Random test questions quiz results not working

I have a project with random test questions. It's published in HTML5...Each time I play the project in preview, the test results are accurate and correct at the end...However after I have published the project to my site, all the random test questions are NOT accurately scored in at the end of the quiz...It's tells me basically I got all the questions wrong, when in fact the on each questions my display is clearly stating it's correct.
If I move the question out of the random test questions and back into the main project...it is scored correctly, but once it's back in the "pools" area, it is scored incorrectly in the final tally as a random test question...Don't have a clue why this is...it's really been time consuming trying to fix it...and my fortune so far fixing anything to do with Captivate is really low! Buggy! I'm using Captivate 8, so have no idea...
Anyone have any idea what is going on?

So obvious I don't know why I didn't think of that. LOL
Many thanks that works.
It would appear that the only way to adjust the pause is to add time to the
slide as I am unable to slide the pause back. But changing the slide of 3
secs to 3.1 does work.
Is there an easy way to do this for ALL slides or do I just have to do it
one by one.
Again many thanks
Andy
Jeddah by the sea, Saudi Arabia.

Similar Messages

Continue button in Quiz Results not working.

On the Quiz Results page, if someone clicks the Continue button, it does nothing no matter pass or fail. I have these settings:
Slides 55 and 44 do exist. Any ideas?

Hi RodWard,
Okay, your question was helpful in that it helped me find some things out. First, continue works if passed, it just takes 5-7 seconds to get there. I fixed that.
Changing the Required to "Answer All" instead of "Pass Required" fixed the Continue on the fail. Thanks so much!

Running OpenScript tests in OTM does not work

Hi,
I added an OpenScript functional script (for Siebel) in OTM, and when I click on "Run this test", and I see no action. In the Run History, OTM shows in the "Results" column that the test is "Running", although more than hour has passed since starting the test run.
Are there any settings/configurations I should do to get this to work?
Another questions, could I use OTM to run a group of OpenScript functional scripts as batch testing? If not, how could I run batch OpenScript testing?
Thanks,
Shadi

Hi again,
I have solved the issue of openscript tests running with OTM. I opened the System manager from OTM (Tools-> Systems) and enterd my Windows account password and clicked "Test", then went back and ran my openscript test and it satarted to work. I wonder why this was not mentioned in any of the documentation files.
I also face the common issue that OTM ignores the think() statement, and don't know how efficient using the delay() statement is and if it actually works.
ISSUE1 Is there a way to force OTM to perform the think() statement? It would be great if we have it as an option.
Regarding batch testing, I created a Schedule Task in OTM, and selected some tests to run as a batch, and it worked. The issue I have here is when I want to clone the Task I ran previously by clicking on the "Clone", it does not include the list of tests I selected in the cloned Task.
ISSUE2 For example, if I have ceated a Task and added 10 tests to it, and later after it was run I want to clone it in order to run it again, the 10 tests are not inculded and I will have to select them manually.
ISSUE3 Is this the only way to run batch testing for openscript (using Task)?
I will try to find a work around for this issue, but hope you guys could help.
Thanks,
Shadi

Results slide showing all question pool results not just the ones completed.

I have several question pools which have the option to be taken independently or separately.
If the user does not take all seven of the modules then the quiz results slide at the end is incorrect as it will report all of the questions not just the ones attempted.
I have tried the Branch aware option in the quiz results option but that did not worth.
It this an easy fix or does it require me to add a variable count for each correct answer.
Many thanks
Rick

Branch aware should be just fine for that case, why do you tell it is not working? Branch Aware Quiz - Captivate blog
When you say 'score slide is not reporting correctly', I had no such problems.
You could create a custom score slide indeed, using variables, but what if you have to report as a SCORM? Only possibility in that case is Branch aware.

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

IProcurement - new VO for search results not working properly?

Greetings
There is a requirement for the project I´m working, where the search results on iProcurement must be filtered depending on some profiles setted for the user.
So, basically the search shouldn´t look into ICX_CAT_ITEM_PRICES, but on a custom view that works on that table, but filtering results.
Unfortunately, that´s not working. I extended the VO (which seems to be SearchResultsVO and ItemDetailParametersVO), so the queries are now pointing to the view. But once the search is performed, the results are not filtered. It´s the very same results as before.
Am I doing something wrong? There is some cache that works even after the Apache server is restarted? Please I could really use some help on the subject! Thanks!
Best Regards,
Thiago

Thiago,
Why don't you use a local Jdev setup for substitution process so that testing and debugging is easier.
Follow these steps for testing locally:
1. Add your VO to AM.
2. After extending VO, do the following,
Right-click on your project in the Navigator pane, and select Edit Business Components Project (or right-click on the project's .jpx and select Edit <project>).
a. Select the Substitutions section.
b. From the Available list, select the base object that you want to replace and press ok.
3. Normally, the BC4J runtime does not read a project's .jpx file. To override this default behavior in JDeveloper so you substitutions can be used, you must do the following to ensure that the classpath contains the .jpx file.
a. Right-click on your project and select Project Settings.
b. Then in Configurations | Development | Runner, add -Djbo.project=Name to the Java Options. Note that the Name value is the .jpx file name without the .jpx extension (for example, ExtendLabSolutions). Be sure to include a space between any existing options and the new option.
--Shiv

Quiz result not showing up in Edge

Hi there Edgers
Really hoping someone can help me out with this problem. I've used Redesigns code(Seen Below) to design a quiz in Animate.
I have two problems, when the first question is answered, it skips to the 3rd question instead of the 2nd. I am not sure why this is as I have have checked for overlapping buttons, there are none and it does not occur on any other questions, only the first. Second problem is the quiz reult is not showing up at the end, I have the "grade" and "result" divs in my timeline but when they are reached they do not change to display the quiz results.
Help would be much appeciated
i = 0;
sym.$("btn4","btn24","btn34","btn44","btn54","btn64","btn74").click(function(){
          i++;
          sym.play("s" + i);
          if (i==1){
                    q1 = 10;
                    //sym.$("question1").html(q1);
          if (i==2){
                    q2 = 10;
                    //sym.$("question2").html(q2);
          if (i==3){
                    q3 = 10;
                    //sym.$("question3").html(q3);
          if (i==4){
                    q4 = 15;
                    //sym.$("question4").html(q4);
          if (i==5){
                    q5 = 15;
                    //sym.$("question5").html(q5);
          if (i==6){
                    q6 = 20;
                    //sym.$("question6").html(q6);
          if (i==7){
                    q7 = 20;
                    //sym.$("question7").html(q7);
          var FinalScoreHolder = q1 + q2 + q3 + q4 + q5 +q6 +q7;
          if (i=7){
                    //var FinalScoreHolder = q1 + q2 + q3;
                    sym.$("grade").html("You scored "+FinalScoreHolder+"%");
                    if (FinalScoreHolder >= 90) {
                    // play the timeline from the given position (ms or label)
                    sym.play("pass");
                    } else {
                    // play the timeline from the given position (ms or label)
                    sym.play("fail");
As a side note, this quiz appears at the end of a 8 section mulitmedia learning environment. The code obove is the only code present in the "creationcomplete" window, the rest is done in the timeline.
George

In you if statement you need to change the if statement from i=7 to i==7; when you compare you need the double equal sign.
var FinalScoreHolder = q1 + q2 + q3 + q4 + q5 +q6 +q7;
          if (i==7){
                    //var FinalScoreHolder = q1 + q2 + q3;
                    sym.$("grade").html("You scored "+FinalScoreHolder+"%");
                    if (FinalScoreHolder >= 90) {
                    // play the timeline from the given position (ms or label)
                    sym.play("pass");
                    } else {
                    // play the timeline from the given position (ms or label)
                    sym.play("fail");

Conditional Branching with quiz slides not working

Attempting to use conditional branches with quiz slidescauses
the other quiz slides in my presentation to not work correctly. I
am attempting to create a 'test-out' pre-quiz for a segment of
slides in the presentation. I followed the instructions to add
conditional branching per page 46 of the Breeze Presenter User
Guide to obviously no avail. Is there a simple straightfoward
manner in which someone has successfully used conditional branches
with their quiz slides in their presentation?

Hi,
I had the same issue.Apparently as of now PDF templates do not support conditional formatting for XML Publisher.
See Tim Dexter's response to my query at the bottom of this thread...
Re: Using the '%' operator in microsoft word template builder for XMLP
I could get some conditional formatting to work on the pdf template but only for the form field font,size and styles using Javascript, but I don't think there is a way to display values for the form field based on an if condition...
Lavina

Subtraction of two key figures normalized to result not working as expected

Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
200805         PLANT-A MAT-1            200805         510,235.00
200805         PLANT-B MAT-1           200805          74,240.00
200805         PLANT-A MAT-1           200806         438,721.00
200805         PLANT-B MAT-1           200806          74,240.00
200805         PLANT-A MAT-1           200807         356,981.00
200805         PLANT-B MAT-1           200807          74,240.00
200806         PLANT-A MAT-1           200805               0.00
200806         PLANT-B MAT-1           200805               0.00
200806         PLANT-A MAT-1           200806         510,235.00
200806         PLANT-B MAT-1           200806          74,240.00
200806         PLANT-A MAT-1           200807         438,721.00
200806         PLANT-B MAT-1           200807          74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Comparison Units (June 2008) 510,235.00 438,721.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Comparison Units (June 2008) 74,240.00   74,240.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 1.77%       2.74%
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units % -1.77%      -2.74%
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units %       0.00        0.00
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
Mario

Hi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P.

Question mark key not working

hi my question mark key on macbook pro is not working any ideas please

Does it work when an external keyboard is plugged in?
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Copy inspection results not working

Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaX

Go through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

Quiz results not correct

A number of users who are doing some elearning material I have created are having problems with the quiz.
If they get any of the answers wrong they have to retake, however the answers are not clearing, and if they do get all the questions

Hi
I am using Captivate version 4
Quiz Settings:
Reporting is enabled
LMS = SCORM
Report status = pass / fail
Report to LMS = Score
Report date = quiz results only
Reporting level = Interactions and score
Settings
Show progress
Show score at end of quiz are set
Pass/Fail
100%
If fail
Infinite attempts
Show retake button

Hardware test with D key not working

My early 2008 Macbook suddenly doesn't have the use of the whole A through L row, plus the letter Q and the delete key. Disk verification and repairing permissions hasn't helped. I also zapped the PRAM and reset the PMC. I would like to run a hardware test before I reinstall the system, but is there a way to start up into the hardware test when my D key doesn't work? Leopard 10.5.5.
Message was edited by: Angie Telepenko

Angie Telepenko wrote:
I'm going to try archive and re-install first, because browsing these boards I've seen other people with the same problem had it solved by doing that.
If the keyboard does not work at boot-time, It's not the OS. Reinstalling would be a waste of time.
At boot, there is only your firmware. If you can connect an external KB to your computer you can verify if it's your keyboard or the hardware. If the USB keyboard works, try resetting PRAM with it.
If the new KB also has the same issue, then your logic board or a similar board is bad, IMO.

Test Flash Player animation not working in Firefox

Flash demos at the following link are not working for me on Firefox, but work fine in Chrome & Safari: Adobe - Flash Player
I have also gotten an error on Tumblr that Flash wasn't installed. I tested it in safe-mode, when 33.02 was the latest as this is an old problem, & also tested with the latest release version 34.0.5.
This screenshot shows what i see on the Adobe Flash test page - just this dark red color fill, no animation: http://oi61.tinypic.com/2r5ten6.jpg
(Same exact image/animation with Flash 16.0.0.235)
on Chrome/Safari i see this in an animation: http://oi62.tinypic.com/2qdsm13.jpg
i tried uninstalling Flash using these instructions, rebooted, reinstalled, and no change:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

yup, you're right. i just installed Firefox for the first time on an old laptop and the test animation plays fine. I did test it in safe mode though, which disables add-ons and the problem still happened, so it must be a lower level issue. this is probably causing other problems with Flash for me all over the web. i'll try the uninstall/reinstall first when i have a chance. hopefully that works. if not, then i guess i'll have to create a new profile.
thanks

Install question- blur tool not working and guided option doesn't show a menu

I bought and dowloaded PSE11. However, I don't think I disabled my virusware. It took an especially long time to download and I don't know if it downloaded correctly. My blur tool does not work and my "guided" options are not there. What is the easiest fix- unistall and remove the serial number then reistall using same serial number? My question with this is- how many times can I do this, and or is there an easier fix? I have PSE11 and LR4 and I am going back and forth between which one to use. I really need all the options to work from PSE11. I am not a great IT person so I need the answer in basic easy language to understand please:-)
Thanks

The blur tool doesn't do much under the best of circumstances, so it may be working and just not making enough of a difference to see. However, for the problem with guided edit, reinstalling is probably the easiest solution at this point. Activation is tied to your hardware so you don't need to deactivate PSE if you don't want to, but it won't hurt to deactivate it. There is a limit, but for reinstalls on the same machine it's unlikely you'd ever get there, and if by some chance you did, you just contact activation support to reset things.

Random test questions quiz results not working

Similar Messages

Maybe you are looking for