RAW Version 4.0 in Aperture 3.4.1 and Nikon D4 ?

Why does Aperture 3.4.1 ask me to reprocess my Nikon D4 files, saying that they are all processed with an oder RAW Version (3.0) in Aperture.
Looks like Apple hat now RAW Version 4.0 included.
Where can I find more information about the RAW Version 4.0 in Aperture.
It looks like it's changing my colors, too.
Thanks,
JO

I have not found any info about RAW 4.x in the Support -- where are you seeing the reference?
In my Aperture Library to option to Reprocess is not citing the current version.
Also, choosing to Reprosses the images from my Nikon D800 makes no decernable change in the images when I choose it.
It seems likely to me that with the addition of Skin Tone to White Balancing options, some change in be triggered. I find slight changes if I change from any other option to Skin Tones without using the dropper at all.  You might test toggling between the now three options for white balance without otherwise clicking anything else to see what if any change results.
Ernie

Similar Messages

  • Aperture v3.2.3 and Nikon D800

    I have just received a new Nikon D800. Aperture and IPhoto both do not load all photos from the camera and many times the programs hand-up.
    I have downloaded the latest add-on to be handle the Nikon D4.
    Any available solution?

    Hi Leighton,
    also using a D800 and haven't experienced any problems with the image format after imports using Aperture 3.2.2. I import by using a standalone CF card reader and sometimes using the iMac build in SD card reader. I went back to 3.2.2 as 3.2.3 continuelly crashed (but there's another topic for that).
    As far as I have noticed all images imported without problems and all the metadata does seem to be there. This includes the focus points except for images I took with manual focus. As I shoot and import more images I will keep checking and let you know if I do experience problems.
    Did you retry to reprocess the masters when it failed to see whether it was a problem during import only?
    Often editing of the D800 files is similar to editing D700 on my iMac 2009 model - with Intel i7 and 8Gb memory. But I sometimes experience extreme slowdowns while (mask) editing D800 files. Not sure yet when it pops-up. Especially while masking it sometimes freezes for about 30 to 45 seconds with a very high cpu load (between 400 and 600%) and it seems without any disk activity. If I redo the same operation it doesn't happen again.

  • Export RAW file from iPhoto to Aperture

    I want to start using Aperture 2 for my photo editing, so I need to import a number of RAW photos that are currently stored in iPhoto. This seems like it should be a simple enough process, but the different methods I have attempted have only resulted in a JPG version of the photo being imported.
    I have spent quite a bit of time perusing previous posts and haven't been able to find an answer, so any help or direction would be greatly appreciated!

    I don't think there is any reason to export the photos from iPhoto first. Aperture can browse the iPhoto library and will allow you to drag and drop the original files.
    In Aperture:
    1. Pull down File > Show iPhoto Browser.
    2. Find the photos you want, highlight them by Shift+clicking several in a row or Command+clicking discontinuous photos. Make sure the extension on the file corresponds to the type of RAW file your camera shoots (.CR2 for Canon, .NEF for Nikon, etc).
    3. Drag and drop the selected files to the Library icon in the Projects list. This will create a new project called "Untitled Project" that contains your photos.
    Regards,
    Michael

  • How to apply white balance from jpeg to raw version

    I always shoot in RAW + jpeg format.  Many times the jpeg will work fine and I still have the RAW if I want to take the time to tweak things a bit more.
    But sometimes the jpeg stumbles on a white balance that works well for a particular image.  If I want to apply that same balance to the RAW version, I would like to be able to read what that color balance setting (in K degrees I assume) is so I can copy it.
    Is there a way to find that info somewhere?  The exif will only give you the name of the setting (Flash, Auto, Cloudy, whatever...) but not the numerical info needed to apply it in Aperture's White balance adjustment.
    I use a Nikon D600.
    Thanks very much for any info!
    Bo

    OK, progress!
    I found out from Iliah Borg on the dpreview.com forum that the utility ExifTool (or its GUI version pyExifToolGUI) will provide the R, B, G1 and G2 values for the white balance setting.  They are provided as multipliers or absolute vaules.  Example:
    WB RB Levels : 1.51953125 1.8515625 1 1
    WB GRBG Levels : 256 389 474 256
    Now does anyone know how you can enter these type of numberic values in Aperture?  The standard White Balance brick does not have input fileds for these types.

  • Aperture 3.4.1 and raw 4 update installed now many of my D700 and D800E raw files are turning in to unsupported file format?

    Only happens if the file is opened for editing and not to all files. Pictures are visible in the browser. No issuses with Aperture prior to upgrade. Any suggestions would be appreciated.

    leonieDF
    Have not been able to re-install raw 3.13 always says newer software and closes
    I have Aperture disc 1,2,and 3;
    Followed commands to re-install from #3 no change in library's unsupported images when upgraded to 3.4.1
    Uninstall again with Mac Cleaner all ?DLL files erased only library remains
    Install #3 from disc and new permissions to open library"from newer version" and all of previous images restored, but new older ones start to blink out "they do not turn black but look like you are using rabbit ears to tune in your TV, scrambled" until viewed for processing then become unsupported.
    Repaired 3.1 library and Aperture would open but not open library. Re-installed 3.4.1 many more images failing to load across entire 5700 Nef's library but not JPEG.
    Close but where is culprit?
    Raw 4 is always there even in Aperture 3.1 due to Lion OSX8
    3.4.1 is the only down loaded upgrade, new down load each time
    Raw files/cameras are D200,D700,D800E and possibly Lecia DLUX-3
    IMAC 2.4 core 2 duo
    4G 667
    Radeon HD 2600
    OSX 10.8.2
    no aperture problems since 1.0 until recent upgrades
    Thank-you

  • Different appearance of Nikon D600 RAW in Aperture 3.4.5 vs Nikon View NX2

    Hi all, here's a question/statement of an issue with Aperture 3.4.5 processing of Nikon D600 RAW images, appears the same with both Raw Camera 4.08 and 4.07 support versions.
    I'm stating that something is incorrect in Aperture's Calibration of Nikon D600 Raw images, it's not a preview or color profile issue. Exporting the original unprocessed Raw image from Aperture and ViewNX2 clearly look different. Pictures to be provided below.
    The issue is present in Saturated, or close to washed out, regions of the original image. The JPEG preview looks the same as the image in Nikon ViewNX2 but as soon as Aperture has generated its own preview the image looks quite different, and, in my humble opinion, outright incorrect. My closest guess is some sort of issue in the curves handling pixel values in the extended range. The pictures below was original taken in 14-bits per component, I shall try out how 12-bits work out.
    At this point I'm not able to figure out any adjustment or fine tuning of the image to make it look like the original as seen in JPEG preview and Nikon ViewNX2.
    The image below is a JPEG exported from Nikon ViewNX2, no adjustments were made. The image looks just like the JPEG preview within the original RAW image. Note the graceful transition from red-ish to yellow and fully saturaded (white) sun.
    Now compare the image above with the one below, which is the same image but first imported to Aperture, then exported as JPEG without any modifications. There is clearly some weird banding occurring and there is no longer a graceful blend into the fully saturated sun.
    I'm not really able to explain this in any other way than really high values, possibly in the extended sRGB range, is not handled correctly, which should be the way Nikon ViewNX2 deals with it. To the best of my knowledge, no automatic adjustments have been made in Aperture.
    Hope someone has a tip to repair this or that there's a fix for it somewhere.
    I can provide original Raw and/or higher resolution versions upon request.
    Thanks / Patric

    Thanks :-)
    I've seen some posts and discussions about Raw Processing and that all software naturally do some things different. Nikon and Canon will have the Ace on their hands as they know what the cameras really do. Although the NEF (Nikon Raw) format is proprietary I expect Apple, and Adobe, do have agreements to give them some SDK or specs so they can read it.
    That said, the artefact shown seems more incorrect than a different flavor. The banding cannot be resolved with any traditional adjustments. So, I'd be happy if anyone could
    a) Provide some tips on how to work with Curves or some other Adjustment to resolve this.
    b) Confirm they also have similar problems and if they managed to resolve it.
    c) Some Apple support tech could pick this up and follow-up internally.
    best regards

  • Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750!  Can I update ACR?

    I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750!  Can I update ACR?
    I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
    Thanks,
    Greg E

    You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
    http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

  • My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

    Any ideas?

    My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

  • Photoshop Elements 6.0 and Camera Raw Version Question

    I have been using Photoshop Elements 6.0 and it's does what I need to do.
    Revcently we bought two new cameras and the Camera Raw version 5.6 that we have installed does not support these new cameras.
    The Camera Raw list says that I need Camera Raw 6.2 for the one and 6.3 for the other (so 6.3).  But as far as I can understand, PE 6.0 will only support up to Camera Raw 5.6.
    And to support 6.3, I'd need a minimum of PE 8.0.
    Am I correct?
    Thanks

    Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your original raw files as backups and for use in the manufacturers software)
    Windows download click here DNG Converter 7.2
    Mac download click here DNG Converter 7.2
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

    I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    EOS 5D Mark II
    CR2
    5.2
    2.2
    EOS 5D Mark III
    CR2
    6.7, 7.1
    4.1
    Photoshop CS6
    7.0
    8.3
    Photoshop CS5
    6.0
    6.7
    Photoshop CS4
    5.0
    5.7
    The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
    The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
    So the CS4 will never be able to open Raw 5D Mark III files.
    Why doesn’t my version of Photoshop or Lightroom support my camera?
    Choices:
    Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
    Join the Cloud
    Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
    Photoshop Help | Digital Negative (DNG)

  • I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

    Thank you for your valuable advice. I've solved the problem right now.
    Thanks
    2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
        I have Photoshop CS 5.5 version, but I've just changed my camera and
    I can't open my raw files. I need for my new camera Photoshop CC and Camera
    Raw 8.7 version. How can I do to update the old version? Thank you
    created by c.pfaffenbichler
    <https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
    Discussion* - View the full discussion
    <https://forums.adobe.com/message/7302535#7302535>

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • Cannot download camera raw version 6.6 Windows 7 get error code U44M2P7

    Cannot download camera raw version 6.6 Windows 7. get error code U44M2P7

    70D support requires ACR 8.2 or newer, which requires an upgrade to PSE.
    I’d suggest doing a trial of PSE13 to make sure it works on your computer:
    http://www.adobe.com/downloads.html

  • Camera raw version 7.4

    Is Adobe Camera Raw version 7.4 or higher available for elements 10 or 11?

    For photoshop elements 11, except for the mac version from the mac app store, you should be able to go to Help>Updates from
    within the photoshop elements 11 editor to update to camera raw 7.4

  • Camera Raw Version 7 -- LR4 wants PS to have it, but it is not available

    Since upgrading to Lightroom 4, if I try to edit a photo in Photoshop 5.1 from inside LR4 it warns me that I might need Camera Raw Version 7 for compatibility.  But Camera Raw Version 7 isn't available for Photoshop -- the latest is Version 6.6, which I already have.
    For photos previously processed in LR3 using Process 2010 I just say "open anyway" and I don't think there is any compatibility issue at all.  But if I start using Process 2012 and then try to edit a raw photo in Photoshop I presume there will be a compatibility issue.  So I haven't started using Process 2012 while waiting for CR7 for Photoshop 5.1 to be available.  But when will it be available?
    I haven't seen any information from Adobe on this.  Since Process 2012 is the default for new photos not yet touched by Process 2010 I would think there must be more people than just me running into this issue.  Why is Adobe so silent about it even after LR4 has gone public and is being shipped? (What I mean by being silent is that searching the help and support resources doesn't turn up any mention of the issue or a date for resolution).

    cognitive93 wrote:
    Similarly I am cautious about using the "have Lightroom do the rendering" -- not being completely sure this is exactly the same as PS doing it for itself.  But this may be totally unfounded conservatism on my part -- is doing it that way really identical without creating any future issues or unwanted side effects?
    Yes...you must use LR to process the image into Photoshop until you upgrade to Photoshop CS6 and ACR 7.

Maybe you are looking for

  • Not able to find final Item in configurator R 12

    Hi Guru's I have created Model class item as CAR, Option Class items as : Tyre and Brakes. Then finished Items as Rubber Tyres, Mac Tyres and Normal Brakes, Disc Brakes respectively for Tyres, Brakes. In the configurator screen not able to find Finis

  • Session variables dropping

    I've been having this problem for a long time so I thought I'd post again and maybe get a hit this time. We run off windows cfmx 7.x now fully patched, prior to that we were on cfmx 6.x. We use session management only. Many times on a new page hit th

  • Support Pack General Question:- IMPORT_PROPER phase

    Hi All, Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import)?

  • Can someone point in the right direction for how to make a multiplayer game over the internet

    Hello, I am looking into making a game where two people who can be in different places would log on to the app, log in and can play - i.e. they would be connected over the internet. I'm looking for a hint on what is the direction to take and which te

  • How to insert/update ProductTree_Lines per B1if

    Hi everybody, I´m using SAP Business One 8.82 and the B1if 1.11.2. My Scenario should insert ProductTree und ProductTree_Lines for an item. But I can´t find a object-Id (structure) for ProductTree_Lines. Per DTW (data transfer workbench) I learned, t