Quick Time will not run on Windows XP PC

When I try starting Quick Time nothing happens. I have tried opening Quick Time information, and after a short time I get the error message "Error when opening Shell32.dll, control_RunDLL C:\Programs\Quick Time\QTSystem\QuickTime.cpl"
I have tried uninstalling Quick Time but always got an error, until I removed all files on C:\Programs\Quick Time and the Quick Time files on the System32 folder, like it was suggested on this Forum.
I then re-installed Quick Time, but I am still getting the same error, and Quick Time wont run.
Are there any other files I should have deleted before reinstalling Quick Time?
Kind regards
Willi Sletten

When trying to uninstall from Start/Quick Time/Uninstall Quick Time the uninstall would start propperly but then end up in a dialogue box saying that a serious problem had stopped the uninstall.
When uninstalling from the control panel, I dont think there was an error message, but Quick Time simply wouldnt disappear.

Similar Messages

Quick time will not install/unistall windows vista fatal error

I am unable to install, unistall, or repair quicktime on my computer with vista.
Before fatal error I see install has insufficient privileges to modify this file:
C:\Program Files\Quick Time\Quick Time Read Me.htm
Any suggestions for removing this software to get a clean install would be helpful?

It will not let me uninstall older versons or install new versions.
Do you get error messages? If so what do they say? (Precise text, please.)

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

HT3523 I have done all my updates & my quick time will not play this new project, what is the problem?

My computer is updated but my quick time will not play a mov. file that i exported from final cut on a different Mac , what is the problem?

Final Cut adds some codecs that are not part of normal OS X. If your movie uses one of these codecs it won't play on a system that does not have Final Cut.
Adding these codecs may help:
<http://support.apple.com/kb/dl1396>
If not, ask in one of the Final Cut forums:
<https://discussions.apple.com/community/professional_applications>

ITunes 10 will not run on Windows 7, 64 bit

I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
(1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
(2) Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?

Test Stand LabView adapter 8.6 run time will not run 8.5 VIs

I’m trying to run a script I developed with a dev computer on
a regular PC set up with a Test Stand User Gui, and run times for Test Stand
and Labview.
With the Test Stand Labview adapter set to 8.6.1 all of my
ENA(Agilent Network Analyzer) calls fail for “VI Version is too early to
convert to the current LabVIEW version.” The ENA library is written in 8.5. If I set the adapter to 8.5.1 then all of the
VIs developed in 8.6 fail. In addition
it will not run any VIs that I save back to 8.5. I installed a demo Labview development
version (2010?) and everything ran fine with the adapter set to Development
System.
I am not sure what to try next to get it to run on the
regular PC, any hints.
Test Stand = 4.2
LabView = 8.6
Running in windows XP
Solved!
Go to Solution.

One of the many things I tried was saving the ENA library to 8.6, but I could not get it work.
This is the Original library I installed and was trying to Convert (8.0 upgrade agena.zip)
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=001CE83736F3674BE0440003BA7CCD...
I am about to try this one. (8.2.1 Upgrade)
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=74D1F1D4EB5268E8E04400144FB7D2...
I am pretty new to labview so I am not sure how to make the save to previous version workfor libraries, but I can easily do it with individual VIs. For libraries, it creates a new directory, and puts in all of the files and then asks me about saving the lib files as something else. This is where I think I get it wrong. I tried it again today and got the same results.
I greatly appreciate the Help
Brian

BB Desktop Software 6.1 will not run on Windows 7 64-Bit

I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is. A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
Thank you all so much in advance once again! (Below is my original plea for help.)
P
Hi.
I have read in these forums and am still lost. I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
I try to be a good lil girl and follow forum rules, but am lost here.
I bought a new laptop, a Dell 17R It runs Win 7 I think. Lots of ROM/RAM. I dowloaded the desktop program from bb dot com and cannot get it to work. First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
It then acknowledged my Torch and dld my photos. Then it decided I didn't have space and undid whatever it did.
NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
I need someone who understands this gobbltygook to explain to me what to do. I need to unload my photos, as I use my phone to take pix more than I would have thought.
I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them. (It took my YEARS to spring for this laptop)
Thank you in advance for your patience.
P

I have the same issue. It gets to a desktop manager picture and just freezes.

Lightroon CC upgrade will not run on windows 8.1

Ran Adobe Creative Cloud updates today, all updates installed and are working OK except for Lightroom, it will not run when opened, no error messages appear and windows trouble shooter reports it as lightroom is incompatible. I have done a complete manual uninstall, reinstalled and the problem still exists. Does anyone have the same problem or a possible fix

Hi
After installing lightroom CC you must sign out and oce again sign in from the creative cloud.
Do this by:
Preferences>Account>Log out from the creative Cloud.
Let me know if it worked.

PSE 5 will not run in Windows 7?

Hi,
I recently upgraded from Windows Vista 32 bit to Windows 7 64 bit - I reinstalled PSE 5 but now it will not run.
I get the following errors:
- Could not load the FastCore Routines module because the file could not be found.
- Could not load the MMXCore Routines module because the file could not be found.
- Could not load the Multiprocessor Support module because the file could not be found.
- Could not initialize Photoshop Elements because the file could not be found.
- The action you have requested could not be completed because the application is not responding. It may still be loading or waiting for a response from you.
I searched for the errors on the forums and found the common responses that the 5.0.2 update needed to be installed. I installed the update but it hasn't fixed the problem.
I also saw that many people had managed to run it using compatibility mode - I have tried running it in Windows Vista/SP1/SP2, Windows XP etc but nothing likes it.
Can anybody please help? I had absolutely no problems with this software before and I'm half tempted to buy PSE 10 (which I can't afford to do) just to save me the hassle.
Thanks in advance.

Hi Laura,
Since you've uninstalled and re-installed PSE5, we have to assume that those files are in the correct location. If someone here has PSE5 installed, it would be nice if they can confirm that.
The next thing to try is disabling Data Execution Prevention (DEP) for the editor:
Use Start...Control Panel...System.
On the left, select "System Protection".
Select the "Advanced" tab.
Click the "Settings" button in the "Performance" section.
Click on the "Data Execution Prevention" tab.
Use the bottom radio button ("Turn on DEP...except those I select").
Click the "Add" button, then browse to the
"C:\Program Files (x86)\Adobe\Photoshop Elements 5\PhotoshopElementsEditor.exe"
file.
Make sure that the editor's file has a check in its box, and do "OK" to back out of all the dialog boxes.
Reboot.
Ken

Firefox will not run on Windows 8.1

I have 3 pcs running 8.1 update 1. all run the same AV software ( Emsisoft). All are identical. However one machine will not run FF27-29. Windows tells me that " this app can't run on your PC". I have uninstalled and reinstalled using the stub and also by downloading a complete installer. Neither have helped.
Any thoughts?

These are the specs of the machine which DOES NOT work.
Operating System
Windows 8.1 Pro 64-bit
CPU
Intel Core i5 2500K @ 3.30GHz 53 °C
Sandy Bridge 32nm Technology
RAM
8.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co., Ltd. P67X-UD3-B3 (Socket 1155) 39 °C
Graphics
VX2433wm (1920x1080@60Hz)
VX2433wm (1920x1080@60Hz)
1023MB NVIDIA GeForce GTX 550 Ti (Gigabyte) 38 °C
Storage
1397GB SAMSUNG HD154UI ATA Device (SATA) 29 °C
465GB Western Digital WDC WD5000AAKS-00TMA0 ATA Device (SATA) 38 °C
1863GB Western Digital WDC WD20 02FAEX-007BA0 SCSI Disk Device (SATA) 37 °C
931GB Samsung STORY Station 3 USB Device (USB (SATA)) 41 °C
2794GB Western Digital WD My Book 1140 USB Device (USB (SATA)) 37 °C
931GB Western Digital WDC WD1002FAEX-00Z3A0 ATA Device (SATA) 38 °C
931GB Western Digital WDC WD10EARS-22Y5B1 ATA Device (SATA) 37 °C
1863GB Western Digital WDC WD20EADS-32S2B0 ATA Device (SATA) 37 °C
465GB Western Digital WDC WD5000AAKS-00TMA0 ATA Device (SATA) 37 °C
698GB SAMSUNG HD753LJ ATA Device (SATA) 30 °C
1863GB Western Digital WDC WD20 02FAEX-007BA0 SCSI Disk Device (SATA) 37 °C
931GB SAMSUNG HD103UJ SCSI Disk Device (SATA) 37 °C
1863GB Western Digital WDC WD20 02FAEX-007BA0 SCSI Disk Device (SATA) 37 °C
14GB Lexar SD USB_3_0 Read USB Device (USB)
Optical Drives
ASUS DRW-1814BLT ATA Device
Audio
High Definition Audio Device
Her are the specs of a machine which DOES work..
Operating System
Windows 8.1 Pro 64-bit
CPU
Intel Core i7 930 @ 2.80GHz 58 °C
Bloomfield 45nm Technology
RAM
12.0GB Triple-Channel DDR3 @ 532MHz (7-7-7-20)
Motherboard
Gigabyte Technology Co., Ltd. X58A-UD3R (Socket 1366) 44 °C
Graphics
L997 (1600x1200@60Hz)
SyncMaster (1600x1200@60Hz)
2047MB NVIDIA GeForce GTX 660 (Gigabyte) 40 °C
Storage
119GB ADATA SX900 (SSD) 33 °C
29GB A-DATA SSD (SSD)
279GB Western Digital WDC WD3000HLFS-01G6U1 (SATA) 36 °C
1863GB Western Digital WDC WD2002FAEX-007BA0 (SATA) 40 °C
931GB Samsung STORY Station 3 USB Device (USB (SATA)) 43 °C
1397GB Western Digital WD 15EADS External USB Device (USB (SATA)) 41 °C
Optical Drives
HL-DT-ST DVDRAM GH22NS50
Audio
High Definition Audio Device
I hope this helps!
many thanks

TS2363 latest version of itunes will not run in windows 8.1 after download

Just downloaded the latest version of iTunes and it will not open in Windows 8.1. Error is entry point not found.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Quick time will not open

I purchased Quick time Pro in July, used it successfully to view and edit .mov files. Now all of a sudden it won't open, the error message reads: Your copy of Quick time 7.02a63 & quick time player 7.0.2a63has expired. Go to apple.com......to download and install a new version.
Tried to install an upgrade from the apple site last night and now Camedia wont open either. Any suggestions?

QuickTime 7 will not install on a PC using the ME OS.
It requires Windows 2000 or XP. If you're really using ME, as suggested in your profile, you'll need to upgrade your OS first.
I don't know what to tell you. I don't think the Public Preview of QuickTime 7 would install on an ME OS so you must be using something different.
The "Camedia" software is used by the Picture Viewer software of QuickTime. Maybe setting the association for jpeg's (or whatever your camera produces) to another application may help you sort this issue out.

Quick time will not operate in firefox. Can this be fixed?

trying to play audio files in firefox with quick time. They will not work, nor do the quicktime boxes show up.

Please make sure your QuickTime player is correctly installed and Firefox is ''not'' running in Safe Mode.
Then go to about:plugins and check for "QuickTime Plug-in". If you don't see that plugin, it means your QuickTime setup is broken or missing.
In this case we recommend you to uninstall QuickTime, download again latest Quicktime package from Apple website and try to install it again.
If the problem doesn't solve with that, you could check QuickTime Alternative, a free alternative to QuickTime which may solve your problem.
If nothing of above solved your problem, we need further information about the problem (whether a blank / black frame appears or not where QuickTime should load, a error message displays, Firefox doesn't detect QuickTime plugin...).

JDeveloper will not run in Windows NT 4.0

I have installed Oracle 9i Developer Suite (latest download) many times on a Windows NT 4 machine. JDeveloper just will not start!
I get the same error every time: "Unable to find main class. Class specified is: oracle/ideimpl/IdeMain"
I installed the same download on a Windows 2000 machine. JDeveloper starts up fine, no problem. So why won't JDeveloper work on Windows NT 4? Service Pack 6a is installed.
Richard Brown

We've got Jdev versions including latest running on NT fine.
Make shortcut of where you installed Jdev/jdev/bin/jdevw.exe and
copy that shortcut to your desktop. That's it, beyond unziping "with directory's"
onto some drive you have space on.
Maybe Jdev's dir structure was lost when you unziped, or you're launching the
wrong bin/<thing> ??
Good luck,
curt

Quick Time will not run on Windows XP PC

Similar Messages

Maybe you are looking for