Re:Assignment operation failes error

when i execute an Assignment individually depending on some criteria it is working for one record.............
But when i try to do the same for multiple records at a time it is throwing the above mentioned error.
Can anyone clear me this.........cant Assignment run on multiple records at a time.

Hi Shifali,
You want to check, if for a given main table rec,a particular rec has account group field value as XXX then it should be replaced by Static.
Is this is the case then instead of validating the record,validate the rec field only.
If(Account group.Code=XXX,STATIC,Account group.Code)
Hope It Helped
Thanks & Regards
Simona Pinto

Similar Messages

Assignment Operation failed....

Hi All,
I have an assignment expression created with the field "Name" which if is null ie no value at all,then should load a default value from the lookup table
I have the assignment defined as follows
If(Is_Null(Name),Name[3])
where Name[3] is a value from a lookup table.
When i execute the above assignment it fails as "Assignment Operation failed. I tried with "If then else " statement as follows and it too fails when i execute the assignment
If(Is_Null(Name),Name[3],Name)
where Name[3] is a value from a lookup table.
Any Help greatly appreciated
Thanks,
Aravind

Hi,
Check this out
IF(IS_NULL(Name),Account Group [ABC])
Above Assignment will be valid only if this Assignment is on look field Account Group and Name is the text field.
For getting value from the lookup table position the cursor accordingly in the expression and select the Lookup table from the Lookups.Once you will select the lookup table you will get the list of values present in that table.There you can select the value you want to populate.
Regards,
Jitesh Talreja

IAC operation failed error mac

I've been dealing with the accursed IAC operation failed error when saving edited photos - and apparently this is a common problem on Macs. I'm wondering if anyone has taken the free update to Yosemite yet and if so does the error continue with that OS? (I currently have PSE 11 & Mavericks.)

Had Elements 12.0. Upgraded to Yosemite. Had IAC operation failed error repeatedly. Tried upgrading to Elements 12.1 at Adobe recommendation. Upgrade failed repeatedly. Bought Elements 13.0. IAC operation failed error still here.
1. frustrated this error remains
2. peeved Adobe is never around when I need them, and they cast me to the "community". Help from the community is remarkably good, but I just gave Adobe $80 and their product doesn't work right - they owe me support, and now.

"Package operation failed" error when trying to create ICAP file

Why is this happening? I create a new assignment and then select "Package for Incopy" and I get the error message "Package operation failed". What am I doing wrong? For draft 1 of my Mac Indesign CS5 file I created a new "assignment 1" and ICAP file and emailed to my PC Incopy CS4 client. They sent IDAP file back and all was well. I need to send draft 2 to client the same way but why am I unable to create a new ICAP file? I can't even replace the ICAP file from draft 1. Please help. Thank you! Lynn

Did you ever get it to work?
We are having the same problem.
Indesign CS4 on Mac
InCopy CS5 on PC
Though we also get an odd message when we reopen the InCopy doc, that there is another version created in 1999 which we might want to use.

6750 Mural "Operation Failed" error opening large ...

Some friends of mine insist in sending multimedia messages with large picture attachments (in the 500kb range) to me. When these messages get to my phone, I can't open them. I select the message in the inbox and get a popup message saying "Operation failed". This happens even after power cycles and phone resets. The smaller the attachment, the better my chances of opening the message. Under 200kb - never a problem. Over 200kb - increasing chance of "Operation failed".
My workaround is to forward the message to my email address, which is not very convenient (sending the message is sloooooooowwwwwww, and then it takes forever to get to the destination ... I'm looking at you, AT&T!)
Anybody else see this problem? And is there a better workaround?
fyi This is with a recent firmware rev (within the past week)

I believe the limit is 600K in size for your network,however some devices have a hardware limit of 300K. When messages are over the size limit they are just rejected
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Outlook 2010: Getting a "the operation failed" error when accepting invite from inbox

One of the people I support is using Win 7 and Office 2010. When accepting an invite in his inbox, he gets "This Operation Failed", however this behaviour only occurs for internal staff who email him through Exchange. I emailed him from an external email
address and he was able to accept the invite and have it appear in his calendar correctly.
We are running Exchange 2007 and his client is Office 2010.
I'm going to try the following to try to get to the bottom of things
1. Check account settings
2. Disable antivirus
3. Try non cached mode
4. Check Delegate access?
5. Check event logs
6. Office updates / service packs
7. Repair job of Office 2010
8. Reinstall Office 2010 or install 2007
Does anyone have any other suggestions?

Glad your issue has been resolved.
Thanks for your sharing.
Evan Liu
TechNet Subscriber Supportin forum
If you have any feedback on our support, please [email protected]
Evan Liu
TechNet Community Support

IAC Operation Failed error

I have seen a few complaints about this problem but no solutions anywhere. Has Adobe ever weighed in on the topic? Does anyone know what's going on? I have at least 3 photos that seem to be forever stuck in edit mode as a result of the problem. It has happened with versions 10, 11 and 12 now.

Just tried to replicate this - it's a bit erratic. I've found that editing a bunch of things at once, then saving and closing them all by clicking on the x in the corner (in Expert mode, in Editor), and accepting all the defaults (name, resolution, one other) by quickly hitting return as the dialogs are presented, is most likely to trigger this problem. In this trial session, in which I closed 5 edited photos rapidly, Organizer appeared to be in the problem state, with the locked band present after the photos were closed in Editor, the edits not shown, and the wait cursor (spinning ball on Mac) lasting a long time. But, in this trial, the condition eventually resolved, the edits were saved, the photos released and no IAC error posted. In this trial, and as well as I can recollect from cases where the IAC error was thrown, no - the photos were not remaining open in Editor when the error was thrown. It appears that there's something of a race condition in communication between the two apps (Organizer, Editor).
So, I did not replicate the problem this time. And I've changed my behavior to 1) finish saving changes before attempting to close, 2) edit smaller batches (I'd been editing up to ~20), and I've seen the error a good deal less - but it is not entirely gone. If I catch a good example, I'll post again. But, this is what I can see so far.

ORAMED-01002:[Metadata error in assign operation]

Im using the Oracle Mediator component to assign an expression to a property. The assign expression uses the dvm:lookupValue() function to assign the outcome of the function to the property. When I invoke a message from e.g. SoapUI or the em testfeature it all works perfect. But when I use a testsuite with an initiate message that is similar to the request from SoapUI, the message fails with the following error:
Non Recoverable System Fault:
ORAMED-01002:[Metadata error in assign operation]Metadata Error occurred while assigning to target "$out.property.jca.db.XADataSourceName" using invalid expression "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")".Possible Fix:Fix the expression. Cause:internal xpath error
Invoke via SoapUI results in the following instance message fragment:
<message>
Assigned "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")" to "$out.property.jca.db.XADataSourceName"
</message>
Any suggestions.
Regards,
Melvin

Hi Clemens,
We've reported a service request on metalink regarding this issue. See : 3-1154677691
I've summarized the messages for you:
A SoapUI message that works:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:adr="http://www.xyz.nl/Services/AdresService"
xmlns:geb="http://www.xyz.nl/Contracten/Gebruiker"
xmlns:elem="http://www.xyz.nl/Contracten/Common/Elementen" xmlns:obj="http://www.xyz.nl/Contracten/Aanbod/Object">
<soapenv:Header/>
<soapenv:Body>
<adr:GetObjectAdresRequest>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>nl-NL</elem:Locale>
<elem:Kanaal>1</elem:Kanaal>
</geb:Autorisatie>
<obj:ObjectKey>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>xxx</elem:Locale>
<elem:Kanaal>x</elem:Kanaal>
</geb:Autorisatie>
<elem:RegioCode>xxx</elem:RegioCode>
<elem:Type>0</elem:Type>
<elem:Reference>xxx</elem:Reference>
</obj:ObjectKey>
</adr:GetObjectAdresRequest>
</soapenv:Body>
</soapenv:Envelope>
The testsuite initiate message which fails :
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService">
<Autorisatie xmlns="http://www.xyz.nl/Contracten/Gebruiker">
<Gebruikersnaam xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Gebruikersnaam>
<Locale xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Locale>
<Kanaal xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Kanaal>
</Autorisatie>
<ObjectKey xmlns="http://www.xyz.nl/Contracten/Aanbod/Object">
<RegioCode xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</RegioCode>
<Type xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Type>
<Reference xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</Reference>
</ObjectKey>
</GetObjectAdresRequest>
The composite Test.xml file
<?xml version="1.0" encoding="UTF-8" ?>

<compositeTest compositeDN="Adres" xmlns="http://xmlns.oracle.com/sca/2006/test">
<about/>
<initiate serviceName="AdresService_ep" operation="GetObjectAdres" isAsync="false" delay="PT0S">
<message>
<part partName="request">
<content>
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService" xmlns:ns2="http://www.xyz.nl/Contracten/Gebruiker" xmlns:ns3="http://www.xyz.nl/Contracten/Aanbod/Object">
<ns2:Autorisatie xmlns:ns4="http://www.xyz.nl/Contracten/Common/Elementen">
<ns4:Gebruikersnaam>xxx</ns4:Gebruikersnaam>
<ns4:Locale>xxx</ns4:Locale>
<ns4:Kanaal>x</ns4:Kanaal>
</ns2:Autorisatie>
<ns3:ObjectKey xmlns:ns5="http://www.xyz.nl/Contracten/Common/Elementen">
<ns5:RegioCode>xxx</ns5:RegioCode>
<ns5:Type>x</ns5:Type>
<ns5:Reference>xxx</ns5:Reference>
</ns3:ObjectKey>
</GetObjectAdresRequest>
</content>
</part>
</message>
</initiate>
</compositeTest>
Regards,
Melvin

HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 ===

Edit locally giving error "Operation Failed"

while edit document locally in KM trough the command "edit locally". After clicking on "edit locally"a digitalized signed applet pops up with run and cancel button.(here applet is being set instead of Active x).I clicked cancelled. It shows the error "operation failed".Doesn't allow me even next time. Showing
How to solve the problems that even though I click the cancel, the next time same applet should popped up

Hello,
i me having the same Issue when i try to edit KM File locally (Excel) -> Operation Failed Error.
please advice how did u solved the Issue?
Thanks and Regards,
Nazih

Why do I get Operation Failed. [Error Code: -17500]?

After test Stand has finished a test run and has generated a HTML file. I get the following Error Operation Failed [Error Code -17500]. The report is generated but not displayed in TestStand.

Hi,
Is this in the Operator Interface or the Sequence Editor, and what version of TestStand are you using.
Regards
Ray Farmer
Regards
Ray Farmer

CSA 6.0 event log error - Operation Failed

CSA 6.0.0.209, Windows 2003 server
When viewing Event Log or any Group events, receive Operation Failed error. CSAMCLOG shows MS SQL timeout errors during these operations. However, I am able to view Host events and general events using Event Monitor.
--Russell Manaois

You are possibly encountering bug CSCtg78612. This occurs when the CSA MC is updated from an earlier version of 6.0 to 6.0.2 and managed agents have not yet been upgraded. You should be able to address the issue by scheduling agent upgrades for the affected hosts.
You can view the full bug details here:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612
Scott

Editing Contacts via keypad causes OPERATION FAILE...

Initially I entered info for approximately 60 contacts into my new Nokia 6131 phone memory using the phone keypad. Everything worked fine. Then I discovered the CONTACTS application in Nokia PC Suite software was a lot easier to use for data input, so I started to use that application via my PC to edit my contacts.
Now, when I try to edit a contact using the phone keypad, I regularly get the OPERATION FAILED error, which prevents saving the revised contact information. This is EXTREMELY frustrating, because there is no indication of a cause for the error. 95 percent of the memory in my phone is free, so problem is not related to memory capacity. I can delete certain parts of contact info, like an extra phone number, or an image, and that seems to work without generating the error, but you cannot add or modify anything. I can only reliably edit my contacts using PC suite and then synchronizing the changes. I have updated PC suite and the phone firmware to the latest available versions, but that didn't help. DOES anyone know what causes this OPERATION FAILED error?

Thank you miksu,
Yes, my phone UI is idle when I try to browse/edit contacts. Today, I thought I'd try resetting factory settings and see if that cleared the problem. So I backed up the phone, reset factory settings and tried to restore from the backup - disaster, it would not restore contacts at all and I was left with a phone minus 400+ contacts! I tried backups that I had previously restored successfully from - still no go.
So I rebuild the contacts from my Outlook, compared it manually with what I had on my old 6230 (fortunately I still have the phone with contacts intact), made updates manually and all is now OK. The OPERATION FAILED does not appear on the phone and I can browse/edit my contacts on the PC.
Although everything is fine now, I will use PC Suite with caution. Perhaps my understanding of the product is not good enough, but I am not keen on risking it.
Sharad

PC Suite installs ok, but "operation failed" on si...

PC Suite installed fine, no error messages. Previously, I had no troubles.
A day or two ago, the version of Nokia Software Updater was itself updated, to 1.4.98EN
Now, whenever I attempt to install a sis or sisx file, from Windows, I get an "operation failed" error, from Nokia Application Installer. This happens whether or not I have PC Suite configured to install apps to either the phone or to its memory card.
Also, When I connect my phone to my PC, I can no longer browse either the phone's memory card, from Windows. Windows Explorer can detect the presence of the memory card but, when I select the memory card, Nokia Phone Browser gives me the error "The operation could not be completed".
However, Nokia Phone Browser can access the phone's memory, just fine.
Has anyone else encoutered this, particularly after Nokia's updater was updated? Is there a solution?
Windows Vistax64 Ultimate edition SP2 v.113
PC Suite version 7.1.18.0
Cable connection
Nokia Software Updater ver 1.4.98EN

Good catch, cricfancy. I missed the PC Connectivity solution. This time, I sorted the installed applications by Publisher and found all that were from Nokia, including the PC Connectivity Solution.
I uninstalled all of these:
Nokia Software Updater
Nokia Photos
Nokia PC Suite
Nokia Flashing Cable Driver
Nokia Connectivity Cable Driver
PC Connectivity solution
Rebooted PC
Ran CCleaner Registry Cleaner
Rebooted PC
Reinstalled Nokia PC Suite 7.1.18.0
Nokia PC Suite requested direct cable connection to the E71 phone
During the Nokia PC Suite installation, Windows Media Player spiked an error (I didn't realize any portion of WMP was even running). That's been happing a lot, recently.
Windows installed the connectivity drivers and Nokia PC Suite indicates the phone is connected.
PC requested a reboot.
All the USB drivers Windows was unable to install, the last time around, are now installed correctly.
And the result is:
I still cannot browse the phone's memory card, from Vista. Phone's memory is visible to the PC, just fine. Interestingly, the Settings for Nokia PC Suite (destinations for music, video, installs, etc.) defaulted to folders on the phone's memory card. When I drag and drop media, on to Nokia PC Suite's Windows desktop app, the files transfer just fine to the phone's memory card. But, this does not work for text or MS Office files (Excel, Word, etc.). Those spike a "unable to copy the file on the phone" message, from Nokia PC Suite.
It appears, for the time being, that my only alternative is the use Mass Storage as a way to access the phone's memory card, from Windows Explorer, in order to transfer data files that aren't media.
And, "operation failed" is still what comes up, from Windows, when I attempt to install .sis files with a double-click in WIndows Explorer.The workaround, though, is to drag-and-drop the .sis file, from Windows Explorer, on to the Nokia PC Suite desktop app.I can live with that.
I'm going to consider this problem to be more-or-less closed. I mean, I understand the workarounds needed.

EWS, Office 365, An internal server error occurred. The operation failed.

I am using EWS 2.0 to access a users calendar in Office 365. I use AutoDiscover to find the ExchagneService, then bind to the calendar via CalendarFolder.Bind and at the next statement folder.FindAppointments I get the error
An internal server error occurred. The operation failed.
I know that the credentials used to access the user are correct - have tested in the webmail and it works just fine.
If I use my own credentials (after having assigned rights to the user in question) my program does not fail. Only apparent difference is the administrator role.
Below I have listed the central parts of the code:
First the AutoDiscover (which work)
service = new ExchangeService(ExchangeVersion.Exchange2010_SP1,TimeZoneInfo.Local ); // service is a global variable
service.Credentials = new NetworkCredential(ConfigClass.CalendarReaderName, ConfigClass.CalendarReaderPassword);
service.AutodiscoverUrl(cal, RedirectionUrlValidationCallback);
Then the part where I want to get the appointments
CalendarView view = new CalendarView(_firstdate, _lastdate);
Mailbox mailbox = new Mailbox(cal); // cal is the e-mail address of the user
FolderId id = new FolderId(WellKnownFolderName.Calendar, mailbox);
CalendarFolder folder = CalendarFolder.Bind(service, id);
FindItemsResults<Appointment> findResults = folder.FindAppointments(view); // This is where the error occurs
Anybody know what this error actually means and how to solve the situation. I want to run the program using a service account rather than my personal credentials.

the error came back - but the trace revealed the error:
        <m:ResponseMessages>
          <m:FindItemResponseMessage ResponseClass="Error">
            <m:MessageText>An internal server error occurred. The operation failed.</m:MessageText>
            <m:ResponseCode>ErrorInternalServerError</m:ResponseCode>
            <m:DescriptiveLinkKey>0</m:DescriptiveLinkKey>
            <m:MessageXml>
              <t:Value Name="InnerErrorMessageText">Too many concurrent connections opened.</t:Value>
              <t:Value Name="InnerErrorResponseCode">ErrorTooManyObjectsOpened</t:Value>
              <t:Value Name="InnerErrorDescriptiveLinkKey">0</t:Value>
            </m:MessageXml>
          </m:FindItemResponseMessage>
        </m:ResponseMessages>
      </m:FindItemResponse>
    </s:Body>
</s:Envelope>
</Trace>
The account is used for other purposes as well - looking into other calendars. And I have seen this limitation before and read that it is a timing issue.
I guess I need to use another account ...

Re:Assignment operation failes error

Similar Messages

Maybe you are looking for