Random EDGE service
For the last two days I have rarely had EDGE service (No internet or visual voicemail). I have had the phone since they came out in June and had no trouble until 2 days ago. When I have no EDGE service my wife's phone will work just fine.
I have:
reset the network settings
reset all settings
soft reboot
restored all under iTunes
I also went through Apple's online support which included switching to Airplane mode for 15 seconds and back and resetting the SIM card. Sometimes EDGE will come back after doing a reset and waiting 15 minutes but then it goes away after a while.
Time to go back to the Apple store?
Exact same problem here. Noticed that the E symbol was showing up sporadically the other day and assumed it was a network issue.
Now I have no EDGE or GPRS data connection (no E symbol and no square). Haven't had an EDGE connection for about 2 days now.
My partner's iphone is not having the same issue. I had no EDGE at home last night and his had a connection the whole time, even when the phones were sitting next to each other.
I've tried power-cycling, resetting, and even a full restore with no luck, and am assuming it's a hardware issue.
I'm taking it in to the Apple store tonight - I'll post a follow-up if they are able to figure it out (or not).
Similar Messages
-
Can't Start Edge Services - Certificate Issue?
Similar to this
post, my edge services (a/v edge, web conferencing edge, etc) will not start with errors like 7023 and 7024. I went to the
Digicert Utility page linked in that post and if I enter sip.domain.com, I receive an error:
Certificate does not match name sip."domain".com
Subject
"edgeservername"."domain".com
Valid from 31/Jul/2012 to 31/Jul/2014
Issuer
"Internal CA Server"
SSL Certificate is not trusted
External Cert Info:
Subject: sip."domain".com
SANs: sip."domain".com, "edge server name"."domain".com, meet."domain".com, "av server"."domain".com, "wc server"."domain".com, dialin."domain".com
Let me know if more information about the cert or the edge server is needed. Thanks!The two DigiCert High Assurance Root CA certificates should not be in the Personal Store, but installed in the "Trusted Root Certification Authorities". I would also recommend double checking the the Current User's personal certificate store .
Have you installed the DigiCert Utility on the Edge server and tested the certificates (https://www.digicert.com/util/)?
This tool checks the certificates from the perspective of the server.
The http://www.digicert.com/help/ site checks the certificates from the perspective of an external client. If the Utility is
showing the certificates are correct but the Help site still shows the error, make sure your sip.domain.com IP is pointing to the Edge Access IP and not the Reverse Proxy.
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
The Lync Server Access Edge service not starting (ipconfig / certificate problem?)
hey guys,
I am trying to install lync server 2010 for the first time. After installing everying i have a problem on the edge server, the Lync Server Access Edge services doesn't want to start and is giving specific error:
The Lync Server Access Edge service terminated with service-specific error %%-2146762480.
i have searched in the forums, i only read that it might have something to do with the ip config or the certificates, but i have no idea what exactly.
I have the following servers:
sql server (domain member)
Archive server (domain member)
Monitoring server (domain member)
and the edge server (not a domain member)
this edge server has two nics, one with a internal address and one with a public address.
for the internet side i used an internal AD CA for a certificate, for the external side i used a go daddy certificate.
does anyone has any idea? i am happy to provide additional information.
thx, JWHey Tim,
thanks for helping me. I am using one IP address externally. And if i understand correctly i am using port 443, 444 and 5061 (as suggested automatically by the topology builder)
internally i used an internal CA and external i used a godaddy multidomein certificate, as we are planning to use multiple domains on it. i used the wizard from the setup. i ran a request. In the wizard i see then the follwing Subject names and
subject alternate names:
sip.domain1.xx
webconf.domain1.xx
and then in the next screen i can check other domains, so i checked also the other domains:
domain2.xx
domain3.xx
domain4.xx
domain1.xx (also the first domain is here and i checked it to be sure)
while i was gathering this information i noticed that the certificate wizard says that the external ede certifciate status = invalid. So there is my problem mostlikely. Although i do not understand why it is invalid.
So when using 1 ip address externally you will need to change the ports in your topology.
Under Edge Pools - > Right click your edge pool and click edit, down near the bottom make sure "Enable seperate FQDN and ip address for web etc...) is UNCHECKED.
the first FQDN, sip.domain.com port 443(TLS), the other 2 for webconf and av just change the port numbers. so when you request your 2 certs the only names will be the pool FQDN and sip.domain and your other sip domains. on your router/gateway open the 3
ports you selected from Outbound -> Inbound. for your external DNS sip.domain -> external IP address going to your firewall/gateway.
note that your edge server is not on the domain so you will need to edit your hosts file and add your frontend pool/server internal ip address and FQDN server name.
When you get "invalid" for the certificate what cert is it? the internal CA or GoDaddy? -
Lync front end - Lost Connection to all Web Conferencing Edge Services
I keep getting the error Lost Connection to all Web Conferencing Edge Services on my lync front end server 2010
The lync edge services are all starte the certs are fine and I disable ipv6
Anything else I can tryHi,
Did you solve the issue with the help of the people above provided?
Which type of certificate did you use for Edge server (both internal and external interface)?
Please double check Edge server certificate with the help of the link below:
http://www.technotesblog.com/2011/07/06/lync-server-2010-error-lost-connection-to-all-web-conferencing-edge-services/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Please try to restart Edge server and test again.
Please also check the part of certificate configuration of Edge server with the help of the link below of “Useful Tips for Testing Your Lync Server 2010 Edge Server”:
http://blogs.technet.com/b/nexthop/archive/2011/12/07/useful-tips-for-testing-your-lync-edge-server.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
MS Edge services wont start on exchange 2007 installation on a server 2008 r2 in a 2003 domain
Hi
I had a previous installation of exchange 2007 vanilla that I had to delete because of some errors on the nic card in a 2003 exchange environnement migration preparation. I've build a brand new 2008 R2 and i'm trying to install a new exchange 2007 SP1. When
the service edge try to start it seems that it doenst want to get install. I've disable IPV6 from the nic and still the same problem. Is there something that need to be removed in the AD because of my previous 2007 installation ?
thanksHi,
I find this for your reference:
I would install Exch 2007 with SP3 slipstrreamed. The download for SP3 is the full installation of Exchange. The fact that Exch 2007 with SP1 is not R2 compatible, you will run into problems.
http://www.microsoft.com/downloads/details.aspx?FamilyID=1687160b-634a-43cb-a65a-f355cff0afa6&displaylang=en
"Clean installations of Exchange 2007 SP3 on a new server are possible by using this download in the same manner as you would install Exchange 2007 RTM, Exchange 2007 SP1 or Exchange 2007 SP2.
More details in the following similar thread:
Exchange Server 2007 SP3
http://social.technet.microsoft.com/Forums/en-US/03e7cabd-a002-4920-b2f7-d6d1dd61c76f/exchange-server-2007-sp3?forum=exchangesvrdeploylegacy
Thanks
Mavis Huang
TechNet Community Support -
Random Edge.3.0.0 Error Appears: Uncaught HierarchyRequestError
I'm using the CDN (http://animate.adobe.com/runtime/3.0.0/edge.3.0.0.min.js) for Edge's lib and find this error randomly being presented to me from the console.
“Uncaught HierarchyRequestError: A Node was inserted somewhere it doesn't belong”
Why does this error report randomly from the edge.3.0.0 lib script? It's not frequently showing itself enough to allow for proper debugging.Hi Sarah,
I can share it, but only privately. It's password protected for a client atm. I'd be happy to send you this info via email. Would that be possible? -
Random "No Service" after updating to 3.1.3
This is my first post, so please be gentle!
So here is my issue. I was reluctant to upgrade to 3.1.3 as I had heard some people were having slow data throughput on the TELUS network in Toronto. But last week, I figured WTH?! Let's do it.
I regret now. Since upgrading to 3.1.3, my iPhone randomly will go into No Service while I am at my home and usually when it is in SLEEP mode. So far this is the only location where is happens (thank god), but the concern is that this has NEVER happened before on 3.1.2. Coincidentally, the issue usually happens when connected to WIFI as well, and no, I am not actually having the same issue ith data speeds... Just No Service @ all. Let's go through the troubleshooting I did before coming here:
- Soft reset and pulled the SIM out and back.
- Settings > General > Reset > Reset Network Settings (I've done this too much for it to be normal. At least once a night)
- Full restore of OS (I deleted the *.ipsw file from my computer to make sure that iTunes downloaded a fresh copy.)
My iPhone is in impeccable condition and has only been dropped once with its case on. I also want to REALLY emphasize that my phone is NOT JAILBROKEN. This is happening on an untampered OS. I also have full signal in my house and am in line of sight of a cell site. Once I do reset my settings and restart the device, I get full service until the next random incident.
If anyone can help me with this it would be AWESOME... Its frustrating to have to reset my device and network settings at least once a day.
Thanks!
~TomNot a bug. If a bug, the overwhelming majority of users would be experiencing the same, which is not the case.
Copied from my previous post, which you apparently missed.
+When you restored your iPhone with iTunes, did you restore from your iPhone's backup or as a new iPhone or not from your iPhone's backup?+
+If the former only, try the latter. If there is a problem with your iPhone's backup, restoring from the backup will also restore the problem.+
+If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, try getting a new SIM card from your carrier to eliminate a potential problem with your existing SIM card. If no change after that, contact AppleCare or make an appointment at an Apple store if there is one nearby. The iPhone includes a one year warranty.+ -
EDGE service disconnects automatically
we are using blackberry handeset to acess internet and email service on handset so EDGE connection suddenly diconnected after some time . so pls help me
Hi
plz check the below solutions.
1. BB provisoing is not activate properly
2.BB is not unlocked properly
3.There is a Network proplem in Your area kindly check different location chk the same issue will be happened or not.
4. chk the data service is on in network.
5.check your put any roaming related restriction
Regards,
Areevam
please mark posts as solved if you found a solution. feel free to press the kudos button to thank the user that helped you -
BI Publisher (Obiee 11g) Scheduled jobs start randomly after services restarting
Hi everybody,
I've a problem with scheduled jobs on BI Publisher that start randomly after server restarting.
For example if there's a job scheduled every day at 8.00 am it works fine until the server is not restarted but when I restart it next job running start at 9.28 am (it is an example because the real start time is very unpredictable).
In my case bi publisher is integrated with obiee 11g (11.1.1.6.2) and I've scheduled jobs with administrative user (weblogic). For this user I've set the Bi Publisher Preferences (report locale = Italiano-Italia, Report Time Zone = GMT +1:00) from obiee analytics user account preferencies.
Can anyone have this problem too and help me?
Thanks
AnnalisaThese are not helpful. The first link is to OBIEE 10g and the second is just an install guide. I am having the same issue with BI Publisher returning java.lang.NullPointerException in OBIEE 11g. Any help would be appreciated. Thanks,
Paul
Edited by: pneedleman on Nov 17, 2010 10:15 AM -
IPhone Randomly Losing Service
More and more frequently my iPhone is loosing service in areas I normally have it. I will just pick it up and notice that in the upper left hand corner it will say "no service". Once I shut down and reboot, the service bars are where they should be. Any ideas on why this is happening? Is it happening to anyone else? It just ***** because I never know that it has lost service until I look at the phone and there have been several occasions where I have missed many calls or text messages-- very frustrating!
I'm having the same problem, but only at home and within a mile of my house. At my office or other places it works fine. ATT has done nothing but make me angry about the issue. It has been 10 days since I first called in about it. It has escalated to the point that I had a critical case that they claim is being resolved today. It is 10:30 PM and my 3g service still comes and goes when at home.
I'm so sick of ATT and I'm hoping Verizon will be even a tiny bit better and able to admit that their network has faults....unlike ATT. -
Lync Edge Services Won't Start
I read a lot about thee problems others faced but none of them solved my issues . in the event viewer here are the problems.
LS Protocol Stack : Unable to bind for socket.
Transport:TLS, IP address:77.42.220.238, Port:5061. Error:0x80072741 (The requested address is not valid in its context.).
Resolution:
Ensure that no other program is listening to the specified port and that the IP address is valid.Log Name: Lync Server
Source: LS Protocol Stack
Date: 4/14/2015 5:31:34 PM
Event ID: 14346
Task Category: (1001)
Level: Error
Keywords: Classic
User: N/A
Computer: lyncedge.domtech.org
Description:
Unable to bind for socket.
Transport:TLS, IP address:77.42.220.238, Port:5061. Error:0x80072741 (The requested address is not valid in its context.).
Resolution:
Ensure that no other program is listening to the specified port and that the IP address is valid.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Protocol Stack" />
<EventID Qualifiers="50153">14346</EventID>
<Level>2</Level>
<Task>1001</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T14:31:34.000000000Z" />
<EventRecordID>992</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>lyncedge.domtech.org</Computer>
<Security />
</System>
<EventData>
<Data>TLS</Data>
<Data>77.42.220.238</Data>
<Data>5061</Data>
<Data>0x80072741</Data>
<Data>The requested address is not valid in its context.</Data>
</EventData>
</Event>
LS Protocol Stack : A configured transport has failed to start.
Transport TLS has failed to start on local IP address 77.42.220.238 at port 5061.
Cause: Configuration error, low system resources or another program is using the specified port. Can also happen if the IP address has become invalid.
Resolution:
Ensure that the IP address specified is valid and that no other program is listening on the specified port.Log Name: Lync Server
Source: LS Protocol Stack
Date: 4/14/2015 5:31:34 PM
Event ID: 14336
Task Category: (1001)
Level: Error
Keywords: Classic
User: N/A
Computer: lyncedge.domtech.org
Description:
A configured transport has failed to start.
Transport TLS has failed to start on local IP address 77.42.220.238 at port 5061.
Cause: Configuration error, low system resources or another program is using the specified port. Can also happen if the IP address has become invalid.
Resolution:
Ensure that the IP address specified is valid and that no other program is listening on the specified port.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Protocol Stack" />
<EventID Qualifiers="50153">14336</EventID>
<Level>2</Level>
<Task>1001</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T14:31:34.000000000Z" />
<EventRecordID>993</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>lyncedge.domtech.org</Computer>
<Security />
</System>
<EventData>
<Data>TLS</Data>
<Data>77.42.220.238</Data>
<Data>5061</Data>
</EventData>
</Event>
LS Server : The protocol stack reported a critical error: code 80072741 (The requested address is not valid in its context.). The service has to stop.Log Name: Lync Server
Source: LS Server
Date: 4/14/2015 5:31:34 PM
Event ID: 12303
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: lyncedge.domtech.org
Description:
The protocol stack reported a critical error: code 80072741 (The requested address is not valid in its context.). The service has to stop.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12303</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T14:31:34.000000000Z" />
<EventRecordID>994</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>lyncedge.domtech.org</Computer>
<Security />
</System>
<EventData>
<Data>80072741</Data>
<Data>The requested address is not valid in its context.</Data>
</EventData>
</Event>
LS Protocol Stack : Unable to start the stack.
Error: 0xC3E93C0A (SIP_E_STACK_TRANSPORT_FAILED)Log Name: Lync Server
Source: LS Protocol Stack
Date: 4/14/2015 5:31:34 PM
Event ID: 14352
Task Category: (1001)
Level: Error
Keywords: Classic
User: N/A
Computer: lyncedge.domtech.org
Description:
Unable to start the stack.
Error: 0xC3E93C0A (SIP_E_STACK_TRANSPORT_FAILED)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Protocol Stack" />
<EventID Qualifiers="50153">14352</EventID>
<Level>2</Level>
<Task>1001</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T14:31:34.000000000Z" />
<EventRecordID>995</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>lyncedge.domtech.org</Computer>
<Security />
</System>
<EventData>
<Data>0xC3E93C0A</Data>
<Data>SIP_E_STACK_TRANSPORT_FAILED</Data>
</EventData>
</Event>
Any Help Would be apreciated , Thanks !Hi , Thanks for helping.
The ip 77.42.220.238 is not directly assigned . one of the NICs (the one with default gateway) has an ip 192.168.16.133 and this ip is on dmz on the firewall server.
Is there something wrong with this configuration ?
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : lyncedge
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n #2
Physical Address. . . . . . . . . : 00-50-56-AC-1B-77
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f18d:359b:1d9b:2544%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.16.133(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 369119318
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1C-AE-6E-57-00-50-56-AC-0B-CD
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 00-50-56-AC-0B-CD
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6d50:4e3f:fc9c:602d%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.16.111(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : 77.42.220.238(Duplicate)
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Default Gateway . . . . . . . . . : 192.168.16.1
DHCPv6 IAID . . . . . . . . . . . : 251678806
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1C-AE-6E-57-00-50-56-AC-0B-CD
DNS Servers . . . . . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{90E4A645-CCFD-4E7E-909B-93EA2B2065FB}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0E4827CF-DA02-4AB0-866E-775D7AF9BA63}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes -
ipad 1 having network issues...
Hi there,
It sounds like you have already performed a majority of the steps listed in the article below, but you may still want to at some of the troubleshooting listed.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, orcontact AppleCare to troubleshoot further.
-Griff W. -
Macbook random shutdown service log
[IMG]http://img148.imageshack.us/img148/5796/macbooklk8.png[/IMG]
anyone know what "on hold, part on order" mean?I just got my logic board replaced. MB was back in three days.
Where did you send yours? Flextronics in Tennesee?
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group -
Random Internet Service Lag/Dropout
About once an hour or so (on average), my internet just drops out for a few seconds... if I'm playing WoW, it comes off as a lag spike that lasts about 5-10 seconds, and if I'm browsing it'll give me 5-10 seconds of "Web site not found" messages until it kicks in again. This has been happening for a little while now, and I was wondering if there was anything I could do, before I go calling Tech Support.
I've got three computers up and running in the house, and whenever the lag spike/dropout happens, it happens on any computers that might be on. Most commonly, my roommate and I are playing WoW together, and we get these lag spikes at the exact same time every single time.Mattimus_Prime wrote:
N+. I've been trying to find somewhere in its setup page where to set the Maximum Number of Ports, and TCP/UDP timeouts, because I'm very confident that's where the problem is, but it's just not anywhere I can find.
#1 You mean this
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=459640
#2 If so in your Belkin F5D8235-4, go to LAN Settings.
#3 What is the DHCP range on your router?
#4 If you setup a Static IP on your computer...
http://www.portforward.com/networking/staticip.htm
..what IP Address did you setup?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Lync Edge Server Service Not Starting
i am having an issue with starting the "Lync Server Audio/Video Edge" service on my lync edge server. when i try to start the service it throws the following error..
"The Lync server audio/video edge service on local computer started and than stopped. some services stop automatically if they are not in use by other services or programs."
than in the event viewer logs there are 2 specific errors i can see that look like the following..
what is stopping me from fixing this right away is that i havent changed anything in my configuration, seems to have broke on its own. i can post more errors i have found in other places as well if needed. any help is greatly appreciatedhey sean, thanks for your response. all things point to something else using port 443 right now.. however from what i can see from a netstat command it doesnt look like anything new is running on it. here is a copy/paste of my most recent netstat command..
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 756
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING 2804
TCP 0.0.0.0:4443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 468
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 844
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 896
TCP 0.0.0.0:49338 0.0.0.0:0 LISTENING 1400
TCP 0.0.0.0:56483 0.0.0.0:0 LISTENING 572
TCP 0.0.0.0:56966 0.0.0.0:0 LISTENING 564
TCP 0.0.0.0:56967 0.0.0.0:0 LISTENING 2824
TCP 192.100.100.84:139 0.0.0.0:0 LISTENING 4
TCP 192.100.100.84:444 0.0.0.0:0 LISTENING 1768
TCP 192.100.100.84:5061 0.0.0.0:0 LISTENING 1908
TCP 192.100.100.84:5061 68.34.170.246:52296 CLOSE_WAIT 1908
TCP 192.100.100.84:5061 68.34.170.246:52297 CLOSE_WAIT 1908
TCP 192.100.100.84:5061 68.34.170.246:53570 CLOSE_WAIT 1908
TCP 192.100.100.85:5061 0.0.0.0:0 LISTENING 1908
TCP 192.100.100.85:5062 0.0.0.0:0 LISTENING 1844
TCP 192.100.100.85:5062 192.100.100.83:53701 ESTABLISHED 1844
TCP 192.100.100.85:5062 192.100.100.83:53967 ESTABLISHED 1844
TCP 192.100.100.85:8057 0.0.0.0:0 LISTENING 1768
TCP 192.100.100.85:8057 192.100.100.83:56612 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56617 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56618 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56619 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56620 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56628 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56629 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56670 ESTABLISHED 1768
TCP 192.100.100.85:57577 192.100.100.146:5357 TIME_WAIT 0
TCP 192.100.100.85:57579 192.100.100.175:5357 TIME_WAIT 0
TCP 192.100.100.85:57583 192.100.100.159:5357 TIME_WAIT 0
TCP 192.100.100.85:57584 192.100.100.147:5357 TIME_WAIT 0
TCP 192.100.100.85:57585 192.100.100.242:3911 TIME_WAIT 0
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:135 [::]:0 LISTENING
756
TCP [::]:443 [::]:0 LISTENING
4
TCP [::]:445 [::]:0 LISTENING
4
TCP [::]:3389 [::]:0 LISTENING
2804
TCP [::]:4443 [::]:0 LISTENING
4
TCP [::]:47001 [::]:0 LISTENING
4
TCP [::]:49152 [::]:0 LISTENING
468
TCP [::]:49153 [::]:0 LISTENING
844
TCP [::]:49154 [::]:0 LISTENING
896
TCP [::]:49338 [::]:0 LISTENING
1400
TCP [::]:56483 [::]:0 LISTENING
572
TCP [::]:56966 [::]:0 LISTENING
564
TCP [::]:56967 [::]:0 LISTENING
2824
TCP [2002:c064:6454::c064:6454]:4443 [2002:c064:6453::c064:6453]:54033 ESTABLISHED 4
TCP [2002:c064:6454::c064:6454]:57581 [2002:c064:64ab::c064:64ab]:445 ESTABLISHED 4
TCP [2002:c064:6454::c064:6454]:59957 [2002:c064:640c::c064:640c]:445 ESTABLISHED 4
UDP 0.0.0.0:123 *:*
948
UDP 0.0.0.0:500 *:*
896
UDP 0.0.0.0:1434 *:*
1976
UDP 0.0.0.0:4500 *:*
896
UDP 0.0.0.0:5355 *:*
140
UDP 127.0.0.1:51664 *:*
1172
UDP 127.0.0.1:56155 *:*
2924
UDP 127.0.0.1:59005 *:*
964
UDP 127.0.0.1:62503 *:*
1680
UDP 127.0.0.1:62786 *:*
572
UDP 127.0.0.1:62788 *:*
140
UDP 127.0.0.1:64531 *:*
896
UDP 127.0.0.1:65160 *:*
1844
UDP 192.100.100.84:137 *:*
4
UDP 192.100.100.84:138 *:*
4
UDP [::]:123 *:*
948
UDP [::]:500 *:*
896
UDP [::]:1434 *:*
1976
UDP [::]:4500 *:*
896
UDP [::]:5355 *:*
140
Maybe you are looking for
-
Reports XI: Infoview behavior with Row Level Security
Post Author: pwilliamsbssp CA Forum: General I have a report that is based off a business view that has project information with an additional table used to assign report users to certain clients (each project has a client). A filter is used to assi
-
No VPN again after Mavericks 10.9.2 and Server 3.0.3 update
After upgradeing my VPN stopped working again. Same behaviour as befor Apple rolled out the VPN Fix for Mavericks. Konfig on all VPN Devices I use remained unchanged. Anyone experiencing this as well? Best Stefan
-
I have a first generation ipad and find i cannot now run ibooks as i need an earlier version but cannot find any clickable tabs on the ibooks download page that i am directed to ?
-
Why won't voice generated text not display as I speak?
Why won't voice generated text not display on the screen as I speak?
-
Help! I just put windows on my mac and now i cant switch back to osx. Did i delete it or?
I just installed windows on my macbook Pro, but i could only install it on the. Boot camp driver. Cuz thats the only one that would format to NTFS. Now that i installed windows, i cannot switch back to osx. If i didnt delete or completely remove osx,