Random shutoff no error message

Hello,
I have a 12 month old Toshiba Satellite L50-A013 (Australian) with Windows 8.1 installed. It has started to randomly shut off without warning or any error messages upon restart.
It will function for about 30mins before shutting off.  It occurs on battery and when plugged in; when I am using it, when it is idle and during sleep.
I have updated all my drivers and that had no effect. I have cleaned out any dust and have been monitoring for overheating, which has not occurred. I have reset all the power options and created my own to no avail. I have replaced the RAM as I thought that may be faulty, but that didn’t solve the problem. I have performed a simple CHKDSK and used the Intel diagnostic tool to check for errors and it came up fine. I haven’t performed a system restore as I am afraid the computer will shutoff and interrupt it.
The Event Viewer reports watchdog timer error (Event ID 13) followed by kernel-power 142 & 41 critical.
Ive been Googling for days. Any help would be appreciated.

I suppose Real Audio was used, though for sometime I used Iomega to store them on zip disks. It has been a long time. For the CD's that I have on hand, I have been doing what you suggested. This is not easy, as the old files were just all together in one file, and while I thought I had changed settings so that iTunes would do the same (after learning that iTunes puts things in lots of different folders - especially confusing for me with soundtracks with different artists)the last one I did was put in folders entitled unknown/unknown with only track numbers. And if I change anything using explorer, I have to find each file for iTunes again. I'm still struggling, not understanding how these mp3 files are different in some way. Some are from the same CD's. At any rate, now that I am (found your term) ripping these CD's again, is there a way to avoid all the folders and layers of folders? Thank you for your patience. Obviously when my daughters were here to help, me being green was not a problem@

Similar Messages

  • Newbie, Help! iTunes won't play or import random files - no error message

    Have a large library of MP3 files created with Real Audio. All played well in Real Audio or Windows Player. I did a complete unintall of Real Audio, installed ITunes, and while it accepts some of the songs(files), it doesn't accept others. It seems utterly random. There are no differences between the files. All are legit. I do not get an error message, but NOTHING happens no matter what method I employ to play or import the song/file. Have compared file attributes via properties and there is no difference. Itunes is the default player, and I have not reinstalled Real Audio. I just listen to the songs on computer while working, but thought I would try Itunes and get an IPod. Not off to a very good start.

    I suppose Real Audio was used, though for sometime I used Iomega to store them on zip disks. It has been a long time. For the CD's that I have on hand, I have been doing what you suggested. This is not easy, as the old files were just all together in one file, and while I thought I had changed settings so that iTunes would do the same (after learning that iTunes puts things in lots of different folders - especially confusing for me with soundtracks with different artists)the last one I did was put in folders entitled unknown/unknown with only track numbers. And if I change anything using explorer, I have to find each file for iTunes again. I'm still struggling, not understanding how these mp3 files are different in some way. Some are from the same CD's. At any rate, now that I am (found your term) ripping these CD's again, is there a way to avoid all the folders and layers of folders? Thank you for your patience. Obviously when my daughters were here to help, me being green was not a problem@

  • My New HP Envy H8 restarts randomly without an error message

    My Envy desktop has now chosen for the last few months to restart itself whenever it wants...
    This can happen several times a day, or once in a few days...
    Its very frustrating...please help...
    Also tells me all the time that HP Ceement has stopped working everytime i use HP support assistant...

    Hi BarryPK,
    Please provide your product number (no serial number) and the installed operating system version, (i.e, Win 7 32 bit or 64 bit).
    Your PC may be blue screening. We need to create, view, and interpret the mini dump file for analysis.
    Please see this Microsoft Support article on configuring and reading a small memory dump file.
    You can post the file in the forum for review and possible solution.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    16 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • TS4291 Apple Support article TS4291 "Error messages appear when you access MobileMe"

    I occationally, seemingly randomly, get the error message, "There was a problem connecting to the server "idisk.mac.com". Contact your system administrator for more information."  Plus it allways takes somewhere in the neighborhood of 20 clicks to close the error message dialog box.
    The solution given is, "Your iDisk is unavailable.  Make sure you are logged in to your MobileMe account, and then try again to access your iDisk.
    But idisk and mobleme no longer exist having been replaced by iCloud.  I am logged into ioCloud.
    The article was updated Aug. 30, 2012.  MobleMe was shute doun June 30, 2012
    Any thoughts appreciated.  --sb

    Something on your Mac is still trying to access a Mobile Me service, find it and then you can fix it.
    Examples include: Apple Backup 3, iPhoto, iCal, Address Book, but there may be others.

  • Anyone getting this pop up error message after installing Lion?

    After installing Lion I now get random pop up error messages that say...There was a problem connecting to the server. URL's with the type "file" are not supported. I have to keep closing them. Any ideas what to do?

    Actually, In my case, turning off Time Machine didn't help. I had the same problem. We definitely traced it to Time Machine. The "Fix" was this: plugged in and designated different external HD as Backup volume. Then unplugged it and plugged in the original disc (after testing in in a different machine) and now the computer recognized it and error message stopped popping up. The Apple tech was as puzzled as I as to why this worked, but perhaps, forcing the machine to re-recognize it (or maybe even gettting it recognized by a different machine first) somehow worked some magic.

  • Error message url not supported by file

    When I'm on the internet, I randomly get an error message that reads 'url not supported by file:' What does this mean?
    Okay, just read other comments on this and I shut off my Time Machine for now - hopefully this works.  Thanks

    Depends on which browser and it's version you are using?  Solution may be found if you search in the "More Like This" section over in the right column. 
    Are you wireless or ethernet connected? 

  • Error message ~10810

    I keep randomly getting this error message when I try to open applications. No consistency on which ones and sometimes someone will open but one just will not get going. If I restart it's fine for a while but often comes back.
    Anyone else seen this?

    Start with the following:
    Finder Error -10810 in Snow Leopard causing problems;
    Google search results for this error in OS X.
    The following have been suggested as possible solutions:
    1. If you're using 10.3, you need to get rid of the following:
    /Library/Caches/com.apple.LaunchServices.6B.csstore
    ~/Library/Preferences/com.apple.LaunchServices.plist
    (where '~' means your Home directory, i.e. '/Users/yourname')
    2. If you have Virex or other virus software installed, try uninstalling it. Be sure to use uninstallers that come with the software because simply deleting the application does not fully uninstall most virus software.
    After deleting the referenced files above you will want to do a restart. Then use Disk Utility in your Utilities folder to repair permissions.
    If you have installed any third-party software extensions for USB devices then there may be a problem with these. The drivers could be incompatible or contain bugs. Start by uninstalling the software and disconnecting the peripherals.
    One way of confirming the above is to boot into safe mode to see if the errors stop appearing.
    Message was edited by: Kappy

  • ICloud nonspecific error message

    I keep randomly getting an error message on top of my other windows stating that "there is a problem with iCloud" but there is no specific information about what that problem might be. When I go to iCloud preferences everything seems fine and if I log into iCloud.com there is no problem. Has anyone had a similar problem, how do you fix it?

    See my reply in your other identical post. 

  • Random restarts, Software malfunction? Error message.

    Hi everyone!
    I would like to ask for your help. My MacBook Pro started the have a malfunction about 1 month ago.
    It has been randomly restarting by itself. As you can imagine this can be very annoying when you are working on your projects.... (saving every second)
    So basically I brought my mbp to an apple store where they ran all the hardware tests. They said it was the Hard Drive so I bought a brand new hdd and replaced it by myself, reinstalled the system (mountain lion) without a problem. BUT A day after, when I fully copied al my documents from the hard drive I had before (wasn't damaged physically) the restarting started again.
    I would highly appreciate if anyone could advise me what to do... since I changed the hard drive and apple said there are no hardware problems.
    After all the restarts (there were a lot) I always got an error message which is the following:
    Interval Since Last Panic Report:  37551 sec
    Panics Since Last Report:          11
    Anonymous UUID:                    65BC4D9A-9BB5-534A-0CDA-B688524AAC0C
    Tue Sep 23 16:03:51 2014
    panic(cpu 0 caller 0xffffff7f947f6f1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff808f2f1000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 0), Frame : Return Address
    0xffffff808e3bb710 : 0xffffff801261d626
    0xffffff808e3bb780 : 0xffffff7f947f6f1a
    0xffffff808e3bb850 : 0xffffff7f92d5ff1e
    0xffffff808e3bb910 : 0xffffff7f92e3412d
    0xffffff808e3bb950 : 0xffffff7f92e3418e
    0xffffff808e3bb9c0 : 0xffffff7f930faed0
    0xffffff808e3bbaf0 : 0xffffff7f92e5ca75
    0xffffff808e3bbb10 : 0xffffff7f92d66d50
    0xffffff808e3bbbc0 : 0xffffff7f92d647d0
    0xffffff808e3bbdc0 : 0xffffff7f92d65845
    0xffffff808e3bbea0 : 0xffffff7f92d010a4
    0xffffff808e3bbef0 : 0xffffff7f947ba0df
    0xffffff808e3bbf40 : 0xffffff7f947b91e7
    0xffffff808e3bbf60 : 0xffffff801263e25e
    0xffffff808e3bbfb0 : 0xffffff80126b3137
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f947e9000->0xffffff7f947fbfff
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7f947e4000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
                dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f947d0000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f92be8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
             com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f92c fe000->0xffffff7f92fa3fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
             com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f92faf000->0xffffff7f93283fff
                dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f92c fe000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
             com.apple.driver.AGPM(100.12.87)[621C8E31-07A5-38AC-95C9-F600FA62270B]@0xffffff 7f947b8000->0xffffff7f947c7fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.3.0d51)[7B50B447-FF44-3529-9505-3F49C F1CCB4F]@0xffffff7f9371e000
                dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x0000000012400000
    Kernel text base: 0xffffff8012600000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 4414805088952
    last loaded kext at 1784078608355: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f94906000, size 16384)
    last unloaded kext at 1857495295190: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f94906000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AGPM 100.12.87
    com.apple.driver.AppleMikeyHIDDriver 122
    com.apple.driver.AppleHDA 2.3.7fc4
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.driver.AppleSMCLMU 2.0.3d0
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.ApplePolicyControl 3.4.5
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.GeForce 8.1.2
    com.apple.driver.AppleIntelHDGraphics 8.1.2
    com.apple.driver.AppleIntelHDGraphicsFB 8.1.2
    com.apple.driver.AppleUpstreamUserClient 3.5.10
    com.apple.driver.AppleLPC 1.6.0
    com.apple.driver.AppleMikeyDriver 2.3.7fc4
    com.apple.driver.AppleMuxControl 3.4.5
    com.apple.driver.AppleMCCSControl 1.1.11
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.SMCMotionSensor 3.0.3d1
    com.apple.driver.AppleUSBTCButtons 237.1
    com.apple.driver.AppleUSBTCKeyboard 237.1
    com.apple.driver.AppleUSBCardReader 3.1.7
    com.apple.driver.AppleIRController 320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 34
    com.apple.iokit.SCSITaskUserClient 3.5.5
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.3.1
    com.apple.driver.AppleUSBHub 5.5.5
    com.apple.driver.AirPort.Brcm4331 615.20.17
    com.apple.driver.AppleFWOHCI 4.9.6
    com.apple.driver.AppleAHCIPort 2.5.2
    com.apple.iokit.AppleBCM5701Ethernet 3.6.1b4
    com.apple.driver.AppleUSBEHCI 5.5.0
    com.apple.driver.AppleEFINVRAM 1.7
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 1.7
    com.apple.driver.AppleRTC 1.5
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 1.9
    com.apple.driver.AppleACPIEC 1.7
    com.apple.driver.AppleAPIC 1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
    com.apple.nke.applicationfirewall 4.0.39
    com.apple.security.quarantine 2.1
    com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
    com.apple.iokit.IOSerialFamily 10.0.6
    com.apple.kext.triggers 1.0
    com.apple.driver.DspFuncLib 2.3.7fc4
    com.apple.iokit.IOAudioFamily 1.8.9fc11
    com.apple.kext.OSvKernDSPLib 1.6
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
    com.apple.iokit.IOFireWireIP 2.2.5
    com.apple.iokit.IOSurface 86.0.4
    com.apple.iokit.IOBluetoothFamily 4.1.4f2
    com.apple.nvidia.nv50hal 8.1.2
    com.apple.NVDAResman 8.1.2
    com.apple.driver.AppleSMBusPCI 1.0.11d0
    com.apple.driver.AppleGraphicsControl 3.4.5
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.3.7
    com.apple.driver.AppleSMBusController 1.0.11d0
    com.apple.driver.AppleHDAController 2.3.7fc4
    com.apple.iokit.IOGraphicsFamily 2.3.7
    com.apple.iokit.IOHDAFamily 2.3.7fc4
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.3.0d51
    com.apple.driver.AppleSMC 3.1.4d2
    com.apple.driver.AppleUSBMultitouch 237.3
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
    com.apple.iokit.IOUSBHIDDriver 5.2.5
    com.apple.iokit.IOUSBMassStorageClass 3.5.1
    com.apple.driver.AppleUSBMergeNub 5.5.5
    com.apple.driver.AppleUSBComposite 5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
    com.apple.iokit.IO80211Family 530.4
    com.apple.iokit.IOUSBUserClient 5.5.5
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.3.1
    com.apple.iokit.IOEthernetAVBController 1.0.2b1
    com.apple.iokit.IONetworkingFamily 3.0
    com.apple.iokit.IOUSBFamily 5.6.0
    com.apple.driver.AppleEFIRuntime 1.7
    com.apple.iokit.IOHIDFamily 1.8.1
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 220.3
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.DiskImages 345
    com.apple.iokit.IOStorageFamily 1.8
    com.apple.driver.AppleKeyStore 28.21
    com.apple.driver.AppleACPIPlatform 1.7
    com.apple.iokit.IOPCIFamily 2.7.3
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: HGST HTS721010A9E630, 1 TB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
    Message was edited by: D0n0lier

    D0n0lier wrote:
    Hi, thank you. I brought my computer to an apple store genius bar already and they said there is no hardware problem.
    They said, they have no personnel to read the kernel panic... I'm in France.
    Then you went to a store that does not seem to have qualified personnel.  This is the extract from the kernel panic report that clearly indicates the GPU issue:
    Whether your HDD has a problem is a separate issue, but there is no indication here that there is a HDD problem.
    Ciao.

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • Randomly occurring Disk Insertion error message

    Running a mac mini with 10.5.4 I seem to get a randomly occurring error message "Disk Insertion - The disk you inserted was not readable by this computer" with choices to "Initialize" or "Eject". The weirdness is that the message seems to pop up at random intervals when I haven't attempted to insert a disk.
    Mac mini 10.5.4 with 500GB external hard drive

    I got this exact same message with my old Mini. It stopped as soon as I disconnected my iPod Shuffle. Haven't got round to figuring out how to fix it yet.

  • Random Error Message..

    Everytime i sync my ipod to my mac i get this error message... i hit ok and everything syncs fine, but its driving me mad..
    ive reset the ipod to factory default twice with no help
    http://www.chilternburt.com/downloads/ipoderror.jpg
    Message was edited by: Michael McGlone
    Message was edited by: Michael McGlone

    "2JZ" <[email protected]> wrote in message
    news:g8kobl$aps$[email protected]..
    > TypeError: Error #1034: Type coercion failed: cannot
    convert
    > mx:managers:DragManagerImpl@17294e49 to
    mx.managers.IDragManager.
    > at mx.managers:ragManager$/get
    >
    impl()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\
    > managers\DragManager.as:152]
    > at mx.managers:ragManager$/get
    >
    isDragging()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\
    > managers\DragManager.as:187]
    > at
    >
    mx.charts.chartClasses::ChartBase/processRollEvents()[C:\Work\flex\dmv_automatio
    > n\projects\datavisualisa
    > tion\src\mx\charts\chartClasses\ChartBase.as:2292]
    > at
    >
    mx.charts.chartClasses::ChartBase/mouseMoveHandler()[C:\Work\flex\dmv_automation
    > \projects\datavisualisa
    tion\src\mx\charts\chartClasses\ChartBase.as:4284]
    >
    > I got the above message randomly when I mouse over my
    application. My
    > application has 2 modules. They are custom chart module
    and Advance Data
    > Grid
    > module. I cannot tell which one cause the error.
    >
    > Please help!!!
    >
    http://tech.groups.yahoo.com/group/flexcoders/message/121129

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • TS2634 While using my Ipod with a Sony sound dock, it randomly gives me an error message of "incompatibility."  Any ideas?

    While using my Ipod Touch with a Sony Sound dock, it randomly gives me an error message - "incompatible."  It honestly worked perfectly for an hour, then suddenly stopped being compatible?  Any ideas out there? I have:
    started, restarted.
    Plugged, unplugged.
    Tried dock with a different ipod- worked fine.
    Help!

    It's a Touch, not a phone, so not sure how to answer if it's a 4G... sorry:)
    Inspection doesn't yield anything obvious;  I've tried a soft toothbrush and air duster spray, to no avail...
    The Ipod touch does work on another device;  I'm still trying to figure out why it worked for several hours this morning, then get the message that "this device is not supported by this Ipod."   Wierd.

  • HP Envy 15 shut down randomly during usage, no error messages, no overheating

    hi,
    I bought my HP Envy 15 only in July and 3 days ago it started shutting down randomly! I would be using my computer or the computer would be turned on, then it suddenly would shut down by itself. When I start it back up again I don't get any error messages so I can't figure out what's going on. This has happened 5 times within the past 3 days. The last time it happened, I was browsing a website and then the computer just shut down with a clicking sound! Overheating is not a problem because the computer is barely lukewarm and I'm not running any softwares. PLEASE HELP!!!

    Hi @newhpuser2014 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15 and just randomly starting to shut down.
    I recommend to do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I would suggest a date of just over a week before the issue started.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Windows 8 and i-pod

    I have windows 8 and cannot use my i-pod. it does not recognize apple and vise versa. i have to wait for a fix. can listen to music that is on the i-pod, but cannot download any thing from my library.

  • Can't locate card with serial number.

    I bought this app prior to the recent upgrade. My old computer however didn't have enough juice to run it. Now that I have it, I went to install it and I can't find the card with the number. I'm sure Apple has a purchase record somewhere. I bought it

  • Ucs 6248 HA cluster can not login

    6248-A manager ip1.1.1.2 6248-B manager ip1.1.1.3 cluster VIP 1.1.1.1 cisco6248-A# show cluster extended-state Cluster Id: 0xd59a70527a4111e2-0x8b74547feebbcd64 Start time: Sat Feb 23 12:44:03 2013 Last election time: Sat Feb 23 12:55:11 2013 A: UP,

  • How to handle SYS_REFCURSOR?

    I created table in oracle 11g like below, CREATE TABEL family( EMP_ID VARCHAR(255), EMP_PASSWD VARCHAR(255), EMP_NAME VARCHAR(255), PRIMARY KEY(EMP_ID) ) And I inserted a few data. commit command was successful. I made a stored procedure to call data

  • English Version

    I live in Japan and want to buy a English copy of dreamweaver When I download the trial is always comes out in Japanese Am worried that if I purchase it online the same thing will happen Can anyone point me in direction of how to buy English version