Quicktime broadcaster getting a timeout error.

Greetings,
I have setup quicktime broadcaster and feel that I have everything running properly however when I try to connect to my broadcast via the internet I get an open quicktime window showing "waiting for media" with a count up to 8 then back to 0 before it shows "Timed out".
I have tried using TCP and UDP but the condition persists.
I opened up ports 554 and 7070 neither of which is blocked.
Port mapping directs those ports to the server via airport extreme.
I get no error messages on the server
If I try to connect by using rtsp://mywebsite.com/link.sdp I get "waiting for media" with a the timeout message in the white quicktime window with the blue quicktime logo.
If I try to connect by via rtsp://mywebsite.com:80, a black quicktime window opens and it says disconnected.
Any help would be appreciated.
Thanks

Hello Lynn,
Thanks for your help
With the P2-4x-4k40 camera file, I get a warning that the camera file does not support the IMAQ device I have selected (see attached pics)
If I click on yes to add the interface, I get an error saying there was a problem and end up with an empty camera file
I've found I can load the Dalsa P2-2x-2k40 camera file and it 'works' if I turn down the width to 1024, in that it doesn't time out. I do get a completely black image though.
According to the specsheet this camera has four taps but there's only two set up in the camera file and it doesn't seem to be possible to change it.
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Attachments:
error.png ‏6 KB
error2.png ‏6 KB

Similar Messages

When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message.

When I try to open video files purchased through iTunes in Quicktime, I get the message: 'Error 23132: an unknown error occurred. This never happened until I updated iTunes, but when I try to go back to the previous version, I still get the message. It is more convenient for me to play videos in Quicktime since iTunes is such a memory hog. Please help.

You may get better results if you switch to this alternate version: iTunes for Windows (64-bit - for older video cards) and, if needed, reinstall QuickTime. The new (nearly) all 64-bit version doesn't seem to play well with QuickTime. Perhaps if DRM authentication is required QuickTime needs to be able to see something that is part of the older 32-bit code.
tt2

I am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

i am getting CONNECTION TIMEOUT error in my macbook(10.7.4).plzzz help me

Thank you very much, i guess it will be the remote servers.
Then i got this critical error on my local server
Automatic mail message send from usa12 for SID USA on Fri Dec 15 15:00:01 EST 2006
DONOT REPLY FOR THIS MESSAGE.....
Please check the follwing files ( will exist if there was an error )
/u01/app/oracle/admin/usa/bdump/alert_usa.log.121506.1500 ......
/u01/app/oracle/product/8.1.7/network/log/listener.log.121506.1500 .....
ORA-00600: internal error code, arguments: [17182], [27793076],
I know i need to contact oracle , when i went to Metalink ,i needed to run their RDA it is like diagnostic report script and include it before u send to them.
I needed some permissions from my Senior so i will do it on monday.
do you have any suggestions????

All of a sudden I cannot Forward emails in TB 31.1.2 - I get SMTP timeout error

And I've tried everything. Shutdown Emsisoft virus prot., turned off firewall, got into Verizon router (btw, I'm going right into the Verizon router-not thru a switch), no port forwarding, even tried to forward an email in Safe mode in Win 8.1 x64. This just happened. I can Write an email OK (i.e., from scratch), but just forwarding, even a small text message won't forward. I even installed an older version of TB. HELP! HELP!
I either get the SMTP timeout error or I get "check your email and messaging settings." My wife has the exact same setup in TB 31.1.2 but she uses Win 7 x86. -gg

This has been reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
Several other people have sent in the same support request as you, noting this happened after they upgraded to version 31.1.
The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
'''This happens in Thunderbird 31.1.0 when your mailing list description includes several words separated by spaces.'''
Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
* While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
* Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).
'''About automatic updates'''
Automatic updates are the default in Windows.
You can [https://support.mozilla.org/en-US/kb/configuration-options-updates?esab=a&s=automatic+updates&r=1&as=s customize such behavior], however, it's under '''Tools > Options > Advanced > Update'''.
My suggestion would be to set it to '''Check for updates, but let me choose wether to install them.''', specially if you depend on email for critical / important business or personal matters.

Quicktime Broadcaster - getting it online

I'm trying to work out how to stream my webcam live onto my website.
I have installed QTSS and Quicktime Broadcaster, and managed to set it up so it can be viewed around my home, but I have no idea how to get it out and onto the internet or embed it into my site (after a LOT of searching Google).
Can anyone explain?

We were using two Canopus ADVC110 Video converters as I have medical use which is allowed for these devices. This is also the reason I cannot use other video converters at the moment. We were streaming H.264 only as plain MPEG4 would not have met our bandwidth restrictions without serious danger of massive dropouts. (A different story, not QuickTime's fault.)
With a Testbild (bars and tone) I actually didn't have a problem, even for prolonged periods. Maybe because the Testbild was came from the SONY betacam we used. Quality was nothing short of stunning. With the ultrasonic echo-scanner image locked I experienced problems with the upstream breaking after a few minutes. Maybe also because this stream was video only.
I'll try and experiment with UDP upstreaming if that helps with the disconnects.
MacLemon

Why is my startup script getting a timeout error in FrameMaker?

Using FM 11
ExtendScript
Windows 7
I'm running an ExtendScript from the FM Startup directory, by starting FM from a batch file. The Extendscript opens multiple book files (one at a time) and does a save as pdf for each one. FrameMaker terminates the script with a timeout error at random points in the script after only one or two saves. The Extendscript runs fine when I run it from the FM Scripting window. It only times out when I run it as a startup script. Is there some workaround for this? Sadly, I find no documentation about this.

Thanks, Rick. Here is the body of the Extendscript that is in the FM Startup directory. The batch file starts FM and then this script gets kicked off.
main();
function main() {
    log("Starting the script.");
    var controlFile = File("G:\\fmToPdf\\fmToPdf.control");
    var controlContent = null;
    if(controlFile.exists === true) {
        // Open the file.
        controlFile.open("r"); // r means read only.
        // Read the file contents into a variable.
        controlContent = controlFile.read();
        // Close the file.
        controlFile.close();
    var bookRegEx = /^book="(.*)"/;
    var targetRegEx = /^target="(.*)"/;
    var pathRegEx = /([^\\]+)$/;
    var lines = controlContent.split("\n");
    for (i = 0; i < lines.length; i++) {
        var line = lines[i];
        if (bookRegEx.test(line) === true) {
            var result = line.match(bookRegEx);
            var inBook = result[1];
            var pathComponents = pathRegEx.exec(inBook);
            var fileName = pathComponents[1].replace("book", "pdf");
            for (i = i + 1; i < lines.length; i++) {
                line = lines[i];
                if (targetRegEx.test(line)===true) {
                    result = line.match(targetRegEx);
                    var outBook = result[1] + fileName;
                    log("Starting to generate: " + outBook);
                    fileId = openBook(inBook);
                    saveBook(fileId,outBook);
                    closeBook(fileId);
                    log("Finished with: " + outBook);
                } else {
                    break;
    // close FrameMaker
    Constants.FF_CLOSE_MODIFIED = 1;
    app.Close (Constants.FF_CLOSE_MODIFIED);
    log("We're done.");
    return;
function openBook(filename)
    var openProp = GetOpenDefaultParams();
    var retParm = new PropVals();
    var BookOpen=Open(filename,openProp,retParm);
    return BookOpen
// save as pdf
function saveBook(file, pdfName)
    var saveProp = GetSaveDefaultParams();
    var i = GetPropIndex(saveProp, Constants.FS_FileType);
    saveProp[i].propVal.ival = Constants.FV_SaveFmtPdf;
    //i = GetPropIndex (saveProp, Constants.FS_DontNotifyAPIClients)
    //saveProp[i].propVal.ival = true;
    var retParmspdf = new PropVals();
    // pdf settings
    file.PDFBookmark = true;
    file.PDFBookmarksOpenLevel = Constants.FV_PDFBookmarksOpenDefaultLevel;
    file.PDFConvertCMYKtoRGB = true;
    file.PDFDistillerAbsent = 0;
    file.PDFJobOption = "High Quality Print";
    file.PDFSeparateFiles = false;
    file.DocIsViewOnly = 1;
    file.Save(pdfName, saveProp, retParmspdf);
    return
// close file
function closeBook(filename)
    filename.Close (Constants.FF_CLOSE_MODIFIED);
function log(message, reset)
    var logfile = File("G:\\fmToPdf\\fmToPdf.log");
    var openMode = (reset === undefined) ? "a" : "w";
    logfile.open(openMode);
    logfile.writeln(getTimeStamp() + " " + message);
    logfile.close();
function getTimeStamp(){
    var d = new Date();
    var timestamp = d.getFullYear() + "." +
                    zeroFill ((d.getMonth() + 1), 2) + "." +
                    zeroFill (d.getDate(), 2) + " " +
                    zeroFill (d.getHours(), 2) + ":" +
                    zeroFill (d.getMinutes(), 2) + ":" +
                    zeroFill (d.getSeconds(), 2);
    return timestamp;
function zeroFill( number, width )
width -= number.toString().length;
if ( width > 0 )
    return new Array( width + (/\./.test( number ) ? 2 : 1) ).join( '0' ) + number;
return number + ""; // always return a string

Getting PROBE TIMEOUT Error....please help me out...It is urgent

Hello,
I'm running a stored procedure in oracle 10G that select data from one table and inserts the selected data into another table. The procedure populates for a short while and then I get the following messages:
1. probe: timeout Occurred
2. probe: Exception raised in the DBMS_DEBUG package
Why is this happening and what should I do to resolve the above issue?
Please help me out....This is really urgent...
Thanks a lot in advance....
Regards,
Suranjita

Please check Database alert log to see if any error is raised ?

Getting ditributed timeout error

Hi,
when i 'm executing a procedure using dblink i'm getting following error
ERROR at line 1:
ORA-02049: timeout: distributed transaction waiting for lock
ORA-02063: preceding line from PROD
ORA-06512: at "PURGE.PURGEPERSON", line 111
ORA-06512: at line 1
the procedure consists of statements like
INSERT INTO OLD_CARDIO_SET
SELECT /*+ rule */
ishadmin.OLD_CARDIO_SET.*
FROM
ishadmin.CARDIO_WORKOUT@prod,
ishadmin.CARDIO_ACTIVITY@prod ,
ishadmin.CARDIO_ACTIVITY_CHANGED@prod,
ishadmin.OLD_CARDIO_SET@prod
WHERE ishadmin.CARDIO_WORKOUT.workout_nr = ishadmin.CARDIO_ACTIVITY.workout_nr
AND ishadmin.CARDIO_ACTIVITY.activity_nr = ishadmin.CARDIO_ACTIVITY_CHANGED.new_activity_nr
AND ishadmin.CARDIO_ACTIVITY_CHANGED.change_nr = ishadmin.OLD_CARDIO_SET.change_nr
AND ishadmin.CARDIO_WORKOUT.person_nr = pPersonNr;
vCount := SQL%rowcount;
DELETE /*+ rule */ ishadmin.OLD_CARDIO_SET@prod WHERE change_nr IN
SELECT /*+ rule */
ishadmin.CARDIO_ACTIVITY_CHANGED .change_nr
FROM
ishadmin.CARDIO_WORKOUT@prod,
ishadmin.CARDIO_ACTIVITY@prod,
ishadmin.CARDIO_ACTIVITY_CHANGED@prod
WHERE ishadmin.CARDIO_WORKOUT.workout_nr = ishadmin.CARDIO_ACTIVITY.workout_nr
AND ishadmin.CARDIO_ACTIVITY.activity_nr = ishadmin.CARDIO_ACTIVITY_CHANGED.new_activity_nr
AND ishadmin.CARDIO_WORKOUT.person_nr = pPersonNr
can anyone please help me and suggest me how to avoid this error
Thanks

02049, 00000, "timeout: distributed transaction waiting for lock"
// *Cause: exceeded INIT.ORA distributed_lock_timeout seconds waiting for lock.
// *Action: treat as a deadlock

Whenever I try to open iTunes or QuickTime I get an "Application Error"...

Here's the deal this is the message I get immediately after clicking on iTunes to open:
"iTunes.exe - Application Error
The instruction at 0x6f437663 referenced memory at 0x6f437663. The
memory could not be read.
Click on OK to terminate the program."
And when I do the same to view a QuickTime movie:
"Microsoft Visual C++ Runtime Library
Buffer overrun detected!
Program: C:\Program Files\Quicktime\QuickTimePlayer.exe
A buffer iverrun has been detected which has corrupted the program's
internal state. The program cannot safely continue execution and must now be terminated."
iTunes was working fine until today and started giving me issues so I went through and uninstalled, used the Windows Install Cleaner, restarted the comp and redownloaded/installed iTunes 7.5 and still the same thing. Any help is great... thanx!

Settings>iTunes & App Store. Tap on the Apple ID. Tap Sign out. Log back in with yours.

I get a timeout error when installing flashplayer

I use:
HP Pavillion ze4500
2Ghz Athlon Processor
1GB Ram
Windows XP service pack 3
IE8
Opera 12.15
This morning, 2 things happened when I went to Youtube using IE8: I got a message saying IE8 was no longer supported on Youtube & that I needed the latest version of flashplayer installed (I've got a screenshot of that!). When I tried to get the lastest version, it wouldn't complete installation, the installer indicated "download timeout" (I've got screenshot!). I tried using one of the other download options offered on this site's help section and verified that I got the latest version installed (I have screenshot!). However, Youtube still gives the same message about needing flashplayer.
Next, I tried using Opera. I got no message saying Opera wasn't supported and no message saying I needed flash player, but video was choppy when played. I tried downloading flashplayer using Opera, but still got a "download timeout".

Download and run the offline installer(s) from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

On financial site which worked perfectly in IE for many years, I get immediate timeout error after entering my ID and password. Does not happen every time and multiple retries do not work.

I have used the PrimeVest web site to keep track of my IRA for several years now. For most of that time I have used Internet Explorer and have had no trouble. I have a link to that site pasted onto an Excel spread sheet and I click on that link daily to get my present balance. I have been doing it this way for years and have had no trouble while using Internet Explorer.
I recently installed the Firefox browser on my new laptop and have switched to using it as my default browser. When I click on that link now and enter my account number and password, sometimes it works OK in Firefox and sometimes it gives me a message saying "Your session has timed out. Please Log In Again." I have tried multiple times to re-enter the account number and password but always get the same message. Closing Firefox and reopening it produces the same result. I have even tried shutting the computer completely down and restarting it, but I got the same result. I can not find any pattern or reason to the days when I can use Firefox and the ones when I can not. The only way I have been able to log on to this site on those days is to past the link into Internet Explorer.
I do the same thing with several other financial sites and have not had any trouble with them and Firefox.

Thanks for the response.
I attempted to remove cookies, but I can not identify any of the cookies on the list with the PrimeVest web site. No PrimeVest, no PVs, nothing that looks like it came from them.
I have also reported the problem to PrimeVest and their tech did answer. He suggested erasing the browsing history (temporary internet files), which I did with no effect. He also had me check for the correct starting page address, which was OK. He stated that they are aware of a problem and it is on their list. No indication of how far down that list though. His only cure was to use IE for now, which I was already doing. Perhaps he can tell me which cookies to remove.

Cannot convert pdf file to Word using Adobe ExportPDF online...I get a timeout error after a wait of about 15 minutes

Oh...BTW...I am using Windows 7 with Chrome browser and I disabled text recognition. The file is 3.7 MB. It says it failed because it is taking too long to process however the Adobe export PDF notes that it can convert unlimited files to Word or Excel files. Anything else I can try? I exported it to Adobe.com and tried toconvert it there but it looks like the same process...and with the same result.

Hi there,
It sounds like there may be an issue with the quality of the PDF. Not all PDFs are created equal, and especially those created from scanned documents can be problematic if the scan quality isn't the best. Is there a dark background on the PDF, or stray marks or smudges?
You can try converting with OCR disabled at outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. But, while that's a good test to find out where the problem lies, you'll end up with a Word document that isn't editable, so it's not an optimal solution.
Please let us know how it goes.
Best,
Sara

When connecting to wifi, I get a "Connection timeout" error message.

I'm trying to connect to a WEP password wifi signal. I have the password, but when connecting, I'm getting a connection timeout error message. Please help?

I'm having the exact same problem. Yesterday it was fine, but today, I get connection timeout error message. Help?

Frame timeout error using Configure Trigger3.vi

Hi all,
I'm triggering the frame capture of an .avi with an RTSI connection. However, I keep getting a frame timeout error when I use the IMAQ Configure Trigger3.vi. I don't get any timeout errors when I just use the IMAQ Generate Pulse3.vi but I am trying to sync the frame capture to an optical switch. If I just use IMAQ Generate Pulse3.vi, I get a .avi but the frames are completely out of sync with the switch, but if I use both IMAQ Generate Pulse3.vi and Configure Trigger3.vi I get nicely separated images but it takes an age and ends up in a timeout error.
I want to capture e.g. 500 frames, over the course of 2 s - so I've set my frame timeout to be 2000. At my current acquisition rate (31680 Hz per line (1024 pixels)) 500 frames corresponds to a total of 1.578 s (images are 100 pxls in height). This is much less than the total scanning time. Where am I going wrong?
Thanks in advance for your help.
Miika
Attachments:
screen.png ‏32 KB

Hey Miika
What are the hardware you are using. These vi's only work with specific hardware and this may be why they are not functioning correctly. For example the Configure trigger3 vi only works with the following PCIe-1427, PCIe-1429, PCe-1430, PCIe-1433.
Matthew Trott
Applications Engineer
National Instruments UK
www.ni.com/ask

IRQ timeout error while executing the custom personality fpga in veristand

Hi,
I have gone through the below link and created a custom fpga code to write analog output and digital output through NI 9269 and NI 9472 card respectively.
NI Veristand add on - fpga configuration editor.
https://decibel.ni.com/content/docs/DOC-35499
i was able to import the .fpgaconfig file in veristand system definition window.
When i execute the code, i am getting IRQ timeout error.
Could any one help me how do i debug this error?
i am interested to see how the veristand host code is executing it.

Hi,
Have you tried to simplify the FPGA code? If the issue is related to the VCE, you should post there :
- https://decibel.ni.com/content/message/67188#67188
The developers of this tool will answer you.
Posting the error message or the FPGA code will also help us
Regards,
--Eric

Quicktime broadcaster getting a timeout error.

Similar Messages

Maybe you are looking for