RDS 2012 - Slow Perforamance, random disconnects - The RDP protocol component X.224 detected an error (0) in the protocol stream and the client was disconnected.
We have an RDS environment configured on server 2012 with approx. 20 users connecting for remote app utilization across 4 different locations that are connected via VPN. Server 2012 has great resources from the virtual host so system resource allocation
shouldn't be an issue. I'm thinking these errors are correlating with the performance problems. Any recommendations on how to effectively end these errors or to boost performance?
RDS Log File
Log Name: Microsoft-Windows-RemoteDesktopServices-RdpCoreTS/Operational
Source: Microsoft-Windows-RemoteDesktopServices-RdpCoreTS
Date: 3/3/2015 7:47:51 PM
Event ID: 97
Task Category: RemoteFX module
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: REMOTE1.mzltg.local
Description: The RDP protocol component X.224 detected an error (0) in the protocol stream and the client was disconnected.
System Log Error Log Name: System
Source: Schannel
Date: 3/4/2015 10:42:02 AM
Event ID: 36887
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: REMOTE1.mzltg.local
Description: A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 49.
Hi Shane,
Do you have any progress at the moment?
Regarding the TLS error code 49, it indicates a valid certificate was received, but when access control was applied, the sender did not proceed with negotiation.
More information for you:
SSL/TLS Alert Protocol & the Alert Codes
http://blogs.msdn.com/b/kaushal/archive/2012/10/06/ssl-tls-alert-protocol-amp-the-alert-codes.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
My iPhone with 40 or so percent randomly shuts down with iOS 7 and 6. Often with the camera app stating the phone is out of battery. Moments later I turn it back on and the same battery life still appears. It sometimes happens over and over until I leave it alone for a while (still not charging), and then it works.
I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place
-
I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
I have an iMac 5.1 which is running OSx10.5.8 - it runs very slowly and I can't find if there is a particular problem. In the process, I have tried to install 10.6 [I have a new iMac] and the 5.1 won't accept the install discs.
As you have discovered... you cannot use the install discs from another Mac...
Re the iMac running OS X 10 5 8... and for your New Mac...
See Here for keeping your Mac Happy...
http://support.apple.com/kb/HT1147
http://www.thexlab.com/faqs/maintainingmacosx.html
http://www.thexlab.com/faqs/performance.html -
is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
it would be very important to put the data from iphone 5 to my new 5s ..
looking forward to get some help
thxYou cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.
-
I'm trying to get rid of logmein. I threw away the entire application but I can't remove it from my overhead menu bar and the activity monitor tells me it's still running. How do I get rid of it completely?
Install it again and use the developers uninstall instructions
How to uninstall/install software on your Mac -
What version of iPhoto. iPhoto 11 9.4.3 (720.91)
What version of the Operating System. OSX 10.8.3
Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
LN
Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future -
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?
What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN -
I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!
can you describe exactly what is happening? And give exact error messages
LN -
Since I installed Mavericks I am having trouble streaming and the fan turns on and stays on shortly into watching a film on line.
Also the screen breaks up into lines and colors with no image in the middle of viewing a film sometimes several tomes.Hi Mudra,
Thanks for visiting Apple Support Communities.
If your fan is running and you're noticing video issues when streaming video, I'd suggest first trying to reset your system, as described in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
All the best,
Jeremy -
When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic. -
I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!
it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.
-
I am having issues get my email in one of my mail accounts so I tried to "DELETE" the whole account. But my phone will not delete a mail account. And the phone is getting really hot and battery was full 2 hours ago and now at 25%.
Well, you don't say what happens when you try to delete the account. So I don't know what else to recommend. However, if your phone is not charging, is that the mains charger or the computer USB? Also, if it not showing any change to battery percentage, then something is wrong with the software. The next step in user troubleshooting after the reset is a restore from backup. However, considering the condition of the phone right now, I would be more than willing to say your backup is going to be corrupt. But you can try. If that does not fix the device, then you restore as new, not from a backup. If the phone works, then you can try restoring the backup again, but if it messes up, you are going to have to restore as new again. If the restore as new does not work, then you need to make an appointment at the Genius Bar or Authorized Apple Service Provider to get the hardware checked.
-
Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point. I recently got a Bluetooth headphone and the antennae is on the right ear piece. For seamless connection am required to have my iPhone on my right arm if am using the headphone outdoors.
I was wondering this too. Did you ever get an answer? I just bought a non-nike pair of sneakers and have a pod pouch now on my laces. I have it tight, at the lower part of the laces so its flat. When its on the left side my time is very similar to what it was when I used the nike shoes. When it is on the right side, my time is about 35sec/mile higher. I wonder which is more accurate and if you are supposed to have them on the same side. If so, then that is as accurate as with my nike shoes. Hope we get an answer soon. Im about to return everything its so frustrating.
Maybe you are looking for
-
Hi, I have created a DMEE format for which, during a payment run, I require one particular node to execute continuously as the number of vendor , the payment has been made to. Basically I need a segment to be LOOPed. Is there option available through
-
Suddenly when I select multiple images in Bridge, then go to Tools>Photoshop>Batch, I get the message "The command "Batch" is currently unavailable." Batch is also greyed out in Automate. This occurs when no other processes are happening. What cou
-
How to Install Win7 on a 3TB hdd using GPT
Hi! I'd like to change the HDD of my Thinkcentre Edge 72 from the original 500GB to a 3TB HDD. Can please somebody tell me, how I can install the original Win7 Pro levnovo version (with the recovery DVDs) back on the new HDD (partitioned in GPT)? Man
-
Splitting Airport Connection with a PC
HI all, i was wondering if it is possible to share the original Airport connection on my AGP Sawtooth 500 with my ugly beige box sitting next to it...Any help is appreciated...thanks!
-
C200 M2 RAID Configuration check
Hi all How can I check if the RAID configuration in my C200 M2 server is correct, the server was purchased from Cisco and I understand that it should be preconfigured with the correct RAID for Call Manager but I want to double check and make sure bef