Random crashes on Acer Aspire 5520 - keyboard and mouse death

Random crashes appear randomly,  no keyboard or mouse only thing I can make is power off.
I'm using xfce. I think problem is somehow related to power management??
If some configuration files are needed then I'll provide them.
Thanks in advance,
Tomi

Random crashes appear randomly,  no keyboard or mouse only thing I can make is power off.
I'm using xfce. I think problem is somehow related to power management??
If some configuration files are needed then I'll provide them.
Thanks in advance,
Tomi

Similar Messages

  • Crashes since I got new keyboard and mouse

    Recently picked up the new wireless keyboard and mouse after my old set finally died and once I got them both working I started to experience constant system crashes including restart messeges and random software just quitting out without cause. The iMac worked fine before I got teh new kb&m, but I ahve never heard of new accessories causing a computer to freak out like this. The computer is currently running Tiger. Any ideas?

    No one has a single idea?

  • IMac crashes since new keyboard and mouse arrived

    Recently picked up the new wireless keyboard and mouse after my old set finally died and once I got them both working I started to experience constant system crashes including restart messeges and random software just quitting out without cause. The iMac worked fine before I got teh new kb&m, but I ahve never heard of new accessories causing a computer to freak out like this. The computer is currently running Tiger. Any ideas?

    Suggest that you repost over in the Bluetooth Keyboard/Mouse Forums where the wireless folks hang out.
    Also, since you have an Intel iMac, you may wish to cross-post over in the Using your Intel-based iMac Forums.
    You should also indicate which version of Tiger you are using.

  • Keyboard and mouse randomly don't work after boot

    Hello there, I have been having a problem lately  with the keyboard. Some times after the booting process it doesn't work, forcing me to restart my laptop even 3 or 4 times before getting it to work properly.
    Here is the keyboard boot process. wich has actually a problem that I can't understand clearly.
    dmesg |grep keyboard
    [    2.308714] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
    [    2.959550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    I noticed this error during the boot preocess, how should it be interpreted?
    I'm sure in the kernel, the device atkbd is selected.
    The synaptics mouse instead, doesn't work properly in X
    My mouse is a synaptic touchpad and when I start x, instead of loading the synaptic device, xfce simply see it as ps/2. Also this happens randomly.
    dmesg |grep mouse
    [    2.098008] mousedev: PS/2 mouse device common for all mice
    [    4.836233] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    [    6.696381] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 631163
    Xorg conf:
    Section "inputdevice"
       identifier "synaptics touchpad"
       driver "synaptics"
        Option "TapButton1" "1"
        Option "TapButton2" "2"
        Option "TapButton3" "3"
    Endsection
    Any suggestion?

    Welcome to Apple Discussions!
    Has your keyboard and mouse quit working altogether or just when the computer is hot? And do I understand that an external keyboard and mouse will work with no problems?
    And I am wondering about your computer running unusually hot. Are your fans operating properly? You might want to run the extended version of the Apple Hardware test to be sure that the fans and thermal sensors are working properly. If they are not, you will get one or more error codes.
    Another thing to do to check when your Mac is unusually hot is the Activity Monitor. Select "All Processes" at the top right and check for any process running that should not be which is using lots of CPU.
    I don't know if the keyboard problem is related to the heat problem or not, but I would want to know what is causing the heat problem too. Over time, excessive heat can cause damage to the logic board. It could also conceivably damage the ribbon cable which connects the keyboard and I would guess that the trackpad could also be affected. So it is important to see what is going on here. If you have been experiencing excessive heat on a regular basis, this might be the underlying cause of your keyboard and trackpad problems. If so, the heat problem will have to be fixed or the other problem will recur over time.
    Try the AHT and post back with any results. Also, use iStatPro to check on your fans and make sure both are running at roughly equal speeds and that they run faster when the computer gets hot.
    Good luck!

  • Keyboard and mouse freeze randomly

    My keyboard and mouse freeze up for 2-4 seconds at seemingly random intervals.  I could go for a couple hours without it happening, or like now, it has happened twice while writing this.  If I'm typing something when it freezes, nothing I type while it's frozen ends up showing up, but if I had hit a key right when it froze, it will repeat itself until I press something else after it unfreezes.  They keyboard and mouse both freeze at the same time, it's not one or the other.  It has nothing to do with standby like the topic below...it can happen right after I boot up or anytime thereafter.
    My hardware is an eMachines M6805 laptop (upgraded to 2GB of RAM) and just a basic Dell USB mouse and keyboard.
    I tried searching the forums, but the search box on here searches the entire web for some reason even if I tell it to search TechNet, so I apologize if this has already been answered.

    I just had my Desktop freeze whilst I was using Media Player minimised to the taskbar.
    I came back to my PC and couldn't use the keyboard or mouse. I plugged in a wired USB mouse and this did not work either. I then used the mouse and keyboard buttons on my MCE remote and still nothing happened, actually something happened as my hard drive
    became very busy, but there was nothing happening on screen. I had to reboot to get back to normal operation.
    I use a Logitech Bluetooth MX500 keyboard and mouse and have been having problems since I had Windows 7, but thought it was the keyboard and mouse at fault. This is the first time that I have encountered this problem, but I have had problems with the keys
    sticking, very annoying when you're in Visual Studio and it goes and deletes a load of code for you because the backspace key was the one that stuck. The cursor also randomly jumps lines occasionally and inserts text where I don't want it. This wouldn't be
    such an issue if I was a touch typist and could look at the screen whilst typing, but I am not and only realise the errors when I have finished typing.
    Anyway, Mine is a custom built PC(all drivers and windows fully up to date) which ran XP with zero problems:
        Gigabyte mboard and graphics card (Nvidia) with I5 processor and 4GB ram.
    If this was a USB hub Powersave issue, then I would still expect the hub to wake up when a new device was pugged in, so I'm going to count that fix out.
    I'm not sure that the freezing was a mouse/keyboard fault, I suspect that this is more a video driver fault as the computer did become very busy doing something when I used the MCE remote, it's just the screen didn't update to show what it was doing.
    I should have looked at the taskbar clock to see if the time had updated, I'll do that next time if it happens again.
    I've disabled the Power Save options for the hub that controls the mouse and keyboard, perhaps this will stop the keys sticking and jumping around when I'm typing in Visual Studio.
    Mick Doherty
    http://dotnetrix.co.uk
    http://glassui.codeplex.com

  • Hi, I have Photoshop CS 6 Extended, but my laptop does not have a disk tray (acer aspire v5-573g) and I have the serial number, is there any way I can download this version of Photoshop I'm not sure what to do...

    Hi, I have Photoshop CS 6 Extended, but my laptop does not have a disk tray (acer aspire v5-573g) and I have the serial number, is there any way I can download this version of Photoshop I'm not sure what to do...

    You can download photoshop cs6 from here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • After updating to Mavericks, my macbook's keyboard and mouse randomly stops functioning for a brief period of time.

    my keyboard and mouse will randomly stop functioning. i have to wait 20 seconds for functionality to return. please help.

    Hi,
    I'm exactly having the same problem as described above running on Boot Camp v2.1 as well as Parallels latest version. My macbook will just hang on itself and i had to press the power button to restart. Is there any fix to this?
    Thanks.

  • I have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

    i have an acer aspire 5935 32bit and i cant download itunes as it just keeps freezing. can anybody help pls??

    Have you tried "Run" instead of "Save?"
    Do you have anti-virus software on the PC? If you do, try disabling the anti-virus for just 15minutes to allow the download to finish.
    Hope one of those helps.

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • Using USB Keyboard and Mouse with S6000-f Ideatab

    First you need a Microusb to USB adaptor pluged in, then plug in a usb hub I'm using a 4 port unpowered mini hub
    then plug in a usb keyboaed and mouse.  
    it works good in Kingsoft office and AndrOpen office or any app that needs you to type
    it does disable the touch pad keyboard, until you unplug the usb keyboard.  It's alot cheaper than a blue tooth keyboard
    I'm using a Samsung micro usb to usb connector model EPL-AU10WEGXAR
    Keyboards tested:  Dynex usb and Acer usb
    Mouse tested: Kingston usb
    Any usb keyboard and Mouse should work. 
    Also I tested a Thumb drive. Sandisk 8gig  it shows up in the file manager .
    So you dont have to use a MicoSD card.  The one thing  back up and restore only uses the MicroSD card slot.
    I havent found out how to change that yet. 
    I dont think any of this is in the Manual   I just like to share useful Info.

    hi jpwes,
    This is Great! This can help a lot of users of the same model,
    Nice and Solid review here!
    Thanks
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Keyboard and Mouse keep dying

    Dual 1.42 GHz PowerPC G4 with 1.5 GB DDR SDRAM.
    Apple Studio Display LCD 17" Monitor
    Mouse and keyboard are Apple products that came with the computer
    I've owned this machine for about 6 years and have never had any issues. I upgraded to Leopard about 3 months ago and things ran slower, but it still worked. In the last week, my keyboard and mouse will die at random times. Sometimes I have to power cycle the computer twice to get the mouse and keyboard working again. Even then, they quit working after about 10 minutes even after a power cycle. Anyone ever have this issue and know what I might do to correct it? I think it's odd that a keyboard would stop working.
    Message was edited by: dhaab1965

    Sounds like your USB buses are overloaded somewhere. There are a couple of things to check.
    1) Are you using a Griffin iMate ADB-to-USB adaptor to connect any older ABD keyboards or graphics tablets? I was, and I started having trouble when I moved to Tiger. Griffin says the input code changed at the system level and they cannot fix, stopping the iMate support at 10.3. I ask because when I got to Tiger with my iMate, I had sudden and unpredictable dropouts where no USB input device worked until I restarted.
    2) Are the keyboard/mouse connected through any USB ports on the display (can't remember what the Studio display has). If so, connect directly to a logic board USB port.
    3) Do you have any unpowered USB hubs in the system? Those often fail to provide enough power to keep the signal up.
    4) Dismount any USB flash drives and see it that helps.

  • Keyboard and Mouse Not Functioning

    Hello folks,
    I have a T60. Once Windows loads up, the internal keyboard and mouse do not function. They function before Windows loads (in Bios config, etc.) and the keys to turn on the spotlight work. An external USB keyboard and mouse work perfectly.
    As far as I know, this is completely random. It's driving me crazy.
    Any help would be appreciated.
    Thanks!
    Chris

    Chris, welcome to the forum,
    did the advice in the other thread you posted in yesterday not help? There is a link to  a possible solution in another thread here. You need to feed the boards with information; especially what you've tried, but didn't work - members get hungry
    What happens in safe mode? Does the keyboard et al work as expected? Have you tried deinstalling them in safe mode through device manager and then restarting?
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Odd bug: "keyboard and mouse" within "system preferences" will not open!!

    After having to Archive and Re-Install yesterday and installing "X11", I have an odd problem:
    - apple+i leads to crashing and restart of "Finder"
    - when investigating this I found the "keyboard and mouse" registry in "system preferences" will not open.
    Any ideas what could be wrong?
    Is there any other remedy short of another Archive and Re-Install?
    In the system library I have "Keyboard.prefPane" version 3.13. Clicking on it opens a blank "system preferences" page entitled "keyboard and mouse".
    Your help would be greatly appreciated!
    PowerBook G4 1.25 GHz   Mac OS X (10.4.9)  

    Reinstallation solved the problem.

  • Bluetooth keyboard and mouse failures

    I have brand new PowerBook G4 15" with Bluetooth. I also have brand new Bluetooth wireless Apple keyboard and mouse. I am running 10.4.5. The keyboard and mouse lose contact with the computer on a regular basis, even though they are right next to each other. Sometimes I get the error sign on the computer, sometimes not. Batteries are fresh. Reboot fixes problem. Apple tech support says "interference" might be problem, but I don't have anything nearby except Linksys wireless router. Any ideas?
    PowerBook G4 Mac OS X (10.4.5)
    PowerBook G4 Mac OS X (10.4.4)
    PowerBook G4 Mac OS X (10.4.5)

    Over the weekend my BT apple keyboard has been doing multiple strange things as well.
    First, the batteries died, something that, of course, happens from time to time. Replaced with the same brand/type as always.
    Later in the same weekend then I was typing and began suffering from a strange random keypress problem. Q for instance, began equaling 'ew' while space started equaling '['.
    Odd.
    I shelved the keyboard with the intent to call Apple today.
    Now I get home from work, reconnect the KB, and lo-and-behold, it works! I was thrilled. Now, after 3 hours of use, the same problems start back up. This is obviously therefore not a KB related issue but a software related issue or else it would now reliably do the same key oddities that it had been doing.
    I've trashed the BT preferences and am about to restart, but I don't think it's time to buy a new keyboard just yet for those of you having similar BT keyboard problems.

  • Monitor, Keyboard and Mouse sometimes stop Working

    I'm having an issue with my computer, it is a new build on a MSI 890FXA-GD65 motherboard. Sometimes randomly while i play a game, my monitor goes to sleep and wont wake up (monitor is connected via VGA port to my Radeon HD 5670 GPU), my keyboard and mouse turn off(both usb, mouse is Logitech, the red light on the bottom turns off), the computer still runs all the lights are on. Also, the front panel reset and power buttons wont work, the only way to shut it off is by the power switch on my power supply. Any ideas as to what might be the problem?

    Quote from: Svet on 21-July-11, 03:02:11
    Run CPU-Z http://www.cpuid.com/downloads/cpu-z/1.58-setup-en.exe
    and show screenshots from memory and spd pages
    Quote from: romie_rome on 29-July-11, 10:09:27
    It was set to 1333 by default, everything in BIOS regarding memory is on auto.
    By romie_rome at 2011-07-28
    By romie_rome at 2011-07-28
    Switch command rate to 2T in BIOS Setup,
    then retest

Maybe you are looking for

  • How to generate changes/ audit reports made on CLI in CSM 3.3.1

    Hi guys, I have a CSM 3.3.1 installed on a Windows Server 2003 SP2. I have manage a ASA firewall and I would like to track all the changes being made on the ASA firewall CLI via the CSM 3.3.1. Does anyone know how should I generate such report please

  • About LINT

    Hi, when I try to use the LINT tool to check the source file of my driver. It always return an error. That error is about the system header file. I don't know how to correct this error. The error message is : ucbcc: Warning: Option -YP,:/usr/ucblib/s

  • IS research request

    Dear Webmaster of Oracle forum, We are a researc group in the Information Systems area. We are currently embarking on an exciting project that is aimed at helping Information Technology (IT) and Information System (IS) professionals keep up-to-date k

  • Greying exchange rate fixed

    Dear Gurus I want to make exchange rate fixed field grey of the delievery/invoice tab. please tell me the procedure to grey this field of the po. Regards

  • Unable to open folders through cairo-dock

    The quick browser icon in my Cairo dock is pointing to my home directory and when I click on it, it shows all the folders inside that directory. But I am neither unable to open the directory nor any of the folders inside. I don't know if this is rela