Quicktime Frames Play in iMovie but Not Exported File

I recently imported a quicktime movie clip (.mov) into imovie to use in a new project. I added the quicktime frames to the project and when I viewed the project in imovie everything displayed as expected. When I exported the project to itunes and tried to play, only the still images that were included in the project were displayed, none of the quicktime movie frames were include. I figured maybe itunes didn't like the quicktime frames so I exported the project as a quicktime movie and the original quicktime frames still did not display.
I'm new to mac so I really stumped as to what I could be doing wrong. I was simply trying to create a screencast so I used snapz to create the original quicktime movie, could that be it?
Please help!

Yes. There are many posts here on this issue, but it is not always obvious how to search for them. Snapz by default uses the Animation codec, which in iMovie exports as a black screen. The solution is to 1) convert your clip to a supported codec, and 2) for future clips created in SnapzProZ, use a supported codec like h.264, AIC, etc.
For posts by the experts on this topic, do a search on "Animation Codec" in this forum.

Similar Messages

Audio ok when playing on computer, but not there when playing on DVD player

I've made two DVDs on my MacBook: one where I dragged a variety of short films into iDVD (imported via iMovie but NOT edited on iMovie!) and burned it - this one plays fine on everyone's computers and DVD players. The second DVD I created with material edited in iMovie and then burned via Share -> iDVD and while that plays fine on my computer, the audio is "missing" when I play it on a regular DVD player.
I burned the DVDs the exact same way, used the exact same DVD stock, and played on the exact same DVD player, so what's going on? I don't think it's an iDVD problem, I think there's something (not) happening in iMovie...
MacBook Mac OS X (10.4.8)

What format is the original?

ITunes purchased song plays in iTunes but not on iPod

I have purchased several songs from the music store. One of the songs will play in iTunes but not on my iPod. I've removed the song several times from the iPod and resynced with iTunes, but the song still cuts out in the middle of the song. What should I do?

If it's just a problem with that song, I would contact the customer service who may authorize another download.
http://www.apple.com/support/itunes/store/download/#form

Music video plays in itunes but not on ipod

hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.

it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hi i am putting photos in my project it will play the videos but not the photos never had a problem before

hi i am putting photos in my project it will play the videos but not the photos i have not had a problem with this before

If you haven't tried re syncing the apps using iTunes..
Connect the iPad to your computer. Select it under Devices left side of the iTunes window. Select Apps from the menu, make sure the boxes next to those apps are selected then click the Sync button bottom right side of the iTunes window.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason

I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.

I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.

Created project in PE4, burned to DVD - plays on Computer but not on DVD Player.
Vista Ultimate
Let me know what other info you need.
Thanks for your help.

Yes, the lowest possible Burn speed will be a step in the direction of compatibility.
As for the Quality setting, Robert Johnson has done tests on various versions of PE and has recommend a setting of about 7.8 (IIRC). Unlike Encore, where one has many more choices, PE limits one to a Quality setting of 8. This is about equivilent to the recommend 7MB/s in Encore. Robert found that just below the 8 max. actually yielded slightly better results, than did the full 8, on his tests.
The three things that help to insure the greatest compatibility with set-top players are, and in pretty much this order:
1.) Quality media - Verbatim, Taiyo Yuden or Falcon (US only)
2.) Burn speed (slower is better. It might take a few minutes more, but if it works, you don't have returns or have to do it again.)
3.) Bit-rate around 7MB/sec
Remember - no set-top player HAS to play any Burned DVD. Most do, but some just do not - only replicated, pressed discs. Also, some player are still sensitive to the -R and +R media types. This is less a problem with newer units, however it still could be an issue with many older ones.
Personally, I test a "master" on four different players, plus my computer, before I Burn a batch, or ship out any. One unit is a very high-end Marantz, another is a mid-level Marantz, one is an RCA "el cheapo" and the other is an older Pioneer. I figure if the disc plays everywhere, there is a good chance that it will play for the client - though there are still no guarantees.
Good luck,
Hunt

Why does CD burned as "audio" only play in computers but not car?

I've done all the troubleshooting steps but to no avail. My CDs burned from iTunes play in computers but not in cars. Help!

Some car stereos can't handle anything other than commercially pressed CDs. I find that burned CDs have a limited playable lifespan for my car and have been told by my dealership that the stereo is not rated to play CD-R discs (but that hasn't stopped me). There's something about the fact that home burned CDs are dye-based whereas commercially burned CDs have more of a metal layer abalated write done that makes them more reliable to read.
You might have to look into replacing your stereo with one that can handle CD-Rs. Crutchfield is a good place to research them and the included install kits are great.

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

I can see other accounts on home share and play the songs, but not drag them to my account. Home share is on "on" on both accounts and both computers are authorized. What can I do to copy the song from account to account?

okasy if you want to move the music from the other comptuer into your comptuer you can > but if they were purchased with a different APPLE id then you need to authorize the comptuer to play them .
http://support.apple.com/kb/HT4527
click homesharing > shows how to move the song onto your comptuer

Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

Install Flip4Mac which allows you to play wmv files.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

Took backup of data files and controlfile but not archive file db is 11g xe

took backup of data files and controlfile but not redo file db is 11g xe r2..was trying complete shut backup,..missed redo..
anyway to restore the db back..
I had failed to backup redo log file..
db was shut...properly
any info highly appreciated.
cheers
Edited by: zycoz100 on Feb 27, 2013 4:42 AM

A controlfile create is a fairly trivial task, for either a cold backup or hot backup scenario. Well, its an easy task after you've done the process a few times.
If you have a healthy oracle instance running any place else, preferably at 11gR2, or even a 10g instance can work as an example, get a system connection and do an `alter database backup controlfile to trace;` and the instance will create a new trace file with all SQL commands needed to rebuild the controlfile in the instance trace directory.
Have a look at the trace file, a `show parameter diag` reveals the diagnostic_dest parameter, look for the "trace" directory under that folder, for the latest *trc file. In 10g its `show parameter dump` and the trace file goes straight to the user_dump_dest directory, no digging required.

Quicktime Frames Play in iMovie but Not Exported File

Similar Messages

Maybe you are looking for