Quicktime converting .avi files

Hi
Most times when I try and play .avi files in Quicktime I get a message saying 'converting'.
It takes ages to do so and when or if it finally does convert the sound is severely out of sync.
I am running a new Macbook Pro and have Quicktime 10.3 and have installed Perian for codecs.
Can anyone help?

Files encoded using modern and standards-based codecs such as H.263, H.264, MPEG-1, MPEG-2, MPEG-4, JPEG, and Apple ProRes open in QuickTime Player without being converted. When opening media files that use older codecs, QuickTime Player in Mavericks automatically converts them into a new QuickTime movie.
You can use QuickTime Player 7 that plays many older media files without conversion, but it's recommended that you convert important older files to newer formats whenever possible. Download QuickTime Player 7 for Mavericks from here.

Similar Messages

Converted .avi files to .mov in quicktime, can't transfer to ipod.

so i recently converted .avi files to .mov using perian in quicktime. i imported them into itunes, and they play just fine there. unfortunately, they won't load onto my ipod. i get an error that the format is not recognized by my ipod. has anyone had this issue? if so, am i doing something wrong, and/or how can i correct this? i'm using a 2 ghz powerpc g5, and a 160 gb ipod classic. thanks!

You need to convert to MPEG-4.
(55389)

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

Converting AVI files to M4V files in Quicktime Pro

Hello,
I am trying to convert AVI files to M4V files in Quicktime Pro.
I open the file in the player, click Save As, click the setting, and it goes through the process and stalls with 5 seconds left. Anybody experience this?
Thanks, Steve

I open the file in the player, click Save As, click the setting, and it goes through the process and stalls with 5 seconds left.
If you are really using QT 7 Pro under Leopard, then be advised that the "Save As..." does not trascode AVI content (whatever its compression formats) to H.264/AAC in an M4V container but merely places the original content in an MOV file container. In this case, if the file stalls in the last 5 seconds, then the problem is usually associated with a problem of trascoding the audio or a problem writing/closing the MOV file. This could be caused by anything from a lack of audio codec support, a component conflict, or File level Finder problem.
If you are actually using QT X under Snow Leopard, then the "Save As... > Movie" option functions essentially the same as the QT 7 Pro "Save As..." option already described above. Selecting one of the other options that do transcode the content may have the same problem described above or may encounter a "bug" which causes the final file to "disapprear"/never be made visible at the Finder level.
If using QT 7 Pro under either Leopard or Snow Leopard, ensure that the compression formats used in the AVI container are actually supported by your system configuration. If you have recently upgraded your OS from Leopard to Snow Leopard, you may wish to re-install your AVI support component(s) and ensure there are not known or obvious component conflicts. If using QT X under Snow Leopard, you may wish to install QT 7 (if you have a "Pro" key" or try the free MPEG Streamclip as a QT 7 "Pro" alternative.

Hi just converted avi file to mp4 the film will play but there is no sound help please

hi
Just converted avi file to mp4 the film will play but there is no sound help please.
Thanking you

First repair your QuickTime from Control Panel and see if it helps.
If not, refer to this article to troubleshoot:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

Can You Convert .avi files to go onto itunes.

I was wondering if there is anyway to convert avi files to whatever file it needs to put on a ipod?
Thanks!

I was wondering if there is anyway to convert avi files to whatever file it needs to put on a ipod?
Use an application like MPEG Streamclip (free), QT Pro ($30), GarageBand (part of iLife), etc to access the built-in iPod export preset. Specific access instructions vary by application.

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Converting avi files with videora

When i try to convert an AVI format video with Videora it doesnt work. I click start and then it just says transcode complete, but when i check for it, it isnt there. Is there any other way to convert AVI files?

Hopefully in answer to the many posts on “how to get various video formats onto your iPod” I have put together a summary of applications I use. I have tried a few others with varying amounts of success (some of which are free) - I have finally plumped for the software produced by Xilisoft as providing good quality video relatively affordable cost for use withPC’s and numerous MS operating systems. The link below takes you to their site which not only allows you to download trail versions of their software but also has a comprehensive set of tutorials and FAQ's for their iPod video conversion software.
I have regularly used these applications to convert various file formats to iPod friendly video. They are simple to use although frequently processor and RAM hungry:
Use Xilisoft iPod Video Converter if you want to:
[*]Convert various video file formats to MP4
[*]Convert most audio file formats to MP3
[*]Extract audio from video file and save to MP3
[*]Encode several files simultaneously
[*]Pause encoding process to run other CPU time consuming programs at any time
Supported file formats:
Video:
[*]MPEG(mpg, mpeg, dat, vob); WMV; ASF; AVI; QuichTime(mov, qt); MPEG4(mp4); 3GP; DV(dv,
dif); Real Video(rm); Animated GIF(gif - decoding only); Macromedia Flash(swf - decoding
audio only);
Audio:
[*]MPEG Audio(mp2, mp3); WMA; WAV; AU; MPEG4 Audio(m4a); Real Audio(ra); OGG; AAC; Raw
AC3(ac3); NUT Open Container Format(nut);
To convert DVD's to an iPod friendly video format:
Use Xilisoft DVD to iPod V4:
[*]Just pop the DVD in your drive select compression variables (default settings work well) and sit back!
All these products are available on a "try before you buy basis", yes there are applications for XP which are free but and may work just as well but I have converted many hours of video for my iPod without hassle using the Xilisoft products (no I don't work for them!). Check there web site HERE
MB67

Converting AVI files to iPod M4V files?

I just purchased QTPro to convert AVI files to viewable files on my iPod nano. Is there a size limitation when converting these files. I was able to convert a smaller file and then import it to iTunes then to the iPod, but the larger file I really want to move to the iPod will not finish converting to the M4V. I gives me an error message.
I using Tiger G4 with 640MB of RAM
Thanks

Any thoughts on how to fix this? I was hoping to automate this process, but the files produced aren't useable...
If the audio is MP3, AC3, or similar compression format, then try using MPEG Streamclip instead. MPEG Streamclip also allows batch processing if the files will export with audio from it. As to QTP, hang on to it. MPEG Streamclips is better at handling MPEG-1 audio layers, AC3, and many sequential actions, but QTP is still best for layering multiple audio and video tracks. The two applications generally complement each other well.

How can i make quicktime play avi. files?

pls..how can i make quicktime play avi. files? because i have some avi files on my ipod or data cd but i can't play them on my laptop. pls help me..
and also, im trying to make a music video but i dont how to select different clips from a movie.

Hello,
You can get from Microsoft, the flip4mac free player. Since Windows Media Player for Mac is no longer supported, this is the way to go.
http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
In my opinion, it is by far the best solution for playing .avi or .wmv files, because you get all the advantages of Quicktime.
regards,
Jeff
PowerBook G4 15-inch Double-Layer SD (with lines) 1gb Mac OS X (10.4.6) 3G iPod, iPod Nano, 5G iPod

How to convert AVI-files to work on the Nano

How can I convert AVI-files to work on the Nano? What file-type does it support and what software do I use to convert the files?

Hello RoyalOak,
Compatible video formats for your iPod can be found on your iPod's specs page, which can be found below. However, I decided to include the long list in this thread anyways, so here it is.
_*Compatible Video Formats*_
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
http://www.apple.com/ipodnano/specs.html
There are several third party applications available to help convert your movies to a more iPod friendly format. Here are a few.
[HandBrake|http://handbrake.fr>
[MPEG Streamclip|http://www.squared5.com>
Once you have the videos in an iPod friendly format, import it into iTunes, configure your iPod to sync videos, and then be on your way.
B-rock

Converting avi files so I can view on apple tv

I am very very new to the mac world so please don't laugh! How do I convert avi files to a format I can view on my apple tv. I have recently purchase a macbook pro. Do I simply download software?? thanks so much, Karen

There are many video conversion options out there, but many of the better tools are free such as MPEGStreamclip. From memopry there may be an AppleTV preset in MPEGStreamclip.
AppleTV1/2 use an MPEG-4 variant called h264 on the whole for stuff purchased from iTunes store. They will play more basic MPEG-4 but not at as high a resolution as h264. MJPEG is also supported on ATV2 but I suspect this is for some digicam files.
See specs here:
http://www.apple.com/appletv/specs.html
Another good free format converter is Handbrake which may also be worth a shot. It has presets for AppleTV 1 or 2 and is quite straightforward.
Worth noting that video conversion, especially to h264 format, can be time consuming.
AC

HT3775 How to convert .avi files to .w4v files?

Does anyone know of an easy way to convert .avi files to .w4v files please?
Thanks
Michelle

Miss Moist wrote:
...it says it is from an unidentified developer. How's that then???
Michelle ~ That's Apple's app security system called Gatekeeper — you can read about it here:
OS X: About Gatekeeper
Gatekeeper was introduced in Mac OS X (10.7.5) but your products list indicates you're using Mac OS X (10.6.4). So... Click on the  menu at top left of your screen and choose About This Mac. Then under OS X, note the version in the form 10.n.n and then see this ASC tutorial:
Update your product list

Converting avi files to use on ipod

does anyone know of a free program to convert avi files to use on my pod
i sed to use isquin but it doesnt seem to work anymore- got a video ipod with no videos on it!
thanks

I have never been able to get Handbrake to recognize many file formats, at least not the version that runs on Tiger.
MPEGStreamclip; you need to export the file. I don't have an ipod so I don't know what format.
My feeling is that you might get more concrete assistance if you asked this on an ipod forum. At least there everybody will likely own one. On the other hand they may therefore also be able to afford the newest computers and tell you to run something on a newer OS.

Convert avi files to mpeg

Is it possible to convert avi files to mpeg files?
Kenneth

AME = Adobe Media Encoder.
If you can please provide more detail about the proposed workflow, we can offer more detailed, targeted responses. What are the video source specs? What do you wish to do with the MPEG files?
Thank you
Jeff Pulera
Safe Harbor Computers

Quicktime converting .avi files

Similar Messages

Maybe you are looking for