for your help

This is typical of Nikon NEF's the image that you are seeing is probably the embedded preview that reflects the in camera settings (picture control settings) where the default RAW processing does not.
Just discussed this here hate to post the link again but seems that you didn't find it:
[Nikon NEF processing in Aperture|http://photo.rwboyer.com/2008/12/aperture-2-and-nef-raw-recipies>
RB

Quick preview looks better than processed raw image...??

Hey all, probably a bit of a "newb" question here... so forgive me, and thank you...
Using a D7000 and often times when I shoot - the preview image on the camera looks BRIGHT, VIVID and ROBUST ... after import however - when reviewing my shots, JUST as I arrow over to the next shot - many of the preview images tend to look better than the processed image that aperture displays once it's done spinning it's wheels.
Perhaps I've messed up a Raw Fine Tuning setting?
When I click on quick preview and browse through an import, the pictures truly look nicer to me than the when aperture processes them.
Without question, the display on my acer monitor is a far cry from the miniature compressed image on the back of my nikon, however the more i shoot, the more I realize a disconnect between what I think I should see, and what I'm ultimately seeing in Aperture.
Are their specific settings to fine tune the import of raw d7000 shots?
Thanks much.. gk

I take it you're shooting and processing RAW images?
It's worth remembering that if you have a picture style selected (i.e. vivid etc), your camera might be applying extra contrast and saturation etc to the image you see on the back of the camera. Camera manufacturers do this so that we can give our pictures some extra punch and colour automatically.
I'd also be wary of comparing what you see on your camera to what you see on your monitor. Unless both are calibrated, you shouldn't trust either of them 100%. The best example of monitor calibration is going to look at TV's in an electronics store. You'll probably notice that in a wall of TV's, some pictures will be darker, some lighter, some more vivid, some more saturated. Using a calibration tool adjusts the picture your screen and monitor displays so that it is 'accurate'.
It's a bit like having a room full of scales and adjusting them so that they all read 1 kilogram when a 1 kilogram weight is placed on each of them. Calibrating monitors will mean that when you display an image on it, it will always look the same rather than getting the some light/some dark problem you saw in the TV store.
It's a tricky subject to explain (don't worry if it doesn't make sense), but you might like to have look around YouTube for videos on the subject.

Quick preview issues

Similar Messages

Maybe you are looking for