R9 280X flicker
I bought an MSI R9 280X from scan in Febuary it worked fine for about 6-8 weeks then I started to notice a flicker/jump on the screen every now and then. I tried everything I could swapping cables, monitors, power sockets but the problem remained. When I run use the pc without the GPU there is no flicker. I RMA it to scan where they could not find a problem but that maybe because they don't have anyone staying by the pc watching it all they can do is run certain test. Anyway after a little hassle they returned it to MSI and they said they would replace but I was never told if the fault was found. I got the replacement but the same problem is happening. It only seems to happen on 2d applications watching movies surfing the net even as I type here. But haven't noticed it happening in games. I have tried MSI support but I'm not being helped and scan will only go through the whole RMA again. Can anyone help I would really appreciate it, I've spent £240 on this card and it's stressing me out now.
specs
windows 8.1 64 bit
Z87i gaming ac
XFX 650w XXX edition semi modular
Samsung evo 840 250gb
Intel Core i5 4670K
Hi, thanks for the reply and help. I installed the app and I have notice that the flicker has stopped when I'm running the app in either OC, gaming or silent. Is this because it keeps the clock speeds constantly high? I'm new to pc gaming and gpus so I only have some basic knowledge. Also is it safe to constantly have these modes on, will it have a negative effect in anyway? thanks again
Similar Messages
-
Temporary Solution for screen flicker r9 280x
After performing various tests I've fixed the screen flickering on my msi r9 280x, I hope this can be useful for all here with the same problem and with different patterns of R9 family, that I have running on my pc and I have not had even the slightest flicker playing youtube videos where the problem became acute.
1 open the task manager and end the process Catalyst Control Center: Monitoring program and also the Catalyst Control Center: Host Application.
2 Go to C: \ Users \ XXX \ AppData \ Local \ ATI \ ACE right click on the Profiles file, in the end the general menu select Read only, accept.
3 Again right click and select edit, and file searches within these lines
<Feature name="CoreVoltageTarget_PCI_VEN_1002&DEV_6798&SUBSYS_27751462&REV_00_4&320ACFF0&0&0010A">
<Property name = "Want_0" value = "850" /> CHANGE THIS VALUE OF 850 FOR 900 only
<Property name = "Want_1" value = "1200" />
This value changes the low voltage in 2d (resting) 0.85va 0.90v
4 then go to the File menu, select Save As, in writing profiles.xml nombe save.
5 Again right click on the profiles file saved on the desktop and select read-only
6 Go back to Go to C: \ Users \ XXX \ AppData \ Local \ ATI \ ACE and remove the profiles file.
7 copy or cut and paste into C profiles saved file to your desktop: \ Users \ XXX \ AppData \ Local \ ATI \ ACE.
8 Finally go to task manager and then click on file to run new task, we write MOM.exe there and ready, restart the pc for security.
to ensure that its voltage is at 0.90v use GPUZ and check the end of the sensors tab.
note that if we use the application msi afterburner not enable Unofficial Overclocking mode option because in themselves to have it on and change the clocks video card testing restores the voltage 0.85V.
when I play some games I use msi afterburner like msi Gaming app since I have experienced that without the Gaming app clocks fall then at 300mhz after making this process voltage, I recommend you use to see, as an example in msi afterburner I apply the core clocks of vga 1100 and Gaming active app one of the two profiles, the Gaming mode or the mode Oc down and watches only parameters selecionados 1020 mhz or 1050 mhz vga respectively when accelerating up to 1100 mhz selected msi afterburner.
I hope this is useful that I share as many as we can not believe that to date no actions are taken to this problem taking into account the value of the video card. Maybe this and many what they knew, but there will be many who do not and those like me tried in many ways to carry it out and not succeeded because that's how I achieved step by step and fully functional, sorry if some way I can not explain to clearly as I do not speak English and I'm using a translator, and hopefully serve them again, I just do it to help them all and hopefully once and for all of the annoying screen flicker go ...Ryan Dinan, "Importing Photoshop files into Illustrator CS3" #27, 22 Oct 2007 7:00 pm
-
[REQUEST] VBIOS UPDATE R9 280X Monitor Screen Flicker
Hi, MSI Support
I got issue here. After RMA my MSI R9 280X V1.0 board to MSI R9 280X V1.2 board, I got issue with google chome. If I use hardware acceleration in chrome setting, for playback flash player and html 5 web player my screen monitor geeting flicker. what should I do? update Vbios or Issue cannot resolve..
S/N : 602-V277-38SB1403026567
BIOS VERSION: 015.042.000.000.003435
LINK for Bios: https://drive.google.com/file/d/0B45CDoCS72YAMms3Z09XMlFnWDA/edit?usp=sharing
Thanks.Quote
Hi, MSI Support
Nope, this is a Users-to-Users Forum. >>How to contact MSI.<<
Quote
S/N : 602-V277-38SB1403026567
BIOS VERSION: 015.042.000.000.003435
LINK for Bios: https://drive.google.com/file/d/0B45CDoCS72YAMms3Z09XMlFnWDA/edit?usp=sharing
It is the latest vbios already (TV277MH.350)
Try what raffi suggested.
Quote from: raffi on 07-June-14, 20:08:37
Got same problem, same card, same Bios version.
Try this :
https://forum-en.msi.com/index.php?topic=180812.msg1300696#msg1300696
For me actually working good. -
Vbios request r9 280x screen flicker problem
Hello,
I own a r9 280x video card and I'm having the screen flicker problem that others have as well. I would like to request a new vbios that would hopefully fix this problem.
S/N: 602-V277-26SB131010-XXXX
vbios info: http://w ww.sendspace.com/file/c7p75e
Thank you.reflash to this one
-
Radeon R9 280X 6GB - Occasional 2D flicker, no matter what I'm doing
Hey, so, as the title says, I have a Radeon R9 280X with 6GB of RAM. Just got it recently. When I got it, I started having a problem with a persistent 2d flicker that would happen while I was gaming or just on my desktop. It happened at random it seemed; some days I would go without seeing it, some days I would see it several times an hour. Thinking the card was defective, I filled out an RMA through Newegg and got a new one.
Lo and behold, same problem. I'm looking for any and all input you guys might have as to what my problem might be, because I have no idea where to start with troubleshooting this guy. I've tried the newest drivers/catalyst and beta drivers with the same results, and I haven't found any vBIOS updates through MSI Live 6.
tl;dr 2d flicker halp plz
Computer Specs:
AMD FX-8350 @4.0GHz
Gigabyte Motherboard, 990FXA-UD3
16GB DDR3, 1600MHz
DVD-RW Drive
120GB SSD
2TB HDD, 5400RPM
750w PSU
and the MSI Radeon R9 280x, 6GB.
Any input is appreciated!Quote from: Metamyth on 08-July-14, 06:15:31
Hey, so, as the title says, I have a Radeon R9 280X with 6GB of RAM. Just got it recently. When I got it, I started having a problem with a persistent 2d flicker that would happen while I was gaming or just on my desktop. It happened at random it seemed; some days I would go without seeing it, some days I would see it several times an hour. Thinking the card was defective, I filled out an RMA through Newegg and got a new one.
Lo and behold, same problem. I'm looking for any and all input you guys might have as to what my problem might be, because I have no idea where to start with troubleshooting this guy. I've tried the newest drivers/catalyst and beta drivers with the same results, and I haven't found any vBIOS updates through MSI Live 6.
tl;dr 2d flicker halp plz
Computer Specs:
AMD FX-8350 @4.0GHz
Gigabyte Motherboard, 990FXA-UD3
16GB DDR3, 1600MHz
DVD-RW Drive
120GB SSD
2TB HDD, 5400RPM
750w PSU
and the MSI Radeon R9 280x, 6GB.
Any input is appreciated!
My card does it too, and I always use ParkControl.exe on every PC build, so core parking is not happening on my PC. If I look in task manager or Process Lasso, all cores are active 100% of the time...still happens to me though. I hope this has nothing to do with the VRM issues that these cards are known for. I can't imagine anything in my case overheating because I have very large 120mm fans always blowing full blast on my card and 120mm fans taking are out of the case. It's always very cool in there. GPU temp never departs 56c in games. -
MSI R9 280X GAMING 6GB FLICKER/GRAPHIC corruption!!!
Hi
I understand this FLICKERING/GRAPHIC corruption is a normal problem whit MSI CARDS , and after searching on the internet i see this is a huge problem ,
is there any solution ???
MSI R9 280X GAMING 6GB
My s/n : 602-v277-31081405113596
I bought my Card in Denmark , the store (WEBHALLEN.COM) can't finde/locate the problem , sow now im stuck with this problen on my own
Please help
Regards
BrianHi Again
I have contacted the seller , really really poor service
So i decided to do some further TESTING , what i've noticed ...
When using only one monitor , all my problems seem to disappear , i've been testing sins last time i was here ,
my system been up 24/7 no problems whatsoever .
friday i start testing using 2 monitors again , to see if my problems returns ...
I really like to keep my MSI R9 280X GAMING 6GB
have a nice weekend -
|Request| R9 280X 3GB screen flicker, vbios update needed.
Getting weird screen flickering when on my desktop or watching movies. I heard a vbios update can help this.
My SN is: 602-v277-38sb1401100281
Thank you!
-I also tried the core unparking.Then try removing current driver in safemode using >>Driver Fusion<<. After reboot install latest driver: http://support.amd.com/en-us/download/desktop?os=Windows%208.1%20-%2064#amd-catalyst-packages
-
Hello is there a new version of bios for my MSI R9 280X,because i have very strange screen flickering.I returned the card to RMA but they returned it to me,because there was no problem with it.
MSI R9 280X Gaming LE
S/N : 602-V277-39SB1402030115
Thanks.Quote from: usmcpirman on 12-August-14, 10:15:37
I am giving everyone I find MY fix. Let me know if this post I put on another thread does it.
"I know this has been longer than 60 days. However I just wanted to post my fix for others in case its searched for. This has been so frustrating to figure out. My fix has been a variety of things such as clean installs of the drivers MANY MANY times. The final time I reinstalled the ATI's CCC driver 14.7 beta. I noticed that I unknowingly (by ignorance not action) installed MSI's version of CCC from there website as well. After (not) installing MSI's version on top it seemed to help but the clock speeds still fluctuated from 300MHZ- to the max 1020MHz continuously. After looking in the CCC I saw an option that caught my eye. "Alternate DVI Operational Mode" is checked by default on both screens options. So I unchecked it...applied changes.... VIOLA no more flicker and clock speeds have been stable for the past 5 hours. I however have not restarted my computer for fear it will return and I throw the computer out the window. This is atleast worth an attempt if you have the dreaded "Flicker" of the R9 280X.
For information my setup is as follows:
M/B- MSI A88X-G45 Gaming
processor: AMD A10-7850K (AMD A series black edition APU) w/ r7 200 series
2 (cheap @ around 120$ each) Monitors- Acer (G246HL) and LG (22M45) 60Hz running at 1920x 1080
PSU: (Cheap 35$) 600W
HDD: 1TB (Master) and 2TB (slave) seagate SATA drives
VIDEO: MSI R9 280x 3gb Video card
Issue noticed: Flicker when running either one or two (Extended screen) monitors usually while browsing, schoolwork, or watching netflix (2D actions???) and less but still during StarCraft 2 game play. tried just about every forums suggestions except the one about changing a register key profile.
Outcome of above suggestions: Relief....so far (6 hours later)"
"Alternate DVI Operational Mode"
where I can find that option ? -
I've purchased this card about a month ago from Newegg and it's been great so far. The only problem that i have is when navigating through windows. Maybe it's just from using my browser but I've notice the screen to flicker when i'm in the browser scrolling or watching videos. I have turned off hardware acceleration, used MSI drivers, beta drivers, and the latest drivers but this still happens from time to time. I don't think the card is an issue itself because i do not notice this when I'm in game. I believe the R9 280x 6GB that i have comes with the latest vbios already so i am not too sure if MSI currently has anything to remedy this issue. Apparently this has been an ongoing issue with R9 cards. So not sure if it is the R9 line of cards itself, the drivers provided by AMD, or the bios installed on the cards. RMA won't fix this issue as it is a widely known problem throughout all manufacturers of this line of cards.
ASUS Maximus VI Extreme
Bios Version 1402
Corsair AX1200i
MSI R9 280X GAMING 6GB
Intel Core i7-4770k
Samsung 840 Pro Series 256GB
Corsair H100i 77.0 CFM Liquid
Windows 8.1 64bit ProQuote from: h3n0g00d on 05-May-14, 10:53:04
I've purchased this card about a month ago from Newegg and it's been great so far. The only problem that i have is when navigating through windows. Maybe it's just from using my browser but I've notice the screen to flicker when i'm in the browser scrolling or watching videos. I have turned off hardware acceleration, used MSI drivers, beta drivers, and the latest drivers but this still happens from time to time. I don't think the card is an issue itself because i do not notice this when I'm in game. I believe the R9 280x 6GB that i have comes with the latest vbios already so i am not too sure if MSI currently has anything to remedy this issue. Apparently this has been an ongoing issue with R9 cards. So not sure if it is the R9 line of cards itself, the drivers provided by AMD, or the bios installed on the cards. RMA won't fix this issue as it is a widely known problem throughout all manufacturers of this line of cards.
ASUS Maximus VI Extreme
Bios Version 1402
Corsair AX1200i
MSI R9 280X GAMING 6GB
Intel Core i7-4770k
Samsung 840 Pro Series 256GB
Corsair H100i 77.0 CFM Liquid
Windows 8.1 64bit Pro
Yeah, I got the same issue. Windows 8.1Pro (64bit). Same card (6GB).
If I'm on the desktop and I leave a game running in the background and sometimes when using the browser displaying videos and/ or flash video ads, I get what looks like a screen shift. The picture flickers or jars upward/ downward. It reminds me of something you might have seen on an old CRT monitor when you hit the degauss button, but not quite as bad. It's like some kind of vertical screen refresh or something and looks like someone smacking your monitor from the top while you are using it. The only way I know how to fully re-produce it, at will, is by running my Unigine Valley benchmark in the background and then proceeding to do things on the desktop. It's definitely not heat related because my GPU temp can be at 33c or lower and still doing it. If I leave my Elder Scrolls Online game running in a background, depending on what's happening in the game, it can do it in this scenario too. -
Msi R9 280x Gaming 3Gb, texture flickering BF4
Hey people,
I got texture/screen flickering with my new MSI 280x Gaming 3Gb after playing the campaing in Battlefield 4 for around 20-40 min. I'm using the latest AMD 14.4 drivers. In Bf4 all graphics settings are on Ultra (vertical sync off).
I don't know if a rom could affect this weird behavior but here is my current rom: lalalalas://www.dropbox.com/s/48618erlvh4gvyy/Tahiti.rom (i am not allowed to post links.)
I recorded a short video with Fraps. This is the hidden link on Youtube: lalalaa
Temperature was around 71 when recording the video according to GPU-Z. I have read that these cards can go up to 85-90 degrees, so this shouldn't be a problem.
2014-05-01 15:58:44 , 1020.0 , 1500.0 , 71.0 , 100 , 2652 , 98 , 0 , 1822 , 1.200 ,
2014-05-01 15:58:54 , 1020.0 , 1500.0 , 71.0 , 100 , 2657 , 98 , 0 , 1821 , 1.200 ,
2014-05-01 15:59:04 , 1020.0 , 1500.0 , 71.0 , 100 , 2661 , 98 , 0 , 1821 , 1.200 ,
I have a Gigabyte EX58-UD5, Intel Core i7 920 (not overclocked), Corsair RM750, a few HD's and SSD, 12 GB Memory.Quote from: flobelix on 03-May-14, 01:44:28
Vbios is latest (TV277MH.350). Try disabling CPU core parking as some users reported that it solves such flicker issues:
http://bitsum.com/about_cpu_core_parking.php
Thanks for the suggestion. I already have some core parking function disabled in windows and in BIOS, because it could disturb any audio recording in my music software (no power saving, EIST, C1E, etc...). However, this software is new so i will try and test this out.
Is 79-80 degrees normal for this card while playing a game? This is with room temperature around 19, a Coolermaster CM690 iii with 2x 200mm fans, 2x 120mm fans. No cable cluttering and other heat sources are 4 Hd's, but there is plenty of airflow. The fan speed is sometimes keeping temp around 79 Degrees and other times the temperature goes up to even 87 while the fan speed is not even close at running a 100% (for example at 52%). -
2d Screen Flickering - MSI R9 280X TwinFrozr OC 3GB (R9 280X GAMING 3G)
Hello,
OS: Win 8.1 - 64bit
GFX: MSI R9 280X TwinFrozr OC 3GB (R9 280X GAMING 3G)
GPU-Z:
2d flickering, it seems, when it downclocks to 300Mhz, the screen starts flickering, and can't run games in 2d mode without flickering. The GFX is perfectly fine playing games in full screen.
Any ideas, folks?
I'm sure that changing the clock to 450Mhz default would fix this, or perhaps 500Mhz, but I don't know how I should do that, and maybe there is another fix for this.
Bios Attached as well: mega.co.nz/#!bt5XiSAa!6d07jJRFNM4lT3zWDAmyGnqTo-V4zsqZe4FW5LZEdz0
Thanks!I know this has been longer than 60 days. However I just wanted to post my fix for others in case its searched for. This has been so frustrating to figure out. My fix has been a variety of things such as clean installs of the drivers MANY MANY times. The final time I reinstalled the ATI's CCC driver 14.7 beta. I noticed that I unknowingly (by ignorance not action) installed MSI's version of CCC from there website as well. After (not) installing MSI's version on top it seemed to help but the clock speeds still fluctuated from 300MHZ- to the max 1020MHz continuously. After looking in the CCC I saw an option that caught my eye. "Alternate DVI Operational Mode" is checked by default on both screens options. So I unchecked it...applied changes.... VIOLA no more flicker and clock speeds have been stable for the past 5 hours. I however have not restarted my computer for fear it will return and I throw the computer out the window. This is atleast worth an attempt if you have the dreaded "Flicker" of the R9 280X.
For information my setup is as follows:
M/B- MSI A88X-G45 Gaming
processor: AMD A10-7850K (AMD A series black edition APU) w/ r7 200 series
2 (cheap @ around 120$ each) Monitors- Acer (G246HL) and LG (22M45) 60Hz running at 1920x 1080
PSU: (Cheap 35$) 600W
HDD: 1TB (Master) and 2TB (slave) seagate SATA drives
VIDEO: MSI R9 280x 3gb Video card
Issue noticed: Flicker when running either one or two (Extended screen) monitors usually while browsing, schoolwork, or watching netflix (2D actions???) and less but still during StarCraft 2 game play. tried just about every forums suggestions except the one about changing a register key profile.
Outcome of above suggestions: Relief....so far (6 hours later) -
Mid-2010 Macbook Pro Screen Flicker Pixel Seizure
Not sure how else to describe the problem, but I hope the title helps!
I have a mid-2010 15" MacBook Pro. I noticed in the last month or so, my screen would flicker. But not the entire screen. Just certain areas, like the pixels would jump/lag, as if it it would jump to the correct position. I don't know what's the word for it: glitter, pixel, flicker, seizure. I mean, that what it looks like. It actually hurts my eyes.
I don't know what could be the problem or if anyone knows what's going on. It's just certain pixels (random on the screen, but usually right in the middle) that get "stuck" and half a second later, jump. Not sure what the proper word is, but if anyone could identify it, that'll be great.
Safari, Chrome, and Word are the applications I use, and I've seen it all three programs. It's becoming a lot more noticeable and frequent now, especially if I switch programs or if I'm loading a new page.
The MBP is a tank, but I've been considering buying a new MacBook, preferably the Air, until this MBP kicks it, so if anyone has estimation on its shelf life, that'll be great (My 2005 Powerbook G4 barely made it through 4 years!). The warranty on the MBP just expired last year.
Thanks in advance, I appreciate any insight on the issue.Curiously, I don't have that option. It only gives me the option to disable Automatic graphics switching where it should give the better battery life or higher performance options. Do I have something disabled that gets rid of that option? It's the same under the Battery or Power Adapter options.
I'm going to take it to a genius but I'm wondering from reading other forums that maybe one of my RAM slots is bad. I want to have a play but will the genius know if I've opened it up and then possibly refuse it? If it is bad RAM then I can fix that myself without having to travel 70 miles to my nearest Apple Store. Is there a seal that I would break that would give away the fact that I've opened it up?
Thanks for the advice so far. -
Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor
I have a 24" iMac (fall 2007) and recently purchased a 26" Vizio (VMM26F10I) and connected it as a 2bd monitor for my iMac using the Mini-DVI to VGA adapter Apple sells.
The new monitor will flicker now and then and some times will go to no signal. I have to change resolutions to something else and then back to standard setting to get it to come back or unplug adapter and plug back in.
Is there a fix for this?26" VGA...? Which resolution/frequency? Have you tried a fresh cable with clean connectors, etc....
What did Vizio say when you contacted them with this question about your new purchase? -
Radeon 9600TX + Xorg 1.6.1.901: Disturbing Flicker
Hi! I try to setup a Radeon 9600 TX (R300 Chip) with Xorg 1.6.1.901 and xf86-video-ati. I want to use 2D + 3D acceleration. This is a new system setup using XFCE. (I intend to add compiz later.)
Acceleration for 3D is present + ok. Window resizing is rather choppy but acceptable. But I see a disturbing flicker when logged into X, as if waves were running down the screen horizontally. This is very inconvenient and hurts the eyes after a short time. Also the font in the VCs is not displayed in sharp edges but I do not know if this is interrelated (or erroneous).
I would like to keep the xorg.conf minimal. Since the DDC/EDID data that shows up in the log is correct, I did not add any ModeLines or mode setup. The log shows that xorg makes all decisions right (how it seems to me).
There are loads of posts about ati issues but I did not find anything that helped me solving my problem. Perhaps someone can help? Thanks in advance.
xorg.conf
# /etc/xorg.conf
# for Xorg 1.6.1
# For combination of C19-3 with Radeon 9600TX.
# This is a mere addition to the built-in configuration. This file only
# contains what cannot be autoconfigured or is to overwrite
# autoconfigured options.
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Monitor"
Identifier "FUS C19-3"
VendorName "FUS"
ModelName "C19-3"
Option "DPMS"
EndSection
Section "Device"
Identifier "Medion Radeon 9600 TX"
VendorName "ATI Technologies Inc"
BoardName "R300 NF [Radeon 9600 TX]"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "EXAVSync" "true"
Option "DRI" "true"
Option "EnablePageFlip" "true"
EndSection
Section "Screen"
Identifier "Configured Default Screen"
Device "Medion Radeon 9600 TX"
Monitor "FUS C19-3"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen "Configured Default Screen"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux gollum 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 14 11:51:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Configured Default Screen" (0)
(**) | |-->Monitor "FUS C19-3"
(**) | |-->Device "Medion Radeon 9600 TX"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc R300 NF [Radeon 9600 TX] rev 0, Mem @ 0xd8000000/134217728, 0xc7800000/65536, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) ATI Technologies Inc RV350 NF [Radeon 9600] (Secondary) rev 0, Mem @ 0xc8000000/134217728, 0xc7000000/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c7800000
(II) RADEON(0): MMIO registers at 0x00000000c7800000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Configured Default Screen" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "EnablePageFlip" "true"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(**) RADEON(0): Option "EXAVSync" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9600TX NF (AGP)" (ChipID = 0x4e46)
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 27000, sclk: 297.000000, mclk: 270.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=27000
(II) RADEON(0): Output VGA-1 using monitor section FUS C19-3
(II) RADEON(0): I2C bus "VGA-1" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: PAL
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-1
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT2: INTERNAL_DAC2
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-1:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-1:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-1 connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-1 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005dc000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e0000
(II) RADEON(0): Will use 6000 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 6000 kb for back buffer at offset 0x005e4000
(II) RADEON(0): Will use 6000 kb for depth buffer at offset 0x00bc0000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x0119c000
(II) RADEON(0): Will use 56720 kb for X Server offscreen at offset 0x0489c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x2560; Card 0x1002/0x4e46 0x1787/0x8486]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb7804000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7803000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf567000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xad8e7000
(II) RADEON(0): [drm] register handle = 0x28f00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xdfffd800 is: 0xdfffd800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe1ffe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): EXA VSync enabled
(II) RADEON(0): num quad-pipes is 2
(II) EXA(0): Offscreen pixmap area of 58081280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) RADEON(0): Acceleration enabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TVDAC
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(II) RADEON(0): Damage tracking initialized for page flipping
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Mouse M-BA47
(**) Logitech USB-PS/2 Mouse M-BA47: always reports core events
(**) Logitech USB-PS/2 Mouse M-BA47: Device: "/dev/input/event5"
(II) Logitech USB-PS/2 Mouse M-BA47: Found 4 mouse buttons
(II) Logitech USB-PS/2 Mouse M-BA47: Found x and y relative axes
(II) Logitech USB-PS/2 Mouse M-BA47: Found scroll wheel(s)
(II) Logitech USB-PS/2 Mouse M-BA47: Configuring as mouse
(**) Logitech USB-PS/2 Mouse M-BA47: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Mouse M-BA47: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Mouse M-BA47" (type: MOUSE)
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch_multikey"
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) AIGLX: Suspending AIGLX clients for VT switch
disable primary dac
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
Last edited by Tristero (2009-06-14 11:07:32)First I tried to force the monitor into 1280x1024@75 mode which does not show the flicker. In three horizontal areas in the screen, the display was very fuzzy. So I had to decide whether use 60Hz mode with the flicker problem or use 75 Hz mode with the fuzzyness problem.
I tried the first alternative by ignoring the EDID data and force the display mode but I didn't succeed with solving the fuzzyness problem. So I decided to go back to 60 Hz mode and try to solve the flicker problem. (I already tried 'Option "Flicker" "false" - no effect!) I have no more ideas.
Last edited by Tristero (2009-06-15 08:37:23) -
Hi everyone,
I just have my new Ipad4 last January 27, I noticed that while downloading a certain Apps in App Store then scrolling to look for more application, my screen would flicker like flashing or something blinking on it. I don't know what happened, why is it like that? Is it somewhat connected with hardware problem or does Ios 6 version still have a bug? I've tried using safari and other video downloader like vdownloader and I tried searching in youtube, still the same dilemma, it flicker also while browsing some video. Is it hardware problem? I already reset and restore my IPAD thou its a new one still the same dilemma happened again. What should I do? It was a gift for me and I'm really worried about it. Hope you could help me regarding it. Thank you so much.Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom
Maybe you are looking for
-
Hi, i am new to forum so excuse me if I'm in the wrong place. My iPad 4 has done the new 7.1 update and the battery life is only half what it was. I see lots are saying the phones have the problem but not so many talking about iPads. Mine is so bad t
-
Web Service Stateless Session request using JDeveloepr 11g (JAX-RPC)
I have been trying to consume web Service by sending Stateless Session request to the system. I generated the Java Proxy using JDeveloepr 11g, using JAX-RPC. As it is Stateless I need to add following SOAP Header for authentication <soap:Header> <wss
-
import javax.swing.JOptionPane; import javax.swing.JApplet; import java.awt.Graphics; public class Ex423 extends JApplet { int number; public void init() //read in size from the user String input = JOptionPane.showInputD
-
Pasting Pictures in Lync 2010 IM
Hi. We are migrating from Lotus Sametime 8 to Lync 2010 and one of the things that I cannot find out how to do is pasting a graphic (like a screenshot) during a IM session. Is this even an option? thanks
-
My computer froze during import
I had 250+ images to import. I made the stupid mistake of trying to load safari during the import, and saw that it was lagging. I walked away from the computer for about 20 minutes and came back to see that both programs had frozen. I made stupid mis