Raw Material Costing with Overhead, Product Cost Planning

Hi,
I have an issue applying overhead to purchased raw materials. We need to apply this overhead for only a certain materials. So, I have defined a overhead key/overhead Group, and assigned the group in the material master of the raw material. The overhead is 2% freight on raw material costs.
In the std.costing variant, I have assigned the costing sheet under Overhead on material components tab of the corresponding valuation variant. I have also included the Freight OH in the cost component structure.
However, when I run the costing with CK11N for the raw material, it is showing only the raw material cost, not the overhead.
What could be the problem?
I appreciate your help.
Thanks,
Ram

Is the overhead rate a percentage type or quantity based?
Have you maintained both actual and plan rates (1 & 2) under define % based OH rates or Qty based OH rates accordingly?
Does the validity date (in define OH rates )cover the date of costing?
Is the Costing sheet assigned to the valuation variant at plant level?
Is the OH base in the costing sheet includes the cost element of the raw material?

Similar Messages

  • Can we do poduct costing with out using cost sheet  and overhead rates

    Hi,
    can we do product costing with out using cost sheets and overhead rates.
    In that cast , how the cost estimation happens ?

    Hi,
    a costing sheet is used to calculate (on a base) overhead values. If you dont need / want to use this functionality just create/use a costing variant where not costing sheet is assigned.
    Use this costing variant in CK11N or KKPAN, depending if ou have a quantity structure or not.
    best regards, Christian

  • Allocation of cost from service cost center  to production cost center

    Dear sir ,
    Will I use to distribute the cost from service department to production department  and that cost centers also using for activity planing will get currect result in product costing ?

    Hello,
    Can you clarify what you want to do ?
    Allocation of cost from service cost centers to production cost centers can be done with the help of Assessment / Distribution cycles and you can do a activity planning using the same costs as well. The steps for activity planning would be as under:
    1. Create primary cost planning in the service and production cost centers (KP06)
    2. Create activity planning in the production cost centers (KP26) without any rate
    3. Run assessment / distribution cycles to transfer cost from the service cost centers to production cost centers (KSUB / KSVB), in case you are not transferring based on activity quantity then also do SKF planning in KP46
    4. Run plan cost splitting in case you have more then one activity type (do config for splitting structure beforehand) (KSS4)
    5.  Calculate Plan price for the production cost center activity types (KSPI)
    BR // SG

  • Move the stock from the raw material storage type to production storage typ

    Hi
    How to move the stock from the raw material storage type to production storage type.
    note that both stoare type be in same storage location only.
    pls reply me

    Hi Raj,
    I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
    If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
    which you could do with posting change document. This doesnt reduce your WM stock.
    If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
    this reduces your WM stock.
    hope it helps.
    Regards
    Harish

  • Raw mat and procured finish product cost

    we need to run cost run for both raw material and product, we want have the following scenario:
    first mark the raw mat. cost run,  then our finished product will get the future price of raw mat and base on BOM to update the future price of finished product.
    after we mark finished product, we then release raw mat standard price and subsequently release finished product.
    is any solution we can define  costing variant for above scenario?
    we have another scenario, we need to run costing run for finished good A, but this product A 's BOM contain only one procured finished product B, B doesn't have BOM and purchase info record, how can we change product B 's price, so finally finished product A 's standard price will be updated upon costing run?

    Hi ,
    In Costing Variant .. we have a Tab for valuation variant . In the valuation variant type , we have seperate valuations for raw Materials , activities, subcontracting etc .
    Cost Estimate with Quanity Structure will refer to the Costing Variant and compute costs .. Hence , maintain Costing Variant and Valuation Variant properly..
    This will solve both your issues..
    Kindly revert back for any further questions..
    Regards
    Sarada

  • Costing Report summarized production cost by Finished Goods Material

    Dear Expert,
    I am looking for a report that can summarized the production cost in production order by Finished Goods Material Number.
    or a report that can show me the cost components incurred related to a Finished Goods Material.
    Can any expert enlighten me? please help.
    Thanks a lot.

    Hi
    I would recommend the product drilldown reports in KKO0...
    For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
    After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
    It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
    Regards
    Ajay M

  • Raw material not using for production

    Dears
    I have a raw material which will be a line item for different FERT
    But some particular FERT i don't want to this raw material is use for costing and planning and consumption
    Please tell me how we can map this
    I try  in BOM Item status we can select not relevent for costing as well as in material master can be select asP D ,But the problem is that in some FERT i will use this raw material for costing as well as planing ,consumption etc...
    Any hints please...
    Abu Fathima

    Bulk material is normally included in the BOM for information purpose. It normally has not impact on planning, costing, consumption. Materials like grease, washers etc are used as bulk. For what you asked in your first post, bulk material concept suits the best.
    You need to remember that if you set bulk material indicator in BOM (it is set in BOM only if in certain fert materials you don't want that component material to be planned costed and consumed) or material master ( for all Ferts), it will not get copied to component overview of production (meaning, you cannot see it in production order, but you can see it in BOM).
    But you can make it appear in production order by changing the setting Excl. Bulk Material in BOM explosion in OPPQ  and/or OPPR. In this case when you create production order it will appear in the component overview and it will also appear in the order reservation but... movement allowed field will be blank , meaning you cannot post good consumption for the bulk material even if it appears in component overview. So it is not visible in MD04 or MD05.
    Another thing to note is there is a third place you can set bulk indicator, you can set any material as bulk in component overview in CO02, it will not be planned, costed or consumed.
    You do not control those things with item catagory in BOM
    For R&D, the normal procedure is creating an Engineering BOM (Usage 2). But if you want to use production BOM's for R&D also, you need to go to OS20 and for BOM Usage 1 (for Prodution), change + to .(period)  and now go to CS02 and uncheck production relevant for the items you want to not to be considered for production (planning and consumption) and uncheck costing. Then check Engineering/Design Relevant. This should fulfill your need and also looks politically correct because you're just not bulking it out.
    Edited by: Jeevan Sagar on Feb 24, 2012 12:54 AM
    Edited by: Jeevan Sagar on Feb 24, 2012 12:59 AM

  • Target Cost Verion in Product Cost

    Hi,
    I'm not able to create Target Cost Version (1,2,3.....) in variance Calculation pertaining to Product Costing.
    I'm getting this message:
    Version 1000 1 not intended to be used as the target cost version
    Message no. KQ243
    Diagnosis
    The specified target cost version has not been flagged in central version maintenance as suitable for variance calculation.
    Procedure
    1. Check the entries in the central version table.
    2. If appropriate, flag the version as suitable for variance calculation.
    Please help & guide urgently.
    Regards,
    Viki
    [email protected]

    Try running a variance analysis, and see if it civd you an error message. typically this occurs when a SCE estimate was created after the process/production order was created. So check the dates of the two orders that you have, and compare with the date of the SCE CREATION.

  • Raw Material V/S Finish Product

    Hi Experts,
    Bellow i am giving the my scenario, kindly check it
    I am creating 100 FG
    For that FG i issue 100kg Raw Material
    After Production i got 100Nos. FG
    But in KG i got only 80 Kg., Because 15 Kg. is Rejection And 5 Kg. is Process Loss.
    I have problem with process loss , where and how can i track this process loss .
    Thanks
    Utkarsh

    Dear Utkarsh,
    Because 15 Kg. is Rejection And 5 Kg. is Process Loss
    1) Can you let us know, in confirmation screen how ur giving rejection & process loss
    2) based on above experts can give some inputs
    3) more if ur going with rework, scrap or by-product process
    4) you can track in COOIS against Prd order
    Regards
    Madhu

  • Sub Contract (operations) Cost Capturing in Product cost

    Hi Guys,
    I have a problem in  cost capturing for sub contract opertaions.
    Scenario is : I am working on product Costing. I want to caputure the cost of various product for various opeations, this I achived through activty type. But my problem is some of operations (for making the product) has been given to outsourcing through open PO and the payment to contractor is paying by unit rate(price rates are different for different operations).
    Could anybody explain me the process or settings required to capture the cost of the product which my client is paying to outsource contractor.
    Regards
    Srinivas

    Hi,
    1. Please define that particular activity as external operation in routing
    2. Flag it as subcontracting
    3. Assign a Material Info record to this operation.  Because the cost is picked up from Material info record in this scenario.
    Just talk to your PP folks.  They will definitely will guide you in Routing settings in this regard
    Please award points suitably
    Best Regards
    Surya

  • Raw material procurement based on the LTP Plan

    Dear Friends,
    How can I create a procurement proposals based on the LTP Plan. For example for material A, I am doing the LTP planning for entire Year. As per the LTP plan I got the Raw material requirements. I don't want to make the total plan as active. That means I don't want to create PIRs for my finished material A for the entire year. But  as per the LTP plan of finished material A... I want to create a procurement proposals for the raw materials for the entire month through schedule lines... How can we do it?
    If any further clarification is required... please let me know.
    Regards.

    Hi,
    Based on the forecast for the material A, the simulative planned orders will generated for its raw material duirng the LTP run.
    If you want to convert hte planned proposal into PR then you can run MD43 for the particular Raw material.
    Before running MD43, in MS04 - set firming date and then run MD43, planned orders will get converted to PR (firmed). Then run LTP again using MS02 (then the planned orders get deleted)
    Please check and come back if you need any clarification
    Thanks,
    JK

  • Issue Relating to Power Cost in Daily Product Costing

    Hi,
    We are doing daily product costing. Here we want to allocate the power units of service to production cost centers proportionately on daily basis. Can anyone tell me is there any option in SAP and we need to go for development.

    hi,
    Power usage or cost can be apportioned only monthly wise not possible on daily basis. U can run the distribution or assessment cycle only for month wise, but not on daily basis.
    Regards,
    Sreekanth

  • "Costing Date To" Product Cost

    Hi Gurus,
    I have a problem about product cost.
    Can it extend the "Costing Date To" without recalculating a CCST?
    Thanks
    Nik

    Hi
    No ways to do that.. you need to recalculate
    br, Ajay M

  • Multiple Activity Types with one Production Cost Centers

    Dear Experts,
    I have One Cost Center 2 Activity typesu2026I can plan in kp06 in single shot thatu2026
    1Ctr-1ActvtyRs.100 and 1Ctr-2Actvty----Rs.200u2026.(Same Cost Elements)
    Here my confusion is while doing actual posting we can post cost element to Cost Center i.e.Rs.300 to 1Ctr.
    Here how I can map that 100 belongs to 1Activity and Rs.200 belongs to 2Activity because there is only cost center.
    I know that solution is simple we can maintain separate cost center for both activity types i.e 1 to 1 mapping of cost center to Activityu2026So Actual posting weu2019ll be fineu2026.
    Then what is use of Kp26 to maintain 1 cost center to multiple activity types?
    Kindlyu2026..Clear my problemu2026
    Regards,
    Balaji Bhonsle.

    Hi Balaji
    You have pointed out a valid concern.. There is a solution to it as well, however, very cumbersome and less practical
    In OKKP - You allow some control indicators i.e. CCA, IO, PCA, COPA, etc.. Here, you need to allow Activity Type as Addiitional Account Assignment Object.... (This is below Cost Center Accounting)
    While booking expenses from FI, you can specify the Act TYpe along with the cost center... Provided you have that much patience and it is identifiable....
    Also, you can assign act type in Asset MAster so that while posting depreciation in AFAB, the same gets assigned to Act Type
    Br, Ajay M

  • Can anybody help me with the product costing report... URGENt!!!!!

    Hi,
    Can anybody help me with the logic. teh present logic is given below. But as per the new requirement in the Selection screen when I add Material as Select Options then Logic should "expecting to get the report either in Product Group or (single/multiple/range) Material" . Please reply ASAP.
    get the list of product groups based on the range entered by the user.
      SELECT KSTRG FROM CKPH INTO TABLE I_KSTRG
                   WHERE KSTRG IN SO_KSTRG.
    for each product explode the hierarchy get all sub product groups
      LOOP AT I_KSTRG.
        CLEAR I_CKPH. REFRESH I_CKPH.
        CALL FUNCTION 'K_CKPH_GET_HIERARCHY'
             EXPORTING
                  DATBI     = '99991231'
                  KSTRG     = I_KSTRG-KSTRG
             TABLES
                  CKPH_I    = I_CKPH
             EXCEPTIONS
                  NOT_FOUND = 1
                  OTHERS    = 2.
        IF SY-SUBRC EQ 0.
        save all unique product groups within the hierarchy.
          LOOP AT I_CKPH.
            MOVE 'EQ' TO F_KSTRG-OPTION.
            MOVE 'I' TO F_KSTRG-SIGN.
            MOVE I_CKPH-KSTRG TO F_KSTRG-LOW.
            COLLECT F_KSTRG.
            MOVE I_CKPH-KSTRG TO KSTRG-LEVEL2.
            MOVE I_CKPH-UEKTR TO KSTRG-LEVEL1.
            COLLECT KSTRG. CLEAR KSTRG.
          ENDLOOP.
        ENDIF.
      ENDLOOP.
    SORT KSTRG BY LEVEL2 LEVEL1.
    check if there are product groups extracted.
      CLEAR Z_LINES. DESCRIBE TABLE F_KSTRG LINES Z_LINES.
      IF Z_LINES GT 0.
    get the materials attached to each product group.
        SELECT KSTRG WERKS MATNR
          INTO CORRESPONDING FIELDS OF TABLE I_CKPE
          FROM CKPE
          WHERE KSTRG IN F_KSTRG
            AND WERKS = PA_WERKS.
      IF NOT I_CKPE[] IS INITIAL.
    get the order info order number & object number
          SELECT AFPOMATNR AUFKOBJNR
             INTO CORRESPONDING FIELDS OF TABLE I_AFPO
             FROM AFPO AS AFPO INNER JOIN AUFK AS AUFK
             ON AFPOAUFNR = AUFKAUFNR
             FOR ALL ENTRIES IN I_CKPE
           WHERE AFPO~MATNR = I_CKPE-MATNR.
        ENDIF.
        SORT I_AFPO BY MATNR.
        LOOP AT I_CKPE.
      get the division for the material.
          CLEAR: Z_SPART, MARA.
          SELECT SINGLE SPART
                   INTO Z_SPART
                   FROM MARA
                  WHERE MATNR = I_CKPE-MATNR
                    AND MTART = 'ZTFG'.
          MARA-SPART = Z_SPART.
        only proceed with processing if division is within users selection
          IF Z_SPART IN SO_SPART.
            LOOP AT I_AFPO WHERE MATNR = I_CKPE-MATNR.
              CLEAR: Z_MATERIAL_FLG, Z_EXPENSES_FLG, Z_SCRAP_FLG,
                     Z_OUTVAR_FLG, Z_ACTIVITY_FLG.
              LOOP AT I_COEP WHERE OBJNR = I_AFPO-OBJNR
                              AND  VRGNG NE 'KOAO'.   "changed by Kasturi
                PERFORM GET_DATA_FOR_REPORT TABLES I_DATA I_DATA_QTY.
                ENDLOOP.
              ENDLOOP.                       "afpo
            ENDIF.                           "division check
          ENDLOOP.                           "ckpe
        ELSE.
      no product groups extracted.
         MESSAGE i011.
      ENDIF.

    Has this been resolved?
    Your requirement is not clear. Could you please elaborate more about the output required?
    Thanks,
    F~Y

Maybe you are looking for