R/3 4.6c SR2 on win2003

Hi Masters,
I am struggling with an installation of the above. We are doing a migration of 4.6c Oracle from Solaris to Windows to upgrade it in the next step.
As soon as I start the CI instance installation I run into the following error:
Error: R3PISSERVICEMANAGER_NT_IND Substitute Variables
     could not load the SAP MMC Snapin DLL
     Did you install the SAP MMC Snapin using the program R3DLLINS.EXE
     from the Kernel CD?
Error: R3PISSERVICEMANAGER_NT_IND ColdKeyCheck
     Phase failed.
Error: Main {}
     Installation aborted
I followed notes 976457 and 980981 and downloaded INSORA102_0.SAR and DBATL700O10*.SAR as described, ran the R3 DLLINS.EXE, copied the installation discs to the local c: drive instead of NFS, copied the DLL´s manually, rebooted, used the 4.6D EXT kernel,... can´t remember what else i did... a lot. Does anyone have an idea what could be the issue? Usually I work on UNIX this is my first Windows experience...
Cheers Andre

Hi Andre,
> I am struggling with an installation of the above. We are doing a migration of 4.6c Oracle from Solaris to Windows to upgrade it in the next step.
You're aware that for that kind of migration you must have a certified migration consultant on-site to not loose support for the problems in and after the migration - and for the target system?
http://service.sap.com/osdbmigration
--> FAQ
> As soon as I start the CI instance installation I run into the following error:
>
> Error: R3PISSERVICEMANAGER_NT_IND Substitute Variables
>      could not load the SAP MMC Snapin DLL
>      Did you install the SAP MMC Snapin using the program R3DLLINS.EXE
>      from the Kernel CD?
> Error: R3PISSERVICEMANAGER_NT_IND ColdKeyCheck
>      Phase failed.
> Error: Main {}
>      Installation aborted
you have an MMC shortcut on the desktop of the machine?
Markus

Similar Messages

  • Requirements for Running SGEN

    Hi,
    I installed IDES ECC6.0 SR2      OS win2003
         Free Space
    C:  1.44 GB          OS
    D:  35 GB
    E:: 1.06 GB           SAP INSTALLED on E Drive
    Can i run SGEN in this scenario,becaues where SAP installed i Have only 1 GB free Space,but overall i have 37 GB free Space.It should be mandatory,where SAP installed Drive should be free space are in any other drives also no problem

    Hi Reddy,
                    you need a minimum 2 GB disk space. And please let me know in which drive you installed database.
    Regards,
    Ramarao.a

  • Strbds.cmd showing red !!

    I've just installed the IDES 4.7 SR2 on win2003 server and Oracle 10g as the DB. When I went on to start the instance, it showed strdbs.cmd in the SAP MMC.
    SAPSID and DBSID : I47
    Could you please help, what is the reason for this and how it can be resolved !!
    Thank you,
    Sanjeev K.

    Hi
    this is because there is no strdbs.cmd in the exe folder incase not there copy it from any other running system
    this is a script which starts database
    in case still the problem persist
    edit the start profile by adding an # before _DB = strdbs.cmd
    best regards
    George

  • SGEN not working

    Dear All,
    My Environment ECC6.0 SR2
    OS       : win2003
    DB       : Oracle.
    Installation completed successful but when i am doing Post installation activity SGEN.
    Its not refreshing and background job was runnig fine.Its running from long time.
    Thanks&Regards

    For how much time it has been running?
    If it is still in process, paste job logs here.....
    if it has been running for a long time we can assume that job to be hung. Then you may need to kill and re-run.
    If it is test/Dev environment or a training system....there is no need to run SGEN, automatically will execute at the time of first access.
    Regards
    Nick Loy

  • Help for install NW04s SR2 + win2003 server 64bit

    I use following S/W and H/W condition to install a NW04s SR2 (ABAP + Java) central system.
    S/W: Win 2003 standard x64 edition, SP2. SQL 2005,
    H/W: CPU:Intel Xeon*1, RAM: 4GB, virtual memory: 20GB.
    JDK: 1.4.2.14, 64-bit version.
    But, install procedure fail on 'Start java engine', error message is
    ERROR 2007-06-23 19:01:43
    CJS-30150  Java processes of instance PD1/DVEBMGS03 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
    ERROR 2007-06-23 19:01:43
    FCO-00011  The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR .
    I found no process exist on 'J2EE Process Table' tab in the sapmmc, but ABAP instance running perfectly.
    Therefore, I follow notes 723909 to modify server's JVM parameter through J2EE configtool.
    -Xmx2048m
    -Xms2048m
    -XX:NewSize=320m
    -XX:MaxNewSize=320m
    -XX:MaxPermSize=256m
    -XX:PermSize=256m
    Any suggestion would very appreciate.

    I use Oracle DB, but I have the same problem.
    The Server do not start.
    I can see this error in file dev_bootstrap:
    [Thr 2420] JLaunchIStartFunc: Thread 2420 started as Java VM thread.
    [Thr 2420] *** ERROR => DlLoadLib: LoadLibrary(jvm.dll) Error 193 [dlnt.c       237]
    [Thr 2420] *** ERROR => Can't load VM shared library (jvm.dll) (rc=-2) [jhvmxx.c     1576]
    [Thr 2420] **********************************************************************
    ERROR => Cannot load the Java VM shared library.
    Please see SAP Note 943602 , section 'Java VM shared library issues'
    for additional information and trouble shooting.
    [Thr 2420] *** ERROR => Cannot load DLL for Java VM [jlnchxxi.c   717]
    [Thr 4944] Fri Feb 08 07:52:12 2008
    [Thr 4944] JLaunchCloseProgram: good bye (exitcode = -2)
    Note 943602 or 940893 do not help me.
    Any suggestion?
    thanks.
    Giorgio Peressin

  • SOLMAN 4.0 SR2 connect to SAP R/3 Three System landscape (DEV QA and PRD)

    Hi,
    We have successfully installed SOLMAN 4.0 SR2 (ABAP + JAVA) on
    WIN2003 SP2 EE MSSQL 2005 EE SP1.
    I just want to activate the service so that SOLMAN could see my existing SAP R/3 4.6 C Three system landscape (DEV QAS PRD).
    I heard settings should be done on SPRO IMG configs. Could anyone tell me the exact procedure to navigate on it. I see a lot of buttons to config and execute, Just want to make sure everything will be in order.
    My SLD is directly installed locally on my SOLMAN server.
    Thanks,
    Simoun

    Hello Simoun,
    Telling from your last sentence I assume that you would like to connect SolMan (transaction SMSY) to your locally installed SLD or in other words: replicate SLD system data into SOLMAN system landscape SMSY.
    Please check this document:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000530282007E
    Here you find information covering prerequisites, required SAP Solution Manager IMG configuration to connect SLD and SMSY and frequently ask questions (FAQ-like).
    I hope this helps you to get started.
    Regards,
    Doreen

  • Developer Workplace SR2 sapinst problem

    Win2003 server + MS SQL, trying to perform a NW04s Developer Workplace SR2 install.
    Running sapinst, immediately after choosing the Developer Workplace - SQL option, I get error:
    103 syslib.filesystem.errorSettingTimeStamp C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/toplevel.xml, 816
    No logs are even created yet in the sapinst directory.  Only 5 XML files, which is where this stopped.  I have full admin rights on the host.  I've not seen that "timestamp" error before.  Anyone?

    Hi David,
    some strange problems are often related to the java version installed on the server you're installing. Make sure you have java version 1.4.2 and not 1.5 (it doesn't work with 1.5 yet) - maybe that's the problem.
    Regards,
    Cornelia

  • Error in installing Solman 4.0 SR2

    Hi,
    An Error occured during the installation of Solman 4.0 SR2 in import ABAP phase.
    Sofware and Hardware configurartion:
    Java 1.4.2_12
    Database MSSQL 2005 SP2
    Solution manager 4.0 SR2
    Dual core 2.6 GHZ
    2 gb ram
    160gb hard drive
    Plz find attached the sapinst.log file and import_monitor.log file.
    Needfull help in this regard would be highly appreciated. Deserving points will be rewarded.
    Best Regards
    Omeir.
    *import_monior.log*
    INFO: 2007-09-21 01:21:36
    Import Monitor is started.
    CONFIG: 2007-09-21 01:21:36
    Application options:
    dbCodepage=4103
    dbType=MSS
    extFiles=no
    importDirs=E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4
    installDir=C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS
    jobNum=3
    loadArgs= -loadprocedure fast
    monitorTimeout=30
    orderBy=
    r3loadExe=C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2007-09-21 01:21:36
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2007-09-21 01:21:36
    List of packages with views: 'SAPVIEW'.
    TRACE: 2007-09-21 01:21:36 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is started.
    INFO: 2007-09-21 01:21:36 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2007-09-21 01:21:36
    Data codepage 1100 is determined using TOC file 'E:\Export\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
    INFO: 2007-09-21 01:21:37
    Version table 'SVERS' is found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    INFO: 2007-09-21 01:21:37
    Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    TRACE: 2007-09-21 01:21:37 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSDIC' import package is started.
    TRACE: 2007-09-21 01:21:37 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSDIC' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP2\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDIC.TSK MSS -l SAPSDIC.log
    TRACE: 2007-09-21 01:21:37 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSDIC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast
    INFO: 2007-09-21 01:25:22 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSDIC' import package is successfully completed.
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is started.
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSSEXC' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP1\DATA\SAPSSEXC.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSSEXC.TSK MSS -l SAPSSEXC.log
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is started.
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPAPPL0' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPAPPL0.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL0.TSK MSS -l SAPAPPL0.log
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL1' import package is started.
    TRACE: 2007-09-21 01:25:36 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPAPPL1' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP4\DATA\SAPAPPL1.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL1.TSK MSS -l SAPAPPL1.log
    TRACE: 2007-09-21 01:25:37 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast
    TRACE: 2007-09-21 01:25:37 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL1' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
    TRACE: 2007-09-21 01:25:38 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL0' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast
    INFO: 2007-09-21 13:22:54
    Import Monitor is started.
    CONFIG: 2007-09-21 13:22:54
    Application options:
    dbCodepage=4103
    dbType=MSS
    extFiles=no
    importDirs=E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4
    installDir=C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS
    jobNum=3
    loadArgs= -loadprocedure fast
    monitorTimeout=30
    orderBy=
    r3loadExe=C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2007-09-21 13:22:54
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2007-09-21 13:22:54
    List of packages with views: 'SAPVIEW'.
    TRACE: 2007-09-21 13:22:54 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is started.
    INFO: 2007-09-21 13:22:54 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2007-09-21 13:22:54
    Data codepage 1100 is determined using TOC file 'E:\Export\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
    INFO: 2007-09-21 13:22:58
    Version table 'SVERS' is found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    INFO: 2007-09-21 13:22:58
    Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is started.
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL1' import package is started.
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is started.
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL1' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
    TRACE: 2007-09-21 13:23:08 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL0' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast
    ERROR: 2007-09-21 13:23:21 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPAPPL0.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: 2007-09-21 13:23:21 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL1' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPAPPL1.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: 2007-09-21 13:23:21 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPSSEXC.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL2' import package is started.
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSRC' import package is started.
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPAPPL2' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP2\DATA\SAPAPPL2.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL2.TSK MSS -l SAPAPPL2.log
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPPOOL' import package is started.
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSSRC' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP4\DATA\SAPSSRC.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSSRC.TSK MSS -l SAPSSRC.log
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPPOOL' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP2\DATA\SAPPOOL.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPPOOL.TSK MSS -l SAPPOOL.log
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPPOOL' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -loadprocedure fast
    TRACE: 2007-09-21 13:23:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSRC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -loadprocedure fast
    TRACE: 2007-09-21 13:23:25 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL2' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -loadprocedure fast
    INFO: 2007-09-21 13:24:19 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPPOOL' import package is successfully completed.
    TRACE: 2007-09-21 13:24:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSPROT' import package is started.
    TRACE: 2007-09-21 13:24:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSPROT' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPSPROT.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSPROT.TSK MSS -l SAPSPROT.log
    TRACE: 2007-09-21 13:24:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSPROT' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -loadprocedure fast
    INFO: 2007-09-21 13:25:38 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSPROT' import package is successfully completed.
    TRACE: 2007-09-21 13:25:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSDOCU' import package is started.
    TRACE: 2007-09-21 13:25:54 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSDOCU' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP2\DATA\SAPSDOCU.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDOCU.TSK MSS -l SAPSDOCU.log
    TRACE: 2007-09-21 13:25:54 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSDOCU' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -loadprocedure fast
    INFO: 2007-09-21 13:26:05 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSDOCU' import package is successfully completed.
    TRACE: 2007-09-21 13:26:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSLEXC' import package is started.
    TRACE: 2007-09-21 13:26:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSLEXC' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPSLEXC.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSLEXC.TSK MSS -l SAPSLEXC.log
    TRACE: 2007-09-21 13:26:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSLEXC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -loadprocedure fast
    INFO: 2007-09-21 13:26:30 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSLEXC' import package is successfully completed.
    TRACE: 2007-09-21 13:26:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPCLUST' import package is started.
    TRACE: 2007-09-21 13:26:54 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPCLUST' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPCLUST.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPCLUST.TSK MSS -l SAPCLUST.log
    TRACE: 2007-09-21 13:26:56 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPCLUST' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -loadprocedure fast
    INFO: 2007-09-21 13:27:12 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPCLUST' import package is successfully completed.
    TRACE: 2007-09-21 13:27:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSLOAD' import package is started.
    TRACE: 2007-09-21 13:27:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSLOAD' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPSLOAD.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSLOAD.TSK MSS -l SAPSLOAD.log
    TRACE: 2007-09-21 13:27:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSLOAD' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -loadprocedure fast
    INFO: 2007-09-21 13:27:28 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSLOAD' import package is successfully completed.
    INFO: 2007-09-21 13:27:40 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSRC' import package is successfully completed.
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDFACT' import package is started.
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDDIM' import package is started.
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPDDIM' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPDDIM.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDDIM.TSK MSS -l SAPDDIM.log
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPDFACT' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPDFACT.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDFACT.TSK MSS -l SAPDFACT.log
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPDDIM' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -loadprocedure fast
    TRACE: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPDFACT' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -loadprocedure fast
    INFO: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDDIM' import package is successfully completed.
    INFO: 2007-09-21 13:27:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDFACT' import package is successfully completed.
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPUSER' import package is started.
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDODS' import package is started.
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPUSER' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPUSER.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPUSER.TSK MSS -l SAPUSER.log
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPDODS' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP3\DATA\SAPDODS.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDODS.TSK MSS -l SAPDODS.log
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPDODS' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -loadprocedure fast
    TRACE: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPUSER' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -loadprocedure fast
    INFO: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPUSER' import package is successfully completed.
    INFO: 2007-09-21 13:28:24 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPDODS' import package is successfully completed.
    TRACE: 2007-09-21 13:28:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is started.
    TRACE: 2007-09-21 13:28:54 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAP0000' import package:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\Export\EXP4\DATA\SAP0000.STR "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAP0000.TSK MSS -l SAP0000.log -o D
    TRACE: 2007-09-21 13:28:54 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAP0000' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -loadprocedure fast
    INFO: 2007-09-21 13:28:54 com.sap.inst.migmon.LoadTask run
    Loading of 'SAP0000' import package is successfully completed.
    INFO: 2007-09-21 13:34:56 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL2' import package is successfully completed.
    WARNING: 2007-09-21 13:35:24
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2007-09-21 13:35:24
    3 error(s) during processing of packages.
    INFO: 2007-09-21 13:35:24
    Import Monitor is stopped.
    INFO: 2007-09-21 13:38:06
    Import Monitor is started.
    CONFIG: 2007-09-21 13:38:06
    Application options:
    dbCodepage=4103
    dbType=MSS
    extFiles=no
    importDirs=E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4
    installDir=C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS
    jobNum=3
    loadArgs= -loadprocedure fast
    monitorTimeout=30
    orderBy=
    r3loadExe=C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2007-09-21 13:38:06
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2007-09-21 13:38:06
    List of packages with views: 'SAPVIEW'.
    TRACE: 2007-09-21 13:38:06 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is started.
    INFO: 2007-09-21 13:38:06 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2007-09-21 13:38:06
    Data codepage 1100 is determined using TOC file 'E:\Export\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
    INFO: 2007-09-21 13:38:06
    Version table 'SVERS' is found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    INFO: 2007-09-21 13:38:06
    Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\Export\EXP2\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is started.
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL1' import package is started.
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is started.
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL1' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
    TRACE: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL0' import package into database:
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast
    ERROR: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPSSEXC.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: 2007-09-21 13:38:07 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL1' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPAPPL1.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: 2007-09-21 13:38:08 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL0' import package is interrupted with R3load error.
    Process 'C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast' exited with return code 2.
    For mode details see 'SAPAPPL0.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2007-09-21 13:38:36
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2007-09-21 13:38:36
    3 error(s) during processing of packages.
    INFO: 2007-09-21 13:38:36
    Import Monitor is stopped.
    sapinst.log
    INFO 2007-09-21 13:22:26
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.2.xml'.
    INFO 2007-09-21 13:22:27
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.3.xml'.
    INFO 2007-09-21 13:22:29
    Execute step
    Component  W2K_ServicePack_Check|ind|ind|ind|ind
    Preprocess  of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
    INFO 2007-09-21 13:22:40
    Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.2.xml'.
    INFO 2007-09-21 13:22:41
    Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
    INFO 2007-09-21 13:22:51
    Switched to user: prdadm.
    INFO 2007-09-21 13:22:51
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.
    INFO 2007-09-21 13:22:51
    Switched to user: prdadm.
    INFO 2007-09-21 13:22:51
    Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS.
    INFO 2007-09-21 13:22:51
    Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4 -installDir "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst is written to the logfile import_monitor.java.log.
    WARNING 2007-09-21 13:35:24
    Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4 -installDir "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code 103. Output:
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 16, completed 1, failed 0, total 18.
    Import Monitor jobs: running 2, waiting 15, completed 1, failed 0, total 18.
    Import Monitor jobs: running 3, waiting 14, completed 1, failed 0, total 18.
    Loading of 'SAPAPPL0' import package: ERROR
    Loading of 'SAPAPPL1' import package: ERROR
    Import Monitor jobs: running 1, waiting 14, completed 1, failed 2, total 18.
    Import Monitor jobs: running 0, waiting 14, completed 1, failed 3, total 18.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 0, waiting 14, completed 1, failed 3, total 18.
    Import Monitor jobs: running 1, waiting 13, completed 1, failed 3, total 18.
    Import Monitor jobs: running 2, waiting 12, completed 1, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 11, completed 1, failed 3, total 18.
    Loading of 'SAPPOOL' import package: OK
    Import Monitor jobs: running 2, waiting 11, completed 2, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 10, completed 2, failed 3, total 18.
    Loading of 'SAPSPROT' import package: OK
    Import Monitor jobs: running 2, waiting 10, completed 3, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 9, completed 3, failed 3, total 18.
    Loading of 'SAPSDOCU' import package: OK
    Import Monitor jobs: running 2, waiting 9, completed 4, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 8, completed 4, failed 3, total 18.
    Loading of 'SAPSLEXC' import package: OK
    Import Monitor jobs: running 2, waiting 8, completed 5, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 7, completed 5, failed 3, total 18.
    Loading of 'SAPCLUST' import package: OK
    Import Monitor jobs: running 2, waiting 7, completed 6, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 6, completed 6, failed 3, total 18.
    Loading of 'SAPSLOAD' import package: OK
    Import Monitor jobs: running 2, waiting 6, completed 7, failed 3, total 18.
    Loading of 'SAPSSRC' import package: OK
    Import Monitor jobs: running 1, waiting 6, completed 8, failed 3, total 18.
    Import Monitor jobs: running 2, waiting 5, completed 8, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 4, completed 8, failed 3, total 18.
    Loading of 'SAPDDIM' import package: OK
    Import Monitor jobs: running 2, waiting 4, completed 9, failed 3, total 18.
    Loading of 'SAPDFACT' import package: OK
    Import Monitor jobs: running 1, waiting 4, completed 10, failed 3, total 18.
    Import Monitor jobs: running 2, waiting 3, completed 10, failed 3, total 18.
    Import Monitor jobs: running 3, waiting 2, completed 10, failed 3, total 18.
    Loading of 'SAPUSER' import package: OK
    Import Monitor jobs: running 2, waiting 2, completed 11, failed 3, total 18.
    Loading of 'SAPDODS' import package: OK
    Import Monitor jobs: running 1, waiting 2, completed 12, failed 3, total 18.
    Import Monitor jobs: running 2, waiting 1, completed 12, failed 3, total 18.
    Loading of 'SAP0000' import package: OK
    Import Monitor jobs: running 1, waiting 1, completed 13, failed 3, total 18.
    Loading of 'SAPAPPL2' import package: OK
    Import Monitor jobs: running 0, waiting 1, completed 14, failed 3, total 18.
    ERROR 2007-09-21 13:35:24
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    ERROR 2007-09-21 13:35:24
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    INFO 2007-09-21 13:38:06
    An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
    INFO 2007-09-21 13:38:06
    Switched to user: prdadm.
    INFO 2007-09-21 13:38:06
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.
    INFO 2007-09-21 13:38:06
    Switched to user: prdadm.
    INFO 2007-09-21 13:38:06
    Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS.
    INFO 2007-09-21 13:38:06
    Output of C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4 -installDir "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst is written to the logfile import_monitor.java.log.
    WARNING 2007-09-21 13:38:36
    Execution of the command "C:\j2sdk1.4.2_12\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\Export\EXP1;E:\Export\EXP2;E:\Export\EXP3;E:\Export\EXP4 -installDir "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS" -orderBy "" -r3loadExe C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code 103. Output:
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 3, completed 14, failed 0, total 18.
    Import Monitor jobs: running 2, waiting 2, completed 14, failed 0, total 18.
    Import Monitor jobs: running 3, waiting 1, completed 14, failed 0, total 18.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 2, waiting 1, completed 14, failed 1, total 18.
    Loading of 'SAPAPPL1' import package: ERROR
    Import Monitor jobs: running 1, waiting 1, completed 14, failed 2, total 18.
    Loading of 'SAPAPPL0' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 14, failed 3, total 18.
    ERROR 2007-09-21 13:38:36
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    ERROR 2007-09-21 13:38:36
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    INFO 2007-09-21 13:38:40
    An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
    Edited by: mohammed  omeir on Dec 31, 2007 2:30 PM

    Hi Markus,
    Its says a previous run may not have finished clearly.
    What i need to do now?
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070921132313
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Sep  1 2006 00:38:35
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
    Hi Markus,
    Its says a previous
    (DB) INFO: connected to DB
    (TSK) ERROR: file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\SAPAPPL1.TSK.bck already seems to exist
                 a previous run may not have been finished cleanly
                 file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\SAPAPPL1.TSK possibly corrupted
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070921132321
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070921133807
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
    Compiled Sep  1 2006 00:38:35
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
    (DB) INFO: connected to DB
    (TSK) ERROR: file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\SAPAPPL1.TSK.bck already seems to exist
                 a previous run may not have been finished cleanly
                 file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\SAPAPPL1.TSK possibly corrupted
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    C:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070921133807

  • Need a Help with instalation SAP IDES 2005 SR2

    Hi All,
    I'm trying to install SAP IDES 2005 SR2 on my notebook HP (2GB RAM, 120GB HDD, 700 HDD external, dual core procesor), Win Server 2003 Enterpise, Oracle 10g (patch 2), jave 1.4.2.13, I've downloaded all installation files DVDs from SAP Marketplace.
    Everytime my installations stops on step 19 - Import ABAP, and I get message like this:
    (DB) INFO: T76MGE_CGROUP~0 created #20081023222635
    DbSl Trace: Error 604 in exec_immediate() from oci_execute_stmt(), orpc=0
    DbSl Trace: ORA-604 occurred when executing SQL stmt (parse error offset=0)
    (DB) ERROR: DDL statement failed
    (CREATE TABLE "T76MGE_CKI" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "CHKL_ITEM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "TASK_FOR" VARCHAR2(12) DEFAULT ' ' NOT NULL , "START_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "POSS_DUR" VARCHAR2(12) DEFAULT '0000' NOT NULL , "PSDUR_T_UNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "NEC_IT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "IS_DOC" VARCHAR2(3) DEFAULT ' ' NOT NULL , "START_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "START_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL , "END_DATE" VARCHAR2(6) DEFAULT ' ' NOT NULL , "END_DIFF" NUMBER(4,0) DEFAULT 0 NOT NULL , "END_TUNIT" VARCHAR2(9) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
    (SQL error 604)
    error message returned by DbSl:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
    (DB) INFO: disconnected from DB
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20081023222635
    and also:
    TRACE: 2008-10-23 22:22:48 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPAPPL2' import package into database:
    G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
    ERROR: 2008-10-23 22:26:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPAPPL2' import package is interrupted with R3load error.
    Process 'G:\usr\sap\IDE\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
    For mode details see 'SAPAPPL2.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2008-10-23 22:26:48
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2008-10-23 22:26:48
    1 error(s) during processing of packages.
    INFO: 2008-10-23 22:26:48
    Import Monitor is stopped.
    Could anyone help me with this issue, what I am doing wrong?
    I'll appreciete any help, cause I'm going crazy  this is may be the 5th time that my installation stops on this stage.
    Thanks in advance

    Hi Eric
    These are values in init.ora:
    #Transaction processing
    #sort_area_size=524288                  
    #Datawarehouse
    sort_area_size=1048576                  
    large_pool_size=1048576                  #Transaction processing, Datawarehouse
    db_cache_size=50331648                   #Datawarehouse, Transaction processing
    java_pool_size=67108864                  #Datawarehouse, Transaction processing
    db_block_buffers =  200                 # INITIAL
    db_block_buffers=100                    #SMALL 
    db_block_buffers =550                   # MEDIUM
    db_block_buffers=3200                   #LARGE
    #shared_pool_size =  52428800             # INITIAL
    shared_pool_size = 67108864              # datewarehouse, transaction processing
    log_checkpoint_interval = 10000
    How I have to chenge the values?
    And in init<SID> values are:
    unit of shared_pool_size: bytes
    unit of db_block_buffers: number of cached blocks
    unit of log_buffer: bytes
    shared_pool_size = 160903987
    10% of shared_pool_size
    shared_pool_reserved_size = 16090398
    log_buffer = 1048576
    Please, let me know what are the correct values?
    Thank you in advance

  • Import ABAP error in ERP 2005 SR2 IDES installation

    Hi Experts
                   I am trying to install the SAP ERP 2005 SR2 ( OS is 2003 and Database is Oracle 10g )IDES which i downloaded from the SAP market place and got
    the following error at the IMPORT ABAP task
    INFO 2008-02-20 14:19:37
    Output of C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
    com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
    D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
    D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
    D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
    D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
    -orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
    -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
    WARNING 2008-02-20 14:31:07
    Execution of the command "C:\Program Files\Java\j2re1.4.2_16\bin\java.exe -classpath migmon.jar -showversion
    com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\ERP 2005 IDES\51032413_1\EXP1;
    D:\ERP 2005 IDES\51032413_2\EXP2;D:\ERP 2005 IDES\51032413_3\EXP3;D:\ERP 2005 IDES\51032413_4\EXP4;
    D:\ERP 2005 IDES\51032413_5\EXP5;D:\ERP 2005 IDES\51032413_6\EXP6;D:\ERP 2005 IDES\51032413_6\EXP7;
    D:\ERP 2005 IDES\51032413_6\EXP8;D:\ERP 2005 IDES\51032413_6\EXP9;D:\ERP 2005 IDES\51032413_6\EXP10;
    D:\ERP 2005 IDES\51032413_6\EXP11" -installDir C:\PROGRA1\SAPINS1\ERP\SYSTEM\ORA\CENTRAL\AS
    -orderBy "" -r3loadExe D:\usr\sap\SRD\SYS\exe\nuc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 1100
    -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103.
    Output: java version "1.4.2_16"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)Java HotSpot(TM)
    Client VM (build 1.4.2_16-b05, mixed mode)Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
    Loading of 'SAPSDIC' import package: ERRORImport Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
    ERROR 2008-02-20 14:31:07
    CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    ERROR 2008-02-20 14:31:07
    FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW
    CreateDBandLoad|ind|ind|ind|ind|10|0|NWABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor
    was executed with status ERROR .
    can anyone help me to fix this error. Installation of ECC 6.0 with SQL SERVER 2005 was done fine.
    Thanking you
    Regards
    Mrudul

    Hi Mrudul,
       Understood you have downloaded the completed IDES SAP 2005 SR2 package, i have also downloaded it several months ago, but i found the package not full good when i prepare to install it last week, 3 of 35 Exp unpackage CRC32 error(51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar) when unpackage them, can you do me a favor to share me the 3 rar files? As the original download address have been obsoleted away service.sap.com, i can tell you my FTP site to store them.
    51032413_part15.rar & 51032413_part16.rar & 51032413_part17.rar
    Or  51032413_3\EXP3\DATA\SAPAPPL1.009 & SAPAPPL1.010
    12/17/2006  02:32 AM     1,048,576,000 SAPAPPL1.009
    12/17/2006  02:42 AM       954,643,456 SAPAPPL1.010
    Tks!
    Best rds,
    Jeff
    msn: [email protected]

  • Error while installing NW 7.4 SR2 in High availability

    Hello Guys,
    We are installing NW 7.4 SR2 Enterprise Portal with sybase database on windows 2012 R2 server under high availability i.e Microsoft Cluster.
    JEP is the system ID of the server, SAPJEP is the virtual host and X.X.X.36 is the virtual I.P for Central Instance node.
    Physical I.P of First node is X.X.X.21
    We have started the installation as first cluster node and get stuck at phase 3.
    The error in sapinst.log is below:-
    FCO-00011 The step assignNetworknameToClusterGroup with step key
    |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup
    was executed with status ERROR ( Last error reported by the step: Could
    not set properties on ClusterResource 'SAP JEP IP'.).
    The error log of sapinst_dev.log is is below:-
    TRACE      2015-03-18 11:30:29.193
    NWInstance.getStartProfilePath(true)
    TRACE      2015-03-18 11:30:29.194
    NWInstance.getStartProfileName()
    TRACE      2015-03-18 11:30:29.194
    NWInstance.getStartProfileName() done: JEP_ERS10_SAPJEP
    TRACE      2015-03-18 11:30:29.194
    NWERSInstance.getDirProfile()
    TRACE      2015-03-18 11:30:29.194
    NW.getDirProfile(false)
    TRACE      2015-03-18 11:30:29.195
    NW.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
    TRACE      2015-03-18 11:30:29.204 [synxcpath.cpp:925]
              CSyPath::getOSNodeType(bool) lib=syslib module=syslib
    Path \\SAPJEP/sapmnt/JEP/SYS/profile is on a non-existing share.
    TRACE      2015-03-18 11:30:29.204
    NWERSInstance.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
    TRACE      2015-03-18 11:30:29.205
    NWInstance.getStartProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
    TRACE      2015-03-18 11:30:29.206
    NWInstance.getProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
    TRACE      2015-03-18 11:30:29.206
    NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
    TRACE      2015-03-18 11:30:29.207
    NW.getPersistentDefaultProfile()
    TRACE      2015-03-18 11:30:29.207
    NW.isUnicode(true)
    TRACE      2015-03-18 11:30:29.208
    NW.isUnicode() done: true
    TRACE      2015-03-18 11:30:29.208
    NW.getPersistentDefaultProfile() done
    TRACE      2015-03-18 11:30:29.208
    NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
    TRACE      2015-03-18 11:30:29.208
    NWProfiles(JEP.ERS10.SAPJEP)._getPersistentProfile(INSTANCE) done
    TRACE      2015-03-18 11:30:29.209
    NWProfiles(JEP.ERS10.SAPJEP).getPersistentProfile() done
    TRACE      2015-03-18 11:30:29.209
    PersistentR3Profile.commit()
    TRACE      2015-03-18 11:30:29.209
    PersistentR3Profile.commit() done
    TRACE      2015-03-18 11:30:29.209
    NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
    TRACE      2015-03-18 11:30:29.210
    NW.getPersistentDefaultProfile()
    TRACE      2015-03-18 11:30:29.210
    NW.isUnicode(true)
    TRACE      2015-03-18 11:30:29.211
    NW.isUnicode() done: true
    TRACE      2015-03-18 11:30:29.211
    NW.getPersistentDefaultProfile() done
    TRACE      2015-03-18 11:30:29.211
    NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
    TRACE      2015-03-18 11:30:29.211
    PersistentR3Profile.commit()
    TRACE      2015-03-18 11:30:29.211
    PersistentR3Profile.commit() done
    TRACE      2015-03-18 11:30:29.212
    NWProfiles(JEP.ERS10.SAPJEP).commit() done
    TRACE      2015-03-18 11:30:29.212
    NWInstanceInstall.addSAPCryptoParametersToProfile() done
    TRACE      2015-03-18 11:30:29.260
    The step setProfilesForSAPCrypto with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|NW_SAPCrypto|ind|ind|ind|ind|crypto|0 has been executed successfully.
    INFO      2015-03-18 11:30:29.262 [synxccuren.cpp:887]
              CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
              lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
    TRACE      2015-03-18 11:30:29.265 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:29.267 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:29.270 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:29.280 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:29.281 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:29.284 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:29.293 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:29.295 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:29.315 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    INFO      2015-03-18 11:30:29.330 [csistepexecute.cpp:1024]
    Execute step askUnpack of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0
    TRACE      2015-03-18 11:30:29.339 [csistepexecute.cpp:1079]
    Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|askUnpack returns TRUE
    TRACE      2015-03-18 11:30:29.364
      Call block: NW_Unpack2_ind_ind_ind_ind
        function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpack
    is validator: false
    TRACE      2015-03-18 11:30:29.364
    NWInstall.getSystem(JEP)
    TRACE      2015-03-18 11:30:29.366
    NWOption(localExeDir).value()
    TRACE      2015-03-18 11:30:29.366
    NWOption(localExeDir).value() done: true
    TRACE      2015-03-18 11:30:29.367
    NWOption(collected).value()
    TRACE      2015-03-18 11:30:29.367
    NWOption(collected).value() done: true
    TRACE      2015-03-18 11:30:29.369
    NWInstall({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:29.370
    NW({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:29.371
    NW() done
    TRACE      2015-03-18 11:30:29.371
    NWInstall() done
    TRACE      2015-03-18 11:30:29.371
    NWInstall.getSystem() done
    TRACE      2015-03-18 11:30:29.372
    NWInstall.mapUnpackTable(t_askUnpack)
    TRACE      2015-03-18 11:30:29.373
    NWInstall.mapUnpackTable() done: true
    TRACE      2015-03-18 11:30:29.377
    NWDB._get(JEP, ind)
    TRACE      2015-03-18 11:30:29.377
    NWDB._fromTable(JEP, ctor)
    TRACE      2015-03-18 11:30:29.379
    NWDB(JEP, {
      sid:JEP
      hostname:undefined
      dbsid:undefined
      installDB:false
      ORACLE_HOME:
      abapSchema:
      abapSchemaUpdate:
      javaSchema:
    TRACE      2015-03-18 11:30:29.379
    NWDB() done
    TRACE      2015-03-18 11:30:29.379
    NWDB._fromTable() done
    TRACE      2015-03-18 11:30:29.380
    NWDB._get() done
    TRACE      2015-03-18 11:30:29.380
    NWDB.getDBType(): ind
    TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:283]
              CGuiEngineImp::showDialogCalledByJs()
    showing dlg d_nw_ask_unpack
    TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:293]
              CGuiEngineImp::showDialogCalledByJs()
    <dialog sid="d_nw_ask_unpack">
    <title>Unpack Archives</title>
    <table enabled="true" fixedrows="true" sid="askUnpack">
    <caption>Archives to Be Unpacked</caption>
    <column enabled="true" type="check" numeric="false" upper="false" name="unpack">
      <caption>Unpack</caption>
      <helpitem id="common.Unpack"/>
      <value type="string">false</value>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="path">
      <caption>Archive</caption>
      <helpitem id="common.UnpackArchive"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="codepage">
      <caption>Codepage</caption>
      <helpitem id="common.UnpackArchiveCodepage"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="destination">
      <caption>Destination</caption>
      <helpitem id="common.UnpackArchiveDestination"/>
    </column>
    <column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
      <caption>Downloaded To</caption>
      <helpitem id="common.UnpackArchiveDownload"/>
      <value type="string"/>
    </column>
    <row rowId="0">
      <boolvalue>
      <true/>
      </boolvalue>
      <value>DBINDEP\SAPEXE.SAR</value>
      <value>Unicode</value>
      <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
      <value></value>
    </row>
    </table>
    <dialog/>
    TRACE      2015-03-18 11:30:29.391 [iaxxgenimp.cpp:1031]
              CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2015-03-18 11:30:30.617 [iaxxdlghnd.cpp:96]
              CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE      2015-03-18 11:30:30.618 [iaxxcdialogdoc.cpp:190]
              CDialogDocument::submit()
    <dialog sid="d_nw_ask_unpack">
    <table enabled="true" fixedrows="true" sid="askUnpack">
    <caption>Archives to Be Unpacked</caption>
    <column enabled="true" type="check" numeric="false" upper="false" name="unpack">
      <caption>Unpack</caption>
      <helpitem id="common.Unpack"/>
      <value type="string">false</value>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="path">
      <caption>Archive</caption>
      <helpitem id="common.UnpackArchive"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="codepage">
      <caption>Codepage</caption>
      <helpitem id="common.UnpackArchiveCodepage"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="destination">
      <caption>Destination</caption>
      <helpitem id="common.UnpackArchiveDestination"/>
    </column>
    <column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
      <caption>Downloaded To</caption>
      <helpitem id="common.UnpackArchiveDownload"/>
      <value type="string"/>
    </column>
    <row rowId="0">
      <boolvalue>
      <true/>
      </boolvalue>
      <value>DBINDEP\SAPEXE.SAR</value>
      <value>Unicode</value>
      <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
      <value/>
    </row>
    </table>
    <dialog/>
    TRACE      2015-03-18 11:30:30.646
      Call block: NW_Unpack2_ind_ind_ind_ind
        function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpackValidator_default
    is validator: true
    TRACE      2015-03-18 11:30:30.646
    NWInstall.getSystem(JEP)
    TRACE      2015-03-18 11:30:30.648
    NWOption(localExeDir).value()
    TRACE      2015-03-18 11:30:30.648
    NWOption(localExeDir).value() done: true
    TRACE      2015-03-18 11:30:30.649
    NWOption(collected).value()
    TRACE      2015-03-18 11:30:30.649
    NWOption(collected).value() done: true
    TRACE      2015-03-18 11:30:30.652
    NWInstall({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:30.653
    NW({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:30.654
    NW() done
    TRACE      2015-03-18 11:30:30.654
    NWInstall() done
    TRACE      2015-03-18 11:30:30.654
    NWInstall.getSystem() done
    TRACE      2015-03-18 11:30:30.655
    NWInstall.validateUnpackTable(t_askUnpack)
    TRACE      2015-03-18 11:30:30.657
    NWInstall.validateUnpackTable(): validating row {
      codepage:Unicode
      destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
      ownPath:
      path:DBINDEP\SAPEXE.SAR
      sid:JEP
      unpack:true
    TRACE      2015-03-18 11:30:30.659 [tablecpp.cpp:136]
              Table(t_NW_unpack).updateRow({
      cd:UKERNEL
      codepage:Unicode
      confirmUnpack:
      destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
      list:
      needUnpacking:true
      ownPath:
      path:DBINDEP\SAPEXE.SAR
      selectiveExtract:false
      sid:JEP
      unpack:true
      wasUnpacked:false
    }, WHERE sid='JEP' AND path='DBINDEP\SAPEXE.SAR' AND codepage='Unicode' AND destination='E:\usr\sap\JEP\SYS\exe\uc\NTAMD64')
    updating
    TRACE      2015-03-18 11:30:30.661
    NWInstall.validateUnpackTable() done
    TRACE      2015-03-18 11:30:30.722 [iaxxgenimp.cpp:301]
              CGuiEngineImp::showDialogCalledByJs()
    <dialog sid="d_nw_ask_unpack">
    <table enabled="true" fixedrows="true" sid="askUnpack">
    <caption>Archives to Be Unpacked</caption>
    <column enabled="true" type="check" numeric="false" upper="false" name="unpack">
      <caption>Unpack</caption>
      <helpitem id="common.Unpack"/>
      <value type="string">false</value>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="path">
      <caption>Archive</caption>
      <helpitem id="common.UnpackArchive"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="codepage">
      <caption>Codepage</caption>
      <helpitem id="common.UnpackArchiveCodepage"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="destination">
      <caption>Destination</caption>
      <helpitem id="common.UnpackArchiveDestination"/>
    </column>
    <column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
      <caption>Downloaded To</caption>
      <helpitem id="common.UnpackArchiveDownload"/>
      <value type="string"/>
    </column>
    <row rowId="0">
      <boolvalue>
      <true/>
      </boolvalue>
      <value>DBINDEP\SAPEXE.SAR</value>
      <value>Unicode</value>
      <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
      <value/>
    </row>
    </table>
    <dialog/>
    TRACE      2015-03-18 11:30:30.724 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:30.725 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:30.728 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:30.776
    The step askUnpack with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0 has been executed successfully.
    INFO      2015-03-18 11:30:30.778 [synxccuren.cpp:887]
              CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
              lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
    TRACE      2015-03-18 11:30:30.780 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:30.781 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:30.785 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:30.802 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:30.803 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:30.806 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:30.819 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:30.842 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
    TRACE      2015-03-18 11:30:30.908 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:30.909 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:30.963 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
    TRACE      2015-03-18 11:30:31.139 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    INFO      2015-03-18 11:30:31.142 [csistepexecute.cpp:1024]
    Execute step setDisplayNames of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0
    TRACE      2015-03-18 11:30:31.177
      Call block: NW_FirstClusterNode_ind_ind_ind_ind
        function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames_Preprocess
    is validator: false
    TRACE      2015-03-18 11:30:31.219 [csistepexecute.cpp:1079]
    Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|setDisplayNames returns TRUE
    TRACE      2015-03-18 11:30:31.243
      Call block: NW_FirstClusterNode_ind_ind_ind_ind
        function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames
    is validator: false
    TRACE      2015-03-18 11:30:31.246
    NWInstance.byNumberAndRealHost(00, DCEPPRDCI)
    TRACE      2015-03-18 11:30:31.246
    NWInstance.find()
    TRACE      2015-03-18 11:30:31.248
    NWOption(localExeDir).value()
    TRACE      2015-03-18 11:30:31.248
    NWOption(localExeDir).value() done: true
    TRACE      2015-03-18 11:30:31.249
    NWOption(collected).value()
    TRACE      2015-03-18 11:30:31.249
    NWOption(collected).value() done: true
    TRACE      2015-03-18 11:30:31.252
    NWInstance._fromRow({
      sid:JEP
      name:SCS00
      number:00
      host:SAPJEP
      guid:0
      realhost:dcepprdci
      type:SCS
      installationStatus:installing
      startProfileName:JEP_SCS00_SAPJEP
      instProfilePath:
      dir_profile:
      unicode:false
      collectSource:
    TRACE      2015-03-18 11:30:31.252
    NWSCSInstance()
    TRACE      2015-03-18 11:30:31.252
    NWInstance(JEP/SCS00/SAPJEP)
    TRACE      2015-03-18 11:30:31.252
    NWInstance(JEP/SCS00/SAPJEP) done
    TRACE      2015-03-18 11:30:31.253
    NWInstanceInstall()
    TRACE      2015-03-18 11:30:31.253
    NWInstanceInstall() done
    TRACE      2015-03-18 11:30:31.253
    NWInstall.getSystem(JEP)
    TRACE      2015-03-18 11:30:31.253
    NWOption(localExeDir).value()
    TRACE      2015-03-18 11:30:31.254
    NWOption(localExeDir).value() done: true
    TRACE      2015-03-18 11:30:31.254
    NWOption(collected).value()
    TRACE      2015-03-18 11:30:31.254
    NWOption(collected).value() done: true
    TRACE      2015-03-18 11:30:31.256
    NWInstall({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:31.257
    NW({
      sid:JEP
      sapDrive:E:
      dbtype:ind
      sapmnt:/sapmnt
      hasABAP:false
      hasJava:true
      isAddinInstallation:undefined
      unicode:true
      workplace:undefined
      loadType:SAP
      umeConfiguration:
      doMigMonConfig:
      useParallelAbapSystemCopy:
      dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
      os4_krnlib:
      os4_seclanglib:
      useCurrentUser:false
      noShares:false
    TRACE      2015-03-18 11:30:31.258
    NW() done
    TRACE      2015-03-18 11:30:31.258
    NWInstall() done
    TRACE      2015-03-18 11:30:31.258
    NWInstall.getSystem() done
    TRACE      2015-03-18 11:30:31.258
    NWSCSInstance() done
    TRACE      2015-03-18 11:30:31.259
    NWInstance._fromRow() done
    TRACE      2015-03-18 11:30:31.259
    NWInstance._fromRow({
      sid:JEP
      name:ERS10
      number:10
      host:SAPJEP
      guid:1
      realhost:dcepprdci
      type:ERS
      installationStatus:installing
      startProfileName:JEP_ERS10_SAPJEP
      instProfilePath:
      dir_profile:
      unicode:false
      collectSource:
    TRACE      2015-03-18 11:30:31.259
    NWERSInstance()
    TRACE      2015-03-18 11:30:31.260
    NWInstance(JEP/ERS10/SAPJEP)
    TRACE      2015-03-18 11:30:31.260
    NWInstance(JEP/ERS10/SAPJEP) done
    TRACE      2015-03-18 11:30:31.260
    NWInstanceInstall()
    TRACE      2015-03-18 11:30:31.260
    NWInstanceInstall() done
    TRACE      2015-03-18 11:30:31.261
    NWERSInstance() done
    TRACE      2015-03-18 11:30:31.261
    NWInstance._fromRow() done
    TRACE      2015-03-18 11:30:31.261
    NWInstance.find() done: 1 instances found
    TRACE      2015-03-18 11:30:31.261
    t_scs.setDisplayName([nw.progress.installInstance, SCS00], WHERE ROWNUM=0)
    TRACE      2015-03-18 11:30:31.305
    The step setDisplayNames with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0 has been executed successfully.
    INFO      2015-03-18 11:30:31.307 [synxccuren.cpp:887]
              CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
              lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
    TRACE      2015-03-18 11:30:31.362
    Build Client for subcomponent |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_FinishFirstClusterNode|ind|ind|ind|ind|finishFirst|0
    TRACE      2015-03-18 11:30:31.364
    TRACE      2015-03-18 11:30:31.364 [ccdclient.cpp:22]
              CCdClient::CCdClient()
    TRACE      2015-03-18 11:30:31.385 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:31.387 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
    TRACE      2015-03-18 11:30:31.390 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:31.406 [cpropertycontentmanager.hpp:220]
              CPropertyContentManager::logMissingParameters()
    The following parameters can be set via SAPINST_PARAMETER_CONTAINER_URL (inifile.xml) but not via SAPINST_INPUT_PARAMETERS_URL:
    Component 'NW_ERS_Instance': ersInstanceNumber, restartSCS
    Component 'NW_GetDomainOU': isOUInstallation, ou_delimiter, windows_domain_ous
    Component 'NW_GetSidFromCluster': clusterGroup, isUnicode, localDrive, network, networkName, sharedDrive, sid, useDHCP
    Component 'NW_GetUserParameterWindows': sapDomain, sapServiceSIDPassword, sidAdmPassword
    Component 'NW_SAPCrypto': installSAPCrypto
    Component 'NW_SCS_Instance': instanceNumber, scsMSPort, scsMSPortInternal
    Component 'Preinstall': installationMode
    INFO      2015-03-18 11:30:31.802 [synxcpath.cpp:799]
              CSyPath::createFile() lib=syslib module=syslib
    Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\summary.html.
    TRACE      2015-03-18 11:30:31.828 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:31.852 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
    TRACE      2015-03-18 11:30:31.916 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:31.917 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:31.971 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
    TRACE      2015-03-18 11:30:32.152 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:32.154 [sixxbsummary.cpp:320]
              CSiSummaryContainer::showDialog()
    <?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog version="1.0" sid="diReviewDialog"> <title>Parameter Summary</title><description>Choose 'Next' to start with the values shown. Otherwise, select the parameters to be changed and choose 'Revise'. You are then taken to the screen where you can change the parameter. You might be guided through other screens that have so far been processed.</description> <review id="review_controll"><caption><![CDATA[Parameter list]]></caption><inputgroup id="ID_1"> <caption><![CDATA[Drive for Local Instances]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_2"><pulldown edit="false" enabled="true" highlight="false" sid="localDrive">
    <caption>Destination Drive for Local Instances</caption>
    <helpitem id="mscs.SelectLocalDrive"/>
    <value>C:</value>
    <value>D:</value>
    <selectvalue>D:</selectvalue>
    </pulldown></input></inputgroup><inputgroup id="ID_3"> <caption><![CDATA[SAP System Cluster Parameters]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_4"><field enabled="true" highlight="false" sid="sid">
    <caption>SAP System ID (SAPSID)</caption>
    <helpitem id="common.SAPSystemIDCIDB"/>
    <value type="upper" maxlength="3" regexp="^[A-Z][A-Z0-9]{2}" minlength="3">JEP</value>
    </field></input><input  id="ID_5"><field enabled="true" highlight="false" sid="networkName">
    <caption>Network Name (SAP Virtual Instance Host)</caption>
    <helpitem id="common.VirtualInstanceHostWindowsMSCS"/>
    <value type="string" maxlength="13" minlength="1">SAPJEP</value>
    </field></input><input  id="ID_6"><pulldown edit="false" enabled="true" highlight="false" sid="network">
    <caption>Use Public Network</caption>
    <helpitem id="mscs.UsePublicNetwork"/>
    <value>Cluster Network 1</value>
    <selectvalue>Cluster Network 1</selectvalue>
    </pulldown></input><input  id="ID_7"><pulldown edit="false" enabled="true" highlight="false" sid="sharedDrive">
    <caption>Destination Drive for Clustered Instances</caption>
    <helpitem id="mscs.SelectSharedDrive"/>
    <value>BACKUP</value>
    <value>SAP_USR_SID_CI_NODE</value>
    <value>SAPDATA1</value>
    <value>SAPDATA2</value>
    <value>SAPDATA3</value>
    <value>SAPDATA4</value>
    <value>SAPLOG1</value>
    <value>SAPLOG2</value>
    <value>SAPTEMP_SAPDIAG_SAPSYBSYSTEM</value>
    <value>SYBASE</value>
    <selectvalue>SAP_USR_SID_CI_NODE</selectvalue>
    </pulldown></input></inputgroup><inputgroup id="ID_8"> <caption><![CDATA[DNS Domain Name]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_9"><check enabled="true" highlight="false" sid="setFQDN">
    <caption>Set FQDN for SAP system</caption>
    <helpitem id="common.FullyQualifiedDomainNameSelect"/>
    <boolvalue>
      <true/>
    </boolvalue>
    </check></input><input  id="ID_10"><field enabled="true" highlight="false" sid="FQDN" depends="setFQDN">
    <caption>DNS Domain Name for SAP System</caption>
    <helpitem id="common.FullyQualifiedDomainName"/>
    <value type="string" regexp="^[^.]+.*$" minlength="1">jnport.com</value>
    </field></input></inputgroup><inputgroup id="ID_11"> <caption><![CDATA[Windows Domain]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_12"><radiobox enabled="true" highlight="false" sid="domainType">
    <caption>Domain Model</caption>
    <helpitem id="common.DomainModelDomainLocal"/>
    <radio enabled="true" sid="global">
      <caption>Domain of Current User</caption>
      <boolvalue>
      <true/>
      </boolvalue>
    </radio>
    <radio enabled="true" sid="other">
      <caption>Different Domain</caption>
    </radio>
    </radiobox></input></inputgroup><inputgroup id="ID_13"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_14"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
    <caption>Password of SAP System Administrator</caption>
    <helpitem id="common.PasswordCreateExistsOS"/>
    <encrvalue maxlength="63">*****</encrvalue>
    </password></input><input  id="ID_15"><password confirm="true" enabled="true" highlight="false" sid="sapServiceSIDPassword">
    <caption>Password of SAP System Service User</caption>
    <helpitem id="common.PasswordCreateExistsOS"/>
    <encrvalue maxlength="63">*****</encrvalue>
    </password></input></inputgroup><inputgroup id="ID_16"> <caption><![CDATA[Windows Domain for SAP Host Agent]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_17"><radiobox enabled="true" highlight="false" sid="domainType">
    <caption>Domain Model</caption>
    <helpitem id="common.DomainModelDomainLocal"/>
    <radio enabled="true" sid="local">
      <caption>Local Domain</caption>
      <boolvalue>
      <true/>
      </boolvalue>
    </radio>
    <radio enabled="true" sid="global">
      <caption>Domain of Current User</caption>
    </radio>
    <radio enabled="true" sid="other">
      <caption>Different Domain</caption>
    </radio>
    </radiobox></input></inputgroup><inputgroup id="ID_18"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_19"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
    <caption>Password of SAP System Administrator</caption>
    <helpitem id="common.PasswordCreateExistsOS"/>
    <encrvalue maxlength="63">*****</encrvalue>
    </password></input></inputgroup><inputgroup id="ID_20"> <caption><![CDATA[SCS Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_21"><field enabled="true" highlight="false" sid="instanceNumber">
    <caption>SCS Instance Number</caption>
    <helpitem id="common.InstanceNumberCreate"/>
    <value type="string" maxlength="2" regexp="[0-9]{2}" minlength="2">00</value>
    </field></input></inputgroup><inputgroup id="ID_22"> <caption><![CDATA[Java Message Server Port]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_23"><field enabled="true" highlight="false" sid="scsMSPortInternal">
    <caption>Internal Java Message Server Port</caption>
    <helpitem id="common.InternalMessagePort"/>
    <value type="numeric" maxlength="5" min="1025" max="65535">3900</value>
    </field></input></inputgroup><inputgroup id="ID_24"> <caption><![CDATA[Enqueue Replication Server  Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_25"><field enabled="true" highlight="false" sid="ersInstanceNumber">
    <caption>Number of the ERS Instance</caption>
    <helpitem id="common.InstanceNumberCreate"/>
    <value type="numeric" maxlength="2" max="99" minlength="2">10</value>
    </field></input><input  id="ID_26"><field enabled="true" highlight="false" sid="ersVirtualHostname">
    <caption>ERS Instance - Virtual Host Name</caption>
    <helpitem id="common.virtualHostname"/>
    <value type="string" maxlength="60" minlength="1">SAPJEP</value>
    </field></input></inputgroup><inputgroup id="ID_27"> <caption><![CDATA[Unpack Archives]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input  id="ID_28"><table enabled="true" fixedrows="true" sid="askUnpack">
    <caption>Archives to Be Unpacked</caption>
    <column enabled="true" type="check" numeric="false" upper="false" name="unpack">
      <caption>Unpack</caption>
      <helpitem id="common.Unpack"/>
      <value type="string">false</value>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="path">
      <caption>Archive</caption>
      <helpitem id="common.UnpackArchive"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="codepage">
      <caption>Codepage</caption>
      <helpitem id="common.UnpackArchiveCodepage"/>
    </column>
    <column enabled="false" type="field" numeric="false" upper="false" name="destination">
      <caption>Destination</caption>
      <helpitem id="common.UnpackArchiveDestination"/>
    </column>
    <column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
      <caption>Downloaded To</caption>
      <helpitem id="common.UnpackArchiveDownload"/>
      <value type="string"/>
    </column>
    <row rowId="0">
      <boolvalue>
      <true/>
      </boolvalue>
      <value>DBINDEP\SAPEXE.SAR</value>
      <value>Unicode</value>
      <value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
      <value/>
    </row>
    </table></input></inputgroup></review><button sid="btPREV" default="false" enabled="false" ><caption>&lt; &amp;Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" default="true"><caption>&amp;Next</caption><action>ACTION_NEXT</action><tooltiphelp><![CDATA[Continue processing]]></tooltiphelp></button><button sid="btEDIT"><caption>&amp;Revise</caption><action>ACTION_EDIT</action><tooltiphelp><![CDATA[Edit input values]]></tooltiphelp></button><button sid="btDETAIL" default="true"><caption>Show &amp;Detail</caption><action>ACTION_CBD_DETAIL</action><tooltiphelp><![CDATA[Show all input values]]></tooltiphelp></button></dialog></sapinstgui>
    TRACE      2015-03-18 11:30:32.161 [iaxxgenimp.cpp:1031]
              CGuiEngineImp::acceptAnswerForBlockingRequest
    Waiting for an answer from GUI
    TRACE      2015-03-18 11:30:33.330 [sixxbsummary.cpp:83]
              CSiSummaryContainer::setDocument(const iXMLDocument & doc)
    <?xml version="1.0" encoding="utf-8"?>
    <sapinstguiresp>
    <action>ACTION_NEXT</action>
    <dialog sid="diReviewDialog">
      <review id="review_controll"/>
    </dialog>
    </sapinstguiresp>
    TRACE      2015-03-18 11:30:33.331 [iaxxdlghnd.cpp:96]
              CDialogHandler::doHandleDoc()
    CDialogHandler: ACTION_NEXT requested
    TRACE      2015-03-18 11:30:33.331 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:33.356 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
    TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:33.429 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
    TRACE      2015-03-18 11:30:33.500 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:33.773
    Status of Step |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 is not OK. So we have to restart at this point.
    TRACE      2015-03-18 11:30:33.773
    Switch to STANDARD mode
    TRACE      2015-03-18 11:30:33.773 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:33.801 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
    TRACE      2015-03-18 11:30:33.866 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:33.868 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:33.926 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
    TRACE      2015-03-18 11:30:34.67 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    INFO      2015-03-18 11:30:34.67 [csistepexecute.cpp:1024]
    Execute step ntpatch2 of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0
    TRACE      2015-03-18 11:30:34.084
      Call block: NW_Update_DLLs_ind_ind_ind_ind
        function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2_Preprocess
    is validator: false
    TRACE      2015-03-18 11:30:34.115 [csistepexecute.cpp:1079]
    Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 returns TRUE
    TRACE      2015-03-18 11:30:34.127
      Call block: NW_Update_DLLs_ind_ind_ind_ind
        function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2
    is validator: false
    TRACE      2015-03-18 11:30:34.127
    NW_Update_DLLs.installDLLs(false)
    TRACE      2015-03-18 11:30:34.127
    NW_Update_DLLs.installDLLs() already run
    TRACE      2015-03-18 11:30:34.153
    The step ntpatch2 with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0 has been executed successfully.
    INFO      2015-03-18 11:30:34.154 [synxccuren.cpp:887]
              CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
              lib=syslib module=syslib
    Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
    TRACE      2015-03-18 11:30:34.187 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:34.200 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
    TRACE      2015-03-18 11:30:34.255 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    TRACE      2015-03-18 11:30:34.256 [kdxxctaco.cpp:93]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile start ...
    TRACE      2015-03-18 11:30:34.283 [kdxxctaco.cpp:121]
              CKdbTableContainerImpl::syncToContainerFile
    after creating out stream  for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
    TRACE      2015-03-18 11:30:34.425 [kdxxctaco.cpp:155]
              CKdbTableContainerImpl::syncToContainerFile
    CKdbTableContainerImpl::syncToContainerFile stop ...
    INFO      2015-03-18 11:30:34.426 [csistepexecute.cpp:1024]
    Execute s

    Hello Arjun,
    Have you executed any other installation prior this attempt?
    It seems there are unfinished installations on this server. If this is the case, run the SWPM to uninstall the unfinished installation. Then, execute the installation once again.
    Also, make sure all IPs are corrects in the DND and host files. There were cases in which the IPs were not properly configured, or maybe a typo.
    Regards,
    Henrique Girardi
    SAP Active Global Support
    #2081285 - How to enter good search terms to an SAP search?
    https://service.sap.com/sap/support/notes/2081285
    SWPM Troubleshooting documents:
    http://scn.sap.com/docs/DOC-62646

  • Error while Installing Nw04S SR2 Developer Workplace - Import Java Dump

    Hi All,
    Iam trying to install NW04S SR2 Developer Workplace.Iam getting error in 15 th step i.e Import Java Dump.
    I have gone thru SDN threads and check the basic things like
    Java Version,whether i can connect to database or not..
    Iam using SQL Server 2005,Win XP.The database is fine.
    Please find the log file content below and let me know  how to resolve the problem.
    J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML" -log jload.log" finished with return code 1. Output:
    java version "1.4.2_14"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
    Java HotSpot(TM) Client VM (build 1.4.2_14-b05, mixed mode)
    15-Apr-2009 15:31:22 com.sap.inst.jload.Jload main
    INFO: Jload -sec J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML -log jload.log
    15-Apr-2009 15:31:51 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    15-Apr-2009 15:31:51 com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Error establishing socket to host and port: GBC7621C:1433. Reason: Connection refused: connect
         at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.sap.nwmss.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
         at com.sap.nwmss.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.connect(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseConnection.open(Unknown Source)
         at com.sap.nwmss.jdbc.base.BaseDriver.connect(Unknown Source)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
         at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
         at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
         at com.sap.inst.jload.Jload.main(Jload.java:580)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ERROR 2009-04-15 15:31:52
    CJS-30049  <html>Execution of JLoad tool 'C:\j2sdk1.4.2_14\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/install/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/base.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/util.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/sqlserver.jar;C:/usr/sap/J2E/SYS/exe/uc/NTI386/mssjdbc/spy.jar" -sec J2E,jdbc/pool/J2E,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
    GBC7621C/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir C:/NW04s/51032258\JAVA_EXPORT\JDMP -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MSSQL\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MSSQL/jload.java.log' for more information.</html>
    ERROR 2009-04-15 15:31:52
    FCO-00011  The step importJavaDump with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
    Thanks,
    Anil.

    > 15-Apr-2009 15:31:51 com.sap.inst.jload.Jload main
    > SEVERE: couldn't connect to DB
    > 15-Apr-2009 15:31:51 com.sap.inst.jload.Jload logStackTrace
    > SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver]Error establishing socket to host and port: GBC7621C:1433. Reason: Connection refused: connect
    as you see yourself the jload is unable to connect to the database.
    Check that your firewall is properly configured and that the SQL Server agent is running.
    Markus

  • Error Deploying DictionaryProject to NetWeaver 7.0 SR2 ABAP-Java-Trial

    Hi,
    I built a simple DictionaryProject with Netweaver Developer Studio. Only one table with an ID-KeyColumn.
    But deployment to NetWeaver 7.0 SR2 ABAP-Java-Trial-VMWare failed with following error:
    Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
    Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Table BC_DDDBRTH: Error during reading of columns from db
    Feb 11, 2008 11:43:30... Info: E R R O R ******* (DbColumns)
    Feb 11, 2008 11:43:30... Info: 23:43:30 2008-02-11 dbs-Error: Caused by: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805 Stack trace: com.ibm.db2.jcc.a.SqlException: DB2 SQL error: SQLCODE: -443, SQLSTATE: 38553, SQLERRMC: SYSIBM.SQLCOLUMNS;COLUMNS;SYSIBM:CLI:-805
    The trial is runnign DB2 on SLES
    Thank you,
    Josh

    Hi Josh,
    please apply note 823019 .You need to logon as user db2<sid>  and run:
    cd sqllib/bnd                     # UNIX
    db2 connect to <sid>
    db2 bind db2schema.bnd blocking all grant public sqlerror continue
    Regards
                  Frank

  • MBP no longer able to log in on WIN2003 FILE server

    New MBP in Aug,08. Able to access WIN2003 file server with typical clicks in Finder. Then comes October upgrade to Leopard, and this results in only being able to access file server by Finder>apple+k>connect to server by smb://##.##.##.##
    Finally in December after an "upgrade" on the file server done by our IT person, I can no longer access the file server. I perform either of the above approaches to logging in and it just "hangs"...no error message, it just keeps trying, but never says that it can't find the server.
    So, the IT person has done changes like taking down firewall and changing some of the enable/disable settings recommended on other chat sites for similar issues, but to no avail. HELP!

    Never mind...my password to access file server contained a character that was not acceptable. Once changed, access restored.

  • DLU no longer working on win2003 Term Serv

    Hi:
    Last night, I had to flatten & reload a win2003 Terminal Server. Re-installed the 4.90sp2 client and ZfD4 agent and now my DLU's no longer work.
    More info: When I install the agent (either zfd401_ir4a or ir6), it forces me to enter an address for the Middle Tier Server. Historically, I could just <next> right past that since we don't have a Middle Tier Server. Is this because the agent isn't seeing the 4.90sp2 client?
    Any thoughts? Users can't login twice you know.... Thanks.
    Steve.

    Seems to be a problem here.
    The only thing I see at:
    HKLM/Software/Novell/Workstation Manager/Identification
    is:
    Name - Type - Data
    Default - REG_SZ - (value not set)
    Steve.
    >>> Marcus Breiden<[email protected]> 09/08/05 04:07AM >>>
    On Thu, 08 Sep 2005 02:37:41 GMT, Steven Singhose wrote:
    > More info: When I install the agent (either zfd401_ir4a or ir6), it forces me to enter an address for the Middle Tier Server. Historically, I could just <next> right past that since we don't have a Middle Tier Server. Is this because the agent isn't seeing the 4.90sp2 client?
    no... you can always leave that field empty..
    make sure that the tree in
    HKLM/Software/Novell/Workstation Manager/Identification
    is correct... zenpol32.dll is only in the agent directory and the agent in
    the path..
    Marcus Breiden
    Please change -- to - to mail me.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

Maybe you are looking for

  • FYI Notification getting canceled while sending notiifcation 2nd time

    Hello Gurus, I have a custom workflow which incorporates AME and AME returns 2 of FYI Receivers groups at the end. I have designed the workflow so that It get the approval group from AME and checks if thats the FYI Group or not. If its FYI Group then

  • Print PDF via online subscription direct

    How can you create a PDF using adobe online subscription directly from the "print" function?

  • After like 10 minutes internet stops working

    okay so this all started when i updated to dp 3 or something, then the internet started acting up.....no matter if i update or not (this has been going on for like a month, and i'm on the actual release of yosemite) it keeps on doing this stuff where

  • Converting to jpeg in CS2 after skin softening in LR2.4

    I have not used Adjustment Brushes much, so I do not know if this is a known problem. Running with XP. I did a skin softening, cropped and exported as a tiff. Went to CS2, opened file, did some acne removal, and went to save as a jpeg to send to lab.

  • Single droptarget for multiple movie clips

    I have a movie clip which i use as a drop target. And I have four additional movie clips which can be dragged and dropped into the droptarget movie clip. But when I place a movie clip into a droptarget and I drop the second one too, the droptarget fo