Re: 13 in. MBP 2012 OS X Mavericks Maps (DIRECTIONS are not available)

Iam in Dubai UAE, i have 13 in MBP 2012 with OS X Mavericks.
I cannot get directions in using the app MAPS?
What do i need to do on my mac?
Is anybody experiencing the same error i get on getting directions using the MAPS in Mavericks?

my same problem (re-post quote)
need your response guys..iam using MBP 13 in 2012 2.5 Ghz 8Gb RAM INTEL HD4000 500Gb Hard Drive.
iam currently in DUBAI, UAE
Hi i would like to get an answer from these community,as iam having an error message like these below:
Although i have clearly specified a start and end location.
Directions are not available.
A route to the nearest road cannot be determined.
# I would like to have an answer from the above issue i have.

Similar Messages

Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
I didn't notified any errors while registering our counter objects or while running Perfmon.exe
Note: Same counter objects are available and working fine with Windows Server 2008 R2.
for diagnostic our counters on WIN2012, ran command as follows:
cd c:\windows\sysWOW64
lodctr /Q
I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
Appreciate quiclk response with solution or clues to diagnose it more details.
Thanks & Regards,
Sudhakar Rudra

Hi,
Thanks for your reply.
I hope you understood our problem.
same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
and
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
Do you see any issues of registry entries. ?
On what basis perfomance monitor list few enabled counters?
How can we add our counters manually to perfomance monitor?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Hi i have a macbook pro 13 inch mid 2012 i noticed that the speakers are not that loud unlike before

hi i have a macbook pro 13 inch mid 2012 i noticed that the speakers are not that loud unlike before,
now when i play music or videos, the sound is not the same unlike before, then my brother noticed it too because he has a macbook pro 13 inch late 2011 as well, im just wondering whats the problem? the speakers on my bro's laptop is still loud, mine is becoming not that loud much unlike before, tnx!

Check your settings in System Preferences>Sound. If that does not help, perform a PRAM reset.
http://support.apple.com/kb/ht1379
If that does not solve the issue, then a trip to an Apple store is in order.
Ciao.

I erased my drive on Macbook pro, trying to reinstale os x Maverick but it is not available on App store, what should I do?

I erased my drive on Macbook pro, trying to re-install os x Maverick but it is not available on App store, what should I do?

Install Yosemite instead of Mavericks. Or you can do the following if your computer supports Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

I erased my disk and tried to reinstall Mavericks but "installation information" not available?

I decided to erase the disk on Macbook Pro late 2011 model and do a clean reinstall of Mavericks. When I tried to restore the software I get an error message that says something like "installation information for this machine is not available - call AppleCare". Any suggestions? Thanks.

Hey LGStrazz,
If you are getting an alert to contact AppleCare, then start with the link below to get that started.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

RDS 2012 App-V 5 SP2, Applications are not pinned in the Metro Start Menu

Hey All,
I've been building a new App-V 5 Environment using server 2012 R2 for the App-V management\Publishing\Reporting servers.
I've installed app-v 5 SP2 on the RDS 2012 R2 servers and installed the App-V 5.1 SP1 Hotfix (KB2897087) for the 2012 R2 support.
I have run into the following issue; When triggering a app-v publishing sync the applications are only added in the classic start menu. The applications aren't pinned in the Metro Start menu like our App-V sp1 RDS 2012 clients.
I have checked the App-V client eventlogs (including the debug logs) and I haven't been able to find any errors that point out the cause of my issue.
Has anyone experienced the same issue or has anyone got any tips to get the app-v 5 sp2 client on RDS 2012 R2 to pin the sequences to the Metro Start Menu?
Thanks.

This is the default behaviour of Windows 8.1 and Windows Server 2012 R2 - there are no programmatic ways to pin shortcuts to the Start screen.
Here's a way to customise the Start screen layout: http://stealthpuppy.com/customizing-the-windows-8-1-start-screen-dont-follow-microsofts-guidance/
Here's how to go it with Group Policy: http://www.grouppolicy.biz/2013/06/customising-windows-8-1-start-screen-layout-with-group-policy/
Note that neither approach will help you pin shortcuts to the Start screen for users that have already logged on, without overwriting their existing preferences.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

After updating to Mavericks, my reminders are not working?

I have update my system OS to Mavericks and my old reminders are stopped working, why this happened?
how to resolve it? why my reminders stopped?

Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

After upgrade to mavericks usb devices are not recognised?

After upgrade from Mountain Lion 10.8.2 to Mavericks external USB speakers do not work and HP Inkjet USB printer is not recognised in control panel.
Pls advise on fault finding solutions
Best regards
Sergey

Back up all data.
In the iCloud preference pane, uncheck the box marked Calendars & Reminders if it's checked. You may get an alert that one or more calendars will be deleted from your computer. Confirm. The calendars won't be deleted from iCloud. Leave the preference pane open.
Quit Reminders if it's running, and also quit Calendar or iCal.
Triple-click the line below on this page to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
If you unchecked the box in the iCloud preference pane, check it again and close the preference pane.
Launch Reminders and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Sleep and hibernation is working on Server 2012 with started hypervisor! I do not know why...

Hi,
I enabled Hyper-V role in the Microsoft Windows Server 2012 on testing computer (PC with i7 CPU and 16GB RAM). I found very strange behavior. The sleep mode was enabled and after command “powercfg /hibernation on” the hibernation is also working.
I tested sleep (S3) and hibernation with started hypervisor and with running virtual machine. I tested sleep and hibernation triggered by power button and even with time-out that was set in the Power Options (I set sleep after 1 minute and
later hibernate after 1 minute and wait).
Sleep and hibernation is working! I do not understand why. Sleep and hibernation should be functional only on Client Hyper-V on Windows 8 and not on the Server 2012.
Some examples:
Testing workstation (i7, 16GB RAM) with Server 2012 and with started hypervisor:
C:\Users\Administrator>powercfg /a
The following sleep states are available on this system:
    Standby (S3)
    Hibernate
    Fast Startup
The following sleep states are not available on this system:
    Standby (S1)
        The system firmware does not support this standby state.
    Standby (S2)
        The system firmware does not support this standby state.
    Standby (Connected)
        The hypervisor does not support this standby state.
        The system firmware does not support this standby state.
    Hybrid Sleep
        The hypervisor does not support this standby state.
My laptop (i5, 8GB RAM) with Server 2012 and with started hypervisor:
>powercfg /a
The following sleep states are not available on this system:
    Standby (S1)
        The system firmware does not support this standby state.
        An internal system component has disabled this standby state.
                Hypervisor
    Standby (S2)
        The system firmware does not support this standby state.
        An internal system component has disabled this standby state.
                Hypervisor
    Standby (S3)
        An internal system component has disabled this standby state.
                Hypervisor
    Hibernate
        An internal system component has disabled hibernation.
                Hypervisor
    Standby (Connected)
        The hypervisor does not support this standby state.
        The system firmware does not support this standby state.
    Hybrid Sleep
        Standby (S3) is not available.
        Hibernation is not available.
        The hypervisor does not support this standby state.
    Fast Startup
        Hibernation is not available.
R. Revil
Relef Revil

Hi Ben,
I have nearly exactly the same Problem as Relef Revil.
I have Lenovo T510 Notebook with Core I7 and a Lenovo T420 Notebook with a CoreI5.
On my T510 S3 Sleep works perfectly with Hyper-V Role. On my T420 Sleep is disabled due to Hypervisor.
If I uninstall Hyper-V Role then Sleep works again as expected.
So, from a Little simple perspective, I Looks like this is a Hyper-V Thing or Problem.
I have als updated to the latest BIOS and latest Intel HD Graphics 3000 Drivers on this Win 2012R2 Maschine.
Also I have installed all possbile latest Versions of all other devices.
Could you probably give me an idea where to search for a solution.
So, what is the logic why Hyper-V disables sleep, when Sleep worked before?
I assumed that Hyper-V and Sleep ist generally possible on Win2012R2, especially when Sleep works perfectly when Hyper-V Role is not installed.
Kind Regards
Marcus
C:\Users\Marcus.Koenig>powercfg /a
The following sleep states are not available on this system:
Standby (S1)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S2)
The system firmware does not support this standby state.
An internal system component has disabled this standby state.
Hypervisor
Standby (S3)
An internal system component has disabled this standby state.
Hypervisor
Hibernate
An internal system component has disabled hibernation.
Hypervisor
Standby (Connected)
The hypervisor does not support this standby state.
The system firmware does not support this standby state.
Hybrid Sleep
Standby (S3) is not available.
Hibernation is not available.
The hypervisor does not support this standby state.
Fast Startup
Hibernation is not available.
C:\Users\Marcus.Koenig>

Software metering date not available for selection sccm 2012

Hi
I have installed SCCM 2012.
While viewing a report for software metering date and year are not available for selection. they are blank.

thaks
I is showing after restart.
Now there is another problem.
When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
Computers that have run a specific metered software program
NetBIOS Name
Installed Site Code
Last Usage
Total Usages
Average Usages per Day
Total Duration (min)
Average Duration of Use (min)
Average Duration per Day (min)
WIL-WNR-AV
PUN
11/16/2012 5:13:35 PM
1
0.03
7384.27
7384.27
246.14
How to know the the explanations for the underlined items ?

Using HP monitor with MBP 2012

I have MBP 2012 with the new Maverick OS installed. Trying to add external monitor. I bought HP IPS LED monitor and am using the Belkin mini display port to HDMI connector and an HDMI cord. Monitor cannot find a signal. I have rebooted my MBP

Hey can you try this ?
First connect your HP Monitor and go to system preferences > display > you get the option of Detectdisplay under that you have a Mirror Images select that and try if still does not work check with different monitor.
Regards
Kiran

How do I use my iMac(late 2009) as a monitor for my MBP(2012) or my MBP(late 2010) without software?

I currently have a late 2009 iMac, a 2012 MBP, a mid 2010 MBP and a MinDisplay Port (MDP) male to male cable. I am trying to either use the iMac a second monitor for one of the MBPs or mirror the display.
The iMac has a MDP port and is running OS X 10.7.5 (Lion)
The MBP 2010 has a MDP port and is running OS X 10.8.4 (Mountain Lion)
The MBP 2012 has a Thunderbolt port and is running OS X 10.9 (Maverics)
When I connect the 2010 MBP to the iMac with the MDP cable the screen of the iMac goes black and the MBP flashes blue. I have been looking for a solution and I have tried:
Rebooting them in the order of: connecting the cable, turing on the MBP, then turing on the iMac
Whilst they are on simply plugging the cable between the two
Connecting them with the cable while they are on, then pressing cmd-f1 on the MBP
Connecting them with the cable while they are on, then pressing cmd-f1 on the iMac
Pressing cmd-f2 on the iMac, whilst there are connected, only toggles a black screen on the iMac
Pressing cmd-f2 on the MBP doesn't do anything
Every time I connect the MBP 2012 to the iMac with the MDP cable, the MBP screen goes black and the computor screen becomes unresponsive but the screen stays on and I have to reboot the MBP.
I will really appreciate anyone who has any information on this topic.
Thanks

If the iMac is a 21-inch model, not without using a product such as ScreenRecycler over a network.
If the iMac is a 27-inch model, click here for information.
(127021)

Windows 7 booting time on MBP 2012

Hello Everyone,
I really hope that someone will be able to help out. I've tried looking for an answer but could not find anything quite similar to my problem...
Yesterday I've equipped my MBP 2012 with SSD with windows 7 installed; I've then used BootCamp 5.X to install all the drivers and that part runs perfect!
My concern is that every time I start up my Mac I can see a white screen that lasts for about 40 seconds, only then it jumps to windows boot logo.
My question is whether everyone with Windows 7 on their Macs experience the same wait time? Is there anything that can be done so that it starts booting windows right away?
Any help would be appreciated.
Thanks guys!

No answer for this problem?

Can I upgrade my hard drive of MBP 2012 without voiding the warranty

I am planning on purchasing a new MBP (2012) 13" with the miminum Hard drive capacity. I wanted to replace the HD with my own SSD. I am comfortable doing it myself, but will it void the Apple warranty?

As long as you don't break anything and the new part is not covered by warranty/AppleCare.
Read this for valuable tips and prevent problems.
Install/upgrade RAM or storage drive in Mac's
In fact I just upgrade the RAM today to 16GB and only took about 5 minutes.
Also your going to need to know how to reinstall 10.8 onto the drive.
Hold command option r while Ethernet cable connected to a router or modem (power reset)
also how to reinstall your free iLife
https://support.apple.com/kb/HT4718
another method if you have used the hard drive already and it's setup, to use Carbon Copy Cloner
Most commonly used backup methods

Re: 13 in. MBP 2012 OS X Mavericks Maps (DIRECTIONS are not available)

Similar Messages

Maybe you are looking for