Raw device owners change after reboot the server
The raw device owner change after reboot the server. i have to adjust it manually like
chown oracle:oinstall /dev/raw/raw*
any idea to make it permanent after bouncing the Server?
MY OS is RHEL4 & Rdbms 10.2.0.1
I got my answer .
New to Linex. Need suggestions...
How i can create new file ? like i want to create file oracle.permission
should i use this command
touch <filename> or any other command?
second i want to put these entries raw device 3, 6,7,10,11 etc
shoud it work ? like in the oracle.permission directory?
# ASM
raw/raw[3671011]:oracle:dba:0660
Similar Messages
-
Raw device not seen after reboot the server
hi,
I hv upgrade kernal in linux 7.2 but when reboot system no raw device found
how can find out raw deviceFrom http://www.fors.com/orasupp/unix/37914_1.HTM
Raw Devices and Oracle - 20 Common Questions and Answers
2. How can a raw device be recognised?
In the /dev directory, there are essentially two type of files: block
special and character special. Block special files are used when data is
transferred to or from a device in fixed size amounts (blocks), whereas
character special files are used when data is transferred in varying
size amounts. Raw devices use character special files; a long listing
of the /dev directory shows them with a 'c' at the leftmost position of
the permissions field, e.g.
crw-rw-rw- 1 root system 15, 0 Mar 12 09:45 rfd0
In addition, character special files usually have names beginning with
an 'r', as shown in the above example. Some devices, principally disks,
have both a block special device and a character special device
associated with them; for the floppy diskette shown above, there is also
a device
brw-rw-rw- 1 root system 15, 0 Apr 16 15:42 /dev/fd0
So the presence of a 'c' in a device does NOT necessarily mean this is a
raw device suitable for use by Oracle (or another application).
Generally, a raw device needs to be created and set aside for Oracle (or
whatever application is going to use it) when the UNIX system is set
up - therefore, this needs to be done with close co-operation between
the DBA and UNIX system administrator.
Once a raw device is in use by Oracle, it must be owned by the oracle
account, and may be identified in this way. -
Disk " disk " does not exist or is not instantiated after reboot the server
Hi,
I have one issue with 11gR2 cluster. I have 2 node cluster on CentOS 5.5. I am using HP MSA 1000 storage LUNs and create disk group and volume for RAC setup in openfiler.
The whole setup was running fine but before few days some one has recreate the database [clusterDB] using control file. I can see this from alter.log file of "oracle" user. And somehow one node is not able to up and running.
I have no idea what is going on so just restart both the nodes and storage one by one.
After restarting I can not view my ASM disk from /usr/sbin/oracleasm listdisks.
EvenI can not see the ASMdisk from /dev/oracleasm/disks... also I try to querydisk it showing that "Disk "<diskname>" does not exist or is not instantiated"
From the master node I can see the cluster registry configuration through "ocrcheck -config"
*./ocrcheck -config*
Oracle Cluster Registry configuration is :
Device/File Name : +ACFSDG
from the slave when I run the ocrcheck ...it gives error
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage ASM error [SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
AMDU-00210: No disks found in diskgroup ACFSDG
AMDU-00210: No disks found in diskgroup ACFSDG
] [8]
Any idea what is the cause behind this? There are many errors in $GRID_HOME/log/<hostname>.log file and other referring file. I might be sure that until I enable the ASMDISK/detect the ASMDISK I can not start crs...
Shall I try with restore operation of OCR or replace option in ./ocrcheck...will it usefull?
Let me know if you have already face this issue.
Thanks...
Edited by: user12039625 on Nov 12, 2010 5:30 AM
Edited by: user12039625 on Nov 12, 2010 5:36 AMHi,
Thanks for your reply.
I have "/dev/sd*" in my both the RAC nodes and on storage machine it was showing as "/dev/dm-*" whenever I run " fdisk -l " command... and I did this through iscsi initiatior and target and also create "Create Persistent Local SCSI Device Names ".
I also create one script "iscsidev.sh" in /etc/udev and it was perfectly working. Before this issue I was restarted the server and confirm it.
script is below
==============
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
==============
Thanks...
Edited by: user12039625 on Nov 12, 2010 6:04 AM -
Problems to open a application after reboot the server
Hhi there
after some problems and rebooring the server, i cant open the appliaction anymore. i got the message "unable to connect to server"
I restarted the services allready and tried to figure out where is the problem in the log files etc. but without success.
the DB is working without problems. is it possible that the problem is in the firewall or ports? but then I'm wondering why it worked a few minutes before!
thanks for help!I don't recommend increasing this setting unless you know for sure that you are experiencing performance or significant latency issues between the HFM application server and the database server. This setting simply allows for a 2 minute timeout rather than a 60 second timeout when HFM is reading or writing to the database. You would be better off correcting the underlying database or connectivty issue. If this were your issue, you would see some messages in the HsvEventLog.log file regarding HFM's repeated but failed attempts to connect to the database server during a SQL statement.
Also, this setting can be controlled through the EPM Configurator or Web and Server Cofiguration utility as well as altered directly in the registry as you've shown.
--Chris -
After rebooting the server, SpamAssassin's recognition rate went worse
Always when I'm in need to restart the server, the spam recognition rate of SpamAssassin wents worse and many UCE mails are going through.
Does somebody has an idea why this happens and what can be done to solve this issue ? I investigated in many directions by myself, but haven't found a solution yet.Hi Pavan,
When you uncheck the .NET Framework 4.5 checkbox in the Remove Roles/Features Wizard of Server Manager, Windows will check all roles/features that may also be installed as it would need to be removed as well.
In this case, please follow these steps:
1. Run the below commands in the Server Core’s command prompt window to help you recover:
DISM.exe /online /enable-feature /all /featurename:NetFx4
DISM.exe /online /enable-feature /all /featurename:MicrosoftWindowsPowerShell
2. The above commands will re-install .Net 4.0 and PowerShell on the server. Once PowerShell is installed, you can add the Graphical Shell (Windows Explorer) using the following command:
Install-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra
3. Once the GUI Shell is installed, you will need to restart the server with the following command:
Restart-Computer
Refer to:
Removing .NET Framework 4.5/4.5.1 removes Windows 2012/2012R2 UI and other features
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Oracle SSO not showing up status after rebooting the 10gapplication server
Hi all,
I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
For Infrastructure
1. To make the metadata repository up and running
Log in as an oracle user
#cd /home/oraASInfra/bin
#export ORACLE_HOME=/home/oraASInfra
#export ORACLE_SID=mamcinfr
#./lsnrctl start
#./sqlplus
Enter userame: sys as sysdba
Sql>startup
Sql>Exit
2. To start the other components of the infrastructure
Log in as an oracle user
#cd /home/oraASInfra/opmn/bin
#./opmnctl startall
3. To start the iasconsole
#cd /home/oraASInfra/bin
#./emctl start iasconsole
For Middle tier
1. To start the middle tier components
Log in as an oracle user
#cd /home/oraASmt/opmn/bin
#./opmnctl startall
2. To start the iasconsole
#./emctl start iasconsole
In the MT all the components is showing up status
In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
There is no any port conflicts between the infrastructure and MT.
Is there any post installation tasks has to be done after the installation?
please help me to sort out the issue.
thanks,
C Saju1. After RapidWiz with 11.5.10.2 CDs, do we need to
do any post installation step to make the browser
load Oracle Forms. Do we need to create our own
certificate using envshell.cmd and then adjkey. And,
apply that to Jinitiator using adjbuild.sh and
regenerate JAR files using ADADMIN Jar ( I am so far
assuming that these steps are not necessary after for
rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
2. Do I need to apply the Oracle App 11i 11.5.10.2
Maintenance Pack after installing using RapidWiz from
the main set of CDs labeled as 11.5.10.2No
3. Should I try by installing manually latest
Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
adjkey -initialize
This will create the following files:
- adsign.txt directory $APPL_TOP/admin
- appltop.cer direcotry $APPL_TOP/admin
- identitydb.obj directory $HOME of the user that launch adjkey
Metalink note: 365735.1 should be helpful.
Good luck -
- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated!- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated! -
The annoying login screen after rebooting App server
Is there a way to disable to login prompt after reboot the App server? IE offers
to remember it, but it doesn't. Thanks for any info!
DineshHi,
I have answered a similar question in How to logout an user when the browser is closed?
Thanks,
Sharmila -
SCVMM Service (2012) does not start after reboot VMM-Server
VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved. -
Links to Folders on a external drive changed after reboot
I've got the following problem:
I've created some links to folders on a external (Firewire 800, Lacie 2big Quadra) drive in my Finder.
At first glance they are working fine and looking good, listened under places.
But after Reboot the links are changed to random files or folders on my usual Mac HD. The links pointing to folders on the internal HD are working fine!
For example:
before: "Work, Projects, Invoices" – after: "proloj.msd;italianWS;logqhrscv.ll"
This happened (almost) everytime, so i can't really work with my places
I tried to start the external drive up, before the Macbook starts, but no change.
Is this a Finder bug or a problem with the external HD? Otherwise it's working very well. I heard some Rumours about the latest 10.5.6 Update and Problem with the finder?
BTW - i got all updates from AppleIt happened again – but now i got pictures
After freshly adding the links:
http://dort.entlang.com/before.png
And after reboot:
http://dort.entlang.com/after.png
And the new links are not so random as it seems! "lpoptions.1.gz" is always the first entry. -
OAS Enterprise Manager shows false Hostname after reinstall the server
Hy,
we have an OAS 10.1.2.0.2 with and 10g (10.2.0.1.0) Database.
Ater a systemcrash we had to reinstall the DB (the dbf-Files are from an backup) and OAS.
we decieded to rename the server.
But now we have the following problem: the Enterprise Manager show the old Hostname.
I see the thread for OAS Re: Oracle Reports Stop Working after Join the Server to the Domain !!!
which points to the script "cmd /c chgiphost.bat -mid"
Is there a similar "Script" for the DB?
(I searched whithin the dbf-files and found lots of old hostnames...)
Thanks in advanceFor database is a different procedure, chgiphost is for OAS only, if you want to check this for database, you could, either go to DB forum and ask same question, or look in the admin guide for the DB you are using. There is going to be the way to make this changes.
Regards. -
Portcost value changes after reboot on Cat OS
here is the command on my switch
set spantree portcost 3/1-48 3019
after reboot have noticed many times.. the value changes to someother random value..
Can any one explain whats the reason behind this..
Thanks.
Mahesh.Hi Mahesh,
Howdy!!
Can you please confirm that after reboot there is a change in path cost of port cost. As you have manually configured the port cost is should not change for that switchport but yes path cost may change after reboot as switch may found some other best path to reach the root bridge. All depends on topology and your network design.
Just want to confirm when the switch is rebooted does the value you have configured in the command changes in your config or you are checking this with a "sh spantree" command?
Regards,
Ankur -
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
How to access a JS changed attribute on the server side?
hi all;
if i change an attribute on a custom component via java script on the client side.
how can i access the changed value on the server side?
in what method will i have the access to this changed field?
thanks in advance.You can hardcode the ID of the component in the backingbean (or some propertiesfile) and use ViewRoot.findComponent(componentId). Using the binding is (much!) more elegant anyway.
-
Oracle doesn't started when When I reboot the Server.
Dear All,
I have installed 10g using ASM and Oracle-managed files on a Windows Server 2003 (Second Edition , Service Pack 1 ) system . I have put no data in, and I take the defaults. It works fine - until the system reboots.
Oracle doesn't started when When I reboot the Server.
Here is what I get from sqlplus, following the instructions to start an ASM instance:
SQL*Plus: Release 10.1.0.2.0 - Production on Mon Oct 11 10:47:53 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA0/10g/spfile10g.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA0/10g/spfile10g.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
Thanks for helping,
Debraj BanerjeeIt look like your ASM instance is not yet started. Try the following:
$>export ORACLE_SID=+ASM (set ORACLE_SID=+ASM if you are on Windows)
$>sqlplus /nolog
SQL>startupThen you start up your other instance.
Maybe you are looking for
-
When I open one pdf, I get dozens of them and a message to close some in order to proceed. But all the close buttons are grey, so I have to Force Quit. I work on a Mac Pro and my platform is OS X 10.5.8. I've had no problems with Reader until this st
-
HT4902 I don't want my contacts to move to iCloud. Is that possible?
I'm changing my organizations mobil me account to iCloud. Mostly we want the photos we've posted to mobile me. But I'm using my computer to make the move and I'm concerned iCloud will upload my contactacts from my computer. How do I prevent that? fra
-
Iphone 5c 8.1.2 not showing in osx 10.7.5 finder
Good afternoon, I'm not sure what is going on. I used to be able to see devices in the finder but it is no longer showing my iphone. It is showing a flashdrive. I changed cords and ports to no avail. However, when I open itunes the iphone shows u
-
Getting struk while installing Database Instance in DB package
Hi, i am getting struk in the phase of unpack SAP Archives while installing DB Instance in DB pakage in cluster system. that error showing like INFO 2008-08-01 13:25:06 [syuxcdir.cpp:177] CSyDirectoryImpl::remove() Removing directory
-
Time and date clock for web site
hi all I am very new and mean very new I am building my first wed page and I am looking for a date/time clock thing to add to the site So the question has any one got one I can use or how do you write th tag for it Cheers Det