Rapid install gettin error when create control file

hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite  reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
  |      0% completed       ^M
  /      0% completed       ^M
  -      0% completed       ^M
  \      0% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
    RW-50010: Error: - script has returned an error:   1
RW-50004: Error code received when running external process.  Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0

hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons

Similar Messages

  • Error while creating control file

    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sql
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1  CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS  froce logging NOARCHIVELOG
    2      MAXLOGFILES 32
    3      MAXLOGMEMBERS 2
    4      MAXDATAFILES 32
    5      MAXINSTANCES 16
    6      MAXLOGHISTORY 1752
    7  LOGFILE
    8  GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA'  SIZE 50M,
    9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA'  SIZE 50M,
    10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG'  SIZE 25M,
    11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG'  SIZE 25M
    SQL>

    CHETAN YADAV wrote:
    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
    2 MAXLOGFILES 32
    3 MAXLOGMEMBERS 2
    4 MAXDATAFILES 32
    5 MAXINSTANCES 16
    6 MAXLOGHISTORY 1752
    7 LOGFILE
    8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
    9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
    10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
    11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
    SQL>

  • Error when creating ZIP file (return value 2 when IGS was called)

    Hello All
    I attempted to Schedule a Query to the Portal folders and executes fine.  However when it's scheduled to and email, I am getting this message
    'Error when creating ZIP file (return value 2 when IGS was called)'
    Any ideas?
    Thanks ...BK

    Hello Kai
    Thanks very much for the info.  how would I know what patch the IGS is?
    Thank you.
    Regards..BK

  • I am getting error while creating Control file for a fla file upoad in HANA

    Hi Experts,
    I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
    Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
    SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
    Here is the code I have used to create control file after I creating the table.
    import data
    into table P935718."COPATBL"
    from 'COPATBL.csv'
        record delimited by '\n'
        fields delimited by ','
        optionally enclosed by '"'
    error log 'P935718.COPATBL.err'
    p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
    Please help me in this regard.
    Thanks,
    Guna

    Hello,
    guessing from the error message it looks that you are trying to execute "import data" as SQL command.
    Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
    In a shortcut:
    1.- create comma separated CSV file with your data - <source cvs>.csv
    2.- upload CVS file to HANA server
    3.- create the control file <filename>.ctl:
    import data
    into table <schema>."<table name>"
    from '<source cvs>.csv'
    record delimited by '
    fields delimited by ','
    optionally enclosed by '"'
    error log '<file name>.err'
    4.- execute command:
    IMPORT FROM '/<path>/<filename>.ctl'
    Please check following threads:
    How to load CSV files into HANA
    Will HANA supports Bulkload
    Tomas

  • OWB 11g rel2 Client install. Error when creating my first Workspace

    We just installed Oracle 11g rel2 Std edition database on Oracle Linux. No problem connection with Toad. Everything works fine.
    I have just installed OWB 11.2.0.1 client on Windows 7 and Windows 7 in XP mode. Having the same problem on both installations mentioned below.
    No I am about to create my first Workspace in Repository Assistant where I get an error:
    - Step 1, Database information
    - Host xxx
    - Port 1521
    - Oracle Service Name: instance name (the one I use in Toad that works)
    -SQL Net Connection: Checked  Seems that I have to use this when I connect with system user later on in the wizard.
    - Step 2 Manage Warehouse Builder workspaces, checked
    - Step 3 Create a new Warehouse Builder workspace
    - Step 4 Create a workspace with a new user as workspace owner, checked
    - Step 5 DBA Information: user system, Password: xxx
    - Step 6 Enable Optional Features: Non selected
    - Step 7 Workspace Owner(new)
    - Workspace Owners’s User Name: owb_owner
    - Password x 2
    - Workspace Name: workspace_dev
    - Step 8 OWBSYS Information:
    - User Name: OWBSYS (OWBSYS and OWBSYS_AUDIT accounts are unlocked)
    - Password: xxx
    - Then I click next, and the error information are as follow:
    “OWB software with the compatible version must be installed locally on the database server machine. If it is already installed, please acquire the DBA user credentials, an run the SQL script owb/UnifiedRepos/remote_owb_install.sql on the database server machine. This creates a database directory named ‘OWB_REMOTE_ADMIN’ that the remote installation will access to read the database servers OWBHOME/owb/bin/admin directory. Relaunch the Repository Assistant or execute OWB scripting command OMBSEED to seed the repository.
    Since we have installed the Oracle 11g rel 2 database, the OWB are already in that installation. I also tried to run the remote_owb_install.sql and applied the OWBHOME/owb/bin/ when running sql. I still have the same problem.
    Anyone experienced this and have a solution to solve this?

    Hi Scott,
    SQL> select privilege from dba_sys_privs where grantee='FLOWS_030100';
    PRIVILEGE
    DROP PUBLIC SYNONYM
    SELECT ANY TABLE
    DROP USER
    UNLIMITED TABLESPACE
    DROP TABLESPACE
    CREATE JOB
    ALTER SYSTEM
    EXECUTE ANY PROCEDURE
    CREATE PUBLIC SYNONYM
    ALTER SESSION
    10 rows selected.
    SQL> Select granted_role from dba_role_privs where grantee='FLOWS_030100';
    GRANTED_ROLE
    RESOURCE
    CONNECT
    SQL>
    I am sure nothing has been revoked.
    Is there a script I have not run?
    Regards
    Michael

  • Error in creating control file for 2 node RAC database

    SQL> CREATE CONTROLFILE set DATABASE "SBLS" RESETLOGS NOARCHIVELOG
    2 MAXLOGFILES 192
    3 MAXLOGMEMBERS 3
    4 MAXDATAFILES 1024
    5 MAXINSTANCES 32
    6 MAXLOGHISTORY 292
    7 DATAFILE
    8 '+SBLDATA/SBLTST/DATAFILE/system.dbf'
    9 '+SBLDATA/SBLTST/DATAFILE/sysaux.dbf'
    10 '+SBLDATA/SBLTST/DATAFILE/undotbs1.dbf'
    11 '+SBLDATA/SBLTST/DATAFILE/undotbs2.dbf'
    12 '+SBLDATA/SBLTST/DATAFILE/users.dbf'
    13 '+SBLDATA/SBLTST/DATAFILE/sbl_data.dbf'
    14 '+SBLDATA/SBLTST/DATAFILE/sbl_idx.dbf';
    '+SBLDATA/SBLTST/DATAFILE/sysaux.dbf'
    ERROR at line 9:
    ORA-01967: invalid option for CREATE CONTROLFILE
    Please advice.

    ASMCMD> pwd
    +sblDATA/SBLTST/DATAFILE
    ASMCMD> ls -l
    Type Redund Striped Time Sys Name
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y SBL_DATA.258.815440497
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y SBL_IDX.259.815441389
    DATAFILE UNPROT COARSE DEC 26 11:00:00 Y SYSAUX.272.802440861
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y SYSAUX.282.804173239
    DATAFILE UNPROT COARSE MAY 29 13:00:00 Y SYSTEM.262.804173239
    DATAFILE UNPROT COARSE DEC 26 11:00:00 Y SYSTEM.271.802440859
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y UNDOTBS1.270.804173239
    DATAFILE UNPROT COARSE DEC 26 11:00:00 Y UNDOTBS1.273.802440861
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y UNDOTBS2.265.804173409
    DATAFILE UNPROT COARSE DEC 26 11:00:00 Y UNDOTBS2.279.802441035
    DATAFILE UNPROT COARSE MAY 29 14:00:00 Y USERS.264.804173239
    DATAFILE UNPROT COARSE DEC 26 11:00:00 Y USERS.274.802440861
    N sbl_data.dbf => +SBLDATA/SBLTST/DATAFILE/SBL_DATA.258.815440497
    N sbl_idx.dbf => +SBLDATA/SBLTST/DATAFILE/SBL_IDX.259.815441389                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Error creating CONTROL FILE

    I have a problem while installing 9iAS R2 on RH LInux 8.
    When database configuration assistant starts during the installation of 9iAS infrastructure, it gives an error "Error creating CONTROL FILE" followed by many other errors.
    Please help me out.
    Zulqarnain

    I had the same problem, but with RH9
    To fix, I ran orapwd from the $ORACLE_HOME/bin directory to create a password file called orapw. Then I moved this file to the directory where the configuration assistant complains it cannot find the file. Fixed. Obviously, just ignore the errors from the configuration assistant about the CONTROL FILE until it tells you the location of the file it is looking for.

  • ORA-00205: error in identifying control file..after installing ASM

    Hi
    I haveoracle database 10g running on a redhat4 mechine.
    i have installed ASM and migrate my database to ASM.
    I haven't any problem and everything was fine till i reboot the mechine for the first time after
    installing ASM.
    I got the ORA-00205: error in identifying control file, check alert log for more info
    error when database was restarting
    any one can help me out of this problem
    many many thanks in advance

    eventually I figured out what the problem is.
    The problem is about my dbora file used to start my database.
    this is the whole story!!!
    I have a oracle 10gR2 installed on Redhat linux AS 4.
    I have configured my database to work on ASM.All the configuration have set properly
    and every thing is fine except the Automatic starting the database in time
    the mechine is restarted.
    when i restart the mechine with nothing in dbora(used to automatically start the database)
    and start everything after logging into oracle user(listener ,database,Enterprise manager)
    no problem(i can see my ASM instance database instance throught Enterprise managaer).
    but when i use dbora to do that i get this error appear in enterprise manager
    ORA-12528: TNS:listener: all appropriate instances are blocking new connections (DBD ERROR: OCIServerAttach)
    this is the content of dbora:
    s script is intended to allow the automated
    # startup and shutdown of an oracle database server.
    # Author: Sean O'Donnell <[email protected]>
    # the user that oracle runs as (default: oracle)
    ORACLE=oracle
    # database instance id
    ORACLE_SID=orcl
    # ORACLE_HOME (file system) path
    ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
    PATH=${PATH}:$ORACLE_HOME/bin
    export ORACLE_SID ORACLE_HOME PATH
    case $1 in
    'start')
    su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl start"
    su - $ORACLE -c "$ORACLE_HOME/bin/dbstart"
    su - $ORACLE -c "$ORACLE_HOME/bin/emctl start dbconsole"
    'stop')
    su - $ORACLE -c "$ORACLE_HOME/bin/emctl stop dbconsole"
    su - $ORACLE -c "$ORACLE_HOME/bin/dbshut"
    su - $ORACLE -c "$ORACLE_HOME/bin/lsnrctl stop"
    echo "usage: $0 {start|stop}"
    esac
    exit
    What do u think could be the reason?!!!!
    thank you in advance

  • Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
    Just in case, let's try the fixit from the following document:
    Fix problems with programs that can't be installed or uninstalled

  • Urgent: DBrefresh error 354 while creating control file, oracle9i, SAP R3

    Hi experts,
    I have created trace file in Source system and moved the same to target system and edited and then while executing the trace file to create control file the following eeror is coming
    my trace file is like this. . .
    STARTUP NOMOUNT
    CREATE CONTROLFILE SET DATABASE "P47" RESETLOGS ARCHIVELOG
    --  SET STANDBY TO MAXIMIZE PERFORMANCE
        MAXLOGFILES 255
        MAXLOGMEMBERS 3
        MAXDATAFILES 336
        MAXINSTANCES 50
        MAXLOGHISTORY 8168
      '/oracle/P47/sapdata9/btabd_63/btabd.data63',
      '/oracle/P47/sapdata9/stabi_27/stabi.data27',
      '/oracle/P47/sapdata9/btabi_122/btabi.data122',
      '/oracle/P47/sapdata9/stabd_28/stabd.data28',
      '/oracle/P47/sapdata9/btabi_123/btabi.data123',
      '/oracle/P47/sapdata9/btabd_64/btabd.data64',
      '/oracle/P47/sapdata9/btabi_124/btabi.data124'
    CHARACTER SET WE8DEC
    i run command like this:
    SQL> @/oracle/P47/saptrace/usertrace/control.sql
    ORACLE instance started.
    Total System Global Area          1249618992 bytes
    Fixed Size                                     732208 bytes
    Variable Size                             788529152 bytes 
    Database Buffers                       459022446 bytes
    Redo Buffers                                1335296 bytes
    <b>354</b>
    when I press 'enter' again SQL prompt is comming
    Please help
    rgds

    Hi markus,
    thanks for reply . .
    control files are not created. . . .
    alertSID logs shows as follows
    orap47> tail -f alert_P47.log
    ARCH shutting down
    Thu Dec 13 13:01:51 2007
    ARC0: Archival stopped
    Thu Dec 13 13:01:51 2007
    ARC1: Archival stopped
    Thu Dec 13 13:01:54 2007
    ARCH: Archiving is disabled
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    <b>When @/oracle/saptrace/usertrace/control.sql command given in sepearate SQL window</b>
    Thu Dec 13 13:03:37 2007
    Starting ORACLE instance (normal)
    Disable cache advisory with old cache parameters
    Thu Dec 13 13:03:37 2007
    WARNING: EINVAL creating segment of size 0x000000004b800000
    fix shm parameters in /etc/system or equivalent
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    SCN scheme 3
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 9.2.0.4.0.
    System parameters with non-default values:
      processes                = 80
      sessions                 = 96
      timed_statistics         = TRUE
      shared_pool_size         = 704643072
      enqueue_resources        = 8000
      control_files            = /oracle/P47/sapdata1/cntrl/cntrlP47.dbf, /oracle/P47/sapdata2/cntrl/cntrlP47.dbf, /oracle/P47/sapdata3/cntrl/cntrlP47.dbf
      db_block_buffers         = 56033
      db_block_checksum        = FALSE
      db_block_size            = 8192
      compatible               = 9.2.0
      log_archive_start        = TRUE
      log_archive_dest         = /oracle/P47/saparch/P47arch
      log_buffer               = 1048576
      log_checkpoint_interval  = 0
      db_files                 = 354
      db_file_multiblock_read_count= 8
      log_checkpoints_to_alert = TRUE
      control_file_record_keep_time= 30
      dml_locks                = 2500
      row_locking              = always
      replication_dependency_tracking= FALSE
      transactions_per_rollback_segment= 20
      rollback_segments        = PRS_0, PRS_1, PRS_10, PRS_11, PRS_12, PRS_13, PRS_14, PRS_2, PRS_3, PRS_4, PRS_5, PRS_6, PRS_7, PRS_8, PRS_9
      transaction_auditing     = FALSE
      remote_os_authent        = TRUE
      db_domain                = world
      parallel_max_servers     = 20
      hash_join_enabled        = FALSE
      background_dump_dest     = /oracle/P47/saptrace/background
      user_dump_dest           = /oracle/P47/saptrace/usertrace
      core_dump_dest           = /oracle/P47/saptrace/background
      optimizer_features_enable= 9.2.0
      sort_area_size           = 2097152
      sort_area_retained_size  = 0
      db_name                  = P47
      open_cursors             = 800
      optimizer_mode           = choose
      btree_bitmap_plans     = FALSE
      pushjoin_predicate     = FALSE
      optimizer_index_cost_adj = 10
      newinitial_join_orders = FALSE
      optimpeek_user_binds   = FALSE
    PMON started with pid=2
    DBW0 started with pid=3
    LGWR started with pid=4
    CKPT started with pid=5
    SMON started with pid=6
    RECO started with pid=7
    Thu Dec 13 13:03:39 2007
    ARCH: STARTING ARCH PROCESSES
    ARC0 started with pid=8
    ARC0: Archival started
    ARC1 started with pid=9
    Thu Dec 13 13:03:39 2007
    ARCH: STARTING ARCH PROCESSES COMPLETE
    Thu Dec 13 13:03:39 2007
    ARC0: Thread not mounted
    Thu Dec 13 13:03:39 2007
    ARC1: Archival started
    ARC1: Thread not mounted
    rgds

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • 11i RW-50004 while creating control file...

    Dear all,
    Kindly let me know what this log file sys...
    I am trying to install 11i on OEL4.6 with 2GB RAM in VMware for Important test purpose. While creating control file in second stage i am getting this Error:,,
    RW-50004 : Error code received when running external process.
    Check log file for details.
    I have check ORALCEHOME/appsutil/log/SID/04270524.log
    Please let me know this error.
    Regards
    GAZA
    Creating the control file for abc_apps11i database ...+
    SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:10 2012*+
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    ORA-01012: not logged on+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0641: "EXECUTE" requires connection to server+
    ORA-01031: insufficient privileges+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    SP2-0640: Not connected+
    exit_code=0+
    Checking for errors ...+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01012: not logged on+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    The database has not been successfully created. Shutting down the instance ...+
    SQLPlus: Release 9.2.0.5.0 - Production on Fri Apr 27 06:23:12 2012*+
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.+
    ERROR:+
    ORA-01031: insufficient privileges+
    ORA-01031: insufficient privileges+
    Cannot create control file for abc+
    RW-50010: Error: - script has returned an error:   9+
    RW-50004: Error code received when running external process.  Check log file for details.+
    Running Database Install Driver for abc instance+

    Please make sure the user accounts for the installation (applmgr/oracle) have full privileges.
    Oracle Applications Installation Guide: Using Rapid Install -- Page 1-9
    http://docs.oracle.com/cd/B25516_18/current/acrobat/r115102ins.pdf
    If you still have the same issue, please upload all the log files to any free hosting website and post the link here so we can review it.
    Thanks,
    Hussein

  • ** Itemfield Conversion - ContentMaster Studio Eclipse - error when create

    Hi friends,
    I have installed 'ContentMaster Studio Eclipse' software in our system. It throws the following error when we click File --> New --> Project.
    Error:
    Internal error logged: Could not create IFCMFramework. CFramework control.
    Error details can be found in log file.
    Unable to read workbench state. Workbench UI layout will be reset.
    Eclipse:
    Problems during startup. Check the ".log" file in the ".metadata" directory of your workspace
    What could be the problem ..?
    Kindly help us to solve this.

    Hi,
    Check this blog
    /people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
    Thanks,
    venkat

  • Error in identifying control file

    I have successfully moved or cloned a database, but having problem with the controfile creation.
    Each time I run the create control file script and start the database, I get "ORA-00205: error in identifying control file".
    When I do "sho parameter", it tells me that contral file is ora02/oracle/oradata, but no controlfile in that folder.
    My question is when I run the following script, where is the control file saved?
    CREATE CONTROLFILE SET DATABASE "MDB" RESETLOGS
    MAXLOGFILES 20
    MAXLOGMEMBERS 4
    MAXDATAFILES 22
    MAXINSTANCES 2
    MAXLOGHISTORY 292
    DATAFILE
    CREATE CONTROLFILE SET DATABASE "MDB" RESETLOGS
    MAXLOGFILES 20
    MAXLOGMEMBERS 4
    MAXDATAFILES 22
    MAXINSTANCES 2
    MAXLOGHISTORY 292
    LOGFILE

    Problem resolved!
    I followed the instruction in How to Recreate a Controlfile [ID 735106.1].
    The part of the document I used is stated below as I just had to clean up my controlfile creation script:
    It is important to delete everything above the "CREATE CONTROLFILE" and everything after the CHARACTER SET. Ensure you leave the semi colon. ";".In the above example we are choosing the NORESETLOGS option and running the database in archivelog mode. After successfully saving the script you are now able to recreate the controlfile. When shutting down the database ensure that you shutdown with the immediate option.

  • Problem while Creating Control files while Cloning the Oracle DB

    Hi,
    I am failrly new to Oracle Administration. I have got the task of cloning our Production database into a new machine. With the help of various articles found over the web I have followed the below mentioned steps
    1)Executed the Alter database command for getting the control file copy.
    2) Taken the Datafiles,Control and redo log files copies into the Target machine.
    3) Copied the Pfile with the neccessary changes into the target machine.
    4) Edited the Create Control file syntax (generated from step 1) and executed the same on the target machine.
    Now the problem I face is that I get the following error while executing the create Control file syntax
    a)ORA-01503 - Creation of Controlfile failed.
    b) ORA-00219 - Required controlfile size 41760 exceeds max allowable size 20000.
    I am really stuck. Both my machine configurations and O/S installed are the same.
    Please advice me on how to Proceed... Thanking you all in advannce.
    Rgds,
    SN.

    Hi Jaffer,
    This is my code........ The control file has been generated by executing the syntax alter database backup controlfile to trace at the source db .
    STARTUP NOMOUNT pfile=ORADATA:ORAHOME1\ADMIN\ORACLE\PFILE\INIT.ORA;
    CREATE CONTROLFILE set DATABASE "ORACLE" RESETLOGS NOARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 2
    MAXDATAFILES 32
    MAXINSTANCES 16
    MAXLOGHISTORY 65535
    LOGFILE
    GROUP 1 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG2ORCL.ORA' SIZE 200K,
    GROUP 2 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG1ORCL.ORA' SIZE 200K
    DATAFILE
    'ORADATA:ORAHOME1\ORADATA\ORACLE\SYS1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\USR1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\RBS1ORCL.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_DAT.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_INDEX.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_LUB_DATA.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMBJ01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMAT01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BITPA01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BLUBFSINDEFX01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\TEMP01.DBF',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_TOOLS.ORA',
    'ORADATA:ORAHOME1\ORADATA\ORACLE\IMPORT1.DBF'
    CHARACTER SET WE8ISO8859P1
    # Recovery is required if any of the datafiles are restored backups,
    # or if the last shutdown was not normal or immediate.
    #RECOVER DATABASE
    # Database can now be opened normally.
    #ALTER DATABASE OPEN;
    # No tempfile entries found to add.
    #

Maybe you are looking for

  • Does adobe reader for IOS allow the use of buttons in a pdf document?

    I have tried to read a pdf with buttons on my iPad (the pdf was produced by me and edited on acrobat pro to include bottons to show/hide text fields). The buttons do not fuction when I try to read the document on my iPad. Is there a way to get these

  • GOS attachment list could not open office 2007 docs

    HI All, My client environment is still uses office 2003. but documents attached to the financial accounting documents may have office 2007 files attached. when we try to open these docs we get an error. Is there any OSS note available for the same? i

  • Full Width 'Basic' Slideshow

    I am trying to make the slideshow on my page full width, which will expand with the window size.  I have dragged to the edges of the screen but it doesn't go to edge of the screen when previewing in a browser.  Could someone please help?! Thanks, Jon

  • To have a same exchange rate in Proforma (F8) and Std Invoice (F2).

    Hi Friends, I have searched all the threads and could not find appropriate answer for the below query. Having different exchange rates in Proforma (F8) and final  invoices (F2)  causes problems and should be avoided.           Proforma invoices are n

  • Conditionally format PDF output

    Hi In my report, I use this technique to highlight in red some rows:       case when a.completed_date is null then           '<div style="color:red">'||a.action_description||'</div>'       else a.action_description end action_description,However, the