Re: Can't use Canon DR3060C

I would swear I saw a SCSI2 to USB adapter at Fry's. What the heck, let me check online and get back to you.
EDIT: TigerDirect and Newegg have them oniine.

So do you need the SCSI2 cable, just the SCSI2 to USB adapter, or both to make your setup work?

Similar Messages

Can't use Canon DR3060C

Have a Canon DR3060C I can't use because I no longer have an IDE slot for SCSI 2. I can't find a non ide SCSI2 Card. I can't find any kind of adapter (USB, Firewire) to scsi2. Do I have a $4000 paper weight?

So do you need the SCSI2 cable, just the SCSI2 to USB adapter, or both to make your setup work?

Can't use Canon iR C4580i to print after upgrading to Mavericks

Can anyone help to solve the problem?
I have tried to download the driver version 10.2.0 but still cannot use canon iR C4580i to print.
Thanks

Hey WKWF,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides relevant troubleshooting information for your issue:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Can I use canon eos40d for stop motion capture in premiere elements 9?

I Want too do stop motion capture but when I click get media, the pop up dialog box proceeda as if to import still photos. How do I get the "capture panel" that is talked about where I can select stop motion? Is premiere elements 9 supposed to work with a still camera like mine for stop motion at all? Thanks!!' Kimberley

Kimberley
Thanks for the reply. This is my take on the situation that you describe.
You wrote
The camera was linked to PC with USB cable and then the software showed on the PC what would normally be in the camera viewfinder. The enter key on the PC worked as a shutter release and onion skinning worked. Can premiere elements do this?
That more or less describes the Premiere Elements Webcam experience if Premiere Elements recognized the Webcam.
If you have made a USB connection between the Canon 40D and the computer and you are not getting a Capture Window when you use Premiere Elements' Add Media Webcam or WDM compatible device, then Premiere Elements does not support that simple route. It is my understanding that WDM compatible device represents Windows Driver Model (a framework for device drivers).
I have done some Google searching, and I have found instance where claims have been made for the Canon 40D as a webcam. I post one of these links for informational and non promotional purposes.
http://extrawebcam.com/
Have you explore any utilities that came with the Canon that might supply drivers for the Canon as a webcam?
Have you tried to use the Canon 40D as a webcam with Windows Movie Maker?
Please review and consider. (Also, 9.0.1 Update can be downloaded and installed from the project's Help Menu/Update or obtained online from
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
We will be watching for further developments.
Thank you.
ATR

Can't use Canon scanner.

Hi, All.
I've tried installing a CanoScan Lide 200 scanner to be used with Photoshop CS6 but can't seem to make it work. I downloaded the two latest drivers available on Canon's website and installed them but it hasn't worked.
Do any of you know if there are special steps that need to be taken to make this scanner work with Photoshop CS6 ?
Thank you in advance.

Are you running Photoshop CS6 32 bit, specifically? What OS are you running?
As far as I know scanning into Photoshop directly via TWAIN is possible only in the 32 bit version, and only then when the Adobe optional Twain_32.8ba plug-in has been loaded.
There may have been some more recent additions where something like WIA might provide scanning support; I'm not sure. It's been a while since I've had a scanner; nowadays I just photograph things I want scans of with my dSLR.
-Noel

Can I use Canon DPP as the external editor in Aperture 3 so I can use the lens distortion correction?

I'd like to use Aperture as my standard RAW converter and export to DPP if necessary. Has anyone tried it?

No, I don't believe so. DPP is a RAW converter, like Aperture, and you usually can't mix and match those.

I can't use my iPad2 with CANON EOS 350D

I can't use my iPad2 with CANON EOS 350D

Hi! You seem to be good at this. today I purchased the Camera Connection Kit but it doesn't work with my old Canon EOS 350d. I've switched to 'PTP' but it doesn't work. When I go in to "pictures" and "Camera" I can't see any pictures. Do you have any idea why? Can it have somehing to do with that I don't have the newest IOS 5? ( I have iPad 2nd gen). Don't know if you need to know anything more, but I would really appreciate if you could try to help me!

Can i use my new I pad with the Canon MX870 printer?

Can I use a I PAD 2 with me Canon MX870 Printer?

The Canon MX870 is not on Apple's AirPrint list of supported printers:
AirPrint basics
So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

Can I use a Canon Power Shot SX210-IS with Windows 8?

Can I use a Canon Power Shot SX210-IS with Windows 8? Is the software compatible or is there an update?
Solved!
Go to Solution.

Hello mtjs13,
You would be able to use your PowerShot SX210 IS camera with Windows 8. We have a directory of software on our web site which includes a set of updates for Windows 8. You can access them through this web link.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can i use a canon like 30 scanner with yosemite ?

can i use a canon lide 30 scanner with yosemite ? i cannot load any drivers

MissBea,
You can probably use your Canon printer with your HP notebook.
When connecting an HP printer to the computer, the printer works best when the printer software for that printer is downloaded and installed on the computer.
I would suggest that you need to do the same for the cannon printer, that is, you should download and install the driver (software) onto the computer. After you install the driver, and connect the printer using whatever means you have (wireless, USB, Ethernet), you should be able to control the printer from the computer.
Instead of installing HP printer software, you will need to install the printer software for your cannon printer.
Canon USA - Support and Drivers
1 Select your Product type > 2 Consumer and Home Office > 3 Product Series >
Scroll down and find your printer ...
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

I have macbook pro w existing iPhoto library. Now have Canon printer and loaded Canon software for same. Cannot access iPhoto library from Canon software, but prints fine from iPhoto. How can I use iPhoto library w Canon software?

I have a macbook pro w exisitng iPhoto library. I now have Canon printer and loaded Canon software for same. I cannot access iPhoto library for use from Canon software. I can print from iPhoto directly to new printer without problem. How can I use iPhoto library with Canon software? I would like to try the software to see which I prefer...

Simply export some photos from iPhoto to a folder on the desktop and experiment.
Without telling us even what this program is, not to mind what it does, that's the best anyone can suggest.
Regards
TD

Can't find photos using Canon Easy-Photoprint EX

I bought a canon printer with my laptop and when using Canon Easy-PhotoPrint EX I can't find my pictures from iPhoto in the menu. I can put a photo on my desktop and find and print it but am having trouble locating my photos already uploaded into iPhoto. Any suggestions?

Tom
Welcome to the Apple Discussions.
If the application does not interface with iPhoto then you're options are as follows:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Can i use my canon fixus 65 as a webcam?

can i use my canon fixus 65 as a webcam?

zadnor1 wrote:
I am trying to set up a webcam using the built-in camera on my MacBook Pro. However, when I set up a webcam site, I get no video from the computer. I have noticed that when I open iChat it says there is no camera hooked up.
http://support.apple.com/kb/HT2090
However, in the past I have been able to video chat with a friend. Can I use the built-in for a video webcam?
Yes.
If so, how?
Software runs iSight. Use webcam applications for webcam functions - other apps for other functions. Check each app of interest for functions offered and system requirements. To use a chosen app, follow the instructions and Help suggestions.
Some usable apps: http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
Do I have to activate it somehow?
Yes. You must launch the software to use it. Then follow the instructions and Help suggestions.
Or do I need extra software?
Not unless you want functions not provided by the iSight capable apps that came with your Mac OS (including iChat, QuickTime X, Photo Booth, etc.)
A new external video camera?
Only if you cannot make your iSight work or want features offered by an external cam but not by your inbuilt iSight.
I want to use this simply to check in on pets while away so I do not need high quality video. Thank you.
Choose from the *Webcam Apps* or iSight as a surveillance or Nanny cam: sections of this page, being certain your system supports the minimum requirements of the app whose features you want:
http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
Thank you.
You're welcome.
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Can I use my Canon Speedlight 199A with my Canon T2i?

I have a 199A from my days with my AE-1. Both work! Can I use the 199A with my T2i?

Automatic flash exposure with an AE-1 (btw, I still have my AE-1) and modern Canon E-TTL of today are VERY different.
While you can use your flash as a "manual" flash... you may want to invest in newer gear.
On your 199A, there was no "TTL" capability of the flash. That flash has 3 "auto" power levels... a high, medium, and low. It merely told the camera to set the f-stop to either f/2.8, f/5.6, or f/11.
The flash unit has a thyristor sensor on the front that measures the light return to the flash and then cuts off the flash when it thinks it's received enough light. Highly reflective surfaces could fool it into thinking it had recevied enough light and shut down even if the subject of interest was underexposed.
Modern E-TTL II flash is MUCH MUCH smarter. As the name implies, it is actual "TTL" metering... meaning the camera and flash are have bi-direction communication.
E-TTL does the following:
It meters the scene with no flash whatsoever -- using "evaluative" metering and noting the amount of light present in each zone of the scene.
It fires a pre-flash at low power level. Typically the default is 1/32nd power, but you can configure the flash to change that.
While the pre-flash is illuminating the scene, the camera meters the scene again.
The camera then compares each zone of the scene WITH the pre-flash to each zone of the scene WITHOUT the pre-flash. Respective zones with very big difference indicate reflective objects (e.g. mirrors). Zones with almost no difference indicate probable light sources (e.g. a light source in the scene... such as a table lamp, street light, etc.). Zones with a more reasonable difference indicate actual elements of the scene benefiting from flash. Having isolated zones which aren't reliable indicators of flash... the camera concentrates on calculating needed flash power by looking at the remaining zones.
If the flash is mounted on-camera and also pointed directly ahead (and ONLY if both of these conditions are true) THEN the E-TTL system will also request lens focusing distance information and take this into account when calcuating flash power. This is because the "inverse square" law can be applied. If the flash is off-camera then the computer cannot assume that the lens distance and flash distance are the same. Also if the flash is being bounced then the distance the light will need to travel will not match the lens focus distance. Hence, it only uses this info if both conditions are true.
With all of the above considered, the computer decides how much power should be used for the "real" shot and the camera opens the shutter and the flash fires using the calcuated power level.
All of this happens so fast that most people presume the flash just fired once.
Thyristor flash would be fooled by a strong light source (e.g. shooting into the sun and trying to use the flash as "fill" would fool the unit into thinking enough light had been delivered -- there are many things that could trick a thyristor-based auto flash.
Modern E-TTL does much more... that was just the basics, but you can see how the system is much more clever about figuring out how much power is really needed and knows how to isolate areas of the scene that used to fool auto-flash technologies of the past.
Modern flash can provide high-speed sync (rapid successive pulses of light as the curtain shutters sweep across the sensor at speeds faster than the flash "sync" speed.
Modern flash can also provide "2nd curtain" sync... where the flash fires just before closing the shutter rather than just after the shutter opens. When shooting a subject to imply motion while using flash, this provides more directional blur that the eye expects.
Some (but not all) modern flash can provide "multi-strobic" flash... where the flash pulses several times at a slower speed (you control) during a very long exposure. E.g. if I photograph an athelte "throwing a ball" you get images of them at many different points throughout the "throw" all in one exposure due to multi-strobic mode.
Most modern flash can participate in multi-light shooting scenarios where one flash acts as a "master" to tell the other units when to fire (and at what power level) and the others act as "slaves" (taking orders from the master) to provide better lighting (read specs carefully... some units can only be "slaves", some can only be "masters", and some can be either.)
Modern flash technology really has evolved and refined what you can do with flash.
Tim Campbell
5D II, 5D III, 60Da

After i install yosemite i can't use my canon printer

after i install yosemite i can't use my canon printer

Hi choon hun,
Thank you for using the Apple Support Communities; I'm sorry to hear you are still having print issues. If you have gone through the above linked article completely without reaching a resolution or a direction for further troubleshooting, you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action
Regards,
- Brenden

Re: Can't use Canon DR3060C

Similar Messages

Maybe you are looking for