RaLink wifi x10 150n usb adapter mac 10.8

I have the RaLink wifi x10 150n usb adapter. I used it successfully with
OS 10.6 and am looking for a software and/or driver update so it will work with 10.8.
Does anyone kn ow where I can find it?
If not can anyone recomend a good usb adapter with removeable antenna that I can use with a cantenna?
I need to be able to pick up the wifi from my house in my out building.
Thanks!!

OOPS!
I downloaded the driver again and used the Uninstaller; then reinstalled and it now works!
Driver download from http://www.mediatek.com/_en/index.php
Pick Mac 10.8 Driver

Similar Messages

Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

Hi,
I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
cheers!

this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

How do I get MacBook Pro to use Alpha Network wifi usb adapter?

Using OS X. Alpha Network usb wifi adapter using Ralink wireless utility. Network utility says it is connected as 802.11 n WLAN. But my browsers (Safari and Firefox) do not use the adapter to connect to the internet. How do I turn off the internal wifi card and get the OS to recognize the usb adapter?

you have to have the right drivers for your usb data stick.....check the website of the manufacturer for drivers.
to disable your wifi, click on the wifi icon and select, turn wifi off.
good luck..

Install problems USB Adapter Card support 1.4.41 to Mac OS 8.6

I am attempting to install the Apple USB driver 1.4.1 on my PowerMac 7600/132 to be able to use a newer printer. This computer does not have internet access and is a stand alone financial computer running Quick Books Pro.
Mac OS 8.6
128 MB Ram
132 MHZ
I purchased a Keyspan USB PCI Card - UPCI-2
This is a USB 1.1 device and supports "Mac OS 8.6 (or later)
Internet connection required to install driver under Mac OS 8.6 - 9.0
Current USB Extensions
USB Device Extension 1.2 111K Apple yes Enabled Yes
USB Support 1.2 98 K Apple yes Enabled Yes
I have downloaded the USB 1.4.1 driver from the apple download center
http://download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/English-North_American/Macintosh/USBUpdates/
And copied all file to a Zip disc
Files included
About USB Adapter Card Wed, Jan 12,2000 9K
Install USB Adapter Card Thur Feb 24, 2000 29K
Installer Fri Aug15,1997 193K
USB Adapter Card Tome Thur Feb 24, 2000 320K
When I start the install it initiates and then a dialog box opens
"Please insert the disc:
USB Adapter Card Support"
Keyspan was unable to advise any solution.
Any thoughts?
Thanks for your suggestions
Spencer

I did this years ago when I had a PM6500 running 8.6 & added a USB PCI card, but know I didn't have the problem you are having.
When I downloaded from the link you provided, I got this file USBCard_Support1.4.1.smi.bin. After using Stuffit Expander, I got this file +USB Card Support 1.4.1.smi+, which is the installer. I don't have a Mac running 8.6, so I can't try the install.
Suggest you do this. Put the smi.bin file in a folder on your desktop & then uncompress using Stuffit. This will yeild the .sim file. Then double click the .sim file. Did you get the message "+Please insert the disc: USB Adapter Card Support+" when you double clicked the .sim file? Or some other file?
When you downloaded the smi.bin file did you use a Mac or a PC & then put on a Zip disc? What computer did you use to uncompress to get the .sim file?
 Cheers, Tom

Formatting USB Key (MS Pro Duo with IOGEAR USB adapter) for MAC & Windows

Hi,
How do I setup my MS Pro Duo card and IOGEAR USB Adapter to read the entire capacity on both MAC OSX and Windows?
At this moment, I used it on MAC first and then Windows reads the card but the message 'disk full' appears when transferring files onto the card from PC.

Windows doesn't ask to format.
Windows reads the folder and files uploaded on the MACbook. However, it still says that 'disk is full'.
Is it a formatting issue with FAT32 vs NTFS?

Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

D-LINK usb adapter compatibility with MAC Mini

I just bought the usb adapter wirelss and can't seemed to install. Can anyone help? Tried looking in the internet for help but no luck!
Thanks saded

which model is it?
if is this one then certain revisions of this usb adapters use the ralink chipset so you can use Ralink Drivers

Ralink Wifi Adapter Not showing

My device manager doesnt show my Ralink wifi adapter. When i click on view hidden devices, i can see it there but it says Code 45 error, hardware not connected. Why is this happening? Please help. Im unable to use wifi on my device because of this!

Hi @yashagarwal ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g6-2314ax Notebook and having issues with the Wireless drivers. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system it has built in Wireless troubleshooting assistance.
Here is a link to the troubleshooting the Wireless connection.
Here is a document on Airplane mode.
If Airplane mode is on you cannot use your WiFi and you would see the code 45 not connected, so Airplane mode should off and no Ethernet cable connected for the Wireless troubleshooting.
I hope something listed here helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Using 802.11ac USB adapter on Mid 2010 Mac Mini Server

I recently read an article about the 802.11ac connection and it mentioned if you use a USB adapter on a USB 2.0 connection you will lose much of the intended speed. Does anyone know if there is a way around this, like a FireWire USB adapter or is it possible to install a USB 3.0 port on my Mac Mini?
I looked at my PHY Link Speed in the Network Utility and it matches the 802.11 Adapter specifications of 867 Mbit/s.

Hardware Overview:
Model Name:          Mac mini
Model Identifier:          Macmini4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MM41.0042.B03
SMC Version (system):          1.65f2
Serial Number (system):
Hardware UUID:          7BF77715-AB79-5101-86D0-5ED301D18E8
Thanks

Wifi with LM Technologies USB adapter

The airport card on my Mac Mini failed (reception flickers and can't connect when others can easily) so rather than wait 4 weeks without a computer for a repair I bought an LM Technologies LM006 USB adapter thinking it was a cheap and cheerful workaround. I've installed the Realtek WLAN Client utility but it doesn't open just bounces once in the dock then gives up.
Not sure if the problem is that the USB isn't designed for a computer that already has an (albiet failed) airport card?
Tried a few different settings, airport turned off, tried ethernet settings in network system prefs because I read somewhere it might be seen as an ethernet connection but I can't see any evidence anywhere, including system profiler, that the USB had been recognised at all.
Any help much appreciated

Thanks for that.
Sure I did the exact same thing this morning but maybe I pulled the ethernet able as well or something. Anyway this time the WLAN client utility bounced into life straight away and (a first) there was a green light on the usb adapter. After a few bits of fiddling around I'm online, playing airtunes and the ethernet cable is back in the cable drawer.
Hurrah!!

Usb adapter for mac not working

Couple Days ago my USB adapter was working fine for my ipod to connect to Itunes but today when I tried to plug in my ipod the itunes is not doing anything. Not Charging. All the drivers are undated, softwares are updated. I already tried reinstalling and uninstalling What can I do? Please Help!

Looks to me more like a hardware than a software problem. Have you tried using a different USB port or a different cable? Does the iPod charge when plugged into a wall mounted charger?

Will it work with R500? Amped Wireless High Power Wireless-300N 600mW USB Adapter.

Hi all, new to this site and also to owning a laptop. Bought what I believe to be 2009 Thinkpad R500. It works well with windows 7 installed. I bought it so that I could stream music in my shop connected to my stereo. I sometimes think I should have maybe save up a little more and bought a new laptop. Paid $200 for it. Anyway I was wondering if anyone could tell if the item below will work with my laptop? My thoughts are to some time in the near future to also install an outdoor wifi antenna on my house. One thing I did notice in my shop which confused me a little was when I had my laptop and my wife's laptop down in my shop, her signal strength was around 20 mbps and mine only showed 13 mbps. Any ideas to why?
Add Long Range Wi-Fi to your Computer: Whether you're using a Mac or Windows laptop or desktop PC, the UA600 attaches to an available USB port (2 USB ports for maximum performance) on your computer and provides long range Wi-Fi connectivity for connecting to your home Wi-Fi network or a Wi-Fi hotspot.
Maximum Wi-Fi Range: The internal High Power 600mW Amplifier (12x the power of standard adapters) is optimally paired with a High Power 5dBi Wi-Fi antenna to provide maximum wireless range and performance.
Simple Setup: Setup is quick and simple: Insert the installation CD, install the software and plug in the High Power USB Adapter.
Great for Power Users: The High Power USB Adapter is designed for Wi-Fi users that demand the most from their Wi-Fi networks. The UA600 features wireless data reception speeds of up to 300Mbps for streaming video, transferring large data files and other high traffic Wi-Fi activities.
Upgradable Antenna for More Wi-Fi Range: The High Power USB Adapter features a detachable antenna that can be replaced with an indoor or outdoor high gain antenna for even more Wi-Fi range or for special installation applications.
Universal Compatibility: The High Power USB Adapter works great with all 2.4GHz 802.11b/g or n wireless routers, Wi-Fi networks and manufacturers.

Your machine as it left the factory:
P8600(2.4GHz), 2GB RAM, 160GB 5400rpm HD, 15.4in 1280x800 LCD, Intel 4500MHD, CDRW/DVDRW, Intel 802.11agn wireless, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint Reader, 6c Li-Ion, WinXP Pro
I'm going to take a stab in the dak that the card is Intel 5100AGN, which *should* support both bands. That's what my own R500 came with.
Depending on the amount of $$ that you want to spend on a router, there are many possible options. I'd suggest checking out the recommendations from various broadband forums.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

How to use a high power wireless-n usb adapter

I recently purchased a kinamax high power wireless-n USB 2.0 adapter to boost my wifi signal. The data range is 802.11n. The only problem is that I can't use the adaptor. The box says that the supported OS is MAC OS X. But when I connect the adapter nothing happens. There is not even sign that the USB adapter is connected. Can anyone help me?

Hi Kelvin,
I understand that you want to control pins on your serial port using LabVIEW. Since you are using Windows XP, only LabVIEW version 7.0 will be able to control the pins. The pins can be controlled by modifying the values of the access registers that windows associates with each pin. If you are using LabVIEW 7.0, then the VI's located on the Funtions >> Advanced >> Port I/O palette should help you assign values to the proper pins.
This information can also be found on another discussion forum thread located at the following url:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000438A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Thanks for contacting NI, and I hope this helps.
Marcus G.
National Instruments

Wifi using Treandnet USB and Time Machine on older iMac G4.

I have a 1st Generation Time Capsule, and older iMac G4 the cool one that looks like a lamp. I just bought a Trednet TEW-644UB Wireless N USB Adapter so that I can get wifi on my older mac from my time capsule. I installed the mac software from the disk that came with it, but there are no further instructions and I can't get it to work. Can someone walk me through the set up?
When I boot up it automatically opens the Trednet Wireless Utility. I can see my wireless network on there listed under SSID, the BSSID says 00-21-E9-B8-A4-1... The signal is 100%. The Channel is 1. Authentication says WPA-PSK, Encription says TKIP;AE, and the network Type says infrastructure. I'm pretty sure the setting are wrong but I'm not sure what to set them too.
Thanks

I called Trednet and all I needed to do was hit the activate button. Works great... and very inexpensive.

OS X driver for Airlink AWLL6070 wireless USB adapter?

Is there any one know the Driver for Lion and SL for Airlink wireless AWLL6070 USB adapter. Airlink web site does not show any Mac driver support. I use this adapter in window and it works fine. I want to use it on Mac too.

kappy,
just like you mentioned, the driver did not work. I force my lion boot into 32-bit mode but it didn't work as well. I look at the /var/log/install
"PKLeopardPackage <file://localhost/Users/john/Downloads/MAC-airlink-awll5077/10.6/Installer.pkg# rtl8192sus.pkg>"
It was installing rtl8192sus.pkg
I believe it is driver for realtek chip.
I somehow spot in system profile that airlink awll6070's manufacture chip is Ralink.
802.11 n WLAN:
BSD Name:          en4
Product ID:          0x3c27
Vendor ID:          0x14b2
Version:          1.01
Serial Number:          1.0
Speed:          Up to 480 Mb/sec
Manufacturer:          Ralink
Location ID:          0x1d110000 / 4
Current Available (mA):          500
Current Required (mA):          450
I search ralink.com and found that there is a driver for mac.
http://www.ralinktech.com/support.php?s=3
I download and install 10.6 version of driver on Lion. well, it seems to work now.
I forced my system to boot into 32-bit because one of the driver did not work in 64-bit mode.
I will give it a try to boot into 64-bit mode to see if it work.

RaLink wifi x10 150n usb adapter mac 10.8

Similar Messages

Maybe you are looking for