Re: Error occurred while transporting a request from dev to quality in BW

Hi BW Guru's,
I have done minor enhancement on one Master Data Data Source. The transports went fine in R/3 side. But in BW system it is giving an error message
There is no DataSource with these attributes
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
The errors affect the following components:
So this is the error message can any one help me how to move further analysis on this issue.
Thanks in Advance,
Venkat

Hi Venkat,
The problem is during Replicate if the datasource in the target system or during trasport of the InfoSource related.
In this second situation try to transport the Transfer Roules of the InfoSource with all related under/bottom objects, the system will include the Replicate of the DataSource.
Check also if the mapping of the sender and receiver system is correct: Tools --> Mapping of the sorce system...
Ciao.
Riccardo.

Similar Messages

While transporting Key Figures from Dev to Quality system, error occured.

Hello Experts,
While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
field)".
Here, I have changed the data type of the key figure from Number type to Amount type. Then I activated them, captured in request and when transported I got the error saying "/BIC/AZPA1R_CT40-/BIC/ZPA1RBAL9 (specify reference table AND reference field)"
These Key Figures are used in ODS.
Is there I am missing something, please tell how can I make these transports successfull.
Thanks Ishdeep.

While transporting Key Figures from Development to Quality system, I am getting this error : " /BIC/AZPA1R_CT40-/BIC/ZPA1RBA10 (specify reference table AND reference
Yes you missed to transport reference object.
Previously key figure data type is number then you have changed to Amount. While changing data type to amount You should maintain reference char like 0currency, Doc_currency......in the Unit/currency tab. ( If you use fixed unit or currency no need to maintain any reference Object).
During transpotation you need to collect this reference char with main key figure and then transport.
With Regards,
Kishore.

Error while transporting Dimension Members from Dev to Quality

Hi all,
I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset XXXX
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'XXXX'
No access to environment 'XXXX'
BPF: Error reading master data
No access to environment 'XXXX'
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
please advise.
Thanks.
Ambika

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Error occurred while transporting request no. from development to productio

Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..

Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer

I am not able to run Report in Report viewer due to the below error:
Sys.WebForms.PageRequestManagerServerErrorException : An unknown error occured while processing the request on the server.The status code returned from server is 12019 in report viewer
This report works fine in SSRS tool. but after i deployed into sharepoint 2013 site, it throws error.
Please advise what needs to be done
Any help is really appreciated.
Thanks,
SP

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi,i am using iphone 4s,my problem is when i want to play video other than youtube file from facebook this message come out "An error occured while processing your request. Reference

Hi,i am using iphone 4s,my problem is when i want to play video other than youtube file from facebook this message come out "An error occured while processing your request. Reference

Is your friends phone jailbroke? Also are you using the facebook app? If so then you need to ask the developer of the app what the problem is.

Error Occured while processing a Request-openning a another coldfusion page from old page link

in one page there is dynamic link in that i want to open anather page...
code is compiled ok and page is at place where i refered a link but it gives error 'error occured while processing a request'
Error Diagnostic Information
An error has occurred.
HTTP/1.0 404 Object Not Found
this error shows please help me...
i am new in coldfusion.
Thanks.

Hi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia

My daughter sent a video of the puppies from her iPhone; my wife got the following error message when opening it: An error occurred while processing your request. Reference

The other copied recipient was able to open the link and play the video on her Macbook. What do you think could be wrong? Do you have any suggestions for me?

I did not realize there was not enough room for the error reference in the original post. The error message my wife received was:
An error occurred while processing your request.
Reference #50.2cc88f18.1337770650.1e469043

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Transportation failed while sending a request from DEV - Quality

Hi sdns,,,
                   I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
I got an error message like this,,
Start of the after-import method for object type R3TR ELEM (Activation Mode)
Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'
Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC
Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M
Start of the after-import method for object type R3TR ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
Post-import methods of change/transport request I11K903499 completed
     Start of subsequent processing ... 20070417044621
     End of subsequent processing... 20070417044624
Answering getz really appreciated,
Thanks & Regards,
Aluri

Hi,
This error will come when your are transporting any Query/ BW elements to Production system.
when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
you can change individaul elements also.
Regards,
Vish.

Azure Sql DB Export to Storage Container fails with "An error occurred while sending the request"

I've built a new VM from which I'm running PowerShell scripts to backup my databases. It had worked before on an old server for several months, and worked once on the new server, then I upgraded my Azure PowerShell cmdlets, and haven't been able to
get it to work again. The new version is 0.8.10.1.
Below is my source code, with sensitive stuff replaced with ?'s. When I display the $stctx and $dbctx, they seem to have reasonable values. I added the IP address of the server as an exception to the db firewall, and I've installed SQL Server
Mangement Studio and verified that I can connect to the database. I have a feeling there's something simple I've overlooked.
Here's are both error messages:
Start-AzureSqlDatabaseExport : An error occurred while sending the request.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Start-AzureSqlDatabaseExport : Error while copying content to a stream.
At C:\Users\Public\PublicCmds\test.ps1:29 char:1
+ Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Start-AzureSqlDatabaseExport], HttpRequestException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.SqlDatabase.Database.Cmdlet.StartAzureSqlDatabaseExport
Here is the source code:
param($dbname)
if ($dbname -eq $null) {
write-host "Database code must be specified"
return
$password = "????"| ConvertTo-SecureString -asPlainText -Force
$servercredential = new-object System.Management.Automation.PSCredential("????", $password)
$dbsize = 1
$dbrestorewait = 10
$dbserver = "????"
$stacct = $dbname
$stkey = "????"
$stctx = New-AzureStorageContext -StorageAccountName $stacct -StorageAccountKey $stkey
$dbctx = New-AzureSqlDatabaseServerContext -ServerName $dbserver -Credential $servercredential
$dt = Get-Date
$timestamp = "_" + $dt.Year + "-" + ("{0:D2}" -f $dt.Month) + "-" + ("{0:D2}" -f $dt.Day) + "-" + ("{0:D2}" -f $dt.Hour) + ("{0:D2}" -f $dt.Minute)
$bkupname = $dbname + $timestamp + ".bacpac"
write-host "db context"
$dbctx
write-host "storage context"
$stctx
write-host "Backup $dbname to $bkupname"
Start-AzureSqlDatabaseExport -SqlConnectionContext $dbctx -StorageContext $stctx -StorageContainerName databasebackup -DatabaseName $dbname -BlobName $bkupname

Hi Brad,
Mentioned script, with appropriate values, works on my system.
I'm able to export an Azure SQL database to blob storage. Am using version 0.8.10.1 of cmdlets, so this the same version mentioned in this problem description.
Can you please try using Add-AzureAccount and check if that helps. This is indicated in a different third-party blog.
http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1%29."http://answers.flyppdevportal.com/categories/azure/azuretroubleshooting.aspx?ID=8aee89fe-430e-45fe-af54-7c8ed3ac60e1
Does it work from a different machine with newly downloaded credentials.
Does it work for a newly created database (so minimal database size).
If above do not work, we may require additional details like RequestID, StorageAccountName, ServerName so an MS ticket may be more appropriate.
Girish Prajwal

Re: Error occurred while transporting a request from dev to quality in BW

Similar Messages

Maybe you are looking for