Quicktime won't work on my new iMac?

Hi all,
I've just got myself a new iMac, did a migration of all the stuff of my old Powerbook G4 and now Quicktime won't work!!
I had a Pro version of QT 7 but now it states I just have the free version! I did a software update and it told me to update QT, I tried but software update kept telling me that it cannot save the QT update. So in my frustration I deleted QT and decided to download it directly off the Apple site....it downloaded and then stated it can't mount the disk image...what on earth is going on, can anyone help?
Thanks

You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

Similar Messages

Tascam US-122L won't work on my new iMac

Just bought a brand new iMac 3.06 GHz Intel Core 2 Duo with OSX10.6.2 and my Tascam US-122L audio interface won't work. It worked on my old PC (slowly!), and it works on my friend's iMac with OSX 10.5.8, but not on mine!
The Tascam control panel says "Device: none found", and the Garageband Audio input and output don't recognize the US-122L as being connected (they do on my friend's iMac with 10.5.8)
I've emailed Tascam - they're very quick to respond, but the suggestions of new drivers, uninstall and reinstall drivers, firmware etc have not made any difference.
Then I tried calling them - they told me it had nothing to do with 32 bit versus 64 bit, but that the new iMacs did not have enough power output from the USB ports to run the US-122L, and that I needed a powered USB hub. I've borrowed one to try, and guess what - still doesn't work!
Any suggestions would be welcome, since Tascam don't seem to be able to help.
Thanks.

I doubt that insufficient USB power is the problem (whether supplied from a powered hub or an iMac). The Tascam US-122L is a discontinued model, replaced by the "Mk II" version, but either should comply with the USB bus powered spec to draw less than 500 ma (2.5 watts) or it wouldn't work with any standard USB host & most (including iMacs) would display a warning about it drawing too much power.
I suspect this particular unit is somehow defective, in part because of the above & in part because of the "slowly" comment in the original post.

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

There is nothing to do, unless you buy a new computer.
Mac OS 10.5.8 or later is required.

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks.

I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!

You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement.

Quicktime won't work after lion upgrade

quicktime won't work after installing Lion

I am having the same problem. Anyone else have this problem and find a solution??

Ibought adobe photoshop cs5 exended will this work on my new iMac operating system mac osx.10.9.13a1

Hello i,m new with mac. I bought adobe photoshop cs5 exended will this work on my new iMac operating system mac osx.10.9.13a1900

Hi,
Photoshop cs5 should work on Mavericks mac OS X 10.9

My photoshop elements and Lightroom serial numbers won't work for my new mac. I bought these softwares via download on my windows laptop but returned that laptop because the quality was not great. I decided to buy a mac and now can't use my serial numbers

my photoshop elements and Lightroom serial numbers won't work for my new mac. I bought these softwares via download on my windows laptop but returned that laptop because the quality was not great. I decided to buy a mac and now can't use my serial numbers to download the software.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Stephylei you will want to download the Mac versions of the installation files. If you purchased the software from Adobe, and choose the download option at the time of purchase, then the download will be available under your account. You can find more details at Find a download link on Adobe.com.

Will FCP7 Studio Pro work on a new iMac Core i7 with OS 10.8.4?

We are still on FCP6. We never upgraded to 7, and we have just upgraded our iMacs.
FCP6 does not work with the new iMac and we would like to continue using the older version of of FCP.
Will FCP7 Studio Pro work on a new iMac Core i7 with OS 10.8.4?

You should refrain from repeating this suggestion about Rosetta (especially since you have no direct experience with it). Much has changed since the time of its discussion back in the introduction of Lion days.
The fact of the matter is that Rosetta has no valid function installed into Lion or Mt. Lion and users have reported serious system problems and crashes after further subsequent modifications and System updates.
There are two safe methods to install FCP6 (FCS2) into Lion or Mt. Lion:
Use Pacifist:
http://www.charlessoft.com/
Use Jeremy Johnstone's Terminal method:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

Used black ink from my HP Photosmart C6380 won't work in my new HP Photosmart 7525

The black ink from my HP Photosmart C6380 won't work in my new HP Photosmart 7525. The cartridge is a 564 for both printers. However, I get the message that the ink cartridge has been used previously even though it is a newer cartridge that I had used in my C6380. Why won't this work?

Hello LTron,
Welcome to the HP Support Forums!
I see you are looking to use a cartridge previously installed in a different printer, the Photosmart 7525 says it a used cartridge.
If you are trying to use this cartridge before using the setup cartridges that come with the 7525, it will not work. Once the printer is initialized with the setup cartridges you would be able to use other ones.
If you have already used the setup cartridges, this error should only be letting you know that it has been installed in a printer before. Hitting OK, next, etc should clear the error.
'Used or Counterfeit Cartridge Detected' or 'Counterfeit Cartridge Advisory' Message with A Genuine ....
I hope this information has helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

I have an Airport Express and the pass code I used some time ago for my IPad won't work for my new IPhone 5S?

If you are sure that you are entering the correct password, then this sounds like an iPhone issue, so your best bet will be to post in the iPhone Support Community so that the experts over there can help.
Using iPhone
The best that we can do here is suggest that you start with the iOS support document Troubleshooting Wi-Fi Networks and Connections.
Resetting the iPhone took care of an issue like this with my wife's iPhone.
http://support.apple.com/kb/TS1398

I am having trouble making TM work with my new iMac.

I'm having trouble making TM work with my new iMac. I have an external drive, Freeagent GoFlex Drive, that is recognized on the desktop and in the drive utility. Time machine just "spins it's wheels" and doesn't seem to transfer any information. I have run repair disk on both drives and repair permissions. Any ideas how I can make this thing work?

Did you format the HD first. It has to be formatted to Mac OS Extended (Journaled). If you're not sure how to do this please read:
http://www.cultofmac.com/92845/formatting-external-hard-drives-in-os-x-video-how -to/

Will AppleWorks work with my new iMac?

Hi,
I just purchased a new iMac / 24", 2.8 GHz, CD2, and I was just wondering if my old AppleWorks disc 6.2.9. will work with the new iMac. I am currently running 10.5.6.
Or should I use the new iWork instead?
Any information anyone could provide would be most helpful.
John

Hi John,
AppleWorks will run well on your new iMac.
Whether you should switch completely to iWork depends on what parts of AppleWorks you use.
iWork's biggest deficiency (as noted in Yvan's signature line) is the lack of a database application. If you use AppleWorks's database module, there is nothing in iWork that will replaces it (although iWork '09 does have some list management and merge capabilities). You may also find some difficulty transfering Paint and Draw documents.
Other than that, the change should be pretty easy. iWork applications will open AppleWorks 6 Word Processing (Pages), Spreadsheet (Numbers) and Presentation (Keynote) documents. They will not open AW Draw, Paint or Database documents. Nor will they open any AW documents made with AW 5 or any version of ClarisWorks.
Best route:
-Install AW 6.2.9 on the iMac using the installer disk or by moving the whole AppleWorks 6 folder from one machine to the other. Remember to remove AW from the old machine to stay within the single user terms of your AW licence.
-Download and install the 30 day trial of iWork '09.
-Spend some time over the next 30 days getting familiar with the iWork applications, then make your decision.
Regards,
Barry

Thinking of purchasing an Apple Time Capsule to work with my new iMac. I only want it for general family use. Any comments?

Thinking of purchasing an Apple Time Capsule to work with my new iMac. I only want it for general family use. Any comments?

It should work just fine. You can see user reviews on Apple's web site, here is the URL:
http://store.apple.com/us/product/MD032LL/A/Time-Capsule-2TB?fnode=MTY1NDA0Mg

Will the Google Docs app in the iTunes store work with my new iMac? Description states it works with the iPod, iPhone and iPad.

Will the Google Docs app in the iTunes store work with my new iMac? Description states it works with the iPod, iPhone and iPad.

There's iOS apps for iOS which is what iPods, iPads, and iPhones use. Then there are Mac Apps (which is a different store) which is what run on a computer with OSX.

Quicktime won't work on my new iMac?

Similar Messages

Maybe you are looking for