Re: 11gR2 installation on Windows 2008 R2

Does anyone tried install 11gR2 on Windows 2008R2? The installation failed during the "Grid Infrastructure Configuration". I have gone through lot of troubleshooting but seems not working.
In the installation manual, it said that we can use local administrator to install. But during the installation, it prompted a error warning with
"PRVF-9998" : User is not a domain user.
Cause: RAC Installation must be done by a domain user. Locally defined users have a different identity on each node.
Is that if my server is joined domain, I must use a domain user with local administrator group to install 11gR2 grid infrastructure?

Page 2
2011-05-09 10:52:39: Succeeded in writing the checkpoint:'ROOTCRS_OLR' with status:SUCCESS
2011-05-09 10:52:39: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OLR -state SUCCESS
2011-05-09 10:52:39: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OLR -state SUCCESS
2011-05-09 10:52:39: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:39: Succeeded in writing the checkpoint:'ROOTCRS_OLR' with status:SUCCESS
2011-05-09 10:52:39: ckpt: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_GPNPSETUP
2011-05-09 10:52:39: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_GPNPSETUP
2011-05-09 10:52:39: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_GPNPSETUP
2011-05-09 10:52:39: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:39: checkpoint ROOTCRS_GPNPSETUP does not exist
2011-05-09 10:52:39: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_GPNPSETUP -state START
2011-05-09 10:52:39: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_GPNPSETUP -state START
2011-05-09 10:52:39: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:39: Succeeded in writing the checkpoint:'ROOTCRS_GPNPSETUP' with status:START
2011-05-09 10:52:39: GPnP setup state: none
2011-05-09 10:52:39: Creating local GPnP setup for clustered node...
2011-05-09 10:52:39: Oracle CRS home = D:\app\11.2.0\grid
2011-05-09 10:52:39: Oracle GPnP wallets home = D:\app\11.2.0\grid\gpnp\host199\wallets
2011-05-09 10:52:39: Checking if GPnP setup exists
2011-05-09 10:52:39: D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cwallet.sso wallet must be created
2011-05-09 10:52:39: Removing old wallets/certificates, if any
2011-05-09 10:52:39: Creating GPnP Root Wallet...
2011-05-09 10:52:39: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -nologo
2011-05-09 10:52:39: Executing D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -nologo
2011-05-09 10:52:39: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -nologo
2011-05-09 10:52:40: Creating GPnP Root Certificate...
2011-05-09 10:52:40: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -self_signed -dn "CN=GPnP_root" -keysize 1024 -validity 9999 -nologo
2011-05-09 10:52:40: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -self_signed -dn "CN=GPnP_root" -keysize 1024 -validity 9999 -nologo
2011-05-09 10:52:40: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -self_signed -dn "CN=GPnP_root" -keysize 1024 -validity 9999 -nologo
2011-05-09 10:52:41: Exporting GPnP Root Certificate...
2011-05-09 10:52:41: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -dn "CN=GPnP_root" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:41: Executing D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -dn "CN=GPnP_root" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:41: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -dn "CN=GPnP_root" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:41: Creating GPnP Peer Wallet...
2011-05-09 10:52:41: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:41: Executing D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:41: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Creating GPnP Profile Reader Wallet...
2011-05-09 10:52:42: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Executing D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Creating GPnP PA Wallet...
2011-05-09 10:52:42: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Executing D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:42: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -auto_login -nologo
2011-05-09 10:52:43: Adding private key to GPnP Peer Wallet...
2011-05-09 10:52:43: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -keysize 1024 -nologo
2011-05-09 10:52:43: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -keysize 1024 -nologo
2011-05-09 10:52:43: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -keysize 1024 -nologo
2011-05-09 10:52:44: Adding private key to GPnP PA Wallet...
2011-05-09 10:52:44: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -keysize 1024 -nologo
2011-05-09 10:52:44: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -keysize 1024 -nologo
2011-05-09 10:52:44: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -keysize 1024 -nologo
2011-05-09 10:52:44: Creating certificate request for GPnP Peer Wallet...
2011-05-09 10:52:44: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -nologo
2011-05-09 10:52:44: Executing D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -nologo
2011-05-09 10:52:44: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -dn "CN=GPnP_peer" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -nologo
2011-05-09 10:52:45: Creating certificate request for GPnP PA Wallet...
2011-05-09 10:52:45: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -nologo
2011-05-09 10:52:45: Executing D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -nologo
2011-05-09 10:52:45: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet export -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -dn "CN=GPnP_pa" -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -nologo
2011-05-09 10:52:45: Creating certificate for GPnP Peer Wallet...
2011-05-09 10:52:45: D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:45: Executing D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:45: Executing cmd: D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:46: Creating certificate for GPnP PA Wallet...
2011-05-09 10:52:46: D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:46: Executing D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:46: Executing cmd: D:\app\11.2.0\grid\bin\orapki cert create -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\root" -pwd gpnp_wallet1 -request "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\certreq.txt" -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -validity 9999 -nologo
2011-05-09 10:52:46: Adding Root Certificate TP to GPnP Peer Wallet...
2011-05-09 10:52:46: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:46: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:46: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Adding Root Certificate TP to GPnP Profile Reader Wallet...
2011-05-09 10:52:47: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Adding Root Certificate TP to GPnP PA Wallet...
2011-05-09 10:52:47: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:47: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt" -nologo
2011-05-09 10:52:48: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2011-05-09 10:52:48: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:48: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:48: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:48: Adding peer Certificate as a TP into a GPnP PA Wallet...
2011-05-09 10:52:48: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:48: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:48: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:49: Adding PA Certificate as a TP into a GPnP Profile Reader Wallet...
2011-05-09 10:52:49: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:49: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:49: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:49: Adding peer Certificate as a TP into a GPnP Profile Reader Wallet...
2011-05-09 10:52:49: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:49: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:49: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\prdr" -pwd gpnp_wallet1 -trusted_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:50: Adding PA Certificate as a TP into a GPnP Peer Wallet...
2011-05-09 10:52:50: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:50: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:50: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt" -nologo
2011-05-09 10:52:51: Adding peer Certificate as a TP into a GPnP PA Wallet...
2011-05-09 10:52:51: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:51: Executing D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:51: Executing cmd: D:\app\11.2.0\grid\bin\orapki wallet add -wallet "D:\app\11.2.0\grid\gpnp\host199\wallets\pa" -pwd gpnp_wallet1 -user_cert -cert "D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt" -nologo
2011-05-09 10:52:51: resfiles are D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt D:\app\11.2.0\grid\gpnp\host199\wallets\root\ewallet.p12 D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cwallet.sso D:\app\11.2.0\grid\gpnp\host199\wallets\prdr\cwallet.sso D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cwallet.sso
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\root\b64certificate.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\root\ewallet.p12 /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\root\ewallet.p12 /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cert.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\peer\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\prdr\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\prdr\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cert.txt /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: Executing cmd: cmd /c cacls D:\app\11.2.0\grid\gpnp\host199\wallets\pa\cwallet.sso /E /G "Administrators":F "NT AUTHORITY\SYSTEM":F > NUL
2011-05-09 10:52:51: GPnP Wallets ownership/permissions successfully set.
2011-05-09 10:52:51: GPnP Wallets successfully created.
2011-05-09 10:52:51: <--- GPnP wallets successfully created
2011-05-09 10:52:51: Creating GPnP peer profile --->
2011-05-09 10:52:51: Oracle CRS home = D:\app\11.2.0\grid
2011-05-09 10:52:51: Oracle GPnP profiles home = D:\app\11.2.0\grid\gpnp\host199\profiles
2011-05-09 10:52:51: Oracle GPnP profiles parameters:
2011-05-09 10:52:51: paloc==
2011-05-09 10:52:51: cname=CLEISQA=
2011-05-09 10:52:51: cssdisco==
2011-05-09 10:52:51: cssld=400=
2011-05-09 10:52:51: asmdisco==
2011-05-09 10:52:51: asmspf==
2011-05-09 10:52:51: netlst="Application Connection (Teamed)"/10.36.12.0:public,"Heartbeat Connection (Teamed)"/10.36.10.0:cluster_interconnect=
2011-05-09 10:52:51: ocrid==
2011-05-09 10:52:51: clusterguid==
2011-05-09 10:52:51: Checking if GPnP setup exists
2011-05-09 10:52:51: D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml profile must be created
2011-05-09 10:52:51: OCRID is not available, hence not set in GPnP Profile
2011-05-09 10:52:51: ClusterGUID is not available, hence not set in GPnP Profile
2011-05-09 10:52:51: gpnptool: run D:\app\11.2.0\grid\bin\gpnptool create -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -prf -prf_sq=1 -prf_cn=CLEISQA -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.36.12.0" -net1:net_ada="Application Connection (Teamed)" -net1:net_use="public" -gen:net=net2 -net2:net_ip="10.36.10.0" -net2:net_ada="Heartbeat Connection (Teamed)" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2011-05-09 10:52:51: Running as user host1Admin: D:\app\11.2.0\grid\bin\gpnptool create -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -prf -prf_sq=1 -prf_cn=CLEISQA -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.36.12.0" -net1:net_ada="Application Connection (Teamed)" -net1:net_use="public" -gen:net=net2 -net2:net_ip="10.36.10.0" -net2:net_ada="Heartbeat Connection (Teamed)" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2011-05-09 10:52:51: s_run_as_user2: Running D:\app\11.2.0\grid\bin\gpnptool create -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -prf -prf_sq=1 -prf_cn=CLEISQA -prf_pa="" -hnet=gen -gen:hnet_nm="*" -gen:net=net1 -net1:net_ip="10.36.12.0" -net1:net_ada="Application Connection (Teamed)" -net1:net_use="public" -gen:net=net2 -net2:net_ip="10.36.10.0" -net2:net_ada="Heartbeat Connection (Teamed)" -net2:net_use="cluster_interconnect" -css=css -css:css_dis="" -css:css_ld=400 -asm=asm -asm:asm_dis="++no-value-at-profile-creation--never-updated-through-ASM++" -asm:asm_spf=""
2011-05-09 10:52:52: D:\app\11.2.0\grid\bin\gpnptool successfully executed
2011-05-09 10:52:52: gpnptool: rc=0
2011-05-09 10:52:52: gpnptool output:
Resulting profile written to "D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml".
Success.
2011-05-09 10:52:52: gpnptool: run D:\app\11.2.0\grid\bin\gpnptool sign -p="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -w="file:D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -rmws
2011-05-09 10:52:52: Running as user host1Admin: D:\app\11.2.0\grid\bin\gpnptool sign -p="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -w="file:D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -rmws
2011-05-09 10:52:52: s_run_as_user2: Running D:\app\11.2.0\grid\bin\gpnptool sign -p="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -o="D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml" -ovr -w="file:D:\app\11.2.0\grid\gpnp\host199\wallets\peer" -rmws
2011-05-09 10:52:52: D:\app\11.2.0\grid\bin\gpnptool successfully executed
2011-05-09 10:52:52: gpnptool: rc=0
2011-05-09 10:52:52: gpnptool output:
Resulting profile written to "D:\app\11.2.0\grid\gpnp\host199\profiles\peer\profile.xml".
Success.
2011-05-09 10:52:52: GPnP peer profile create successfully completed.
2011-05-09 10:52:52: <--- GPnP peer profile successfully created
2011-05-09 10:52:52: GPnP local setup successfully created
2011-05-09 10:52:52: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_GPNPSETUP -state SUCCESS
2011-05-09 10:52:52: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_GPNPSETUP -state SUCCESS
2011-05-09 10:52:52: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:52: Succeeded in writing the checkpoint:'ROOTCRS_GPNPSETUP' with status:SUCCESS
2011-05-09 10:52:52: CHM/OS is not supported on Windows
2011-05-09 10:52:52: Registering ohasd
2011-05-09 10:52:52: ckpt: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_OHASD
2011-05-09 10:52:52: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_OHASD
2011-05-09 10:52:52: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_OHASD
2011-05-09 10:52:53: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:53: checkpoint ROOTCRS_OHASD does not exist
2011-05-09 10:52:53: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OHASD -state START
2011-05-09 10:52:53: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OHASD -state START
2011-05-09 10:52:53: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:53: Succeeded in writing the checkpoint:'ROOTCRS_OHASD' with status:START
2011-05-09 10:52:53: Executing D:\app\11.2.0\grid\bin\ohasd install
2011-05-09 10:52:53: Executing cmd: D:\app\11.2.0\grid\bin\ohasd install
2011-05-09 10:52:53: Command output:
05/09/11 10:52:53 OracleOHService service installed
OhasdConfigureRegistry: started
OhasdConfigureRegistry: completed with 0
End Command output2011-05-09 10:52:53: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OHASD -state SUCCESS
2011-05-09 10:52:53: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -writeckpt -name ROOTCRS_OHASD -state SUCCESS
2011-05-09 10:52:53: D:\app\11.2.0\grid\bin\cluutil successfully executed
2011-05-09 10:52:53: Succeeded in writing the checkpoint:'ROOTCRS_OHASD' with status:SUCCESS
2011-05-09 10:52:53: 'ohasd' is now registered
2011-05-09 10:52:53: Starting ohasd
2011-05-09 10:52:53: Checking the status of ohasd
2011-05-09 10:52:53: Executing cmd: D:\app\11.2.0\grid\bin\crsctl check has
2011-05-09 10:52:54: Command output:
CRS-4639: Could not contact Oracle High Availability Services
End Command output2011-05-09 10:52:54: Checking the status of ohasd
2011-05-09 10:52:59: Executing cmd: D:\app\11.2.0\grid\bin\crsctl check has
2011-05-09 10:53:01: Command output:
CRS-4639: Could not contact Oracle High Availability Services
End Command output2011-05-09 10:53:01: Checking the status of ohasd
2011-05-09 10:53:06: Executing cmd: D:\app\11.2.0\grid\bin\crsctl check has
2011-05-09 10:53:07: Command output:
CRS-4639: Could not contact Oracle High Availability Services
End Command output2011-05-09 10:53:07: Checking the status of ohasd
2011-05-09 10:53:12: ohasd is not already running.. will start it now
2011-05-09 10:53:12: Executing D:\app\11.2.0\grid\bin\ohasd start
2011-05-09 10:53:12: Executing cmd: D:\app\11.2.0\grid\bin\ohasd start
2011-05-09 10:53:12: Command output:
05/09/11 10:53:12 OracleOHService service started
End Command output2011-05-09 10:53:12: ohasd is starting
2011-05-09 10:53:12: Started service 'ohasd'
2011-05-09 10:53:12: Checking the status of ohasd
2011-05-09 10:53:12: Executing cmd: D:\app\11.2.0\grid\bin\crsctl check has
2011-05-09 10:53:13: Command output:
CRS-4638: Oracle High Availability Services is online
End Command output2011-05-09 10:53:13: ohasd started successfully
2011-05-09 10:53:13: Creating CRS resources and dependencies
2011-05-09 10:53:13: Configuring HASD
2011-05-09 10:53:13: ckpt: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_INITRES
2011-05-09 10:53:13: Running as user host1Admin: D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_INITRES
2011-05-09 10:53:13: s_run_as_user2: Running D:\app\11.2.0\grid\bin\cluutil -ckpt -oraclebase D:\app\host1Admin -chkckpt -name ROOTCRS_INITRES
2011-05-09 10:53:13: D:\app\11.2.0\grid\bin\cluutil successfully executed
Edited by: user13000739 on 2011/5/9 上午 5:14

Similar Messages

  • Oracle ebs installation on windows 2008 R2

    Hi Hussein,
    I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
    The Prerequisites Software are:
    1.Chose and Operating System windows 2008 (32 bit):
    Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
    2.Install the Microsoft Visual C++ 2008 software.
    See the post for installation of – Microsoft Visual C++ 2008
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Regards,
    Raj

    hi Raj
    3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
    See the post for installation of – MKS Toolkit.
    I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
    Yes go for cygwin
    please see
    Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
    Oracle E-Business Suite R12 Installation Steps on Windows XP
    ;) AppsMAstI :)
    Sharing is Caring

  • Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

    Hi
    I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
    1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
    2. Oracle 11G Database
    3. RCU Installation
    4. WebLogic 10.3.5.0 Generic Version
    5. Weblogic patch
    6. OBIEE 11G 64 bit version (11.1.1.5). Software only
    7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
    Thanks

    Hi,
    Kindly refer my blog link:
    http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
    from exp..with obiee11g installation with win 7 64bit i have face so many issues..
    http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
    obiee11.1.1.5.0(Software Only Install) windows 7  64bit Installation Error
    OBIEE11g software only install configuration get hangover on win 2008 64
    ==========
    Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
    Hope it's clear...
    Thanks
    Deva
    Edited by: Devarasu on Nov 25, 2011 11:18 AM

  • Oracle 11g RAC installation on windows 2008 64 bit

    Hello Everyone,
    can i get some details regarding Oracle 11g RAC installation on windows 2008,
    minimum Hardware Requirement
    Will windows support ASM
    Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
    please send me some docs regarding os requirements, installation and ASM details.
    Thank you

    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.

  • EBS software or installer for windows 2008 R2 84 bit

    Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system

    Hi;
    The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
    Please see:
    Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
    Regard
    Helios

  • 10.2.0.4 database is possible on 11gr2 grid in Windows 2008 R2 server..?

    Hi all,
    can we installed 10.2.0.4 database on 11gr2 grid for windows server 2008 R2 server...?
    kindly suggest any possible cases.

    Hi Rajesh/all,
    I searched lot and get conclude ie. 10.2.0.5 and later versions will support for windows 2008 R2 server. but available only 10.2.0.4. while i try to install database will get error like version not supported.
    Here is my case...
    i) My two application will support 11gr1database and rest two application support only 10gr2 database version. all application depend by only Windows server.
    I installed 11gr2 grid in windows 2008 R2 server successfully.but it will not support the two applications.
    consider the above and suggest to install 10gr2 for windows 2008 R2 server.

  • Grid Infrastructure installation on Windows 2008 R2 problem

    Hello there,
    I tried to install Grid Infra 11gr2 on windows 2008 R2. I followed all the documentation, but i'm unable to install it. It always end with an error at the grid configuration step (OracleOHService ends unexpectedly, ohasd log says "caught exception"). I've got an SR opened, no answer for the moment ...
    Did someone a least managed to install grid infra on 2008 R2 ?
    It is certified, 2008 R2 is mentioned in the documentation, this is not my first RAC installation on windows (10g, 11gr1 on 2003, 2008 R1). But this time I'm totally stuck.
    PS : I love Linux.

    Make sure you have the shared storage configured correctly, on either Oracle ASM or OCFS for Windows. In my testing, i used a storage cabinet and iSCSI to connect to the disks.
    If you have attempted to install Grid once, then before attempting another installation, you must clean out the failed installation (http://download.oracle.com/docs/cd/E11882_01/install.112/e10817/rem_orcl.htm#CHDGBBIJ) and zero out the disks used by Oracle ASM. Also, use the asmtool to mark the disks so that Oracle ASM can identify them correctly.
    Also, make sure that Microsoft Clustering is disabled (and preferably not installed) on the servers you are using in your Oracle cluster.
    Most of the time, a failed installation is due to the shared storage not being configured correctly, or being configured so that it works during installation of Oracle Grid, but once the server is restarted, Oracle Grid fails to start.

  • MAPToolkit 9.1 Installation on Windows 2008 R2 Std SP1 64-bit fails

    Hi,
    I tried an installation of the MAPToolkit V9.1 on Windows 2008 R2 SP1 with an SQL Server 2012 MAPS instance installed, but it fails with:
    Applying execute package: MAPSetup_x64.msi, action: Install,
     path: C:\ProgramData\Package Cache\{D1E2ED68-9318-49A7-8B8A-7E8B5A2ADA29}v9.1.265.0\MAPSetup_x64.msi
     , arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7" INSTALLDIR="D:\Apps\Microsoft Assessment and Planning Toolkit"
     TRANSFORMS="" CEIPENABLED="0" LOCALDBDROP="0"'
    e000: Error 0x80070643: Failed to install MSI package.
    e000: Error 0x80070643: Failed to execute MSI package.
    e000: Error 0x80070643: Failed to configure per-machine MSI package.
    i319: Applied execute package: MAPSetup_x64.msi, result: 0x80070643, restart: None
    e000: Error 0x80070643: Failed to execute MSI package.
    i318: Skipped rollback of package: MAPSetup_x64.msi, action: Uninstall, already: Absent
    i319: Applied rollback package: MAPSetup_x64.msi, result: 0x0, restart: None
    Any idea?
    Thanks in advance!

    This log is coming from the installation log file Microsoft_Assessment_and_Planning_Toolkit_20140731105729.log
    There is a second log with the name Microsoft_Assessment_and_Planning_Toolkit_20140731105729_0_MAPSetup_x64.msi.log
    I see the following messages in this file:
    Action start 10:57:49: RegisterProduct.
    MSI (s) (B0:D0) [10:57:49:136]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
    MSI (s) (B0:D0) [10:57:49:136]: Doing action: PublishComponents
    MSI (s) (B0:D0) [10:57:49:136]: Note: 1: 2205 2:  3: ActionText
    Action ended 10:57:49: RegisterProduct. Return value 1.
    MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2205 2:  3: PublishComponent
    MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2228 2:  3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`,
    `Component`, `Feature`  WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2)  OR (`Feature`.`Action` = 4 AND `Feature`.`Installed`
    = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
    Action start 10:57:49: PublishComponents.
    MSI (s) (B0:D0) [10:57:49:137]: Doing action: _ConfigureDatabase
    MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2205 2:  3: ActionText
    Action ended 10:57:49: PublishComponents. Return value 0.
    MSI (s) (B0:7C) [10:57:49:139]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI3BF8.tmp, Entrypoint: ConfigureDatabase
    Action start 10:57:49: _ConfigureDatabase.
    CreateStartInstance: Failed to start instance.. Error Code: 0x89C5010A.
    ConfigureDatabase: CreateStartInstance failed. Error Code: 0x89C5010A.
    CustomAction _ConfigureDatabase returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (B0:D0) [10:57:49:278]: Machine policy value 'DisableRollback' is 0
    Action ended 10:57:49: _ConfigureDatabase. Return value 3.
    MSI (s) (B0:D0) [10:57:49:279]: No System Restore sequence number for this installation.
    MSI (s) (B0:D0) [10:57:49:279]: Unlocking Server
    Action ended 10:57:49: INSTALL. Return value 3.
    Property(S): DiskPrompt = Microsoft Assessment and Planning Toolkit Installation [1]
    Property(S): UpgradeCode = {39243C24-3EA1-473D-8240-3646837D0EC7}
    Property(S): PROCESSOR_ARCHITECTURE_VALUE = AMD64

  • OBIEE 11.1.1.6.0 installation on windows 2008 R2 64 bit failing

    I installed OBIEE 11.1.1.6.0 version on windows 2008 R2 64bit;installation has no issues all went well and sample app displayed fine.But, i see scheduler is not starting and also we deployed our code but reports failing with following oracle oci error
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: The specified module could not be found. [nQSError: 46029] Failed to load the DLL D:\OBI11G\Oracle_BI1\bifoundation\server\bin\nqsdbgatewayoci10g64.dll. Check if 'Oracle OCI 10G' database client is installed. (HY000)
    i also installed and verified by installing 11g client;PATH variable setting etc. no exact solution.i would like to see if any other also facing same issue with OBIEE 11.1.1.6 on windows 2008 R2 64 bit OS.
    Thanks

    Deva
    i didnt get what you mean by rpd client.,if you mean Admin tool, installation is OBIEE 'simple installation' type which includes Admin tool.
    coming to connectivity, no from physical layer you cannot view data as the packaged dll file (nqsdbgatewayoci10g64.dll ) is not registering in Windows 2008 64 bit,which i even tried manually.
    since above step is failing, i also installed a 11g db client(to divert oci connections) which is working fine for oracle connectivity and updated PATH environment variables but this issue is still in place.. as reports still pointing to Oracle_BI1/bifoundation/server/bin/ dll files
    please share your thoughts

  • SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

    Dear Sir.,
    Am installing sap ECC 6.0 on windows 2008 clustering with db2.
    I got one error in the phase of Configure the database for mscs. The error is  DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
    DB2_INSTANCE=DB2PRD
    DB2_LOGON_USERNAME=iil\db2prd
    DB2_LOGON_PASSWORD=XXXX
    CLUSTER_NAME=mscs
    GROUP_NAME=DB2 PRD Group
    DB2_NODE=0
    IP_NAME = DB2 IP PRD
    IP_ADDRESS=192.168.16.27
    IP_SUBNET=255.255.0.0
    IP_NETWORK=public
    NETNAME_NAME=DB2 NetName PRD
    NETNAME_VALUE=dbgrp
    NETNAME_DEPENDENCY=DB2 IP PRD
    DISK_NAME=Disk M::
    TARGET_DRVMAP_DISK=Disk M
    Best regards.,
    please help me since am already running late with this installation to run the db2mscs utility to Create resource.
    Best regards.,
    Manjunath G
    Edited by: Manjug77 on Oct 29, 2009 2:45 PM

    Hello Manjunath.
    This looks like a configuration problem.
    Please check if IP_NETWORK is set to the name of your network adapter and
    if your IP_ADDRESS and IP_SUBNET are set to the correct values.
    Note:
    - IP_ADDRESS is a new IP address that is not used by any machine in the network.
    - IP_NETWORK is optional
    If you still get the same error debug your db2mscs.exe-call:
    See the answer from  Adam Wilson:
    Can you run the following and check the output:
    db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
    I suspect you may see the following error in the debug.txt:
    Create_IP_Resource fnc_errcode 5045
    If you see the fnc_errcode 5045
    In that case, error 5045 which is a windows error, means
    ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
    couldn't find the "public network" as indicated by IP_NETWORK.
    Windows couldn't find the MSCS network called "public network". The
    IP_NETWORK parameter must be set to an MSCS Network., so running the
    Cluster Admin GUI and expanding the Cluster Configuration->Network to
    view all MSCS networks that were available and if "public network" was
    one of them.
    However, the parameter IP_NETWORK is optional and you could be commented
    out. In that case the first MSCS network detected by the system was used.
    Best regards,
    Hinnerk Gildhoff

  • Oracle 10g installation on Windows 2008 VMware

    Hi everybody,
    hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
    I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
    The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
    "unknown"
    "unknown"
    "unknown"
    Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
    kind regards
    Philipp

    The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
    Markus

  • BI publisher installation on Windows 2008 64bit sever

    Hello, everyone
    I need simple installation direction about BI Publisher version 11.1.1.3 onto Windows 2008 64 bit server with Oracle 11g database and Apex 4.0. More I read the installation, more I am confused. The document ID: E10539-01 is very confused to me. Sorry. The 32bit server with BI Publisher version 10.1.3.4.1 is much easier to set up.
    Thanks in advance.
    Tigerwapa

    Thank you Tony,
    Sorry about the name spelling. English is not easy. :-)
    The instruction for install and configure the PDF Printing is very similar between Apex3.0 and Apex 4.0. But, you do need to install BI publisher on one of the server and set up the port like 9704. What happen is we have a brand new 64 bit server with Windows 2008. The BI publisher previous version (was for 32 bit) will not install on 64bit server and having error message due to fail requirement.
    And BI Publisher 11g is a total different game. After read the installation doc., I am more confused.
    Right now, I was able to change the new server REPORT PRINTING to point to the other server (previously working). It is ok for now. I had posted to the BI forum and to see what responses I will get.
    Thank you very much.
    Tigerwapa

  • The acount information could not be verified - SQL 2005 SP3 installation on Windows 2008 R2 Failover Cluster

    Hi,
    We have a problem when we are trying to install SQL SP3 on SQL 2005 cluster.
    The problem is described bellow:
    We installed a new Windows 2008 R2 x64 failover cluster with two nodes.
    As a next step we installed SQL 2005 Enterprise edition x64 on this failover cluster. We have finished the installation without problems. After SQL installation we are trying to install SQL SP3 . We have logged on using a domain administrator account and
    we start the installation of SP3 with that user. In authentication mode screen the test gives a success status using either domain administrator-windows authentication or sa-sql authentication. On remote user account screen, when we give the domain
    administrator account we get the message "the account information could not be verified. Press ok to return to authentication mode screen to determine the reason for failure".
    We have tried to give the SQL services startup user on remote user account screen but the error is the same.
    the domain administrator account exists on security logins of SQL with sysadmin rights.
    Can someone help?
    Thanks. 

    Hi StelioMavro,
    According to your error message, when you install SQL Server 2005 SP3 in your failover cluster, we need to verify if there was other instance that had been removed and the installation did not pass the login check. I recommend you use windows authentication
    instead of SQL Server authentication when applying SP3. And the windows account used to run the SP3 setup program must have administrator privileges on the computer where SP3 will be installed.
    For more information about how to install SQL Server 2005 SP3 in failover cluster, you can review the following article.
    http://www.sqlcoffee.com/Tips0007.htm
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Assistance needed during Oracle 11G R2 client installations in Windows 2008

    Hi,
    I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
    Thanks in advance.

    Hi,
    are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?                                                                                                                                                                                                                                                               

  • Management Portal 8.5.2 Installation in Windows 2008

    Hi,
    I am experiencing a problem with Management Portal version 8.5.2. when I try to install this in windows 2008 R2 SP1 64 Bit server iam getting error stating that " Un supported Operating system and installer combination"
    Supported combinations are:
    32bit OS - 32 bit Vim.
    64bit OS - 64 bit Vim
    Currently running:
    64bit OS
    32bit process
    64bit Vim build
    .........aborting the install run
    Did any one face these kind of issues.....
    Thanks in advance....
    Karthik

    I experienced the same issue. This is how I resolved it.
    Check all pre-requisites .NET 3.5 Feature / Application Server Role with IIS / JRE 6u11 x64 / ASP .NET 2.0 AJAX Extension 1.0 / WSE 2.0 SP3 Runtime / SQL 2005 / SQL 2005 SP4 / SQL2005 SMO x64 - note X64 versions.
    Ensure that the software install is either from the CD or a mapped drive that presents the software like a CD i.e. Y:\autorun.bat
    Right click Y:\autorun.bat and select Run As Administrator - make sure it is the autorun.bat and not autorun.hta - windows helpfully hides the extension by default.
    Hope this helps someone else.
    Regards.

Maybe you are looking for

  • Can't open Office documents from network share

    Dear, I have a user named X that can't open Office documents from two specific shares. We call this shares T and U. When the user X opens Office documents the error message is "...xlsx can't be opened". The problem is not client specific because when

  • Import files from DR-HD100

    Is there a way to import clips (.mov) directly from my Hardisk drive DR-HD-100 in Final Cut X. I connect the drive but FCP X won't recognize it so it's useless and I have to import everything from tape via my camera (JVC GY-HD200) Thanks if you can h

  • Initial Opinion of iPhone as PDA

    Since the iPhone is really a full-fledged computer (it runs Mac OS X), it should shine as a PDA. But it doesn't. There is no global search ala Palm OS. Add-on PIM-like apps can't send pop-up alerts like SMS or Calendar can. That the Apple SDK doesn't

  • Reg exporting ALV to PDF in Webdynpro ABAP

    Hi All, I've developed one Webdynpro ABAP portal. There, in one view, I have an ALV for Account Statement. I need to allow this output - as it is -  to be Downloaded and Printed as per given Button-choice in PDF Format. How can I do this? I searched

  • Want to purchase an iMac for family computing.

    I have been a Microsoft Networking IT guy for over 15 years. Home PC finally died and want to upgrade to an iMac.  With another PC i would just add harddrive as another drive and copy off data including itune library.  How is this possible with an iM