RD 480 RAM and BOOT problem

Hi
I'm having a continuing problem, since I addded two extra Gb RAM to the original system configuration.
MB MS RD480 Neo2
CPU AMD64 X2 4200+
VGA MSI X800 GTO 256 MB
RAM 2*1Gb Kingston ValueRAM DDR 333
PSU: Akasa 550W
2*SATA WD 250 GB SATA 2
When I added two more RAM modules (2* 1Gb) the BIOS only recognized 3072Mb.
I ψontacted the technical support dept and their reply was to flash the BIOS to the latest (? beta) version, 3.3B3. And now the touble begins..... At first the PC booted (almost) fine, reporting 4096 Mb -but only in the first boot screen, because in the second one, it still reported 3072 Mb of Ext. Memory.)
Then I entered the BIOS again and changed the Boot sequence....AND after that...nothing! The PC does not boot (I think). It tries dozens of times to access the CD-ROM, and after a long, long time (five minutes or more) it beeps "normally" but the screen remains blank!
I am at a loss! Looks like the VGA card is damaged??? (MSI X800 GTO 256 MB)....
What about that?

Oh, I did it....removed CMOS battery, switched the CMOS jumper, removed the power cord... everything....
BUT the problem is still here...

Similar Messages

  • Mac Pro 2008 Memory Overheating and Boot Problems!

    Hello
    I have a mac pro early 2008 8core 2.8ghz with 20gb ram and I have 2 very frustrating problems
    1. The Mac Pro has trouble booting, every time I power on the mac pro it makes the boot noise then shuts down, I have to press the ON button at least 5 or 6 times for it to regularly boot, I have replaced the hard drive to an SSD recently to fix the problem but it stills persists. I don't know if its the riser card, the GPU or the logic board thats faulty but its driving me crazy!
    2. My Memory is overheating! again I don't know whether its my memory or the riser cards, I recently purchased an extra 16gb of ram, so I'm super confused, is this mac pro dying, because i really don't want it too! please help me out!!

    I have not received an answer to the question and the meaning of said specs remains unclear to me. Nevertheless, I installed the memory and have been running it without problems for about a month now.

  • P6N Diamond 4g ram no boot problem

    Hello, I have installed vista ultimate 64 successfully and downloaded the necessary updates and drivers for my system all on 2g of ram. The problem comes when i try to install the remaining 2g of ram. All 4g shows up on post but the system will not boot. Is this hardware or vista related? System specs are down in my signature. thanks for the help.
    Danny

    test your second pair of 2GB alone with Memtest86 and ensure no error(s) will comes.
    up memory vcore to 2.2V(SPD rated vcore for your memory) before install all four sticks.
    also check and ensure that timings assigned are default one for your memory.
    if unable to make it work, you can contact to MSI here: http://support.msi.com.tw/ to send you a new BIOS to have a try.

  • Random Freezing and booting problems

    My MBP (4 years old) randomly freezes and the only button works is the power button. It has booting problems as well
    Done already
    clean install of snow leopard
    PRAM reset
    Safe Boot (boots again after using safe boot but still freezes after a couple of minutes)
    AHT hardware test with no result
    Still freezes after 1 to 15 minutes.
    Anything else I cab do?

    Wow my first time i use this forum and a fast reply.
    Unfortunately not at home at the moment so can not give exact answers.
    When my mac book freezes the fan still works, keyboard and touch pad do not work anymore. I don't think caps lock light works but not sure.
    Have original ram and a retail SL disc.
    When I have booting problems I can see the spinning wheel and after that only blue screen. If I power off and start in safe mode and then restart again mbp will boot again for 2,3 or 4 times and then stop booting again but still freezing after a couple of minutes.
    The funny thing with the booting is after I see the blue screen I can still connect from my mac mini and browse my MBP from my mac mini.(screen sharing does not work though).
    And do not know what smart status is
    But thank you for your quick reply.

  • Windows Keboard and Booting Problem (on a Mac laptop)

    Hi, I've been putting up with a really strange (and annoying) problem that my laptop has been going through. I have a Santa Rosa MacBook Pro with OS Leopard, and I put on a Windows XP Pro (with Service Pack 2) NTFS partition. It used to work fast at first--especially booting up and logging on. I have noticed that now when I log onto Windows (no other user accounts , just mine) the wallpaper, desktop, desktop icons, start bar, all load. But when I click on My Computer it takes a good minute and a half for all the components to be displayed (like C drive , the CD drive, Shared Documents). I only have one partition which is C drive. But for a minute and a half, the flashlight icon keeps moving back and forth. Even if I click on any icon, the cursor will turn into a sandtimer but no programs will open once all the drives show up in the My Computer window.
    My initial theory was that maybe it's searching for My Documents which I shifted to one of my external harddrives. But that doesn;t seem to be it. When I log off and log back in, it loads much faster. I can open programs in 2 seconds. Also, I realized that the Apple keyboard features (which is controlling volume and brightness) works only then. If I had to boot up Windows, not only does it take long to load (although shutting down is pretty quick), the brightness and volume keys don't work. I have to set it manually through Control Panel. So now if I have to open up Windows, the ritual is that I sit around for a minute and a half (which is a very long time if u think about it) and just when it's working I force myself to log off (so the volume and brightness keys work once I log back on)
    I suppose it's worth mentioning that I had downloaded this "skin" which makes XP look like Vista, but I uninstalled it now although not completely since it needed the Service Pack 2 CD which I don't have at the moment (I'm on vacation) . I would think that could be the problem, but then why does simply logging off and on make Windows work like a charm? Is it an update glitch? Has anyone had this problem before? Could somebody please help me since I'm really tired of waiting around or this stupid thing to load (not to mention hearing myself come up with stupid theories). This has been going on for 4 and half months now. Come to think of it it's been a while since I received any Bootcamp updates from Apple (unless they just haven't released any that could fix such a problem)
    Just in case my specs are-- 2.4 GhZ, OS 10.5, nVIDIA GeForce 8600M GT, 15 inch display, 250 GB (of which 30 GB is for Windows).
    I'll be waiting for any answers/suggestions/tips/solutions. Thanks so much in advance =)

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] If possible please also try to rule out hardware / mouse settings issues.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
    [https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
    [https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]

  • Display and Boot Problem with MSI K9NGM2

    I recently purchased a system:
    - AMD Athlon 64 X2 4200 Core Duo
    - MSI K9NGM2
    - 1 GB Kingston RAM
    - 320 GB Sata seagate
    - Sony DVD RW
    - 450 Watts Power Supply
    The very first day I started having problems with my system. Sometimes it never showed a display and if it does it was not able to recognise my hard disk. I have to reboot it several times before it does. I think its the computer who decides when to boot and when not to. I got it checked and the vendor says that everything is fine , although he is also not able to respond to my problem. The Sata cabling and the Ram has also been replaced twice but still the problem persists.
    Does anyone have any answer to this problem.

    "PSU Details
    +3.3V 10A Orange , +5V 15A Red , +12 V 8A  Yellow , -12V 0.5A Blue , -5V 0.5A White , +5VSB 2A Purple"
    oh my god
    replace that "PSU" mate, (that PSU is directly for trash) get a decent one. (single rail, with high amperes on +12V (30A for example)) avoid noname/unknown,Q-Tec,Codegen brands
    Good PSU Recommendation:
    https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
    Add-on to read:
    PSU's---2 x 12v---The Dual Rail Myth
    Is your problem caused by your PSU?
    good suggestion can be found here:
    https://forum-en.msi.com/index.php?topic=105635.msg783148#msg783148
    https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
    Good PSU vs Cheap/Unamed/Budget PSU   Oscilloscope scan:
    Bad PSU:
    Quality PSU:
    Cheap PSU Codegen 350W:
    Enermax 365EG(350W):
    What would happen if your PSU can't cope with the load?
        * bad 3D performance
        * crashing games
        * random shutdown
        * spontaneous resetting PC
        * freezes during gameplay
        * PSU overload can cause it to break down

  • Frequent lockups and boot problems with 8-core Nehalem

    I just received my new Nehalem Mac Pro and have had tons of crashes already and right now I am staring at a black screen waiting for it to boot. I think it's a problem with the Radeon 4870 drivers since the last crash was while I was using Mudbox RC (I'm an Autodesk beta tester). I originally thought it was the RAM I bought from Crucial but it's a problem with the Apple supplied memory too.

    Check the instructions for reset SMC.
    Hardware part of testing? with Mac Pro 2009 I'd guess a lot of things could break (and 10.6 will force using 64-bit drivers).
    Strip out everything but stock items. AHT should be on the boot drive as well and holding down 'd' will bring it up - if you can get that far along.

  • Snow leopard (10.6.8) cursor and boot problems

    Hi all, I have a very odd thing going on with my old white 24" iMac. It crashed the other day and since then has had real issues booting up. In fact, the only way to start it was in safe mode. I have re-installed Snow Leopard twice and the restart issue keeps coming back... A seemingly related bug is that the mouse cursor has these weird row and columns of black bits attached to it - I also seem to have to reinstall my Wacom driver everytime the bug returns. I have checked for viruses and found nothing, repaired disk and nothing.. still same issues...
    Cursor looks like this...
    Anyone any ideas? RAM issue? Hardware failure???
    I have removed KVM and Wacom from the mac and it still has the issue.... reset PRAM no difference.... run out of ideas!!! anyone!????!!!??!?!?
    The original bug happened when using 10.6.8 now still persists in fresh install of 10.6 after many re-installs. I have not tried a restore from time machine backup yet or erased the disk as I was hoping not to have to loose all the stuff on the hard drive...
    Any ideas?

    As a novice if I were you I would just purchase Mountain Lion and run the installer. You're going to get in a bit over your head with making a bootable ML installer disk. Realize that you will need to erase your hard drive and without a back up your files are gone.

  • [SOLVED] SSD and boot problem

    I recently bought a new 30GB Corsair SSD, and it runs wonderfully. However, the device takes a considerably long time to initialize on boot (~30-45 seconds).
    Here's a snippet of the relevant dmesg output:
    [ 23.360042] ata5: lost interrupt (Status 0x58)
    [ 23.363366] ata5: drained 65536 bytes to clear DRQ
    [ 23.447633] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [ 23.447673] scsi 4:0:0:0: CDB: cdb[0]=0x12: 12 00 00 00 60 00
    [ 23.447683] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
    [ 23.447684] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
    [ 23.447754] ata5.00: status: { DRDY }
    [ 23.447810] ata5: soft resetting link
    [ 23.653843] ata5.00: configured for UDMA/33
    [ 23.654431] ata5: EH complete
    [ 23.654435] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
    [ 23.657130] scsi 4:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1312 1011 PQ: 0 ANSI: 5
    [ 54.373360] ata5: lost interrupt (Status 0x58)
    [ 54.376674] ata5: drained 65536 bytes to clear DRQ
    [ 54.465937] ata5.00: limiting speed to UDMA/25:PIO4
    [ 54.465941] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [ 54.465985] sr 4:0:0:0: CDB: cdb[0]=0x5a: 5a 00 2a 00 00 00 00 00 80 00
    [ 54.465996] ata5.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
    [ 54.465997] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
    [ 54.466085] ata5.00: status: { DRDY }
    [ 54.466144] ata5: soft resetting link
    I haven't encountered this problem with any other drive I've put in there, so I'm guessing it must be SSD-related. Has anyone else experienced something similar, and could you point me in the right direction? Thanks.
    Last edited by itsbrad212 (2012-04-01 00:05:28)

    itsbrad212 wrote:
    falconindy wrote:Consider RMA'ing the drive.
    Do you think it's defective/worth replacing? It's more of an annoyance than anything, and the drive has no other visible issues other than on initialization.
    Yes, I do. Healthy drives don't timeout on simple DMA initialization requests.

  • [Athlon64] Ram and USB problems!

    Hi to all, this is my first post so be kind and patient.
    My system:
    (Hardware) K8T Neo2-F (VIA K8T800pro & VT8237), Athlon64 3200+ 939, 2x 256mb Kingston KVR400X64C3AK2 (Nanya) ram sticks, Maxtor DM 120mb SATA drive connected to SATA1, Liteon DVD connected to IDE2, Liteon 350 power supply.
    (Software & Drivers) Win-XPpro SP2, VIA Hyperion 4in1v456v, VIA RAID OM74 v4.12, VIA USB2 V260-L.
    I’ve got 2 problems:
    Firstly, the board will not post unless I stick the 2 ram modules in DIMM 1 (Green) and DIMM 2 (Green) and ONLY reads 256mb while there is 512mb in there.
    It also operates in single channel mode and not duel channel mode.
    I checked the 2 ram stick with Cpu-z and it registered 512mb in single channel mode.
    I tried putting 1x256mb in DIMM 2 (Green) and 1x256mb in DIMM 4 (Purple) as the manual says but NO GO!
    I tried putting 1x256mb in DIMM 1 (Green) and 1x256mb in DIMM 3 (Purple) but also NO GO!
    Secondly, when ever I try to plug in any USB device it slows the computer to a disabling pass especially when starting up window.
    Can any one help please?
    Many thanks.

    Thanks Tiresmoke,
    I updated the Bios to v3.3 and every thing is much better now. The board reads 512mb; one 256mb in DIMM1 (Green) and another in DIMM3 (Purple), and in duel channel too.
    The only problem I have now, is that after XP loads there is about 20 secs of darkness and I have to move the mouse a little before I can enter in to XP's desktop, otherwise it restarts and goes into F8 (the safe mode screen)!!
    That will have to do right now untill I find a solution for the moving mouse thing!
    Thanks again.

  • HELP!  Control Panel missing and booting problems

    For some reason I cannot access the control panel where all the icons for networking, hardware and so and so on normally are to be found.
    It is not present as an icon on the dock and does not appear when in the "apple" menu I click the german translated name of it"Systemeinstellungen". Am I forced to install again the whole Leopard !!! or is it htere a way to get the panel back?
    I have also general problems. Often I am forced to start twice the Mac since it remains the first time in the booting process with the multicolour round wheel spinning endlessly.
    Thanks in advance ;-))

    Given your collection of problems reinstalling seems a good idea:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • P965 neo-f v2 install and boot problem

    hi. i have problem vith my motherboard( p965 neo-f v2) i cant instal win7. always rebooting when instal. 3 days im trying to make this work. any help?

    If it's rebooting randomly then it's most likely the RAM, data corruption or power supply issues.
    It's never a good idea to mix RAM modules by the way. Try with just ONE stick in DIMM1 (slot closest to the CPU). Also, still check there's no problems with the RAM module with >>Memtest86<<.
    Run diagnostic tests on the hard drive to check it's not the cause of the problem and try a different lead.
    Another possibility is that your power supply is faulty. Try and borrow one of greater power (more amps on the +12v rail) and see if that changes anything.

  • G4 MDD freezing and boot problems

    Recently bought an MDD dual 1.0 as an upgrade from a 400mhz sawtooth G4. It has seemed to work fine until today, but I haven't been doing much with it other than install software.
    Installed software:
    OSX 10.3.9(from combined update, not software update)
    Pro Tools TDM 6.4.1 cs4
    What's happening right now:
    When booting, the monitor remains black until the Blue background "Mac OSX" loading screen starts. There is no gray screen with the apple logo, ever. Sometimes this period of blackness is less than a minute, sometimes it can go for up to 5 minutes before I get video. I have never had this happen on any mac, it's definitely the most unusual symptom.
    The computer seems to completely freeze or become unusable within 5 minutes of light use.
    I just pulled all PCI cards, thinking maybe that was the problem, but no luck.
    A few other interesting points:
    The fans seem to be running more than usual, so I'm wondering if this might be heat related. This has the least desirable thick aluminum heatsink. But I don't want to throw a lot of money at this machine if I don't have to.
    When I got this computer 3 weeks ago it would not boot, but pushing the PMU reset button on the motherboard got it going right away. Just tried this again and it did not help.
    Message was edited by: MNMinstrel

    Solved the black background problem, I think. It went away when I plugged the speaker back in.
    Still having issues though.
    First, I ran techtool. When it gets to the last test, volume structure, it gets slow, then automatically reboots. I'm wondering if I might have a bad hard drive.
    Rebooting from the hard drive seemed to work okay initially, but as soon as CPU temp exceeds 58 degrees celsius the OS freezes. What is a normal temp for this computer, is it overheating?
    Message was edited by: MNMinstrel

  • Numlock and boot problems

    Ive been posting a lot about problems with booting my K7n2 delta.   One thing I noticed when my pc wont restart or wont boot from cold unless I first shut it off at the mains is that when I get the black screen (after my monitor goes to sleep) - I cannot change the numlock (which is on) - it wont respond to keystrokes (cant ctrl alt delete either).
    What is this telling me about the status my pc is in - has it not initialised the keyboard?? - can I draw any conclusions from this
    Yours - clutching at straws - Oz

    Hi Andovers,
    I dont wanna P anyone off by posting the same Q in several threads -  I just thought the numlock might indicate something different.
    Just to answer your points - my Qtec say on the 12v rail - 20A peak and 14A max, peak for 3 and 5 v rails is 285w.   I know they probably are bogus numbers - so I borrowed a 400W Jeantech (the most powerful PSU I could get at short notice) and tried that last night.   No difference - also I have tried my gforce 2 in my system and got the same probs so im leaning away from the ATI issue.
    I havent touched my bios - still the v5 that it came with.
    Also just tried messsing round with my memory without any luck.  I have some PCI 2100 that i could shove in - samsung and some  unknown brand that came with my PC -  but i thought my corsair 2700 would work.
    Thanks for the suggestions (they must be good cos i tried em all- LOL)

  • I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

    I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise?  During installation emptied cache, etc. Backed up using time machine, fortunately.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

Maybe you are looking for