Radio button and selection screen
hi
my requirement is that if the user enters some particular combination of value in the select options and clicks a particular radio button there should be an error message displayed.
1) I am getting the error message in the form a dialog box , but it has only option of exit , and the user is thrown of the screen. my requirement is that after the error message the user must still be at the same screen so that he can enter new values.
2) the code that i have written also has one more anamoly that the displaying of error depends upon the sequence of actions .
if i enter the value in the select option first and then click the radio button then the error message is displayed which is correct.
but it doesnt work i click the radio button first and then enter the value, the program is executed and NO ERROR message is flashed.
here is what i have written
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_year for s021-spmon obligatory ,
p_kunag FOR vbrk-kunag ,
p_matnr FOR vbrp-matnr ,
p_augru FOR vbrp-augru_auft modif id a1 ,
p_vbeln FOR vbrk-vbeln .
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: nrw RADIOBUTTON GROUP g1 user-command check,
mwd RADIOBUTTON GROUP g1 ,
rws RADIOBUTTON GROUP g1 ,
edu RADIOBUTTON GROUP g1 ,
standard RADIOBUTTON GROUP g1 default 'X' .
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
at selection-screen output.
loop at screen.
if nrw = 'X' and p_augru-low EQ 'MWD'.
MESSAGE e000(oo) WITH '<Please Enter the correct Order Reason>'.
endif.
endloop.
START-OF-SELECTION.
CASE 'X'.
WHEN nrw.
PERFORM set_dates_nrw.
PERFORM load_data_nrw.
PERFORM get_cust_info_nrw.
PERFORM set_alv_field_cat_nrw.
PERFORM display_alv_nrw.
endcase.
Hi
Change this piece of code
at selection-screen output.
loop at screen.
if nrw = 'X' and p_augru-low EQ 'MWD'.
MESSAGE e000(oo) WITH '<Please Enter the correct Order Reason>'.
endif.
endloop.
by
<b>at selection-screen.
if nrw = 'X' and p_augru-low EQ 'MWD'.
MESSAGE e000(oo) WITH '<Please Enter the correct Order Reason>'.
endif.</b>
Reward points if useful.
Regards,
Atish
Similar Messages
-
Regarding radio button and selection screen
hi
i have a requirement to grey out one particular select option , if any one of 4 radio button is selected. (total 5 radio buttons ) .
how do i proceed .
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_year for s021-spmon obligatory,
p_kunag FOR vbrk-kunag ,
p_matnr FOR vbrp-matnr ,
p_augru FOR vbrp-augru_auft ,
p_vbeln FOR vbrk-vbeln .
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: nrw RADIOBUTTON GROUP g1 default 'X'user-command check,
mwd RADIOBUTTON GROUP g1user-command check,
rws RADIOBUTTON GROUP g1user-command check,
edu RADIOBUTTON GROUP g1user command check
standard RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
i know we need to use at-selection screen output.
but how do i set ONLY that particular select option , to no input.Hi ,
Use like This
User Dynamic Selection
at selection-screen output.
select single * from t000md.
loop at screen.
case screen-group1.
when 'REL'.
if not p_old is initial.
screen-input = '0'.
screen-required = '0'.
screen-invisible = '1'.
endif.
modify screen.
when 'BEL'.
if not p_new is initial.
screen-input = '0'.
screen-required = '0'.
screen-invisible = '1'.
endif.
modify screen.
when 'ARB'.
if p_new is initial.
screen-input = '0'.
screen-required = '0'.
screen-invisible = '1'.
endif.
modify screen.
when 'MTA'.
if p_new is initial.
screen-input = '0'.
screen-required = '0'.
screen-invisible = '1'.
endif.
modify screen.
endcase.
endloop.
Reward Points if it is useful
Thanks
Seshu -
Radio button in selection screen and push button
Hi experts,
I want to give radio button in selection screen side by side.
how we can do this on slection screen.
secondly i want to resize push button on selection screen.
please provide me the exact solution.
thanks
babbalHi babbal,
For Your Requriment yo can go to tcode se51 & then give ur program name & give screen number as 1000 because 1000 is default screen for all the programs and in se51 Press Layout button & then you can make changes to the Selection screen according to your requriment
Hope it will be Helpfull.......!!
Thanks & Regards,
Bhushan -
Radio button and select option in one line
Hi,
I have an requirement in which i need to display the radio button and select option in one line in an report program.
How can i do it?
Regards,
Arun.Hi,
Try this code.
TABLES: bkpf.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_r1 RADIOBUTTON GROUP a.
SELECTION-SCREEN COMMENT 4(20) text-001 FOR FIELD p_r1.
SELECTION-SCREEN COMMENT 30(12) text-002 FOR FIELD p_date.
SELECTION-SCREEN POSITION 39.
SELECT-OPTIONS: p_date FOR bkpf-budat OBLIGATORY.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_r2 RADIOBUTTON GROUP a.
text-001 = " Radio button"
text-002 = "Posting date" -
Radio Buttons on Selection Screen
Hi,
I have four radio buttons on selection screen in a frame, all belonging to the same group.
When the program is called using transaction 1, first two radio buttons are displayed. When the program is called using transaction 2, bottom two radio must be displayed.
I am doing this using the following code.
The problem is : When last two are displayed, there is empty space left on the top and first two are displayed there is empty space left in the bottom of the frame. How can this be taken care of such there are no empty spaces in the box frame?
Code:
Radio Buttons for Table Name
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-005.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_ot RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-001 FOR FIELD p_ot.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_exp RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-002 FOR FIELD p_exp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_cost RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-003 FOR FIELD p_cost.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_att RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-004 FOR FIELD p_att.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK bl1.
Initialization
INITIALIZATION.
Display Table Names depending on transaction calling the program
PERFORM display_table_names.
FORM display_table_names.
DATA : l_mod_id(3) TYPE c.
IF sy-tcode EQ 'ZVTEST1'.
l_mod_id = 'ONE'.
ELSEIF sy-tcode EQ 'ZVTEST2'.
l_mod_id = 'TWO'.
ENDIF.
LOOP AT SCREEN.
IF screen-group1 EQ l_mod_id.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDFORM. " display_table_namesHi,
REPORT Z_SALES MESSAGE-ID ZZ .
* Variables *
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: V_FILE TYPE STRING.
* Internal Tables *
DATA: BEGIN OF IT_SALES OCCURS 0,
AUART,
VKORG,
VTWEG,
BSTKD,
KUNNR_KUNAG,
KUNNR_KUNWE,
KETDAT,
KPRGBZ,
PRSDT,
BSTKD_1,
KUNNR_KUNAG1,
KUNNR_KUNWE1,
KETDAT_1,
KPRGBZ_1,
PRSDT_1,
ZTERM_1,
INCO1,
INCO2,
MABNR,
KWMENG,
BSTKD_2,
KUNNR_KUNAG2,
KUNNR_KUNWE2,
KETDAT_2,
KPRGBZ_2,
PRSDT_2,
ZTERM_2,
INCO1_1,
INCO2_2,
KSCHL,
KBETR,
END OF IT_SALES.
* Selection-Screen *
*Selection Screen 1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE(25) TYPE C,
O_FILE(25) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
*Selection Screen 2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: CAL_TRA RADIOBUTTON GROUP G1 USER-COMMAND FLAG,
SESSION RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
*Selection Screen 3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-003.
PARAMETERS: MODE DEFAULT 'X' MODIF ID BL1,
UPDATE DEFAULT 'X' MODIF ID BL1.
SELECTION-SCREEN END OF BLOCK B3.
*Selection Screen 4
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-003.
PARAMETERS: SES_NAM(25) MODIF ID BL2,
KEP_TRAS TYPE C DEFAULT 'X' MODIF ID BL2,
LOC_DATE TYPE SY-DATUM MODIF ID BL2,
USER TYPE SY-UNAME DEFAULT SY-UNAME MODIF ID BL2.
SELECTION-SCREEN END OF BLOCK B4.
* At Selection-Screen Output *
AT SELECTION-SCREEN OUTPUT.
IF CAL_TRA = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '1'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
IF SESSION = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BL1'.
SCREEN-ACTIVE = '0'.
ENDIF.
IF SCREEN-GROUP1 = 'BL2'.
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
* At Selection-Screen *
AT SELECTION-SCREEN.
PERFORM VALIDATE_MANDATORY_FIELDS.
***************** INITIALIZATION ********************
INITIALIZATION.
LOC_DATE = SY-DATUM - 1.
* Start of Selection *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
TABLES
DATA_TAB = IT_SALES
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form VALIDATE_MANDATORY_FIELDS
* text
FORM VALIDATE_MANDATORY_FIELDS.
IF P_FILE IS INITIAL OR O_FILE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE FILE NAMES'.
ENDIF.
IF CAL_TRA = 'X'.
IF MODE IS INITIAL OR UPDATE IS INITIAL.
MESSAGE E000 WITH 'ENTER BOTH THE OPTIONS'.
ENDIF.
IF SY-SUBRC <> 0.
IF MODE <> 'A' OR MODE <> 'E' OR MODE <> 'N'
OR MODE <> 'a' OR MODE <> 'e' OR MODE <> 'n'.
MESSAGE E000 WITH 'Mode should be either A, E or N'.
ENDIF.
IF UPDATE <> 'S' OR UPDATE <> 'A'
OR UPDATE <> 's' OR UPDATE <> 'a'.
MESSAGE E000 WITH 'Mode should be either S or A'.
ENDIF.
ENDIF.
ENDIF.
IF SESSION = 'x'.
IF SES_NAM IS INITIAL
OR KEP_TRAS IS INITIAL
OR LOC_DATE IS INITIAL
OR USER IS INITIAL.
MESSAGE E000 WITH 'ENTER ALL THE FIELDS'.
ENDIF.
ENDIF.
ENDFORM. "VALIDATE_MANDATORY_FIELDS
Regards
vijay -
Radio button on selection screen event issue.
Hi all,
I have two radio buttons and two input mandatory fields on selection screen.
- If first radio button selected then some value 'ABC' should fill in second input field.(because it is a mandatory field)
- If second radio button selected then some value 'XYZ' should fill in first input field..(because it is a mandatory field)
If suppose, user deletes first input value (ABC) and selects second Radio then, ABC to automatically display on first input field as this is mandatory. Same like,If he deletes second input field value and selects first radio, it should display XYZ in second input field. (As these fields are mandatory and requires some value).
I tried with below code, but not working. Appreciate your quick response.
PARAMETER ppart RADIOBUTTON GROUP src DEFAULT 'X'.
SELECT-OPTIONS p_sndprn FOR edoc_stat-sndprn OBLIGATORY DEFAULT 'ABC'.
PARAMETER psndr RADIOBUTTON GROUP src.
SELECT-OPTIONS p_sendid FOR zabc-sndlad OBLIGATORY DEFAULT 'XYZ'.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP src.
IF SSCRFIELDS-UCOMM = 'PRGP'.
IF ppart EQ 'X'.
P_SENDID-LOW = 'XYZ'.
ELSE.
P_SNDPRN-LOW = 'ABC'.
ENDIF.
ENDIF.
Thanks,
Ranjith.Search the forum... don't make fields obligatory and use event AT SELECTION-SCREEN OUTPUT.
-
Problem with Radio Buttons: At Selection-Screen
Hi,
i have two radio-buttons in my screen with coding
PARAMETERS:
ST RADIOBUTTON GROUP rad1 DEFAULT 'X', "stock transport
PR RADIOBUTTON GROUP rad1. "purchase return
at selection-screen output.
if PR = 'X'.
perform f_selection_request_po_ret.
endif.
if ST = 'X'.
perform f_selection_request_stck_trans.
endif.
at selection-screen on value-request for s_ebeln-low.
perform f_f4_values.
at selection-screen on value-request for s_ebeln-high.
perform f_f4_values.
I need to provide different values in drop-down of select-options according to the radio-button selected.
Like if PR is selected s_ebeln-low and s_ebeln-high displayed will be different.
and if ST is selected s_ebeln-low and s_ebeln-high displayed will be different.
My problem is that the program is taking the values of that radio button which is set to Default. While running the program, if I click on the other radio-button, it is showing the same values, not different.
Kindly, tell me where I am going wrong in the coding.
Regards,
Priyanka.Hi,
For this requirement you have to use the following FM's
<b>DYNP_VALUES_READ </b> and DYNP_VALUES_UPDATE
The one highlighted is the one you need to call in the selection screen events to get the values. Do a where used list on this FM and see how its being used.
DATA : W_REPID LIKE D020S-PROG,
W_DYNNR LIKE D020S-DNUM,
I_DYNPREAD LIKE DYNPREAD OCCURS 0 WITH HEADER LINE.
REFRESH: I_DYNPREAD.
CLEAR : I_DYNPREAD,
W_FILE .
I_DYNPREAD-FIELDNAME = C_UXPATH.
APPEND I_DYNPREAD.
CLEAR : I_DYNPREAD.
W_REPID = SY-REPID.
W_DYNNR = C_1000.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = W_REPID
DYNUMB = W_DYNNR
TABLES
DYNPFIELDS = I_DYNPREAD
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
Successfully read screen. GET the values
LOOP AT I_DYNPREAD.
CASE I_DYNPREAD-FIELDNAME.
WHEN C_UXPATH .
W_FILE = I_DYNPREAD-FIELDVALUE.
ENDCASE.
ENDLOOP. "LOOP AT i_dynpread.
ENDIF. "IF sy-subrc EQ 0.
Cheers
VJ
Message was edited by:
Vijayendra Rao -
Regarding Radio button in selection screen?
Hi experts,
In my selection screen I am having two radio buttons.
By default I am selecting the first radiobutton and displaying a selection block correspoding to that below.
If I am selecting second radio button I want to display another selection block regarding to that second radio button.
At that time first selection block should be hidden or should be disabled.
Please help me out with sample codings.
Thanks,
Sakthi.Hi ,
Try like this..
TABLES : mara.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE select.
PARAMETERS : p1 RADIOBUTTON GROUP rado USER-COMMAND hi DEFAULT 'X',
p2 RADIOBUTTON GROUP rado.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 .
SELECT-OPTIONS : s_hello FOR mara-matnr MODIF ID m1,
s_hi FOR mara-mtart NO-EXTENSION NO INTERVALS MODIF ID m2.
SELECTION-SCREEN END OF BLOCK b2 .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CASE screen-group1.
WHEN 'M1'.
IF p1 = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
WHEN 'M2'.
IF p2 = 'X'.
screen-active = 1.
ELSE.
screen-active = 0.
ENDIF.
ENDCASE.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON s_hi.
CHECK sy-ucomm NE 'HI'.
START-OF-SELECTION.
IF p1 = 'X'.
WRITE 'hi'.
ENDIF.
cheers,
Sai -
Radio button in selection screen
hi,
i have an ALV Report, in the selection screen there are 2 radio buttons.
RB1 default 'X'.
and
RB2
and there are 5 select-options.
the issue is , the radio button RB1 IS default when RB1 is there one of the select option should be disabled.
and when we click on RB2 the select option should be enabled.
the selec option is
select - option : s_bukrs for bseg-bukrs.
please help with the code.
thanks in advanceHi,
Try this code,
TABLES : KNA1,EKKO.
PARAMETERS : C1 RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
C2 RADIOBUTTON GROUP VIJJ .
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF C1 = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF C2 = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
Regards,
Vijay -
How to handle Event when a radio button in selection screen is clicked
Hi all,
What is the Event generated when a radio button is clicked in the selection Screen. My requirement is .If one radio button is clicked a field in selection screen should be greyed.
Here I used AT SELECTION-SCREEN OUTPUT. but this event is generated only if i press 'ENTER' after clicking the radio button in the selection screen.
Is there any other way to process this radio button event?
Thanks&Best Regards,
Vishnuhi,
try like this
TABLES : kna1,lfa1.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but1 RADIOBUTTON GROUP one DEFAULT 'X' USER-COMMAND ucom.
SELECTION-SCREEN COMMENT 3(26) text-003.
SELECT-OPTIONS : kunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : rad_but2 RADIOBUTTON GROUP one .
SELECTION-SCREEN COMMENT 3(26) text-004.
SELECT-OPTIONS : lifnr FOR lfa1-lifnr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN:END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF rad_but1 = 'X'.
IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH' .
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
screen-input = '0'.
REFRESH lifnr.
MODIFY SCREEN.
ENDIF.
ENDIF.
IF rad_but2 = 'X'.
IF screen-name = 'KUNNR-LOW' OR screen-name = 'KUNNR-HIGH'.
REFRESH kunnr.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'LIFNR-LOW' OR screen-name = 'LIFNR-HIGH'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
reward if usefull.... -
HR-ABAP: Defaulting Radio Button on Selection Screen of PNP LDB
Hi all,
I am using PNP LDB (Logical Database) for program which is used for Payroll Results.
Now I have a requirement wherein it is necessary to select 'Up to today' as default on the selection screen.
We are having 4.7C version of SAP. I tried following code in INITIALIZATION event:
Initializing Selection Screen Data Selection Option to 'Up To Today'
INITIALIZATION:
MOVE: 'X' TO pnptimr4, " This is the option which I want as Default selection.
space TO pnptimr1,
space TO pnptimr2,
space TO pnptimr3,
space TO pnptimr5,
space TO pnptimr6.
But still I dont see this Radiobutton getting selected as Default selection while running the program.
By Default it selects Option : 'Other Period' (pnptimr6).
Any Idea how to resolve this ??
Regards,
Avinashhi...
When the INITIALIZATION event occurs, you can set default values for the selection screen.
The fields for the data selection are defined in structure QPPNP.
Possible values for field PNPTIMED are:
D = Today (key date)
M = Current month
Y = Current year
P = To current date
F = From today (from current date)
The person selection fields are defined in include program DBPNPSEL. They are internal tables that must be filled using APPEND.
so in intialization you have to write code as
PNPTIMED : P.
so up date will be defaulted in selection screen.
award points if helpful. -
Restriction on length of the name given to a radio button in selection scr
Hi,
Is there any length restriction for the name given to a radio button in SELECTION SCREEN?
I need to display a 35 char name for a radio button.It can be upto 8 characters long. But here is a solution to your problem:
selection-screen begin of line.
parameters: rb_opt1 radiobutton group mygrp.
selection-screen comment 5(35) text-s01 for field rb_opt1.
selection-screen end of line.
selection-screen begin of line.
parameters: rb_opt2 radiobutton group mygrp.
selection-screen comment 5(35) text-s02 for field rb_opt2.
selection-screen end of line.
and then just double click on the text objects to write your own texts.
Hope it helps. -
Please help! How can I validate Radio Buttons and List Menu with PHP.
Hello everyone, I have been learning PHP step by step and
making little projects.
The point is I find it easy to learn by doing "practical
projects."
I have been reading the David Powers's Book on PHP Solutions
and it's really great, however there is nothing mentioned regarding
Validating Radio buttons. I know the book cannot cover every aspect
of PHP and maybe someone in here can help.
I have been learning how to process HTML forms with PHP.
The problem is every book or tutorial I have read or
encountered fall short on validation.
I'm wondering how I can learn to validate Radio Buttons and
Select List Menu.
I have managed to create validation for all other fields but
have no clue as to how I can get validation for Radio Buttons and
List Menu.
I would also like an error message echoed when the user does
not click a button or make a selection and try to submit the form.
I would appreciate any help.
PatrickIt's not that default value is "None." In fact it's not. It
will only be
"none" when the form is submitted.
Also if your submit button is names 'send' then
$_POST['send'] will only be
set if the form was submitted.
Make sure you didn't hit the refresh button on your browser
which usually
reposts the information. Also make sure you did not reach the
form from
another form with the same button names.
Otherwise paste the snippet.
Also you can check what fields are set in the post array by
adding this to
the top of (or anywhere on) your page:
print_r($_POST);
Cosmo
"Webethics" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> Off the top of my head this should be no different than
your radio buttons
> except that 'productSelection' will always fail the
!isset check when the
> form is submitted since the default value is "None", and
therefore always
> set. :-)
>
> So how about this..?
> <?php
> if (isset($_POST['send']) and
($_POST['productSelection'] == "None"))
> {echo "Please select a product.";}
> ?>
>
>
>
>
> "Webethics" <[email protected]> wrote
in message
> news:[email protected]...
> > Another question - how do i applied the code you
just showed me to
> > select
> > menu
> > or select list?
> >
> > This is the list:
> >
> > <div class="problemProduct">
> > <label for="productSelection"><span
class="product_label">Product
> > Name.</span></label>
> > <select name="productSelection" id="products"
class="selection">
> > <option value="None">-------------Select a
product----------</option>
> > <option value="Everex DVD Burner">Everex DVD
Burner</option>
> > <option value="Vidia DVD Burner">Vidia DVD
Burner</option>
> > <option value="Excerion Super Drive">Excerion
Super Drive</option>
> > <option value="Maxille Optical Multi
Burner">Maxille Optical Multi
> > Burner</option>
> > <option value="Pavilion HD Drives">Pavilion
HD Drives</option>
> > </select>
> > </div>
> >
> > I thought I could just change the name is the code
from operatingSystem
> > to
> > productSelection.
> >
> > Something like this:
> >
> > From this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['operatingSystem']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > To this:
> >
> > <?php
> > if (isset($_POST[send]) and
!isset($_POST['productSelection']))
> > {echo "Please select an operating system.";}
> > ?>
> >
> > But this does not work, any ideas?
> >
> > Patrick
> >
>
>
>
>
> Hey, I tried this about but as you mentioned, since the
default product
> value
> is "None" an error message appears when the page loads.
>
> Is there a way to code this things so that even though
the default value
> is
> "None" there ia no error message untle you hit the
submit?
>
> When I applied the code, it messes up the previous code,
now the operating
> system is requiring an entry on page load.
>
> When I remove the code from the list menu everything
goes back to normal.
>
> I know this is a little much but I have no other
alternatives.
>
> Patrick
> -
Radio buttons and Checkboxes to change appearance when selected
Hi guys!
Help needed.
I want my check boxes and radio buttons when selected to change color from black to "0,64,128", size from 12 to 14 and to become bold.
Also the default appearance for checkboxes is cross, but I need it to be a check mark.
I would be so much thankful if you could give me some advice.
THANK YOU!
MariaHi Bibhu,
Thanks for quick response!
For check mark -- thanks! How could I not see that option!
For radio button -- it's not working.
I found this helpful tips on changing appearance of the radio buttons and check boxes. http://www.assuredynamics.com/wp-content/uploads/2010/11/Assure-Dynamics-Checkboxes-and-Ra dio-Buttons-Rev-1.pdf
I used the first script, but I got an error message. I can't understand what I am doing wrong. It says: "Syntax error near token "{" on line 2, column 1.
I am confused.
Help appreciated. -
Selection screen modification based on various buttons in selection screen
Hi,
I have 1 query related with Selection screen modification.
In my Report Program,I have created GUI Status for my selection screen
Now 2 buttons in application toolbar are coming on selection sceen.
For this i used,'At selection screen output' event.
And there are 2 blocks on selection screen.
If user press button1 then block2 should not display.
and if user press button2 then block1 should not display.
but the problem is i m not getting reqd result and also while doing debugging its not showing me sy-ucomm value.
Any pointers on this.
Thanks,
MamtaHi Mamta,
have it in a group then you can write code accordingly see sample example,
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r1 RADIOBUTTON GROUP rad
USER-COMMAND clk DEFAULT 'X'. " upload Radio Button
SELECTION-SCREEN COMMENT 5(35) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 001 WITH FRAME TITLE text-001.
PARAMETERS: p_upl LIKE rlgrap-filename MODIF ID a "Upload File
DEFAULT 'c:\temp\parbmat.xls',
p_werks like t001w-werks MODIF ID a, "Plant
PARAMETERS: p_rest LIKE rlgrap-filename MODIF ID a "Dwonload File Path
DEFAULT 'c:\temp\Success.xls'.
SELECTION-SCREEN : END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r2 RADIOBUTTON GROUP rad.
SELECTION-SCREEN COMMENT 5(35) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 002 WITH FRAME TITLE text-002.
PARAMETERS : p_plant LIKE marc-werks MODIF ID b. "Plant
PARAMETERS : p_lgort LIKE mard-lgort MODIF ID b. "Storage Location
PARAMETERS : p_vkorg LIKE mvke-vkorg MODIF ID b. "Sales Organization
PARAMETERS : p_vtweg LIKE mvke-vtweg MODIF ID b. "Distribution Channel
SELECT-OPTIONS : s_mat FOR mara-matnr MODIF ID b. "Material No No
SELECT-OPTIONS : s_dat FOR mara-ersda MODIF ID b. "Date on Record Created
PARAMETERS : p_down LIKE rlgrap-filename MODIF ID b
DEFAULT 'c:\temp\Material Master.xls'. "Download File Path
SELECTION-SCREEN : END OF BLOCK 002.
AT SELECTION-SCREEN OUTPUT.
*Inactive Fields depending on the radio button
LOOP AT SCREEN.
IF p_r1 = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_r2 = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Maybe you are looking for
-
Shape group disappears when I make it a 3D layer ...
So, a strange thing is happening. I've got a corporate logo that was sent to me as an Illustrator file. I dropped it into AE, and selected "Create Shapes from Vector Layer." So far, so good. The instant I click to make it a 3D layer (Ray-traced),
-
Bootcamp update 3.1 and 3.2 will not install please help
I am running windows 7 32 bit on a silver mac book pro. it wants me to update my boot camp version from 3.0 to 3.1 but when i go to download it, it comes up with a progress box but then after a while it gives me an error basically stating that if thi
-
Comment out actions in side proxy services in osb
Do any body know how to comment out certain actions in proxy service in OSB? For eg: I have assign, insert, assign, ..route.... I want to comment out second assign but don't want to delete it, since i might need it later. Can I manipulate the generat
-
After getting a prompt on screen stating there was a new version of firefox available I clicked and downloaded. I think it is awful and either want to revert back to the old version or will try another provider. Can anyone help me get the older versi
-
Hiding elements in flexible performance management
Dear Experts, We're on EHP4 and using Flexible performance management. I would like to hide certain elements based on the sub-status of the appraisal document. Currently, I am able to hide the columns associated with these elements by modifying the