R3AD_MATERIA00000 SYSFAIL STATUS

Hi,
While monitoring SMQ2 in CRM System we found,one queue R3AD_MAT* is in SYSFAIL status. I tried to Reprocess the queue,but the queue remains in sysfail status with error " Error in Mapping (Details: transaction SMW01".
And I checked SMW01,found one bdoc was in E04 state with error " Value YDU is not permitted for attribute CRMT_PRC_GROUP4". Bdoc type Product_Mat.
Kindly let me know how to clear the sysfail status queue.
Regards,
PV.

Hi PV,
According to the error seen in SMW01 it appears that a product was replicated which had product group 4 YDU assigned to it, which does not exist in the system. Do an initial download using the adapter object which gets product group details. And than try to reprocess this Bdoc or remove the product group assignement from the product master and reprocess the Bdoc again.
Product groups are seen in the Sales and distribution Tab of product master
(T Code:COMMPR01)
Regards,
Shalini Chauhan

Similar Messages

SYSFAIL status in SMQ2

Greetings
Ive started customer_main intial load and its still in running status.
SMQ2 shows R3AI_CUSTOMER_MAIN in SYSFAIL status.
When I double click on it it throws out error in Mapping( Details: Transaction SMW01)
No queues in R3
Pleaze advice im still fairly new to this middleware issue. How to fix this problem i am having
Thesen

Hi Shanthala
In CRM table CRMM_BUT_CUSTTNO shows 2 different customer no's for the same partner guid
in R3 under table CRMKUNNR it shows one customer no for one partner guid which looks correct
Any idea how this happend and what the cause might be
Thesen

Sysfail status

Hi all,
In Moni .all the messages are waiting in queue and queue status is SYSFAIl ..when ever i release the key message went through ,..what type of problem is this..is this because of communication between the two systems failed or some other problem..
Thanks for your time.
Regards
Rao

Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queues status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

BP Creation in CRM- Queues stuck in SMQ1 - SYSFAIL Status

Hi ,
When we create a BP in CRM , The BP Queues R3AUBUPA* has are stuck in SMQ1 in CRM with status SYSFAIL . The detailed Error description is " Function module "CRM_BUPA_BDOC_MAP_NUMRANGE" not found"
We have already maintained the following entry in table CRMC_BUT_CALL_FU in CRM with call indicator set.
Event Object Item FM
CRMIN BUPA 50000 CRM_BUPA_BDOC_MAP_NUMRANGE
Do we need to maintain this FM somewhere else?
Help us to solve this issue.
Regards,
Shaik

hi Shaik
How did you solved this

Sysfail status in SMQ1

Hi
I have sysfail error in tRFC and qRFC (SM58 and SMQ1) Error message with function module not found and exception raised .Scenario is from ECC-XI-Third party system.
Checked for dumps in SAP XI where in I could get the following message " Error in ABAP Program "SAPMSSY1"and the program is terminated Probably due to an error in program .this is a standard Program and moreover this interface has run successful till april end
Please let me know your suggestions to clear off the sysfail status

Hi
check the reply of Rob at this thread regarding error with SAPMSSY1 program
Re: ABAP statement RSYN
Regards
Abhishek

[Urgent] Queues are blocked in status SYSFAIL

Hi experts,
I have the following problem that arose unexpectedly in an XI 3.0 installation:
Queues are blocked in SYSFAIL status and when I click on one entry, I get message: XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped
It seems to me that J2EE stack cannot connect to ABAP stack.
When I test INTEGRATION_DIRECTORY_HMI connection in sm59, I get no reply..
I cannot logon to Visual Administrator. It stops at 99%.
Hardly can I connect to Integration Builder.
Any ideas.
I need your help ASAP.
Evaggelos

Hi Evaggelos,
>I cannot logon to Visual Administrator. It stops at 99%.
Is your XI installation over?
We had a similar problem in one of my earlier projects. We restarted the server and everything started working fine.
If it is possible you can try the same.
Regards,
Sumit

SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

Hi,
We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
I do not understand whereelse I can see the detailed error message.
This error does not occur for all articles.
As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
Thanks and Regards,
Lakshmi

Hi Lakshmi,
Please follow as below:
SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
Regards...
Arup

Queue SYSFAIL after message split "Whole number overflow on addition"

Hi,
I'm using a message mapping in PI 7.1 to split a message in several messages for each line of an invoice. It's a mapping 1 to 0..n. Everything went well since I had maximum 100 invoice lines to split (then 100 messages at the output of the mapping).
But since I have now messages with 200 invoice lines, everytime the queue is stopped in SYSFAIL status with a message "Whole number overflow on addition". But all messages are processed even if the queue is stopped.
ST22 gives me a COMPUTE_INT_PLUS_OVERFLOW in the method determin_message_size. It seams that PI doen't support a large message at output of a mapping. How can I split the message into multple messages at the outplut of a message mapping ?
Does anyone have a solution ?

Hi,
I guess you can use the Message Packing feature.
See below the links to help you:
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7ef9124f176be3e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/7a6e3469454b2be10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/46/79e8e13872275ae10000000a11466f/frameset.htm
Regards,
Caio Cagnani

R3AD_SALESDO0004700962 in syafal status

Hi all,
While checking SMQ2 in CRM , we found R3AD_SALESDO0004700962 is sysfail status .
We checked SMW01 transaction,found few bdocs are in E08(mapping error) state with error "A business transaction already exists with the number xxxxxxxxxx".
Bdoc type : BUS_TRANS_MSG
state : E08(Mapping error)
could some one help me how to clear the sysfail queue and bdocs.it very urgent.
Thanks in advance,
P.V

Hi,
I think there is a clash with the internal and external Number ranges used by the transaciton type.
Please check if both number ranges are overlapping?

Sysfail queue: queue stopped

i have some scenarios runnnig in my system, some scenarios are failing due to queue STOP,
when i click the queue name from the MONI, it shows that three queues namely XBTI007, XBTI003, XBTI004 are in SYSFAIL status,
when i cllick those queues, i find some 1000 entries in each of the queue,
the topmost entry shows that qRFC SXMS_ASYNC_EXEC failed due to
reason: COMMIT/ROLLBACK error on "DEFAULT" database connection...
there are many scenarios getiing stuck but i could find that the a particular scenarios qRFC execution lead to the error,
but since all the scenarios are getting stuck ....
wat action can i take....
if i select the entry with sysfail status and activate the queue, will it hamper something...
will data loss happen??
pls help...its in production system

Dhar,
SMQ2 is for outbound queue and SMQ1 is inbound queue. If you are getting the messages into XI then check in SMQ1 for any errors in XI and if you are sending out from XI then see SMQ2. Check this help for some more information on this:
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Regards,
---Satish

EOIO Queues - Sysfail..

Hi,
I am getting messages from SRM to Int Server of XI directly using SAP Delivered BADI and in the BADI serialization is set so those Messages goes in to EOIO Queues.
Now all the Messages are stuck in different EOIO queues with Sysfail status of Queues Now so far there is two types of Sysfail errors:
1. XI Error NO_RECEIVER_CASE_ASYNC.RCVR_DETERMINATION
(Only one message in this status though I have tested the configuration In XI IR and works successfully)
2. An exception occurred that was not caught (All toghather 5 messages)
Any suggestion what can be the Case?
Thanks,

Hi,
I have recreated all the config objects again so it solved the first problem but the second problem is still there and the queues are still getting stuck saying
An exception occurred that was not caught.
and when I click the queue it opens the ABAP code for function module SXMS_ASYNC_EXEC
Detailed analysis in SXMB_MONI:
the message processing is stuck at "Message Branch According to Receiver List" step. Also in the trace of the same step I can see following:
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Root-Exception from packaging: An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause</Trace>
<Trace level="1" type="T">Continue single processing</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
Any help resolving this will be appreciated.
Thanks.
-Adrean.
Message was edited by:
Adrean Hart

SMQ2 - SYSFAIL - Exception condition "LOGSYS_FOR_GUID_CHANGED" rai - Active

Dear Experts,
Greetings!!.
In CRM SMQ2, ( inbound Queue ), I have a queue "R3AD_ZDNL_COND_A956" displays as a "sysfail" and have unlocked no change in statuses. I been still double clicked on the queue and displays as
"Exception condition "LOGSYS_FOR_GUID_CHANGED" rai"
How to activate this queue from sysfails status.
Regards,
Sany

Dear Rohit,
Thanks and Greetings!!!.
I have Checked both
Cl.     Log.System
700     LOGSYS700                83ABE443CF1B475CE1000000AC16020D     CRM
700     LOGSYS700                83ABE443CF1B475CE1000000AC16020D     R/3
Both are Same, but still the queue is not able to active. If i Delete the entries what implication in CRM and R/3 please clarify me on the same.
Thanking you in anticipation.
Thanks and Warm Regards,
Sany.

Sysfail locks smq2 queue

Hi,
We are live with our PI7.1 system as of 11/6 and are seeing serious issues when a data error causes a sysfail for a SMQ2 queue. At this point the queue is locked for further processing. We have monitors setup which page us for this situation. However, we really need to prevent the queue from locking so other messages are sent even when one item is in sysfail status.
Notes 813209 and 1118297 do not seem to offer any help is this situation.
Is there a way to prevent the queue from locking due to sysfail status messages?
Any help is greatly appreciated.
Regards,
Rick Taylor

Rick,
Check out this blog..
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1371322850DB11715461650132929943End?blog=/pub/wlg/2728
"For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues. "
I remember there is a way to put error messages in different queue so that current queue wont b lock anymore...I'll check and let you know.
Hope this will help.
Thanks,
Nilesh

SMQ2 Error SYSFAIL

Hello experts
I have moved all the XI developments into Production and wanted to test one of the scenario , when i sent an IDOC to XU production
In SXMB_MONI i get a green flag , but has error in queue , when i checked SMQ2 it has SYSFAIL error .
The excat ERROR is "prefix number: entry missing for system XIP client 200."
It is a new XI installation , Is there any thing missing ?
You help is much appriciated.
Sudheer

Hi Sudheer,
a) qRFC Errors
Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queueu2019s status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
b) tRFC Errors
Like qRFC errors one can either manually or automatically initiated processing of messages hanged tRFC calls.
Manual Resend of messages: Use transaction SM58 and check through the list. If necessary, start hanging tRFC calls
under the Edit menu by choosing Execute LUWs.
For automatic tRfC failure recover, schedule the report RSARFCEX for periodic execution.
c) Other Errors
All the errors generated and captured in Integration engine can be viewed using transaction SXMB_MONI. Message that were sent asynchronously and had failed due transient system/configuration failures can be manually restarted in SXMB_MONI.
Reward points if this helps
Regards
Vani.

Unable to fulfil request for 3971508 bytes of memory space in SMQ2 -SYSFAIL

Hi Experts,
In Production Server PI SMQ2 transaction, I am getting SYSFAIL Status for a specific Queue Name <XBTO6___0000>. When I am double clicking it is showing "Unable to fulfil request for 3971508 bytes of memory space". I have tried to "Execute LUW" but the status is not changing at all. I have gone to the Message in SXMB_MONI, it is showing "Recorded for Outbound Processing".
Please advice as it is continously taking more and more Queue Entries.
Thanks,
Nabendu.

Hi Nabendu,
May be this thread will help you...have a look..
Re: Unable to fulfil request for 528700 bytes of stora ge space.
Regds,
Pinangshuk.

R3AD_MATERIA00000 SYSFAIL STATUS

Similar Messages

Maybe you are looking for