Quiz slide not advance when using question pools and advance answer options?

Hi,
I am using CP 5.5. I created a small test where I have just 2 question in a question pool.  The questions are using the advanced answer options to show some specific feedback. When I insert the questions in to the project using a random question slide, after the user answers where you should be able to press Y or click to move on, I click, but nothing happens.  You can't get off the quiz slide.  The quiz slides work fine when they are inserted in the project as reqular quiz slides, but not when they are being pulled from a question pool.
Is this a known bug? Is there a workaround? Anyone else run in to this?
Thanks!
  Lori

I was having the same problem on the last Random Question slide (total 10 RQ slides), and was able to fix it by following the next steps:
Make sure Quiz: Pass or Fail actions are set to Continue for both Passing and Failing actions in the quiz preferences.
Delete the RQ slide not advancing, then duplicate one of the RQ slides working, and assign your question pool to the new slide if different from the original duplicate. This step will make sure you are using a good working RQ slide.
For some reason, my last RQ slide was corrupted and wasn't advancing to the Score slide at the end of the quiz.
I can finally finish this project.
Good luck.

Similar Messages

  • Poor Performance when using Question Pooling

    I'm wondering if anyone else out there is experiencing
    Captivate running very slow when using question pooling. We have
    about 195 questions with some using screenshots in jpeg format.
    By viewing the Windows Task Manager, CP is using anywhere
    between 130 to 160 K worth of memory. What is going on here? It's
    hammering the system pretty hard. It takes a large effort just to
    reposition the screenshot or even move a distractor.
    I'm running this on a 3.20GHz machine with 3GB of RAM.
    Any Captivate Gurus out there care to tackle this one?
    Help.

    MtnBiker1966,
    I have noticed the same problem. I only have 60 slides with
    43 questions and the Question Pool appears to be a big drain on
    performance. Changing the buttons from Continue to Go to next slide
    helped a little, but performance still drags compared to not using
    a question pool. I even tried reducing the number of question
    pools, but that did not affect the performance any. The search
    continues.
    Darin

  • NextSet, PrevSet not working when using Common Pool

    We are using our custom pool in our application, where username, password, URL are passed at runtime. All the JSPs use the same pool.
    We have a master-detail JSP done with data web beans and data tags. Master is done with data web beans and detail done with data tags.
    First, Last, Prev, Next buttons are working fine. NextSet and PrevSet buttons are not working. We are wondering what could be the reason.
    Can someone from JDEV team help us on this issue. We are going to production in 2 weeks. Any help is greatly appreciated.
    Thank you in advance.
    Virinchi

    Thank you for replying.
    In the datawebbean (Master) code we are getting the rowkey as follows:
    // if row exists , get the key
    if (l_row != null)
    sMasterRowKey = l_row.getKey().toStringFormat(true);
    In the data tag code (detail in our case), we are first finding the master row:
    !-- master datasource --
    jbo:DataSource id="DS_M" appid="IISmt_BC.IISmt_BCModule" viewobject="InformationSourcesView_CF_YES" rangesize="-1"
    jbo:RefreshDataSource datasource="DS_M"
    !-- find the rowkey of the master --
    jbo:Row id="RowM" datasource="DS_M" action="Find" rowkey="<%= sMasterRowKey %" /jbo:Row
    Please note that we are using same pool for both master (datawebbeans) and detail (datatags).
    For the detail, if I put rangesize as "10", its not finding the master rowkey.
    Let me know if you need more information.

  • Page tiles not showing when using Adobe Muse and Web marketing hosting

    Hello
    I have created a muse site that has the correct page titles showing in the browser when using the web basics hosting. But I need the same site to now contain a blog so have changed the hosting to web marketing, this has resulted in the pages not showing their page titles in the browser
    Does anybody know why this is or what I can do about it?
    thanks for any info
    regards
    Martin

    Page title should not change with site plan change unless it is done manually , or if modified file is uploaded from Muse.
    Please check the titles added on page if they exist or not, if still same issue , provide the site url.
    Thanks,
    Sanjit

  • PS CS6: Images sometimes not saved when using Close All and instructed to save

    I thought I had made a crazy mistake when this happened earlier today, but it just did it again and I was paying close attention. 
    I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes.   This saves lots of time when adjusting several multi-hundred MB images.  Imagine my surprise today when it closed an image without saving!  I had to repeat about 30 minutes of work as a result. 
    I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work.  It worked fine until a moment ago when it did it again.
    Has anyone seen something like this?  I can't find anything in searching.  In all my time using this feature in PS I never once had a problem before.

    Thanks for the reply.
    I just upgraded to CS6 from CS5 a few days ago, and this is my first week in heavy usage. 
    I do have Save in Background turned on.  I am saving locally.  I also have auto recovery saves turned on, at 5 minute intervals (CS6 has crashed a few times on me)
    Yesterday I used Close All with Save maybe 10 times, and it exhibited this behavior 2 of those times. 
    In the two cases, I had 3 PSDs open, each a little over 400 mb in size.  It seemed to save two of the images, but left one unsaved.  I noticed that instead of spending several seconds saving, it would quickly just close that image - as though it believed no changes had been made.  The changes that had been made to the image were routine - add some adjustment layers, some masks etc.
    I have tried to reproduce it by opening the same images, making similar changes and then repeating Close All with Save, but so far no (bad) luck.  Idle speculation - could it have something to do with the frequent interval of autorecovery saves that I do? Some kind of conflict?  Or is it something to do with background saves?  Definitely never saw this in previous versions of PS.
    As a workaround, I have made a simple action that saves an image and apply it in batch.  I just can't risk losing work.

  • Random question slide not shown when FP 8 or FP 9 output

    Hi everyone
    I've just begun to use Captivate a month ago, so it is not
    that much experience I can contribute with by now.
    One thing I have recognized is that I get some problems with
    random questions slides made from different question pools when
    using Flash Player 8 or 9 in the output otions.
    When using Flash Player 7 everything works as supposed: one
    random question is shown for every random question slide using one
    distinct question pool for each random question slide.
    When using one of the two others some of my random question
    slides are not shown. There are slides that are played - meaning
    that the player shows an empty slide for the time of 3 seconds -
    but the content is not shown. This happens only for some of the
    random question slides, and those are the same question slides each
    time, I publish - but when working or dragging around with the
    random question slides and publish again, the problem would come
    with some other random question slides, not positioned the same
    place as before, but showing the same problem in each published
    version.
    As written before each question pool is only used once. The
    different question slides used in the question pools are all
    duplicates, naturally with adjusted content.
    Does anyone has experienced something like that before? Could
    there be any other trouble with the content when using Flash Player
    7 in the output options, like quiz not playing in newly updated
    Flash Players ore something like that? Anything?
    I appreciate your suggestions or comments! Thanks in advance
    and kind regards,
    Lars

    Some more info - and a working solution...
    I have worked on this topic a bit more - and found out, that
    I have a problem with output option set to Flash Player 7, too.
    When I delete every other navigation option than the "next
    question" (what is it called in english?) button, I get this
    problem:
    The quiz now "freezes" randomly, not every time, but again
    and again. The quiz has both random slides from question pools and
    simple question slides.
    I have found out, that putting the simple question slides
    into question pools and then showing a random slide from those
    question pools fixes the problem.
    Has anyone experienced problems like that? Other solutions?
    Kind regards
    Lars
    Maybe someone has a similar problem.

  • Module borders not displaying when using Aggregator

    I am using Captivate 4.  I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
    The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
    Thank you.

    Lenny,
    I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
    Thanks in advance,
    Vince

  • U/tube videos open when using Safari but will not open when using Firefox.

    u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

    Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
    Try the following:
    Repair permissions & restart.
    Make sure you have the latest versions of Adobe Flash Player Software
    QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
    Deactivate the "Flash Media" option.

  • I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

    I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
    Thank you in advance
    arl

    Hi Keith, sorry for my late reply.
    Surely I am able to connect to the help function when Icontact the website
    of AdobeLR5.The problem is as follows,
    When I open LR5 on my computer and work with it and try to open the help
    function in the software, I don't get it.
    When I bought the CD I was naiv enough to believe that I get an independent
    working software. I learned in the meantime, that the seller does not allow
    to work with, without being connected to them.
    I don't believe that I am paranoid, but I like to buy something and use it
    without to inform the supplier that I do it. Otherwise I could have bought
    the license fpr LR5 via internet.
    Best regards
    Karl
    2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
        I bought a cd with Lightroom 5. After installation and registration I
    am not able to use 'help' function and I cannot update the software. I
    anyone able to give me a hint how to handle it? Thank you ind advance Karl
    kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
    marked Keith_Reeder
    <https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
    reply on I bought a cd with Lightroom 5. After installation and
    registration I am not able to use 'help' function and I cannot update the
    software. I anyone able to give me a hint how to handle it? Thank you ind
    advance Karl
    <https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

  • Strange behaviour when using connection pooling with proxy authentication

    All
    I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
    I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
    * User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
    * User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
    Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
    Regards,
    Chris

    Hi Chris,
    I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
    Cheers
    Greg

  • Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

    Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
    Thanks!
    PS. my keyboard language is not set to French.
    == This happened ==
    Every time Firefox opened
    == I tried to type a "?" in a work email using remote access.

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    May not be related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

    If you want to get a little more "exotic" you can try remapping the function keys.  I did a little google searching and the hits that looked promising are,
    Mapping volume and eject keys to 3rd-party keyboard Other Hardware
    Spark
    Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
    You can also export and import your Hot Keys library, or save it in HTML format to print it.
    Spark is free, so use it without moderation!

  • How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

    How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
    Is this possible?

    You can set any song to Skip when shuffling.
    In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

  • Images on Facebook do not appear when using different web browsers

    Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result).  This makes me think it's a setting within OS Mavericks that I'm missing.  I have not seen this issue on any other computers.  This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls.  and yes, i have images enabled in Safari.
    In safari the images don't appear, and in their place is a small blue "?" square >>.
    In Chrome it appears as a broken image link >>
    Has anyone encountered this?  Is there a fix?  It is very annoying.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

Maybe you are looking for