Ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code

ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code.

Back atcha!

Similar Messages

  • I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

    I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

    Hi guys,
    I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have  2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means.  I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
    Do u guys think the ram-stick was broken because the imac was too hot???

  • 4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    Indicates a sensor on the logic board has failed. Make an appointment at an Apple store to confirm. You can also try an SMC reset, then run the Apple Hardware test again:
    http://support.apple.com/kb/HT3964

  • I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
    iMac, Mac OS X (10.7.2)
    Basically i tried to enter too much information into my calendar and it has crashed  now i can not get rid of the error message or use the calendar  can anyone help please

    did you find ou how to get rid of it i can't

  • I have macromedia fireworks mx on an old laptop and want to install it on my new laptop were can I find the download file

    I have macromedia fireworks mx on an old laptop and want to install it on my new laptop were can I find the download file

    Here is a copy of the error
    This means : Installation failed.
    Verification of the Adobe Software failed
    The product you want to install is no valid Adobe product and seems to be falsified.
    HUgo
    Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Hugo please turn off your e-mail signature.
    If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files.  You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    To download a fresh copy of the installation files please see Download CS6 products.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again

    I have downloaded, extracted and installed Elements 12 but it will not open nor can I find the Adobe file in the file where I installed it to..  When I've tried to download and install again it says that the "Object Already Exists."  It may exists, but it is not visible in the file or in my list of programs on the Startup Menu.

    cactisken
    You should not have to uninstall Premiere Elements 12/12.1 in order to install and run Premiere Elements 13 on the same computer unless your computer is overloaded and the computer resources are compromised. Just use one program at a time.
    Can you still use 12/12.1 on this same computer that will not let you use 13?
    What specific Window operating system are you using?
    Let us go through the usual drill...
    1. Does the problem exist with and without the antivirus and firewall(s) disabled?
    2. Are you using a pen and tablet device instead of a mouse?
    3. Did you install the program with antivirus and firewall(s) disabled?
    4. Disable the SLCache Folder found in Windows 7, 8, or 8.1 64 bit
    Local Disk C
    Program Files (x86)
    Common Files
    Adobe
    and in the Adobe Folder should be the SL Cache Folder that you delete or disable by renaming the Folder
    from SLCache to SLCacheOLD.
    5. Are you running the program as Administrator and is the latest version of QuickTime installed on the same
    computer as Premiere Elements 13?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • Error 1301: I need to reinstall Acrobat but can't find the original file

    Error 1301: I need to reinstall Acrobat but can't find the original file

    Pro
    Danielle
    Danielle DeGarmo | DEGARMO CREATIVE | 703-351-6767
    2258 North Vernon Street, Arlington VA 22207
    Dropbox: https://dropbox.hightail.com/DCsend

  • TS3694 how can i resolve the issue of this error 1015?

    how can i resolve the issue of this error 1015?

    Google it. You can not get help for your jailbroken phone here.

  • Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

    Hi. My 2013 MacBook Air has suddenly reverted to a previous Excel spreadsheet (from May). I use the same spreadsheet several times a day and hit cmd 's' every 5-10 minutes. How can I find the version I was using yesterday?? Please help. Thanks

    Might be something for you here > Automatically save and recover files - mac excel

  • I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but i i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and can't find the solution. This should be a basic thing.

    I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but if i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and i can't find the solution. This should be a basic thing. How frustrating !!

    pedrofromsydney wrote:
    €          55,555.00
    that's the result i get. Still why can't i just type for ex. 29.55 and stay like that on the cell ? Why does it always change to 2955 or 2955.00. ??
    I don't understand this
    It appears you have the cell formatted to Currency, with the default two decimal places.
    What I don't understand, though is how Numbers arrived at a result of fifty five thousand five hundred fifty five on your entering the exact keystrokes in Yvan's post:
    an equals sign, followed by five ones, followed by a forward slash, followed by a 2.
    Here's the result I get:
    Could you do the following:
    Open a NEW Numbers document using the Blank template.
    Drag the Row and Column control (bottom right corner) to reduce the table to two columns and three rows.
    Enter the words "My table" in cell A1.
    Click on cell B2 to select it, then enter the formula 
    =11111/5
    Use only those eight keystrokes; do not include any commas, periods or other characters not shown.
    Click on B2 again to select it.
    Open the inspector and choose the Cell Format button.
    Do not make any changes in the Inspector window.
    Drag the Inspector window to the position shown in my screen shot.
    Take a screen shot that includes the Formula bar, the Table (with cell B2 selected) and the Cell Format Inspector pane (the same screen area as in my screen shot above).
    Post the screen shot in a reply to this post.
    I'm hoping there will be some clues as to what's happening here in the screen shot. Procedure for taking and posting a shot of part of the screen follows.
    Regards,
    Barry
    SCREEN SHOTS (Selected area)
    Place the mouse pointer at the top left corner of the area you want to include.
    Press shift-command-4.
    The mouse pointer will change to a plus sign on a circle.
    Hold down the mouse button and drag to the bottom right corner of the area you wan to capture.
    Release the mouse button.
    The screen shot will be saved to your desktop with the name "Picture 1" (The number will be different if you have taken other screen shots).
    POSTING
    In the Compose frame, place the Insertion point at the location you want the picture to be inserted.
    Click the camera icon above the compose frame to open the Insert Image dialogue.
    Click Choose file to open the Choose dialogue.
    If necessary, navigate to the Desktop and click on the 'by date column header to sort the files by date, most recent at the top.
    Select the most recent picture file.
    Click Choose.
    Wait for the picture's file name to appear beside Choose file.
    Click insert image.
    Done.
    B.

  • I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

    I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

    Get in touch with support if it doesn't show up on your Adobe account.
    Mylenium

  • On Hulu I keep getting ad loading errors that stops my movie/show. I can not find the disable add block. It is not under tools, options, the tool bar or add-ons

    On hulu I keep randomly getting the error message that Firefox is blocking the adds and i need to disable adblock in order to continue watching. Problem is I can not find the adblock option. It is not under tools, the addblock toolbar. I also tried enabling it under add-ons (under extensions) and it was not there either.

    Hi i_see_dumb_people88, it appears you only have two Extensions installed and both of them are disabled. Is that correct if you compare this list:
    orange Firefox button ''or'' classic Tools menu > Add-ons > Extensions
    In that case, you do not have the AdBlock add-on. However, it's possible that ads are blocked in some other way, for example, your security software (if it has this feature) or domains you listed in the Windows hosts file (if you downloaded a hosts file or edited it manually).
    If neither of those is applicable, they probably would affect other browsers as well as Firefox. Do you know whether the problem occurs in IE?

  • How  can i find the IDoc's with errors

    Hi gurus,
    How to find the errors in Idocs and How to solve it?How can i rectify the errors?
    Thanks in advance.
    kumar.

    Hi Kumar,
    You can goto WE02 T'code and give the IDOC number (check date range).  Click on Status Records.  It shows the exact error. 
    If IDOC fails it is gives your the status 51 otherwise it gives you the status 53.
    Assign points if useful
    ~Rajesh

  • I keep getting a message saying Helper extentsion has encountered a problem and need to close i want to disable it but can't find the file

    Trying to gt my computer to move faster i deleted microsoft internet explorer an in order to get my computer to let me on the internet i had to download firefox when i did this i started receiving a message that said Extentsion helper has encountered a problem and needs to close not knowing this came from firefox i tried to delete firefox but kept receiving the messag i have since re-downloaded firefox but can't find extension helper to deactivate it my computer will not let me do anything i need help resolving this please
    Stacey Featherstone

    Can you run Firefox long enough to display the Add-ons page? Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable. (Remove also is available for some extensions, but not the ones that Firefox found in a registry scan or shared folder elsewhere on your system.)
    Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Any improvement?
    If you cannot access the Add-ons page, try starting Firefox in Safe Mode, since that deactivates extensions and hopefully will stop that message from coming up long enough to get to the Add-ons page.
    ''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
    ''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Success?

  • Where can I find the batch no (or UPC code or Lot no) in the Delivery doc?

    Hi all,
    I am using 4.6c . I send the IDoc DESADV to my customer and they get the EDI document which their translator converts back to IDoc. I need to find this information in the delivery document (vl03n):
    lot no., batch no. UPC code. so that I can populate them in the outbound IDoc.
    I could find the batch no in the table LIPS in the field CHARG. and I know in the EDI, the segment is SLN where this information is stored, but where is this in the actual delivery document (and the outbound IDoc)?
    Please ask me if my question should be elaborated.. Hope you can tell me the tab and the field in the Delivery document (it could be at header or item level.)
    Thanks,
    Charles.

    Hi there Charles,
    Batch number is in DESADV IDOC in field E1EDP09 CHARG.  In VL03N, you can drill down into a line item, and go the the Batch Split tab to see this number.
    I don't believe UPC number is a standard SAP field.  There is a EAN (European Article Number) field which can be used like the UPC field if needed. 
    I have a case where a customer sends a UPC and lot number on their order, and needs to see it back on the EDI shipping notice.  I store these values in custom text fields, which pass from the order, back to the DESADV IDOC after delivery.  From there, I can include them in the EDI back to the customer.
    Regards,
    Aaron
    *Helpful?  Poins are appreciated

Maybe you are looking for

  • How do I remove subtitles from Avengers

    I purchased Avengers last Friday on first gen Apple TV.  Double set of subtitiles appear and can not be switched off.  Subtitles not part of the actual movie remain on screen until you exit and re-enter the movie. Has Apple offered a new download wit

  • Customer Broadcasting - EMail Bursting Broadcast with hierarchy

    Hi, At the moment I broadcast with the broadcast function email bursting to our customer. (single customer) I maintained a mail adress for each customer. Now we have a special demand. I should broadcast to customer groups. Customer Group is a special

  • How do i see what beta ver i'm at - deeper than Help | About Firefox - registry .. ?

    i am enrolled in the beta channel but because the notification popups are so quick i someties do not see that a new beta ver is available. i consult filehippo regularly to see what updates are out there but i want to have a way i can find what beta i

  • How to remove directories under Loops Search Setup?

    Hi, I want to move my sound effects loops to an external firewire drive to free up 20+ GB. In Soundtrack Pro when I go into Loops Search Setup, where the list of Directories being indexed is displayed, the "-" icon at the top for "remove directory" i

  • Rollback transaction

    Hi I posted in the wrong forum before and I repost it here. I have a method in session bean method to create 3 records in Table A through another session bean and 1 record in Table B through an entity bean. The methods are declared "Require", but it