RAM ISSUES A215-S7407 - PSAFGU-01V002 SUSPEND MODE ERROR WITH 4GB RAM

Hi, im having some troubles with my laptop.
Because it comes only winth 1GB RAM (512MB x 2) i decided to give it an upgrade to 4GB (Max Capcity) according to specifications details on the support site. So i bought two (2) DIMM Modules KINGSTON 2GB 667MHZ, exact model # KVR667D2S5/2G Everything was working fine until i close the lid and it suspend.
Normally, when i open the lid, it will wake up, and everything will work fine, BUT NOW when it wakes up i have distorted sound and horizontal lines on screen, and sometimes i get a BSOD (BLUE SCREEN OF DEATH) and it restart itself.
TEST THAT I MADE:
ONLY 1 DIMM of 2GB  - IT SUSPEND AND WAKES UP NORMALLY (I tested both Dimms 2GB separately)
1 DIMM 2GB / 1 DIMM 1GB (TOTAL 3GB) - IT SUSPEND AND WAKES UP NORMALLY
2 DIMMs 2GB  (TOTAL 4GB) - IT SUSPEND AND WAKES UP WITH DISTORTED SOUND AND HORIZONTAL LINES ON DISPLAY.
It seems like the problem appears only with Max. Capacity (4GB) RAM and only when it suspend CLOSE THE LID (POWER LED CHANGE COLOR BLUE TO ORANGE AND FADES AND COMES).
With Hibernation, it works fine, the problem is when it suspend.
It looks that the problem is on the motherboard, maybe a NEW BIOS RELEASE that fix the situation.
I appreciate if somebody can speak to TOSHIBA SUPPORT DEVELOPER and ask them for an BIOS Update.
i know that im not the only one with this problem, there is another person that wrote a post "RAM ISSUES" and refers to the same situation, but as i guess, it wasn't solved at all.

Make sure you install the memory when the light is not flashing, i.e. completly off not sleeping.
What if you try adjusting - MSCONFIG/Advanced Options/Maximum Memory
This signature left intentionally blank.

Similar Messages

  • IMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB

    iMac 2.4GHz Core 2 Duo 20" Anodized Aluminum (MA877LL)
    iMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB
    2 x2GB Geil GX2S6400-4GDCA
    Computer refuses to boot with both chips installed 4 GB.
    Computer will boot and recognize 3 GB..( Apple 1 GB + 2 GB GEIL)
    Both Geil Chips will boot, when paired with the Apple 1 GB chip.
    machine recognizes 3 GB ram.
    Please advise...

    Ensure the computer's RAM is fully seated down, and then try resetting the PRAM by holding down options-command-P-R at boot. The computer will make the boot chimes and then reset and chime again. When it chimes the second time release the keys and let the thing boot normally. Hopefully that will let it recognize the RAM.

  • Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard

    Using a MacBook Intelcore 2 Duo 2,2GHz (3,1)with 4GB RAM. I can`t install Mac OS X 10.6 Snow Leopard?? Need Help!

    That machine requires the 10.6 white retail disks, gray or black machine specific ones from another Mac won't work.
    How to erase and install Snow Leopard 10.6
    For Snow Leopard Speed Freaks
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Will my MacBookPro3,1 Intel Core 2 Duo, 2.4 GHz with 4GB Ram run Mountain Lion?

    Hi everyone. I have a MacBookPro3,1 Intel Core 2 Duo, 2.4 GHz with 4GB Ram — will it run Mountain Lion? My hard drive has 615 Gigs of free space. If so, is it worth it for me to upgrade? Will all the new features be available to me. Presently I am running Mac OS X Lion 10.7.4 (11E53). I heard that there is an update 8.1 out there with developers as of yesterday.
    Thanks.

    Hi John.
    Yes, an erase and install sounds like a good idea. I just need to check my Adobe CS5 software to see if I need to upgrade the suite. If that is the case, then I may need to put it off for a bit. Thanks so much for your help.
    I have a newer MacBook Pro at work, but usually wait to upgrade it, till I've been running it at home on my personal computer for a while. Would hate for it to mess up my production schedule.
    Thanks again and have a good evening.

  • Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram.

    Any suggestions, or fixes, as to why I have to rebuild my library after EVERY shutdown? I am running the latest 10.6, 2.92 ghz iMac core 2 duo, with 4gb ram. Install went well, as far as I know. No other problems. I fear, that unless I fix this, when I upgrade to a new computer, I will be taking the same problem with me.

    So if you start Aperture do some stuff in it, quit, then open Aperture again it starts up OK but if you then quit Aperture, reboot your machine and start Aperture it stalls?
    You're internal drive is getting close to being overfull your at about what 18.5% free space (some we'll say it's already overfull). You might what to think about freeing up space. If you weren't having any troubles I'd say it was fine but as you are experiencing problems it is something to look at.
    While its been doing the processing have you been able to open the activity window in Aperture? If you click on the spinnig gear (not the beachball)  when Aperture is busy you can usually get the activity window to open.
    Other then that not sure what else to recommend at this point.

  • Is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

    Well it depends on the age.     http://www.everymac.com/ should help you identify the age of the two models.
    Apple may use two processors called i5, but newer models have different optimizations than older models.
    The processor is usually not the main affect on speed.  RAM helps, but barely unless everything is on an SSD already.   Hard drive speed is usually the limiting factor of speed on computers.   eSATA hard drives with higher RPM can often yield the fastest results because notebook hard drives tend to be slower that are not SSD, but for those you need either Express/34 or Thunderbolt based adapters.

  • I got a MS-7253 k9vgm with 4gb ram and W7253VMS.180 BIOS but I only can see 3GB

    Hi,
    I have a MS-7253 with 4gb ram recently installed on it but in bios memory check state it only shows 312something KB (3.2GB) and BIOS is the latest one.
    According to MSI's site, this motherboard is supporting upto 4gb. I've turned off the on board vga as well and my vga card is an nvidia geforce 8400GM.
    the funny part is windows 7 recognize the whole 4gb but it says I only can use 2.8gb of it.
    whats wrong with my M/B? is there any other update which I'm not aware of?

    Thanks for your reply,
    does that mean there is no chance for upgrading ram to 4g? or by BIOS update I can do that?
    I have found another BIOS update newer than what I've got from this link:     https://forum-en.msi.com/index.php?topic=153338.0
    just in case if I screw my BIOS can I revert it back to what it used to be?

  • G530-44463​8U Sleep/Hibe​rnate issue with windows7 Ultimate 64Bit with 4GB ram

    I have a problem with Lenovo G530-444638U. I upgraded to 4Gb ram and installed a fresh copy of Windows 7 Ultimate 64bit and I’m facing sleep and hibernation problems. When I try to put laptop to sleep mode and I try to resume from sleep, it restarts by itself. I tried every single option in my power management and every command leads to restart. I also have the same problem with hibernate mode. When I try to resume from hibernate, it restarts and I have option on the screen to delete restoration data in order to continue,  
    Reading on Lenovo forums and Google search, it looks like it is a known issue.  I have the latest graphic and WAN drivers from Intel for win 7 and still I can’t solve issue. Is anyone has same model and expediting this problem, any help would be appreciated. 
    When I downgraded my ram form 4gb to 3gb then sleep and hibernate works fine.  i installed vista ultimate 64bit and had same sleep/hibernate issue. I called lenovo tech support and they told me to call software support, which is provided by third part and it is not free, i don't think it is software issue. I tried diffrent ram and had same issue.
    T6500(2.10GHz), 4GB ram 16HTF25664HY-667E1, BIOS Version     6GET19WW(for NON-HDMI), Lenovo Energy Management 4.4.1.1 2009-10-22 7.67 MB Windows 7 64bit 

    also one more issue i had... is when i try to boot up... somtimes it will go into a loop for a couple times. it will try to load windows(no blue screen)-->reboot--> and ask me if i want to use system recovery/start windows normally.
    any help will be greatly appreciated.
    Thanks very much.

  • Windows 7 not booting with 4gb ram

    Hi!
    Situation:
    I installed Windows 7 via Bootcamp. On 2gb ram (2x1gb or 1x2gb doesn't matter) windows boots fine.
    I upgraded to 4gb ram (2x2gb) and now Windows is not booting. As far as I know, it's not even getting in DOS.
    There's just the cursor blinking into infinity...
    What I've tried so far:
    Installing windows with 2gb and ugrading to 4gb.
    Installing windows with 4gb
    Tried the 32bit and the 64bit version
    Found a 'solution' on the web making me boot in safe mode in order to change the maximum ram windows accepts.
    Attributed more gb to the windows partition
    I'm out of ideas, what do you think?
    regards,
    Massimo

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • X-Fi Driver doesn't work with 4GB RAM - Verif

    I have a X-Fi Platinum and 4GB RAM?( windows XP can only recognize 3GB memory).
    Then
    Install the latest X-Fi driver on Win XP SP2, it works w/o any problem
    I?format the HDD, install windows 2003 R2 SP2 Standard (Win2003 can recongize 4GB ram)
    I install ?the same X-Fi?driver. After reboot, I can only hear crackling from the sound card,
    Then I edit the boot.ini file by adding /maxmem=4096, reboot, now the sound card works w/o any problem
    Creative, could you please improve you X-Fi?driver by considering the large ram issue ?
    Message Edited by netsonicyxf on 08-28-200702:40 AM

    JohnZS wrote:
    I might be wrong, and if I am wrong then could someone correct me, but as far as I knew, Creative Cards do not support Windows Server 2003. I maybe wrong, have you tried the latest BETA driver (see exciting news thread)John
    In windows 2003, the driver works if I limit the total ram to 4096MB by adding /Maxmem=4096 in boot.ini file.
    FYI
    /maxmem
    The /maxmem parameter limits the physical memory available to Windows.
    /maxmem=SizeInMB
    Subparameter
    SizeInMB
    Specifies the maximum amount of physical memory available to Windows. Enter a decimal number that represents the amount of memory in megabytes.
    Comments
    This parameter actually limits Windows to memory addresses less than or equal to the specified value. Because some memory within the remaining address space might be reserved for nonsystem use, the actual memory available to Windows might be less than the amount that you specify.
    The /maxmem parameter is supported only on Windows Server 2003, Windows XP, and Windows 2000. On Windows Server 2003 and Windows XP, use /burnmemory to limit system memory more precisely. On Windows Vista and later versions of Windows, use the removememory or truncatememory parameters with the BCDEdit /set command
    You can use this parameter to test a driver in low memory conditions. For example, you can use this parameter to limit a computer with GB of memory to 256 MB of memory.

  • Lighting effects not working, 'Could not apply the workspace because there is not enough memory (RAM)' with 4GB RAM?

    Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
    They all have at least 4GB RAM. The Graphic Card is compatible.
    Layer to work on is RGB-Type.
    It's all about Photoshop CC 2014, trial version.
    When I go to 'Lighting effects' it says first:
    'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
    - I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
    - Video card is compatible.
    Second it says:
    ''Could not apply the workspace because there is not enough memory (RAM)'
    - RAM on all the computers I tested it with is at least 4GB
    Please help!

    We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
    Windows OS
    Click Start.
    On the Start menu, click Run.
    In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
    The DirectX Diagnostic Tool opens. Click the Display tab.
    On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
    Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
    NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
    AMD: http://support.amd.com/en-us/download
    Intel: http://support.intel.com/support/graphics/

  • 2010 Macbook Air with 4GB RAM or 2011 Macbook Air with 2GB RAM

    So I am looking a the following 2 Reforebished Macbook Air models:
    Refurbished MacBook Air 1.6GHz dual-core Intel Core i5
    http://store.apple.com/ca/product/FC968LL/A
    Originally released July 2011
    11.6-inch (diagonal) high-resolution LED-backlit glossy widescreen display
    2GB memory
    64GB flash storage
    Thunderbolt port with support for up to 2560-by-1600 resolution
    FaceTime camera
    Intel HD Graphics 3000
    $789
    Refurbished MacBook Air 1.6 GHz Intel Core 2 Duo
    http://store.apple.com/ca/product/G0JK0LL/A
    Originally released October 2010
    11.6-inch LED-backlit glossy widescreen display
    4GB memory
    128GB flash storage
    NVIDIA GeForce 320M graphics
    FaceTime camera
    $799
    So my main question is which is better, the core 2 duo with 4GB of memory and 128GB of storage, or is the intel core i5 with 2GB of memory and 64GB of storage better? There is only a $10 differnce so the price doesnèt matter to me.

    i would go with the one with more RAM and larger SSD.
    Simple reason - you can't upgrade it in the future.
    Sure the other one has a faster processor but what's the use of having a faster processor if you only have 2GB of RAM?
    The other one is newer, but again, you can't upgrade it.
    That's the reason why it's also cheaper........

  • Virtual Windows 7 machine with 4GB RAM

    I'm currently upgrading my iMac to 8GB RAM, I have a 2.66GHz processor , will I be able to install Windows 7 in a virtual machine using VMWare Fusion 4 with 4GB of dedicated RAM?

    Sure, why not.
    Depending on your usage you might wanna rethink the amount of RAM you assign to the Fusion Windows VM.
    Windows 7 runs quite well with 2GB for example whne you usage is the more "Office-like" one.
    Keep in mind that the amount of RAM you assign to a Fusion Windows VM is not avaiable to Mac OSX until you close the Windows VM and Fusion.
    Stefan

  • Does P965 Platinum work with 4GB Ram?

    I'm using Vista 64 bit Ultimate with 2x1GB ram.  I want to buy another 2x1GB kit (just because RAM is so cheap now), but there seem to be some posts that say the motherboard can't use all the memory even thought the manual says it should support it.  Is anyone out there actually using 4x1GB on this board successfully?  Thanks.

    Please ignore my comment. I saw 'platinum' and my brain filled in p6n. My badQuote from: JoeWPgh on 13-May-07, 04:10:00
    There's a thread here about Vista 64 and 4 gig RAM running very slowly. You might want to read through it. The upshot of it is that flashing the BIOS to beta 1.22 seems to have solved most people's (including mine) problem.

  • I have a macbook pro 2011 with 4GB RAM, 320 GB hard disk, mountain liion installed. for the past 2 weeks, it is taking nearly 10 mts to boot.

    It is taking nearly 10 mts for moutain lion to boot. I have used Mactune up utility to check disk status and there are no problems with the disk. Double checked with SMART utility and it reported no issues with the disk. Out of 320GB disk, 220 gb is free space in the disk
    Ran  anti virus to check for any virus relalted issues and found none. I have also checked programs which are part of login in User and Groups. I found only iTunes helper and unchecked the same. Post this operation, i had shutdown my pc and then re-started and am still experiencing 10 mts window for start up. I am not seeing errors in the macbook pro. can someone advise what needs to be done. do i need to reinstall mountain lion. if yes, can someone advise me how to reinstall mountain lion without erasing disk.

    pls refer my previous post, i have indeed checked console message. please let me know if i need to look for specific error message. i have pasted logs below from the latest PC start i did. time mentioned here is indian standard time.
    03/01/13 6:43:35.000 PM bootlog[0]: BOOT_TIME 1357218815 0
    03/01/13 6:53:54.000 PM kernel[0]: PMAP: PCID enabled
    03/01/13 6:53:54.000 PM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    03/01/13 6:53:54.000 PM kernel[0]: vm_page_bootstrap: 835918 free pages and 204466 wired pages
    03/01/13 6:53:54.000 PM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
    03/01/13 6:53:54.000 PM kernel[0]: zone leak detection enabled
    03/01/13 6:53:54.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    03/01/13 6:53:54.000 PM kernel[0]: standard background quantum is 2500 us
    03/01/13 6:53:54.000 PM kernel[0]: mig_table_max_displ = 74
    03/01/13 6:53:54.000 PM kernel[0]: TSC Deadline Timer supported and enabled
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto kext started!
    03/01/13 6:53:54.000 PM kernel[0]: Running kernel space in FIPS MODE
    03/01/13 6:53:54.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    03/01/13 6:53:54.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    03/01/13 6:53:54.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    03/01/13 6:53:54.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    03/01/13 6:53:54.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    03/01/13 6:53:54.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    03/01/13 6:53:54.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    03/01/13 6:53:54.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    03/01/13 6:53:54.000 PM kernel[0]: MAC Framework successfully initialized
    03/01/13 6:53:54.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    03/01/13 6:53:54.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    03/01/13 6:53:54.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    03/01/13 6:53:54.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration begin ]
    03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
    03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    03/01/13 6:53:54.000 PM kernel[0]: console relocated to 0xf80000000
    03/01/13 6:53:54.000 PM kernel[0]: PCI configuration changed (bridge=16 device=4 cardbus=0)
    03/01/13 6:53:54.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
    03/01/13 6:53:54.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe353428; max speed s800.
    03/01/13 6:53:54.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    03/01/13 6:53:54.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    03/01/13 6:53:54.000 PM kernel[0]: rooting via boot-uuid from /chosen: BE73913A-31AD-3011-8443-CBF5FED7F18E
    03/01/13 6:53:54.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    03/01/13 6:53:54.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    03/01/13 6:53:54.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    03/01/13 6:53:54.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK3265GSXF Media/IOGUIDPartitionScheme/Customer@2
    03/01/13 6:53:54.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
    03/01/13 6:53:54.000 PM kernel[0]: BTCOEXIST off
    03/01/13 6:53:54.000 PM kernel[0]: BRCM tunables:
    03/01/13 6:53:54.000 PM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    03/01/13 6:53:54.000 PM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    03/01/13 6:53:54.000 PM kernel[0]: Kernel is LP64
    03/01/13 6:53:54.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    03/01/13 6:53:54.000 PM kernel[0]: macx_swapon SUCCESS
    03/01/13 6:43:36.990 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    03/01/13 6:53:47.390 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    03/01/13 6:53:54.499 PM fseventsd[46]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (19 619 646)
    03/01/13 6:53:54.500 PM fseventsd[46]: log dir: /.fseventsd getting new uuid: 70E015B3-1743-4179-AE1D-35C49D8FD5AB
    03/01/13 6:53:54.761 PM distnoted[58]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    03/01/13 6:53:55.353 PM hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    03/01/13 6:53:55.000 PM kernel[0]: BCM5701Enet: Ethernet address 3c:07:54:1b:f4:64
    03/01/13 6:53:55.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 28:cf:da:ef:f6:c2
    03/01/13 6:53:55.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    03/01/13 6:53:55.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    03/01/13 6:53:56.000 PM kernel[0]: Waiting for DSMOS...
    03/01/13 6:53:57.178 PM appleeventsd[51]: main: Starting up
    03/01/13 6:53:57.186 PM mDNSResponder[38]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
    03/01/13 6:53:57.199 PM airportd[65]: _processDLILEvent: en1 attached (down)
    03/01/13 6:53:57.253 PM hidd[45]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    03/01/13 6:53:57.251 PM com.apple.usbmuxd[21]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    03/01/13 6:53:57.307 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    03/01/13 6:53:57.000 PM kernel[0]: createVirtIf(): ifRole = 1

Maybe you are looking for

  • Setting up 2 App-V Servers

    Hi there I'm currently planning our App-V 5 Environment in our company. My goal is to have 2 mangement / publishing servers with a Netscaler in front of it, loadbalancing the management and publishing website. The AppVManagement Database will be stor

  • Why is my Layer Mask filling with Grey

    I'm working in a multi layered CS5.1 Photoshop project (I did not create it). One of the adjustment layers in the project needs a layer masks, and when I create one it is not working properly. I make my selection that I want to mask off and create th

  • I am no longer able to get e-mails

    My iphone 4 iexplicably no longer receives e-mails.  I have tried re-entering details etc and always get the same message - "unable to connect to server"

  • Cannot connect to YouTube on iPad 2

    After upgrading to iOS 5, my iPad 2 seemed fine, but the next day I suddenly got "cannot connect to YouTube" when using the YouTube app. Other iOS devices on the same wifi LAN connected fine. The iPad had been fine for a day after upgrading. I looked

  • Fetxhin tax conitions in purchase order

    hi all, i am doing medruck.i need to display bacis excise duty,edu.cess ,hr.educess,cst and vat.i found the codition types in konv.but some condition types not found in konv.i used condition no (knumv).but i could not find the conditions(jmop,JMX1,JE