RAL question

Gurus,
I have a question on RAL configuration/setup (appl.comp BC-SEC-RAL) on NW74 SPS5 release.
I am trying to configuring recording (dynpro channel) and eventually create a configuration based on the recording.
I am running GUI 7.30 to start the tcode I am trying to record fields from. I can see the 'Record Field' option from the context menu. I am marking some fields for recording on the abap dynpro application.
After I am done with it, I come back to the 'create recording screen' on the 'Administration' tab and stop the recording. When I open it for contents, it is empty. And it seems that you can only create a new Configuration by using an existing recording/program-name.
If you are successful at it, would you please hint at what am I missing.
Thanks,
Pawan.

Hi Patrick,
Thank you for the response.
I am able to get the recording and setup configuration with log group/context and eventually view the logged records if I choose the 'webdynpro' channel.
It does not work for the 'dynpro' channel though. I start the dynpro recording
and switch over the tcode SU01 and when I ctrl+right-click, the context menu shows up with the 'Record Field' option and I choose it:
I close the application and go back to the recording and it is empty
I am guessing because the recording is empty, it does not let me create configuration in the next step.
Regaqds,
Pawan.

Similar Messages

Creative Cloud, questions générales

Bonjour,
Je suis nouveau dans le monde Adobe et j'ai quelques questions d'ordre général sur les logiciels Adobe:
Notre besoin principal est de travailler avec InDesign en collaboration avec notre agence qui jusqu'alors gérait seule nos documents PAO avec InDesign. Nous nous orientons donc vers l'acquisition de Creative Cloud (car nos besoins pourraient s'étendre vers d'autres logiciels que InDesign).
Première question: si notre agence et nous-mêmes utilisons Creative Cloud, pouvons nous partager un espace de stockage commun ou ces espaces de stockage sont-ils liés à l'abonnement et donc dictincts si nous acquérons deux abonnements? (deux espaces distincts enlèveraient à mon sens tout intérêt à travailler sur le Cloud)
Deuxième question: corolaire à la première question, notre agence et nous-même pouvons-nous utiliser un seul et même abonnement Creative Cloud de façon à n'utiliser qu'un espace de stockage? Autrement dit, si nous-même ou notre agence acquérons un seul abonnement Creative Cloud, pouvons nous donner l'accès (et combien d'accès) à une autre entreprise?
Merci de vos tuyaux et de vos retours d'expériences.

Bonjour. d'apres la FAQ, http://www.adobe.com/fr/products/creativecloud/faq.edu.html#
>Les abonnés à une même formule Creative Cloud doivent-ils travailler dans la même entreprise ?
Non, l'adhésion à Creative Cloud peut être étendue à tout possesseur d'une adresse e-mail. Il est important de noter qu'une invitation d'abonnement à Creative Cloud ne peut être acceptée que par le destinataire (adresse e-mail) de cette invitation.
>À quelle capacité de stockage en mode cloud me donne droit mon abonnement à Creative Cloud ?
Avec un abonnement équipe, chaque personne a droit à 100 Go de stockage pour visualiser, modifier, stocker et partager des fichiers entre les différents membres. Avec un abonnement individuel, la capacité de stockage est limitée à 20 Go par utilisateur.
En espérant que cela vous éclaire, mais je vous conseillerais de contacter Adobe directement: http://www.adobe.com/fr/aboutadobe/contact.html

Business Catalyst Technical Questions?

Hello All,
I will be working with Business Catalyst soon because of its integration with other adobe programs. However before I move on I do have a few questions that I could not find an answers on.
How many products/ rows can the catalog feature handle? - for sake of conversation lets say I have 2000 products, will the catalog be able to handle that or is there a limit?
Lets say I want to have an auction on a website, is that possible through business catalyst?
Since I have a hosting plan with godaddy I have to change the nameserver so that the site can us BC features. However I have several emails set up already, will I be able to keep using those regularly?
Over at the webCommerce pricing, there are options for number of users. If I were to pick 3 users does that mean I can only build 3 websites with this plan, or I can only have 3 custom emails for one website?
If I have 5 websites with ecommerce, do I basically need a separate webCommerce account for all of them?
With BC will I be able to build a searchable table similar to this?: http://www.conciergerealty.com/sale-search/?field_resort_tid=&title=&field_region_tid=Cent ral+America&field_season_tid=&field_vista_type_tid=&field_points_value=&field_sales_price_ value=&field_sales_price_value_1=
thanks for the help

Hi,
How many products/ rows can the catalog feature handle? - for sake of conversation lets say I have 2000 products, will the catalog be able to handle that or is there a limit?
No limit on products or catalogs. Rendering these on a site you can set the paginated limit of these and the top end per page load is about 500.
Lets say I want to have an auction on a website, is that possible through business catalyst?
Yes, but not as you really want it, it does not really support such features, you could fudge something but this is best for software designed for this purpose.
Since I have a hosting plan with godaddy I have to change the nameserver so that the site can us BC features. However I have several emails set up already, will I be able to keep using those regularly?
Over at the webCommerce pricing, there are options for number of users. If I were to pick 3 users does that mean I can only build 3 websites with this plan, or I can only have 3 custom emails for one website?
You would just change the A-record at godaddy to point only the web traffic to BC.
If I have 5 websites with ecommerce, do I basically need a separate webCommerce account for all of them?
Yes
With BC will I be able to build a searchable table similar to this?: http://www.conciergerealty.com/sale-search/?field_resort_tid=&title=&field_region_tid=Cent ral+America&field_season_tid=&field_vista_type_tid=&field_points_value=&field_sales_price_ value=&field_sales_price_value_1=
Not 100% out of the box, you would need to do custom scripting. But it is possible

Comment changer les question de securiter de mon compte apple quand jai perdu les reponce au question

je suis deja aller sur le site appleid.apple.com sur changer password et question de securiter mais il est pas ecrit envoyer un email pour reset les question de secruriter

Le problème est que vos références de carte de crédit ou de débit doivent être associées à un même pays où vous résidez.
"Bien que vous pouvez parcourir l'iTunes Store dans n'importe quel pays sans être connecté, vous pouvez seulement acheter du contenu sur l'iTunes Store de votrepropre pays. Ceci est renforcé par l'adresse de facturation associée à votre carte de crédit ou autre méthode de paiement que vous utilisez avec l'iTunes Store, plutôt que votre localisation géographique réelle.Vous pouvez utiliser l'iTunes Store dans tous les paysdont vous êtes un résident, mais vous aurez besoin soit d'un compte séparé magasin iTunes pour chacun d'eux, ou vous aurez besoin d'être continuellementcommutation des informations de facturation sur votrecompte unique. Généralement, il est plus simple à mettre en place un autre compte de ces situations, même si ellene vaut rien que des fonctionnalités telles que iTunes dans le nuage et match iTunes sont conçues pour fonctionner au mieux lorsque vous utilisez un compteseul magasin iTunes, car vous ne pouvez changer de compte avec ces services de tous les 90 jours."
A partir d'ici > The Complete Guide to Using the iTunes Store | iLounge Article

Question fonctionnement logiciel labview , pour TPE lycée, Urgent SVP

Bonjour,
Nous sommes élèves d'un lycée et nous travaillons, dans le cadre d'un TPE sur la détection des exoplanètes par la méthode de transits: une variation de la courbe de la lumière d'une étoile prouverait l'existence d'une exoplanète en rotation autour de celle ci.
notre problème:
Nous avons reussi avec le logiciel Labview à faire une acquisition des données de notre expérience, et nous souhaitons afficher en temps réel la courbe de cette acquisition. Cependant, le logiciel nous affiche les données seulement en temps réel, il nous montre la variation de la lumière, sur l'instant, et nous aimerions pouvoir voir la courbe de cette lumière sur plusieurs secondes ( 10 ou 20 s). Il nous faudrait donc que le logiciel enregistre les données précédentes dans le temps et nous ne trouvons pas le moyen de le faire, surtout que nous ne comprenons que très peu l'anglais.
Je vous met en pièce jointe le document labview que nous avons tenter de réaliser pour pouvoir afficher une courbe de la lumière dans le temps.
et une image exposant notre problème.
J'espere vraiment que vous pourrez répondre à ce message et nous aider, nous sommes bloqués à cette étape pour le reste du TPE, et le professeur ne sait, lui aussi, résoudre ce problème.
Merci d'avance
TL - lycée jean monnet
Attachments:
TPE_exoplanete.vi ‏81 KB
TPE acquisition labview2.JPG ‏18 KB

Alors... je ne sais pas ce que vous avez comme matériel d'acquisition, mais selon la configuration du VI express la fréquence d'acquisition (Rate) est de 1000 Hz et les acquisitions se font par bloc de 1000 points (Samples to read).
Donc lorsque votre programme s'exécute, tant que vous ne cliquez pas sur "Stop", chaque seconde vous récupérez un bloc de 1000 points correspondant à une seconde de signal et vous affichez ces 1000 points dans un graph. Donc en effet vous n'avez pas l'historique, vous ne voyez que la seconde écoulée de signal.
Pour avoir un historique, le plus simple est de remplacer le Graph (Waveform Graph) par un Chart (Waveform Chart). D'une éxécution de boucle à l'autre le chart va conserver les données ou "les ajouter à la suite bloc par bloc".
La longueur de l'historique par défaut du chart est de 1024 échantillons, vous pouvez modifier cette taille en faisant un clic droit sur le chart, puis "chart history length" (littéralement : longueur de l'historique du chart), mettez 20000 (20 sec * 1000 Hz)et vous pourrez ainsi visualiser 20 secondes de signal.
Pour ce qui est de l'enregistrement des données vous pouvez utiliser un VI express qui s'appelle "Write to measurement file", de la même manière que pour le DAQ Assistant vous pourrez le configurer afin d'avoir le type de fichier que vous souhaitez.
Je suppose que le TPE doit être une occasion pour vous de mettre les mains dans le camboui donc je vous souhaite bon courage, si vous avez plus de question n'hésitez pas.
PS : une très bonne source d'inspiration pour les débutants : Help >> Find example... >> onglet "search" et faite une recherche avec "graph".
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Questions on Print Quote report

Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC

1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash

Satellite P300D-10v - Question about warranty

HI EVERYBODY
I have these overheating problems with my laptop Satellite P300D-10v.
I did everything I could do to fix it without any success..
I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
BUT unfortunately the problem still exists...
So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
Well i guess this is a Toshiba bug for many years now.
Its a really nice lap, cool sound (the best in laptop ever) BUT......
So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
If any body knows PLS let me know.
chears
Thanks in advance

Hi
I have already found you other threads.
Regarding the warranty question;
If there is something wrong with the hardware then the ASP in your country should be able to help you.
The warranty should cover every reparation or replacement.
But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
Greets

Question regarding NULL and forms

Hi all, i have a survey that im working on that will be sent via email.
I'm having an issue though. if i have a multiple choice question, and the user only selects one of the choices, all the unselected choices return as NULL. is there a way i can filter out anytihng that says "NULL" so it only shows the selected options?
thanks.
here is the page that retrieves all the data. thanks
<body>
1) Is this your first visit to xxxxxxx? <%=request.getParameter("stepone") %>

 
2) How did You Learn About xxxxxxx?
<%=request.getParameter("steptwoOne") %>
 
 <%=request.getParameter("steptwoTwo") %>
 
 <%=request.getParameter("steptwoThree") %>
 
 <%=request.getParameter("steptwoFour") %>
 
 <%=request.getParameter("steptwoOther") %>

 
3) What was your main reason for visiting xxxxx?
<%=request.getParameter("stepthreeOne") %>
 
 <%=request.getParameter("stepthreeTwo") %>
 
 <%=request.getParameter("stepthreeThree") %>
 
 <%=request.getParameter("stepthreeFour") %>
 
 <%=request.getParameter("stepthreeOther") %>

4) did you find the information you were looking for on this site?
<%=request.getParameter("stepfour") %>
 
<%=request.getParameter("stepfourOther") %>

5) Do you plan on using this website in the future?
<%=request.getParameter("stepfive") %>
6) What is your gender
<%=request.getParameter("stepsix") %>
7) What is your age group
<%=request.getParameter("stepseven") %>
8) Would you like to take a moment and tell us how we can improve your experience on xxxxxxxxxx?
<%=request.getParameter("stepeightFeedback") %>

i was messing around and came up with this. it doesnt remove the null, but if it is null it adds ABC beside it. so i think i might be getting close. i just need to figure out how to replace the null.
code]
<%=request.getParameter("steptwoFour") %>
 <% if (request.getParameter("steptwoFour") == null ) {
 %>
 <% out.print("abc"); %>
 <% }
 %>

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

Mid 2010 15" i5 Battery Calibration Questions

Hi, I have a mid 2010 15" MacBook Pro 2.4GHz i5.
Question 1: I didn't calibrate my battery when I first got my MacBook Pro (it didn't say in the manual that I had to). I've had it for about a month and am doing a calibration today, is that okay? I hope I haven't damaged my battery? The calibration is only to help the battery meter provide an accurate reading of how much life it has remaining, right?
Question 2: After reading Apple's calibration guide, I decided to set the MacBook Pro to never go to sleep (in Energy Saver System Preference) and leave it on overnight so it would run out of power and go to sleep, then I'd leave it in that state for at least 5 hours before charging it. When I woke up, the light on the front wasn't illuminated. It usually pulsates when in Sleep. Expectedly, it wouldn't wake when pressing buttons on the keyboard. So, what's happened? Is this Safe Sleep? I didn't see any "Your Mac is on reserve battery and will shut down" dialogues or anything similar, as I was asleep! I've left it in this state while I'm at work and will charge it this afternoon. Was my described method okay for calibration or should I have done something different?
Question 3: Does it matter how quickly you drain your battery when doing a calibration? i.e is it okay to drain it quickly (by running HD video, Photo Booth with effects etc) or slowly (by leaving it idle or running light apps)?
Thanks.
Message was edited by: Fresh J

Fresh J:
A1. You're fine calibrating the battery now. You might have gotten more accurate readings during the first month if you'd done it sooner, but no harm has been done.
A2. Your machine has NOT shut down; it has done exactly what it was supposed to do. When the power became critically low, it first wrote the contents of RAM to the hard drive, then went to sleep. When the battery was completely drained some time later, the MBP went into hibernation and the slepp light stopped pulsing and turned off. In that state the machine was using no power at all, but the contents of your RAM were still saved. Once the AC adapter was connected, a press of the power button would cause those contents to be reloaded, and the machine would pick up again exactly where you left off. It is not necessary to wait for the battery to be fully charged before using the machine on AC power, but do leave the AC adapter connected for at least two hours after the battery is fully charged. Nothing that you say you've done was wrong, and nothing that you say has happened was wrong.
A3. No, it does not matter.

Jabber/WebEx Connect SSO Questions

I've got a few questions around exactly what needs to be done to get SAML working for our Connect accounts to successfully authenticate from Jabber for Windows, Mac, iPhone, and Android.
We have both a Meeting Center and Connect account under WebEx using Loose Coupled Integration. Just this past week I enabled SAML for our Meeting Center accounts which went off without a hitch with the exception of Meeting Center integration with Jabber, which is now broken with a message about SSO enabled Meeting Sites not being supported (I think this would maybe be fixed if we had Tight Coupled Integration with our two account?).
Anyway, my questions are...
For Windows, I understand all clients will need to be reinstalled with the MSI argument for the SSO_ORG_DOMAIN switch I've read about, is that correct? Are there any other switches needed for the reinstall?
How will this work with the Mac and mobile clients? There's obviously no command line options to specify for the installations here, will they just know to kick over to my IdP for authentication once they see an email address that falls under an org with SSO enabled? If so, why does the Windows client need to be completely reinstalled and not just know to find the IdP from the Cloud Connect service like Meeting Center does with the Productivity Tools?
We're just doing this for our Connect Web IM accounts, not attempting any sort of SSO with the phone accounts/UC integration yet.
Any ideas on getting the Meeting Center integration into Jabber working again?

I'd suggest posting your question over on the Jabber Pilot forum, as this forum is specific to Jabber Guest questions:
https://supportforums.cisco.com/community/4551/jabber-pilot-support
-jim

My iPad wont let me download apps bc security questions, but when I try to make them it freezes

Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

ASA VPN QUESTION

Hi All
The question is pretty simple. I can successfully connect to my ASA 5505 firewall via cisco vpn client 64 bit , i can ping any ip address on the LAN behind ASA but none of the LAN computers can see or ping the IP Address which is assigned to my vpn client from the ASA VPN Pool.
The LAN behind ASA is 192.168.0.0 and the VPN Pool for the cisco vpn client is 192.168.30.0
I would appreciate some help pls
Here is the config:
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password J7NxNd4NtVydfOsB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.0.11 EXCHANGE
name x.x.x.x WAN
name 192.168.30.0 VPN_POOL2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address WAN 255.255.255.252
interface Ethernet0/0
switchport access vlan 2
<--- More --->
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa724-k8.bin
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nk-acl extended permit tcp any interface outside eq smtp
access-list nk-acl extended permit tcp any interface outside eq https
access-list customerVPN_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 VPN_POOL2 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list VPN_NAT extended permit ip VPN_POOL2 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_POOL2 192.168.30.10-192.168.30.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list VPN_NAT outside
static (inside,outside) tcp interface smtp EXCHANGE smtp netmask 255.255.255.255
static (inside,outside) tcp interface https EXCHANGE https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group nk-acl in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.0.0 255.255.255.0 inside
snmp-server host inside 192.168.0.16 community public
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd dns 217.27.32.196
dhcpd address 192.168.0.100-192.168.0.200 inside
dhcpd dns 192.168.0.10 interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy customerVPN internal
group-policy customerVPN attributes
dns-server value 192.168.0.10
vpn-tunnel-protocol IPSec
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value customerVPN_splitTunnelAcl
default-domain value customer.local
username xxx password 8SYsAcRU4s6DpQP1 encrypted privilege 0
username xxx attributes
vpn-group-policy TUNNEL1
username xxx password C6M4Xy7t0VOLU3bS encrypted privilege 0
username xxx attributes
vpn-group-policy PAPAGROUP
username xxx password RU2zcsRqQAwCkglQ encrypted privilege 0
username xxx attributes
vpn-group-policy customerVPN
username xxx password zfP8z5lE6WK/sSjY encrypted privilege 15
tunnel-group customerVPN type ipsec-ra
tunnel-group customerVPN general-attributes
address-pool VPN_POOL2
default-group-policy customerVPN
tunnel-group customerVPN ipsec-attributes
pre-shared-key *
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a4dfbb82008f78756fe4c7d029871ec1
: end
ciscoasa#

Well lots of new features have been hinted at for ASA 9.2 but I've not seen anything as far as an Engineering Commit or Customer Commit for that feature.
Site-site VPN in multiple context mode was added in 9.0(1) and I have customers have been asking for the remote access features as well.
I will remember to ask about that at Cisco Live next month.

New to Apple, questions about using Windows, and other things

Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?

Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.

RAL question

Similar Messages

Maybe you are looking for