Random Questions crash

Hi
I'm trying to use the Random Questions in Captivate3 using
built up pools of questions, every time I try to preview the
project it loads 25% and stays there for ever (hold the project).
Has any one come across a solution to this problem?
Thanks
Anahad

Hi,
How big is the question-pool that you are trying to publish ?
Ideally a pool in CP3 should not have more that 15-20 questions, Also the project itself should not have more that 40-50 slides.
To check if this is a bug or not try out the following steps :-
1) copy 2 questions from your pool.
2) close the project.
3) create a new project.
4) open quiz pool manager.
5) paste the questions to the default pool.
6) add couple of random questions in the project.
7) preview and check
Manoj

Similar Messages

  • When I attempt to sign up for the Samsung website using Firefox on my macbook, it returns an error that the random question answer is wrong

    I was attempting to create a user at this site:
    http://www.samsunggalaxys3forum.com/forum/register.php?do=addmember
    It asks a "random" questions "Floors are horizontal, walls are ___?" When I hit submit, it returns an error that the answer was wrong. I tried several times using my macbook running firefox.
    I get to work, where I am using an intel based machine running Windows 7, IE 9 and am able to register on the site and answer the question with no problem.
    I have had the same problem on sites that use captcha - I cannot get past inputting the captcha phrase, as it returns an error every time, while using IE9 is problem free.
    Is there something wrong with my setup of Firefox?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Two random questions

    hey guys.. i have two random questions..
    1) when you recalibrate your battery... after you drain the computer and leave it for 5 hours.. when you RECHARGE IT (before its fully recharged) are you allowed to use it? or are you only allowed to use the macbook AFTER it's recharged... (because in the instructions it only talks about using it for the 2 hours AFTEr it's rechaarged)
    2) also... i always wondered if there was a better alternative between amc the ripper and handbrake (since mac the ripper apparently can rip different region coded dvds)... but ir ealised mac the ripper does FULL dvd rips whilst handbrake converts it into like mp4 and stuff... is that true? (as in.. u cant do vice versa on each?)
    thanks a buncho everybody! go the mac..

    2) I use handbrake if I am planning on watching the
    DVD on my ipod etc and Mac the Ripper to copy
    (Backup) full DVDs. Obviously I do this in America as
    it's illegal for some reason in the UK.
    It is illegal in the US too. Seems "fair use" does not apply to DVDs and disabling the copy protection (which you do when you rip your DVD via mac the ripper or handbrake) is against the law.

  • Some random questions about integration features

    Greetings,
    after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
    1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
    2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
    3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
    Thanks for any assistance with these issues

    As always, thanks for the fast answer, Artash.
    Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
    Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

  • Publishing w/ Random Questions

    Hi,
    I am using random questions in one of my programs and about
    to send it off to the client. This client has Captivate and would
    like for me to send the CP files. My question is, if I send the CP
    file for the program, will the random questions in the pool go with
    it? If not, how do I get them there?
    Many thanks for your help!

    Hi gbcvette
    Yes, your random questions would be contained inside the .CP
    file.
    Cheers... Rick

  • Random Panic Crashes

    Hello everyone,
    I have had random panic crashes for a couple of weeks. Black screen, my computer totally frozen. It's a MacBook pro 15", from May 2010.
    I let you see the panic report created, because I just can't see what's wrong!
    Thank you for your help,
    Tangi.
    Interval Since Last Panic Report: 46703 sec
    Panics Since Last Report: 2
    Anonymous UUID: C81E7FC8-FED5-4166-9251-ED061B50B2C8
    Thu Mar 31 15:23:13 2011
    panic(cpu 0 caller 0x9eec8f): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f77c000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5c291c38 : 0x21b510 (0x5d9514 0x5c291c6c 0x223978 0x0)
    0x5c291c88 : 0x9eec8f (0xc0423c 0xc74840 0xc133cc 0x0)
    0x5c291d28 : 0xb095d3 (0x9303804 0x9524004 0x100 0x19)
    0x5c291d78 : 0xb005cc (0x9524004 0x100 0x5c291da8 0x9de76c)
    0x5c291da8 : 0x16b6965 (0x9524004 0x100 0x438004ee 0x0)
    0x5c291ee8 : 0xb28250 (0x9524004 0x93b4004 0x0 0x0)
    0x5c291f28 : 0x9f7e23 (0x9524004 0x93b4004 0x0 0x0)
    0x5c291fc8 : 0x9f4502 (0x0 0x9 0x0 0x0)
    0x5c292178 : 0x9f668e (0x0 0x600d600d 0x7027 0x5c2921a8)
    0x5c292248 : 0xc9fa25 (0xc1d00040 0xbeef0003 0xadf0900 0x71)
    0x5c2922e8 : 0xc9ff9d (0x4634f000 0xadf0900 0xadf2804 0x0)
    0x5c292328 : 0xc77e0b (0x4634f000 0xadf0900 0xadf2804 0x0)
    0x5c292358 : 0xc9f5d2 (0x4634f000 0xadf0900 0xadf2804 0xcc0aea)
    0x5c292378 : 0xc77418 (0x4634f000 0xadf0900 0xadf2804 0xffffffff)
    0x5c292398 : 0xc9ff48 (0x4634f000 0xadf2800 0xffffffff 0x6d58)
    0x5c2923d8 : 0xc7a7b9 (0x4634f000 0xadf2800 0x0 0x0)
    0x5c292418 : 0xc78269 (0x4634f000 0x46520000 0x4630b000 0x8f73a40)
    0x5c292468 : 0xccaddf (0x4634f000 0x46520000 0x4630b000 0x8f73a40)
    0x5c2924f8 : 0xcbc5a9 (0x8f73a40 0xae21800 0x0 0x1)
    0x5c292558 : 0xcbc810 (0x46520000 0x4652077c 0xae21800 0x0)
    0x5c2925a8 : 0xcbcce4 (0x46520000 0x4652077c 0x5c2928cc 0x5c29286c)
    0x5c2928e8 : 0xcb9aaf (0x46520000 0x4652077c 0x1 0xa252000)
    0x5c292908 : 0xc815a1 (0x46520000 0x4652077c 0x0 0x0)
    0x5c292938 : 0xcbb572 (0x46520000 0x5c292a7c 0x7e2ff6a8 0x465200c8)
    0x5c292978 : 0xc858de (0x46520000 0x5c292a7c 0xc4 0x20000001)
    0x5c292ab8 : 0xcbeee6 (0x46520000 0x0 0x5c292bcc 0x5c292bc8)
    0x5c292b68 : 0xc81c93 (0x46520000 0x0 0x5c292bcc 0x5c292bc8)
    0x5c292be8 : 0x56a738 (0x46520000 0x0 0x5c292e3c 0x5c292c74)
    0x5c292c38 : 0x56afd7 (0xd10020 0x46520000 0xa001e88 0x1)
    0x5c292c88 : 0x56b88b (0x46520000 0x10 0x5c292cd0 0x0)
    0x5c292da8 : 0x285be0 (0x46520000 0x10 0xa001e88 0x1)
    0x5c293e58 : 0x21d8be (0xa001e60 0x9e475a0 0x1fd7e8 0x5d43)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.apple.GeForce(6.2.6)@0xc76000->0xd2bfff
    dependency: com.apple.NVDAResman(6.2.6)@0x988000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x97b000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x959000
    com.apple.nvidia.nv50hal(6.2.6)@0x1580000->0x1994fff
    dependency: com.apple.NVDAResman(6.2.6)@0x988000
    com.apple.NVDAResman(6.2.6)@0x988000->0xc75fff
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
    dependency: com.apple.iokit.IONDRVSupport(2.2)@0x97b000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x959000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 111648439718
    unloaded kexts:
    (none)
    loaded kexts:
    org.virtualbox.kext.VBoxNetAdp 3.2.8 - last loaded 27042008498
    org.virtualbox.kext.VBoxNetFlt 3.2.8
    org.virtualbox.kext.VBoxUSB 3.2.8
    org.virtualbox.kext.VBoxDrv 3.2.8
    foo.tun 1.0
    foo.tap 1.0
    com.Cycling74.driver.Soundflower 1.5.2
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.InternalModemSupport 2.6.2
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AppleUpstreamUserClient 3.5.4
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AudioAUUC 1.54
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleIntelHDGraphics 6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelYonahProfile 14
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.AppleIntelNehalemProfile 11
    com.apple.driver.AppleIntelMeromProfile 19
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleGraphicsControl 2.8.68
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.GeForce 6.2.6
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.AppleUSBCardReader 2.5.8
    com.apple.driver.AppleIRController 303.8
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AirPortBrcm43224 427.36.9
    com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBEHCI 4.1.8
    com.apple.driver.AppleUSBUHCI 4.1.5
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleHDAPlatformDriver 1.9.9f12
    com.apple.driver.AppleHDAHardwareConfigDriver 1.9.9f12
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.NVDAResman 6.2.6
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
    com.apple.iokit.IOBluetoothFamily 2.4.0f1
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.iokit.IOUSBMassStorageClass 2.6.5
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleFileSystemDriver 2.0
    com.apple.driver.AppleUSBMergeNub 4.1.8
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IO80211Family 314.1.1
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.iokit.IOUSBFamily 4.1.8
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 12 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK5055GSXF, 465,76 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
    USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000
    Message was edited by: tangi.leboucher

    No, I'm not using any external display.
    Actually I have totally re installed my MacBook Pro, in order to uninstall those kernel extensions.
    But I have had one freeze every day on average since that...
    Here is my last kernel report :
    Interval Since Last Panic Report:  98626 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    7CF8D62B-0102-4DC0-8BDC-AC04CA7DA993
    Mon Jun  6 21:07:26 2011
    panic(cpu 0 caller 0x9cdc8f): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f486000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5c0da188 : 0x21b510 (0x5d9514 0x5c0da1bc 0x223978 0x0)
    0x5c0da1d8 : 0x9cdc8f (0xbe323c 0xc53840 0xbf23cc 0x0)
    0x5c0da278 : 0xae85d3 (0x9597404 0x88b8004 0x100 0x0)
    0x5c0da2c8 : 0xadf5cc (0x88b8004 0x100 0x5c0da2f8 0x9bd76c)
    0x5c0da2f8 : 0x16c8965 (0x88b8004 0x100 0x438004ee 0x0)
    0x5c0da438 : 0xb07250 (0x88b8004 0x95b4004 0x0 0x0)
    0x5c0da478 : 0x9d6e23 (0x88b8004 0x95b4004 0x0 0x0)
    0x5c0da518 : 0x9d3502 (0x0 0x9 0x0 0x0)
    0x5c0da6c8 : 0x9d5536 (0x0 0x600d600d 0x702b 0x5c0da6f8)
    0x5c0da798 : 0xc987bc (0xc1d00041 0xbfef0033 0xbfef0034 0x857c)
    0x5c0da808 : 0xca802a (0x1400a800 0xb67f400 0x8 0x0)
    0x5c0da828 : 0xcccc16 (0xb67f400 0xb 0x5c0da848 0x0)
    0x5c0da858 : 0xccd431 (0x9982000 0x0 0x5c0da87c 0x0)
    0x5c0da888 : 0xcad66d (0x9982000 0x52a81080 0x0 0x0)
    0x5c0da8d8 : 0xc6f6ee (0x46542000 0x0 0x0 0x3)
    0x5c0da948 : 0xc6edf9 (0x46542000 0x0 0x2 0x3)
    0x5c0da978 : 0xc64ca7 (0x46542000 0x0 0x2 0x46503000)
    0x5c0daab8 : 0xc9dee6 (0x46503000 0x0 0x5c0dabcc 0x5c0dabc8)
    0x5c0dab68 : 0xc60c93 (0x46503000 0x0 0x5c0dabcc 0x5c0dabc8)
    0x5c0dabe8 : 0x56a738 (0x46503000 0x0 0x5c0dae3c 0x5c0dac74)
    0x5c0dac38 : 0x56afd7 (0xcef020 0x46503000 0x9de8188 0x1)
    0x5c0dac88 : 0x56b88b (0x46503000 0x10 0x5c0dacd0 0x0)
    0x5c0dada8 : 0x285be0 (0x46503000 0x10 0x9de8188 0x1)
    0x5c0dbe58 : 0x21d8be (0x9de8160 0xb2d35a0 0x1fd7e8 0x5d43)
    0x5c0dbe98 : 0x210a3e (0x9de8100 0x0 0x9599490 0x9a135e0)
    0x5c0dbef8 : 0x216ca1 (0x9de8100 0x0 0x0 0x0)
    0x5c0dbf78 : 0x295168 (0x93d2e28 0x0 0x0 0x0)
    0x5c0dbfc8 : 0x2a149d (0x93d2e24 0x1 0x10 0xa3dcf40)
          Kernel Extensions in backtrace (with dependencies):
             com.apple.GeForce(6.2.6)@0xc55000->0xd0afff
                dependency: com.apple.NVDAResman(6.2.6)@0x967000
                dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
                dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
             com.apple.nvidia.nv50hal(6.2.6)@0x1592000->0x19a6fff
                dependency: com.apple.NVDAResman(6.2.6)@0x967000
             com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
                dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
                dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 13050585546660
    unloaded kexts:
    com.apple.driver.AppleUSBUHCI    4.1.5 (addr 0x141c000, size 0x65536) - last unloaded 88225151866
    loaded kexts:
    com.apple.driver.AppleHWSensor    1.9.3d0 - last loaded 23992097310
    com.apple.filesystems.autofs    2.1.0
    com.apple.driver.AppleMikeyHIDDriver    1.2.0
    com.apple.driver.AGPM    100.12.19
    com.apple.driver.AppleHDA    1.9.9f12
    com.apple.driver.AppleMikeyDriver    1.9.9f12
    com.apple.driver.AppleUpstreamUserClient    3.5.4
    com.apple.driver.AppleMCCSControl    1.0.17
    com.apple.driver.AudioAUUC    1.54
    com.apple.driver.SMCMotionSensor    3.0.0d4
    com.apple.driver.AppleIntelHDGraphics    6.2.6
    com.apple.driver.AppleIntelHDGraphicsFB    6.2.6
    com.apple.kext.AppleSMCLMU    1.5.0d3
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.iokit.CHUDUtils    364
    com.apple.iokit.CHUDProf    366
    com.apple.driver.AudioIPCDriver    1.1.6
    com.apple.driver.ACPI_SMC_PlatformPlugin    4.5.0d5
    com.apple.driver.AppleLPC    1.4.12
    com.apple.GeForce    6.2.6
    com.apple.driver.AppleGraphicsControl    2.8.68
    com.apple.driver.AppleUSBTCButtons    200.3.2
    com.apple.driver.AppleUSBTCKeyboard    200.3.2
    com.apple.driver.AppleUSBCardReader    2.5.8
    com.apple.driver.AppleIRController    303.8
    com.apple.BootCache    31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.iokit.SCSITaskUserClient    2.6.5
    com.apple.iokit.IOAHCIBlockStorage    1.6.3
    com.apple.driver.AppleUSBHub    4.1.7
    com.apple.driver.AppleFWOHCI    4.7.1
    com.apple.driver.AirPortBrcm43224    427.36.9
    com.apple.iokit.AppleBCM5701Ethernet    2.3.9b6
    com.apple.driver.AppleEFINVRAM    1.4.0
    com.apple.driver.AppleSmartBatteryManager    160.0.0
    com.apple.driver.AppleUSBEHCI    4.1.8
    com.apple.driver.AppleAHCIPort    2.1.5
    com.apple.driver.AppleACPIButtons    1.3.5
    com.apple.driver.AppleRTC    1.3.1
    com.apple.driver.AppleHPET    1.5
    com.apple.driver.AppleSMBIOS    1.6
    com.apple.driver.AppleACPIEC    1.3.5
    com.apple.driver.AppleAPIC    1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient    105.13.0
    com.apple.security.sandbox    1
    com.apple.security.quarantine    0
    com.apple.nke.applicationfirewall    2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement    105.13.0
    com.apple.driver.DspFuncLib    1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction    17
    com.apple.driver.AppleProfileTimestampAction    10
    com.apple.driver.AppleProfileThreadInfoAction    14
    com.apple.driver.AppleProfileRegisterStateAction    10
    com.apple.driver.AppleProfileKEventAction    10
    com.apple.driver.AppleProfileCallstackAction    20
    com.apple.driver.AppleSMBusController    1.0.8d0
    com.apple.iokit.IOFireWireIP    2.0.3
    com.apple.iokit.IOSurface    74.2
    com.apple.iokit.IOBluetoothSerialManager    2.4.0f1
    com.apple.iokit.IOSerialFamily    10.0.3
    com.apple.iokit.CHUDKernLib    365
    com.apple.iokit.IOAudioFamily    1.8.0fc1
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleHDAController    1.9.9f12
    com.apple.iokit.IOHDAFamily    1.9.9f12
    com.apple.iokit.AppleProfileFamily    41.4
    com.apple.driver.AppleSMC    3.1.0d3
    com.apple.driver.IOPlatformPluginFamily    4.5.0d5
    com.apple.driver.AppleSMBusPCI    1.0.8d0
    com.apple.nvidia.nv50hal    6.2.6
    com.apple.NVDAResman    6.2.6
    com.apple.iokit.IONDRVSupport    2.2
    com.apple.iokit.IOGraphicsFamily    2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController    2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController    2.4.0f1
    com.apple.iokit.IOBluetoothFamily    2.4.0f1
    com.apple.driver.AppleUSBMultitouch    206.6
    com.apple.iokit.IOSCSIBlockCommandsDevice    2.6.5
    com.apple.iokit.IOUSBMassStorageClass    2.6.5
    com.apple.iokit.IOUSBHIDDriver    4.1.5
    com.apple.driver.AppleUSBMergeNub    4.1.8
    com.apple.driver.AppleUSBComposite    3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    2.6.5
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily    1.6
    com.apple.iokit.IOCDStorageFamily    1.6
    com.apple.driver.XsanFilter    402.1
    com.apple.iokit.IOAHCISerialATAPI    1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily    2.6.5
    com.apple.iokit.IOUSBUserClient    4.1.5
    com.apple.iokit.IOFireWireFamily    4.2.6
    com.apple.iokit.IO80211Family    314.1.1
    com.apple.iokit.IONetworkingFamily    1.10
    com.apple.iokit.IOUSBFamily    4.1.8
    com.apple.iokit.IOAHCIFamily    2.0.4
    com.apple.driver.AppleEFIRuntime    1.4.0
    com.apple.iokit.IOHIDFamily    1.6.5
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    6
    com.apple.driver.DiskImages    289
    com.apple.iokit.IOStorageFamily    1.6.2
    com.apple.driver.AppleACPIPlatform    1.3.5
    com.apple.iokit.IOPCIFamily    2.6
    com.apple.iokit.IOACPIFamily    1.3.0

  • HTML random question score incorrect.  SWF works fine

    Version 8.0.1.242
    Question pool 25 questions. Random Question slides inserted. All questions set to score 1.  24 are multichoice, all standard.
    Published as HTML
    Score reported is 1 out of x. 
    I have tested with 3, 5 and 25 random questions from the pool.  But the score is always 1 out of x
    Published as SWF
    Works correctly
    I really need the HTML version.
    Closed, reloaded.  Saved as - retested. Turned it off and turned it back on. Sacrificed a mouse...
    Andy

    Correct questions
    ....Should be same as total points scored anyway as there is 1 point for
    each question.

  • Random question slide not shown when FP 8 or FP 9 output

    Hi everyone
    I've just begun to use Captivate a month ago, so it is not
    that much experience I can contribute with by now.
    One thing I have recognized is that I get some problems with
    random questions slides made from different question pools when
    using Flash Player 8 or 9 in the output otions.
    When using Flash Player 7 everything works as supposed: one
    random question is shown for every random question slide using one
    distinct question pool for each random question slide.
    When using one of the two others some of my random question
    slides are not shown. There are slides that are played - meaning
    that the player shows an empty slide for the time of 3 seconds -
    but the content is not shown. This happens only for some of the
    random question slides, and those are the same question slides each
    time, I publish - but when working or dragging around with the
    random question slides and publish again, the problem would come
    with some other random question slides, not positioned the same
    place as before, but showing the same problem in each published
    version.
    As written before each question pool is only used once. The
    different question slides used in the question pools are all
    duplicates, naturally with adjusted content.
    Does anyone has experienced something like that before? Could
    there be any other trouble with the content when using Flash Player
    7 in the output options, like quiz not playing in newly updated
    Flash Players ore something like that? Anything?
    I appreciate your suggestions or comments! Thanks in advance
    and kind regards,
    Lars

    Some more info - and a working solution...
    I have worked on this topic a bit more - and found out, that
    I have a problem with output option set to Flash Player 7, too.
    When I delete every other navigation option than the "next
    question" (what is it called in english?) button, I get this
    problem:
    The quiz now "freezes" randomly, not every time, but again
    and again. The quiz has both random slides from question pools and
    simple question slides.
    I have found out, that putting the simple question slides
    into question pools and then showing a random slide from those
    question pools fixes the problem.
    Has anyone experienced problems like that? Other solutions?
    Kind regards
    Lars
    Maybe someone has a similar problem.

  • Convert to Question Pool random questions?

    We are updating a course we developed last year (prior to
    Captivate 3). This year we want to apply Captivate 3's "Question
    Pool random questions" to this course. Is there a way to create the
    question pool(s) in this existing quiz, and then add last year's
    questions to them without having to re-enter each question into the
    Question Pool Manager?
    Thank you for any tips!

    Hi Jan
    Sure thing. Just convert the version 1 or 2 project to a
    version 3 project. Then define a Question Pool. Once you have done
    that, switch to Storyboard view. Select the question slides you
    wish to add to the pool and right-click. You should be presented
    with an option to add the selected slides to the pool.
    Once you have moved the question slides to a pool, you would
    then insert Random slides that point to the pool.
    Cheers... Rick

  • How to make Random questions work without closing and restarting?

    I have a quiz using random question slides and random pools.
    The random slides display random questions when I run the CP4 file, let it close then relaunch it. I'm using an LMS.
    I would like to be able to repeat the quiz again without closing and relaunching, but my method does not work.
    I tried using a button (retake) on the last slide to 'jump to' slide 1 when clicked. The quiz does repeat, but show the exact same questions.
    I thought there might be a variable that would reset the quiz, but could not find one.
    Does anyone have method to do this?
    Thanks,
    Dave

    I don't know of a way. My experience is the same as yours. The quiz questions are selected and shuffled when the lesson is launched. When 'retake' is clicked, the quiz repearts the same questions. The only way to get a new set of questions is to close and relaunch it.
    I suppose there's be some function to invoke or array to manipulate via AS, but I've no idea what that may be...
    So no help here, just backing what you're seeing.
    Erik

  • Random Questions are Not Random

    The Question Pool has twenty-five (25) questions, and ten (10) Random Question slides in the project.  The frist time a learner takes the course the questions are randomly chosen, as they should be.  Assuming the learner fails and retakes the quiz, the learner is seeing the same set of questions; not a new 'random set.  Is there some setting that I am missing to give them a new random set of questions?  Thanks for any help!

    Sorry, but that is the way random question slides are designed. The only way to have another set of random slides is to restart the module.
    Lilybiri

  • Random questions on a DVD quiz?

    Hi,
    For one of my college projects I have to produce an interactive DVD quiz. The main issue though is, can I make a DVD quiz that will have random questions (video / screenshot) everytime?
    Is this possible with DVD Studio Pro?
    If so, how? Is it a simple thing, or will I need a long tutorial?
    Thanks for any help guys

    LOL - I did think of doing so, but saw that Drew had linked to a plethora of similar threads... some quite recent.
    I am wondering how much of this needs to be your own work for assessment and how much you can just crib from others? Not that I have any particular moral standpoint, it's just I used to be a teacher!
    So, to undermine the entire system, just head to that link Drew gave, scroll down and look for the one near the bottom dealing with 'non-repeat quiz'. There is a link to a download there which has all you need in it, I think. It certainly has the basic scripting and structures you'll need to use - whether you want to extend this or not will depend on what you need to achieve, but do look at it, see what it is doing and then adapt it for your use. I provide it with no limitations to its use, but can't guarantee an 'A' from it!

  • Random Questions not selecting Pool

    Intermittently, a pool question is bypassed in Cap6.
    I have 3 random questions slides, each linked to one of three pools.  I named each question Q1P1, Q2P1, etc. for tracking purposes.  Not all pools are having questions used.
    Has anyone else been able to ensure that each pool has a question used (which is what the random question slide linked to a pool did)?
    Thanks in advance for any help you can give on this issue.
    Lew.

    Thanks Rod. I tried both of your recommendations, and it seemed to work on my system. But, on another system, it was specifically NOT random for the pools.  It seemed to randomize the questions, just not the pools.
    Here are the test results from the other system:
    Try 1
    Q1 Pool 1
    Q2 Pool 2
    Q3 Pool 1
    Try 2
    Q1 Pool 2
    Q2 Pool 1
    Q3 Pool 1
    Try 3
    Q1 Pool 3
    Q2 Pool 3
    Q3 Pool 2
    Try 4
    Q1 Pool 1
    Q2 Pool 2
    Q3 Pool 2
    Any ideas?
    Lew

  • Random Questions Malfunction

    I have added 10 random questions to captivate 7 and I want to ask three to show for student. I have this set-up for text to speech. When I complete the module the questions appears fine, but I have experienced it reading a questions that it not on the slide. Any suggestions???

    OK, I think I entered everything correctly on GoDaddy, but it's still not quite working. The only thing that's really changed is there's now a GoDaddy logo and message saying the site does not exist. I have a feeling the problem's on MobileMe's end, as I'm pretty sure I followed all the instructions for GoDaddy correctly. Although I skipped over the "Configure MobileMe" step since I'm pretty sure I've already done that correctly before (in MobileMe under Personal Domain my domain is there, saying everything is fine). Just in case I tried to reconfigure MobileMe by going into iWeb, then File>>Set Up Personal Domain on MobileMe, but whenever I click it it says the page does not exist. I'm afraid to remove the domain entirely from MobileMe and start from scratch because the "Set Up Personal Domain on MobileMe" option isn't currently working, at least not for me...

  • Add random questions automatically

    Hi is there a way where the user can set the number of questions they would like to answer?
    thanks in advance

    Hi Michael
    Hmmm, I'm not so convinced this isn't possible. Why couldn't a Text Entry Box be used to gather the desired number of questions? For example, provide a range of say one to 20. Then store this in a variable. Then you could program a series of 20 random questions. But as each question is encountered, you could check and set variables. Then once the magickal desired number was met, finish the project.
    While it would be a bit of an effort, I could see that working.
    Just thinking out loud a bit... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for

  • Cannot upload music says I O error what does this mean?

    When uploading tracks says high res best wav or aiff when track is chosen to upload says I O error what does this mean?Tried all types of files same thing!! == URL of affected sites == http://www.jinglepunks.com

  • Goods receipt in intercompany purchase order

    Hi, In case of an intercompany purchase order ( plant to plant with different co. codes) when Goods Issue is done in supplying plant and Goods Receipt is done in receiving plant, then still reversal of Goods Issue is possible and stock gets updated i

  • How to increase the length of Remarks in Journal Vouchers

    Hi SAP Guru, I  am new in SAP Business One.  Normally our Narration which we feed in Details of Journal Voucher is longer than the space provided.  Is there any way to increase the length of Details field in Journal Voucher or Some other way we can c

  • Can anyone offer help with Tripadvisor loading incorrectly?

    I frequently use Tripadvisor and I'm tired of trying to figure out what the problem is. When I load the webpage and go to read reviews of hotels, it loads these giant PNG files which are supposed to be a small rating bar for each review (it's virtual

  • EDI - PO

    Hi Everyone, I'm trying to learn EDI and its concepts. I am hearing many terms like Gentran, and some codes like 850 for Outbound PO. Though I know Outbound PO, I do not know what does the number 850 signify. I get many other numbers like this (810,