RC Components Hosted Demo doesn't work

Hi,
Question to Oracle people - why ADF Faces Rich Client Components Hosted Demo doesn't work ?
Kuba

Hello KUBA,
It also happened in the Past
Its still not up, if you need to use adf demo locally on your machine, please follow this thread
you can find it here. JDev ADF Demo Site Not Working
Thank you

Similar Messages

  • Gallery Demo doesn't work in IE

    I know i'm re-posting this but i can't belive this is so. So
    i'm hoping people just didn't see my second message rather than
    simply ignoring the fact that the gallery demo by Adobe doesn't
    work right in IE (at least in mine with SP2).
    If you notice when the main image changes there's a flicker
    where it shows the previous image and only then the chosen image.
    In the thumbnails the thumbnail that's being hovered over doesn't
    stay on top of both images on either side.
    Now my question is, does this problem have a solution or does
    it simply not work in IE and that's fine by all?!!
    Best,
    Sofia

    Hi Sofia,
    I answered your original post of this question
    here.
    Lets move the conversation back to that thread so we can have
    it all in one place.
    Thanks,
    --== Kin ==--

  • F5 Networks Host PlugIn doesn't work with Firefox 4??? Any ideas on a fix??

    I need F5 Networks Host PlugIn for a Work application to load. Any ideas when this will be available for Firefox 4 or any ideas on a fix?????

    I got it to work by installing the Add-on Compatibility Reporter add-on:
    [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api Install here]

  • My BC hosted form doesn't work?

    The submission sections don't show up and the Submit button doesn’t work.

    Hi Phil,
    This type of issue usually happens if some other object is overlapping with the button. I'd suggest you to check and make sure nothing is overlapping the button. If the issue is not resolved, please provide us the link to the page and we'll further investigate the issue.
    Regards,
    Aish

  • As i'm installing itunes, I have this problem come up I have tried installing reinstalling all components and still doesn't work this is the error message?

    "could not write value quicktime task to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run verify that you have sufficient access to that key, or contact your support personnel.
    if anyone can help that would be great thanks!

    I have tried that but still doesn't work, I have right clicked the itunes setup right as administrator, still has the key problem, this time, it is the ituneshelper key same location, but ituneshelper key

  • Webutil_file_transfer and host command doesn't work

    I use a host command in forms to execute a sql-script, which creates a file on AS. After the host command I use webutil_file_transfer to ftp the created file to the client. If I try to do this again in the same session, the host command fails. I have to restart the application to get it working again. If I leave out the webutil_file_transfer I have no problems whatsoever. It looks like webutil is changing something perhaps in the environment. Anyone has the same problem (and a suitable solution)?

    I can remove the files on AS (so there seems to be no lock). After removal of the files, no new files wil be created, even if I change the name of the file that needs to be created. Only restarting the application helps.
    Raoul

  • Changed hosts file, doesn't work

    I've changed my hosts file but it doesntwork. I tried to restart my pc and uncheck-check the tcpip v4 and v6 protocol for the network adapter, but still does't work. Disabled and enabled antivirus, but nothing. Here below the test i do at the cmd prompt.
    C:\Windows\System32\drivers\etc>more hosts
    127.0.0.1 myself
    C:\Windows\System32\drivers\etc>ping myself
    Impossibile trovare l'host myself. Verificare che il nome sia corretto e riprovare.
    C:\Windows\System32\drivers\etc>

    Hi sandro.delmastio,
    What is your current situation?
    Have you tried the solution as Robert Aldwinckle mentioned?
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • File Upload Demo Doesn't Work

    Applet loads & I can select the file to upload. However, once I have selected the file to upload there is a message that says "Encoding...." for just a split second and then the applet hangs. The "Encoding..." message window has a yellow banner across the bottom warning about using an applet window. I looked at the output in the Java console and the last 10 or 15 lines describe an "AppletSecurityException: checkread".
    Yes, I did register the certificate supplied with the demo. As far as I can tell, my classpath, path, & forms60_path are correct. At least I get no errors indicating that this is the problem.
    Could it be that Jinitiator is looking in the wrong certificate registry for the certificate?
    Please help! I'm about to give up on the upload bean and start looking for alternative solutions. If anyone out there was actually able to get the filr upload demo to work, please respond and help me trouble-shoot this.
    Thanks for any help you can give.

    Still having problems....
    I downloaded the Forms 9i demos. I copied the latest 9i UploadClient.jar and UploadServer.jar files into my \orant\forms60\java folder. I unjarred, rejarred, and signed them. I am running Jinitiator 1.3.1.9 on the client. When I first ran the form I got the "Duke" message asking if I should trust the signer (Myself) and I responded "always trust". However, the form didn't show display and it appeared to hang. So I copied the 9i classes into my \orant\forms60\java\oracle\demos\uploadclient & uploadserver folders (respectively). Now the form will display, but my Java console displays the following error and the form appears to hang immediately after loading.
    java.security.AccessControlException: access denied (java.lang.RuntimePermission accessClassInPackage.sun.misc)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPackageAccess(Unknown Source)
         at sun.applet.AppletSecurity.checkPackageAccess(Unknown Source)
         at java.lang.ClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivilege[i]Long postings are being truncated to ~1 kB at this time.

  • [SOLVED] adf faces demo doesn't work with jdev 10.3.1.2

    Has anybody tried to run the ‘Introduction to adf faces/trinidad using jdev’ demo at
    http://www.oracle.com/technology/obe/obe1013jdev/10131/trinidad/adf_faces_trinidad.htm
    with jdev 10.1.3.2 studio?
    I am trying it and I am getting this error
    500 Internal Server Error
    java.lang.NoSuchMethodError: oracle.adf.view.faces.context.AdfFacesContextFactory.createContext(Loracle/adf/view/faces/webapp/wrapper/ContextWrapper;Loracle/adf/view/faces/webapp/wrapper/RequestWrapper;)Loracle/adf/view/faces/context/AdfFacesContext;
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterHelperImpl.startFilter(AdfFacesFilterHelperImpl.java:112)
         at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:111)
         at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:105)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:622)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.1) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
         at java.lang.Thread.run(Thread.java:595)
    Message was edited by:
    mauro avon

    We don't automatically migrate the adf-faces-api.jar since in a 10.1.3.x ADF Faces application this JAR is not part of your project's WEB-INF/lib directory.
    The issue must be specific to migrating this Apache Trinidad example.

  • IPhone3GS wireless components or such doesn't work?

    I recently got my iPhone3GS back after being in repair for severe water damage. Upon initial inspection all seemd to be fixed until i tried to connect to a wifi source. The screen which typiclly shows wifi options (turn on/off, different networks, etc) now shows the screen when wifi is off (one bar on the screen with the option to turn on wifi). The problem is that i cant click on the off/on slide. It seems to ne blocked, grayed out, like an option that can't be done. I tried resetting network settings, resetting all settings, restoring it, and booting from new phone. Nothing works. I'm guessing it has something to do with the wireless adaptor inside the phone or something of that nature. Anyone know what to do? what can i do to fix it? thanks.

    Send it back to the repair shop you used.

  • Demo doesn't work

    I tried the requisition demo but got a failure
    3122: Duplicate item 'WFDEMO/1' could not be created. Error Stack:
    Wf_Engine.CreateProcess(WFDEMO, 1)
    WF_REQDEMO.StartProcess(1, 1900, CDOUGLAS, BLEWIS)
    wf_reqdemo.Submit_Req(1, test, 1900, CDOUGLAS, BLEWIS)
    perhaps somthing is wrong with my installation or I forgot somthing pls help
    reagards

    The "Duplicate item" message usually means that an instance of this process with this item key already exists. Try specifying a different item key when you submit the requisition and see if that may help.

  • Firefox won't display changes to site after putting to remote host; refresh doesn't work

    I recently had to reinstall Windows 7 on my machine, and since it was wiped clean I installed CS5, reconfigured my Dreamweaver site, and made changes to our index.html page (so far).  After putting the files to my remote server, I noticed that Firefox does not display the changes I made to that file - it is showing the page last saved on my CS4 version.  Figuring this was a cache problem, I emptied it, refreshed/reloaded several times, restarted Firefox - nothing worked.
    I checked the page in IE8 and all the changes appear correctly.  I used BrowserLab to preview in IE, Firefox (same version 3.6 that I use) and Safari, and all 3 display correctly the updated version of the page.  Viewing in "live" Firefox seems to be the problem, and I've searched everywhere for answers. Help is needed and appreciated!

    Some things to try:
    1) In Firefox > Tools > Clear recent history.
    2) Try adding a last modified meta tag to your index page.
    <meta http-equiv="Last-Modified" content="07 February, 2011  at 16:43:39" />
    3) Use an anonymous proxy
    http://proxify.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Top web host report doesn´t work

    The next message appear when i try to generate a "top web host" report in SCA Reporte 3.8.0
    Incorrect syntax near ')'.
    Please i need help.

    Hi Patrick;
    I'm Xavier from Barcelona(Spain), I have teh same problem after upgrade my Apex 4.0.2 to 4.1. I print across BI Publisher, but now is impossible, when I try to print Apex send me this message :
         Error     Error processing request.
              ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
    Technical Info (only visible for developers)
    is_internal_error: true
    apex_error_code: APEX.UNHANDLED_ERROR
    ora_sqlcode: -20001
    ora_sqlerrm: ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
    component.type: APEX_APPLICATION_AUTH
    component.id: 6517320063874096
    component.name: ESTUDIVIVES
    error_backtrace:
    ORA-06512: en "APEX_040100.WWV_FLOW_PRINT_UTIL", línea 117
    ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1619
    ORA-06512: en "APEX_040100.WWV_FLOW_RENDER_QUERY", línea 1681
    ORA-06512: en "APEX_040100.WWV_FLOW", línea 7154
    I try to use APache FOP, with the same result, and try with a new version of Apex 4.1 (not upgrade) in a new server, but with the same result.
    Please Patrick, can you help me ?
    Thanks in advance.
    Xavier.

  • The http demo doesn't work on my 6600 even..

    though it asks permission to send or receive data and then hangs and I get a connection time out. (-33)
    Should it ask me to choose a gprs access point (i.e. same one that succesfully downloaded the app).?
    Any halp greatly appreciated. Also it seems pictures and lots of other behaviour is not exactly as seen in the emulator.

    I am having a similar problem. I am unable to do HTTP connection using midlet over my NOKIA 6600
    I guess my Acess points are defined currectly as i can use internet over it. Please help.
    Following is the code i m trying
    class Submit extends Thread //implements Runnable
    int score ;
    Display dsp ;
    String PhoneNumber ;
    public Submit ( int zScore, Display zDsp, String zPhoneNumber )
    this.score = zScore ;
    this.dsp = zDsp ;
    this.PhoneNumber = zPhoneNumber ;
    public void run()
    HttpConnection con = null ;
    InputStream in = null ;
    StringBuffer buff = new StringBuffer ( ) ;
    try
    String SubmitQuery = new String ( "http://127.0.0.1/test.asp?i1="+this.score+"&i2="+this.PhoneNumber ) ;
    System.out.println ( "Trying to open connection throgh HttpConnection quey is\n" + SubmitQuery ) ;
    con = ( HttpConnection ) Connector.open ( SubmitQuery ) ;
    System.out.println ( "Connected through HttpConnection" ) ;
    con.setRequestMethod ( HttpConnection.GET ) ;
    in = con.openInputStream ( ) ;
    int ch ;
    while ( (ch = in.read ( ) ) != -1 )
    if ( ch != '\n' )
    buff.append ( (char) ch ) ;
    else
    String lin = new String ( buff.toString ( ) ) ;
    System.out.println ( lin ) ;
    buff = new StringBuffer ( ) ;
    String lin = new String ( buff.toString ( ) ) ;
    //System.out.println ( lin ) ;
    Alert al = new Alert ( "Score Updated", "Your score has been submitted", null, null ) ;
    //al.setTimeout ( Alert.FOREVER ) ;
    al.setTimeout ( 1000 ) ;
    al.setType ( AlertType.CONFIRMATION ) ;
    dsp.setCurrent ( al ) ;
    catch ( IOException err )
    Alert al = new Alert ( "Error", "Errors occured while submitting score\nScore could not be submitted", null, null ) ;
    al.setTimeout ( Alert.FOREVER ) ;
    al.setType ( AlertType.ERROR ) ;
    dsp.setCurrent ( al ) ;

  • Demo servlet IsItWorking doesn't work after fresh install

    Hello,
    We did a fresh install of Oracle 9iAS 1.0.2.2 on Hp-ux 11i
    The installation completed succesfully, but
    when trying to run the demo servlet IsItWorking, we get error 'The page cannot
    be displayed'
    The apache error_log file contains following lines:
    [Thu Apr 18 17:12:03 2002] [notice] FastCGI: process manager initialized (pid
    9809)
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9811 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:03 2002] [emerg] OPM: Watcher starts with an id=9810
    [Thu Apr 18 17:12:03 2002] [warn] OPM: ADM: process 9810 created server process
    9812 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:04 2002] [notice] Oracle HTTP Server Powered by Apache/1.3.19
    (Unix) mod_fastcgi/2.2.10 mod_perl/1.25 mod_oprocmgr/1.0 configured -- resuming
    normal operations
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9811) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9819 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:18 2002] [warn] OPM: EW process rp5400:0 (pid:9812) died,
    restarting.
    [Thu Apr 18 17:12:18 2002] [warn] OPM: ADM: process 9810 created server process
    9820 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9819) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9821 (group group1, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:21 2002] [warn] OPM: EW process rp5400:0 (pid:9820) died,
    restarting.
    [Thu Apr 18 17:12:21 2002] [warn] OPM: ADM: process 9810 created server process
    9822 (group group2, module JServ), and inserted in proctable as entry 0
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:23 2002] [error] OPM:Can not find one alive process
    [Thu Apr 18 17:12:24 2002] [warn] OPM: EW process rp5400:0 (pid:9821) died,
    restarting.
    [Thu Apr 18 17:12:24 2002] [warn] OPM: ADM: process 9810 created server process
    9824 (group group1, module JServ), and inserted in proctable as entry 0
    Any idea?
    Thanks

    Hi -
    I was wondering if you solved this problem. I had the exact same issue on Win2K after I installed the Java Portlet Development Kit. Now my Apache JServ does not work.
    This is a sample of my error_log:
    [Fri Jun 07 10:48:01 2002] [notice] FastCGI: process manager initialized
    [Fri Jun 07 10:48:08 2002] [error] OPM:Can not find one alive process
    [Fri Jun 07 10:48:08 2002] [error] [client 127.0.0.1] File does not exist: /servlet/IsItWorking
    [Fri Jun 07 10:51:22 2002] [warn] OPM: ADM: Process 380 terminated using SIGTERM successfully
    I have re-checked my jserv.properties, jserv.conf, zone.properties several times and I can't see the problem. I tried to manually remove the entire PDK and go back to my original state (I saved a copy of all my config files) but it still doesn't work.
    Did you find a way to fix this?
    Thanks!!!
    Heather

Maybe you are looking for