RE: (forte-users) Forte not letting go of Oracle connections+ RE: (fort

The bug was just reported yesterday so they might not have it available to
the public for a while. I am guessing this bug has been around since 3.M.?
and its very easy to verify it if its happening in your environment. Also I
have been talking to other user that are not using Oracle (Sybase instead)
who are also seen the same problem. I think this is a problem across all
database because there is some fundamental event or process that is not
taking place to close database connections. But just to be safe verify it
in your test environment before moving to 3.5. To verify if its happening
in your Forte version just create a small application that connects to the
database and run it in debug mode. Log into the database and then stop the
debug session. The connection will still be open. This will also occur
when you use the running man or in a deployed application.
ka
-----Original Message-----
From: Labeaux Schiek [mailto:DHSV017dhs.state.il.us]
Sent: Thursday, March 01, 2001 7:21 AM
To: kamran.aminlendware.com; Forte-userslists.xpedior.com
Subject: RE: (forte-users) Forte not letting go of Oracle connections +
RE: (forte-users) SQL Server Maximum DB Processes already allocated.
Hi Kamran,
I just looked up bug # 54610 in Cyber Support and it is not there yet, so a
question.
In your opinion, does this effect all databases? We are using DB2 and
considering going to 3.5 . Are we going to see the same problems you have
had with Oracle?
-thanks
-labeaux
"Amin, Kamran" <kamran.aminlendware.com> 02/28/01 05:28PM >>>Update on my problem. Well now its everybody's problem. Forte has
conformed the bug. Bug number 54610 for your reference.
thanks to everybody for the help..
ka
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Similar Messages

Forte not letting go of Oracle connections

Hello all,
some time ago we talked about the problem, that some DBSession-connects hang
if the partition where the DBSessionSO is used goes down.
Ok, there may be some problems with forte or the Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when partition goes down?
I mean the partition exits by a kill or by escript or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait, because i has to call
the service-objects
methods. Another solution may be a 'start task LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know the side-effects
because the thread calls
a method of the 'mother-process' which goes down also.
What is your solution or idea?
Joseph Mirwald
GERMANY

Hello all,
some time ago we talked about the problem, that some DBSession-connects hang
if the partition where the DBSessionSO is used goes down.
Ok, there may be some problems with forte or the Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when partition goes down?
I mean the partition exits by a kill or by escript or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait, because i has to call
the service-objects
methods. Another solution may be a 'start task LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know the side-effects
because the thread calls
a method of the 'mother-process' which goes down also.
What is your solution or idea?
Joseph Mirwald
GERMANY

Skype won't let me click on user and not let me wr...

Skype won't let me click on user and will not let me write, I have the latest version and I have a pc withwindows 7, you have installed all updates, hear that the problem is with internet explorer, but how to fix it,because when I go to internet explorer and for example look for facebook and you feel the same, does notlet me log in nose

Try this:
Go to Windows Start -> All Programs -> Accessories -> Right click on Command Prompt, select 'Run as administrator'.
In the Command Prompt type: cd c:\windows\syswow64 and press Enter.
Next type this and then press Enter:
regsvr32 jscript.dll
Next type this and press Enter:
regsvr32 jscript9.dll
After each Enter you should receive a message saying that DllRegisterServer in XXX.dll succeeded.
Reboot your computer.
Make now the test showing if your Internet Explorer can execute JavaScript.
Open in your Internet Explorer this page and watch the response:
http://javatester.org/javascript.html

HT4623 I had to restore my iphone before updating but then you have to activate it and it would not let me (i was connected to itunes)

When updating iPhone had to restore then activate, it would not let me tough i was connected to iTunes (update was complete just had to activate)

Shameel121 wrote:
... (update was complete just had to activate)
See this discussion.
https://discussions.apple.com/message/21189708

Billing user exit not letting internal order assignment

Hello,
I am assigning an internal order to a line item in billing user exit EXIT_SAPLV60B_004. But when the accounting document posts the IO field is blank.
System is letting me assign line item text using the same exit.
Please suggest a solution.
Thanks,
Sanjay W.

Hi
Is the IO also available in Sales Order? I think the Sales Order Account Assignment has a priority over what you try to enter at the time of release to Accouting interface, specifically with relation to Account Assignment. Logically SAP will loose track if IO is not there in the Sales Order and you try to update the same through the Exit
Regards
Sanil

Allowing the creation of users but not letting them be assigned to the Administrators group?

Hi
I am using Project Server 2013 on-prem, with Project Server Security. We have defined a local administrator group that is intended to allow for a limited set of permissions to local administrators. The reason for this is that we need the individual offices
in a global company to be able to add their own users, but we want the ability to change configuration of Project Server to be controlled centrally.
However I have found that once I give Manage Users and Groups permission to a user in this Local Administrator group they can then simply add themselves to the Administrator group anyway.
Setting policy and training is not proving effective, hence I need to limit this. The desire is for a group that can create users and add values to lookup tables, but not add themselves to the Administrator group.
Is this possible?
Thanks
Ryan

You could still take the approach of having your helpdesk assign the permissions and remove the manage users and groups permissions from the local administrators in an office (as opposed to switching to the different permission model).
I'm curious how training and policy isn't working -- you've asked (told) the users not to add themselves to the administration group and yet they do it anyway? Are they doing this so they have permissions to perform some other tasks?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Local user account not working after trying to connect to windows domain

Newb Question
I was trying to log into a domain with my macbook today at work without success. I think I selected something that is telling my mac to search the domain for the user account, and NOT the local computer. So now when I boot it up the local user account isn't displayed, only 'other...'. When I click that it takes me to a log in text box that doesn't accept either my long or short user names. I booted up from the Snow Leopard disk and tried to change my password there, and that can see the local account there (and lets me change the password). However, when I boot back up from the HDD I get the same problem.
Is there a way of telling it to look locally rather than on the domain when logging in?

you could reset password on the root account from the boot disk also while booted to the system disk, open startup disk, and make sure your computer is set to boot from the built in hard drive.
This will enable root, and hopefully you can log into the computer. try logging in with the user name 'root' and what ever password you set. if you do get in, you can go to apple menu, system preferences, accounts, login options.
Make sure to set display login in window to list.
also make sure that when you click on the join button under login options, that there is nothing there. as in blank.

Why do I get the following when message on Contacts which does not let me delete; Cannot connect to the account-enter password for -..-When i do this nothing happens, same message reappears?!

When trying to update/remove contacts i get the following message;
Contacts cannot connect to the account..........Enter password for ..........
This I do but the same thing repeats itself!
Also(?) I am unable to share photos, as 'server did not recognise user/password combination'?
All ideas appreciated!
Thanks
G

When trying to update/remove contacts i get the following message;
Contacts cannot connect to the account..........Enter password for ..........
This I do but the same thing repeats itself!
Also(?) I am unable to share photos, as 'server did not recognise user/password combination'?
All ideas appreciated!
Thanks
G

RE: (forte-users) Forte not letting go of Oracleconnections

Hello Amin, Samer and David,
thank you for your fast reply.
The technical support in Germany give at least a good idea to prevent the
problem in future:
Available at Forte 3.5 and above
ER #35575 : user wants TOOL code to detect partition
shutdown and time to do something
Add a new interface, AtExitHandler, to Framework, with just one
method: RunAtExit();
Add a new method to Partition:
AtExit(AtExitHandler);
At shutdown time, managed partitions will call RunAtExit on all
registered AtExitHandlers in the same sequence that they called
AtExit on the partition.
This activity takes place synchronously before we start tearing the
partition apart, with the partition explicitly set by the active part
agent to the one we are supposed to be shutting down, so it should be
pretty safe for the user to run any code he likes.
We will catch and display any exceptions produced by the callbacks,
so that errors don't keep shutdown from proceeding (it is still possible
for the user to write code that hangs and blocks shutdown that way,
but I don't know what we could do about that besides getting into
timeouts etc.).
I think it is always a good idea to disconnect the DB-Session because you
do it with
most other tools from Database automatically, so why don't do it generally
by use of
a programming-language?!?
I try this feature in any case.
Thanks for all who answered to this message
Joseph Mirwald
GERMANY
At 17:13 13.03.01 -0500, Amin, Kamran wrote:
That was the initial problem. Forte as logged a bug on this issue and
hopefully fix it soon.
Look for bug# 54610.
-----Original Message-----
From: Joseph Mirwald [mailto:jomirweb.de]
Sent: Tuesday, March 13, 2001 4:12 PM
To: Forte Users
Subject: (forte-users) Forte not letting go of Oracle connections
Hello all,
some time ago we talked about the problem, that some DBSession-connects hang
if the partition where the DBSessionSO is used goes down.
Ok, there may be some problems with forte or the Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when partition goes down?
I mean the partition exits by a kill or by escript or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait, because i has to call
the service-objects
methods. Another solution may be a 'start task LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know the side-effects
because the thread calls
a method of the 'mother-process' which goes down also.
What is your solution or idea?
Joseph Mirwald
GERMANY
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hello Amin, Samer and David,
thank you for your fast reply.
The technical support in Germany give at least a good idea to prevent the
problem in future:
Available at Forte 3.5 and above
ER #35575 : user wants TOOL code to detect partition
shutdown and time to do something
Add a new interface, AtExitHandler, to Framework, with just one
method: RunAtExit();
Add a new method to Partition:
AtExit(AtExitHandler);
At shutdown time, managed partitions will call RunAtExit on all
registered AtExitHandlers in the same sequence that they called
AtExit on the partition.
This activity takes place synchronously before we start tearing the
partition apart, with the partition explicitly set by the active part
agent to the one we are supposed to be shutting down, so it should be
pretty safe for the user to run any code he likes.
We will catch and display any exceptions produced by the callbacks,
so that errors don't keep shutdown from proceeding (it is still possible
for the user to write code that hangs and blocks shutdown that way,
but I don't know what we could do about that besides getting into
timeouts etc.).
I think it is always a good idea to disconnect the DB-Session because you
do it with
most other tools from Database automatically, so why don't do it generally
by use of
a programming-language?!?
I try this feature in any case.
Thanks for all who answered to this message
Joseph Mirwald
GERMANY
At 17:13 13.03.01 -0500, Amin, Kamran wrote:
That was the initial problem. Forte as logged a bug on this issue and
hopefully fix it soon.
Look for bug# 54610.
-----Original Message-----
From: Joseph Mirwald [mailto:jomirweb.de]
Sent: Tuesday, March 13, 2001 4:12 PM
To: Forte Users
Subject: (forte-users) Forte not letting go of Oracle connections
Hello all,
some time ago we talked about the problem, that some DBSession-connects hang
if the partition where the DBSessionSO is used goes down.
Ok, there may be some problems with forte or the Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when partition goes down?
I mean the partition exits by a kill or by escript or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait, because i has to call
the service-objects
methods. Another solution may be a 'start task LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know the side-effects
because the thread calls
a method of the 'mother-process' which goes down also.
What is your solution or idea?
Joseph Mirwald
GERMANY
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Re: (forte-users) (UPDATE) Forte not letting go of Oracleconnections

All,
I have been communicating with Forte regarding this
issue. I was informed that a fix for this bug will be
released in SP2 tentatively due at the end of May.
Forte also confirmed that the bug was introduced in
3.5 and exists in 3.5.1.
Samer Kanjo
--- Joseph Mirwald <jomirweb.de> wrote:
Hello all,
some time ago we talked about the problem, that some
DBSession-connects hang
if the partition where the DBSessionSO is used goes
down.
Ok, there may be some problems with forte or the
Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when
partition goes down?
I mean the partition exits by a kill or by escript
or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which
registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait,
because i has to call
the service-objects
methods. Another solution may be a 'start task
LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know
the side-effects
because the thread calls
a method of the 'mother-process' which goes down
also.
What is your solution or idea?
Joseph Mirwald
GERMANY
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com

All,
I have been communicating with Forte regarding this
issue. I was informed that a fix for this bug will be
released in SP2 tentatively due at the end of May.
Forte also confirmed that the bug was introduced in
3.5 and exists in 3.5.1.
Samer Kanjo
--- Joseph Mirwald <jomirweb.de> wrote:
Hello all,
some time ago we talked about the problem, that some
DBSession-connects hang
if the partition where the DBSessionSO is used goes
down.
Ok, there may be some problems with forte or the
Database (TWO_TASK, and so
on).
Does anybody implement a DBSession.Disconnect() when
partition goes down?
I mean the partition exits by a kill or by escript
or econsole, not by a
Forte-Method call
of somewhere else.
I thought the solution must be a loop which
registers for the
task.Shutdown-event, but at
the init-method I couldn't stay in a loop and wait,
because i has to call
the service-objects
methods. Another solution may be a 'start task
LoopMethod()' which are
registers the
event, but i don't try it now, because i don't know
the side-effects
because the thread calls
a method of the 'mother-process' which goes down
also.
What is your solution or idea?
Joseph Mirwald
GERMANY
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com

RE: (forte-users) Accelerator keys under MS Windows95/98/NT

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF001.9C8C0B50
Content-Type: text/plain
Unfortunately, ALT key is not recognized as a validkey modifier on Windows
That isn't entirely true. The ALT key is recognized. I've used it
successfully
under Windows 95 and NT. The only annoying side-effect is that you get the
standard operating system beep when you perform the keypress.
-----Original Message-----
From: "Ajith Kallambella" [SMTP:[email protected]]
Sent: Thursday, August 26, 1999 1:43 PM
To: "[email protected]" [SMTP:[email protected]];
"[email protected]" [SMTP:[email protected]]
Subject: Re: (forte-users) Accelerator keys under MS Windows 95/98/NT
The Window class has a method named SetAsFunctionKey
and an event named FunctionKeyPress. When used
in combination, the former can be used to configure
various accelerator keys for the window widgets
and the latter can be used to trap them.
For more details, take a look at Forte online help.
Unfortunately, ALT key is not recognized as a valid
key modifier on Windows, but is only available on
Unix and VMS - for reasons beyond my comprehension :(
Hope this helps
Ajith Kallambella M.
Forte Systems Consultant.
From: "Burns, Troy" <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: (forte-users) Accelerator keys under MS Windows 95/98/NT
Date: Thu, 26 Aug 1999 13:56:07 -0400
Let's say I have a pushbutton on a window and I've given it
label text of "&Search". In past developer-lives, the ampersand
is what gives the button the ability to respond to ALT-S. This
doesn't appear to be the case in Forte. What do I need to do
to make this work?
Thanks in advance,
Troy Burns
E-mail: [email protected]
Marriott Vacation Club International
941-688-7700 ext. 4408
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
------_=_NextPart_001_01BEF001.9C8C0B50
Content-Type: text/html
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>RE: (forte-users) Accelerator keys under MS Windows =
95/98/NT</TITLE>
</HEAD>
<BODY>
> Unfortunately, ALT key is not recognized as a =
valid
 key modifier on Windows

That isn't entirely true. The ALT key is recognized. =
I've used it successfully
 under Windows 95 and NT. The only annoying =
side-effect is that you get the
 standard operating system beep when you perform the =
keypress.

-----Original Message-----
 From: "Ajith Kallambella" =
[SMTP:[email protected]] 
 Sent: Thursday, August 26, 1999 1:43 PM
 To: "[email protected]" =
[SMTP:[email protected]];
 "[email protected]" =
[SMTP:[email protected]]
 Subject: Re: (forte-users) Accelerator keys under MS =
Windows 95/98/NT

 
The Window class has a method named =
SetAsFunctionKey
 and an event named FunctionKeyPress. When =
used
 in combination, the former can be used to =
configure
 various accelerator keys for the window =
widgets
 and the latter can be used to trap them.

For more details, take a look at Forte online =
help.

Unfortunately, ALT key is not recognized as a =
valid
 key modifier on Windows, but is only available =
on
 Unix and VMS - for reasons beyond my comprehension =
:(

Hope this helps

Ajith Kallambella M.
 Forte Systems Consultant.

 
>From: "Burns, Troy" =
<[email protected]>
 >To: "'[email protected]'" =
<[email protected]>
 >Subject: (forte-users) Accelerator keys under MS =
Windows 95/98/NT
 >Date: Thu, 26 Aug 1999 13:56:07 -0400
 >
 >Let's say I have a pushbutton on a window and =
I've given it
 >label text of "&Search". In =
past developer-lives, the ampersand
 >is what gives the button the ability to respond =
to ALT-S. This
 >doesn't appear to be the case in Forte. =
What do I need to do
 >to make this work?
 >
 >Thanks in advance,
 >
 >---------------------------------------------
 >Troy Burns
 >E-mail: [email protected]
 >Marriott Vacation Club International
 >941-688-7700 ext. 4408
 >
 >--
 >For the archives, go to: <A =
HREF=3D"<a href=
"http://lists.sageit.com/forte-users">http://lists.sageit.com/forte-users</a>" =
TARGET=3D"_blank">http://lists.sageit.com/forte-users</A> and =
use
 >the login: forte and the password: archive. To =
unsubscribe, send in a new
 >email the word: 'Unsubscribe' to: =
[email protected]
 >

 
_______________________________________________________________=

 Get Free Email and Do More On The Web. Visit <A =
HREF=3D"<a href="http://www.msn.com">http://www.msn.com</a>" =
TARGET=3D"_blank">http://www.msn.com</A>

--
 For the archives, go to: <A =
HREF=3D"<a href=
"http://lists.sageit.com/forte-users">http://lists.sageit.com/forte-users</a>" =
TARGET=3D"_blank">http://lists.sageit.com/forte-users</A> and =
use
 the login: forte and the password: archive. To =
unsubscribe, send in a new
 email the word: 'Unsubscribe' to: =
[email protected]

</BODY>
</HTML>
------_=_NextPart_001_01BEF001.9C8C0B50--

Hi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee

Re: (forte-users) Hi - Query on XML Import document -Hang

Double check that your XML is valid. I've seen
importDocument hang when I'm missing an end tag.
I don't think it's a validating parser.
Of course, there's no documentation, so.... :)
Chris
--- "Saravanan, Lakshmi N." <lnarayanoxhp.com> wrote:
Hi guys,
I am trying to import an XML document from a
Memory stream object. I
got the example
from this group ( It was very helpful ).
Sample Code :
l_MemStr : MemoryStream = new;
l_MemStr.Open( SP_AM_READ_WRITE );
l_MemStr.WriteText( source = l_XMLData );
l_MemStr.Seek( position=0 );
-- Create a Document object from the memory stream
myDoc : Document = new;
myDoc.importdocument( l_MemStr );
After this line nothing seems to happen.. the
partition just hangs... keeps
the CPU busy.
If i deploy the same in a NT or on a IBM box it
works fine. The problem is
with the Sequent box..( i guess ).
Did any of you guys face a problem like this...
Please let us know..
I would really appreciate it.
Thanks
Laks
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
http://mail.yahoo.com/

Well, Forte have agreed to release a patch for the XML bug on DG Unix with
Forte Version 3.0.M.2. I've attached a related mail with this.
- Charu.
-----Original Message-----
From: Epari, Madhusudhan [mailto:meparioxhp.com]
Sent: Friday, September 01, 2000 7:59 AM
To: 'Amin, Kamran'
Cc: 'forte-userslists.xpedior.com'
Subject: RE: (forte-users) Hi - Query on XML Import document - Hang
I did check the xml by opening it in IE 5.0 for it's well-formedness. Still
it's failing on sequent box.
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Friday, September 01, 2000 10:55 AM
To: 'Epari, Madhusudhan'
Subject: RE: (forte-users) Hi - Query on XML Import document - Hang
Well not really. One way to check if the xml is valid is to open it in IE
5.0. If its well formed then it will show up otherwise it will give you an
error. Also the document object is not the best code that came out of Forte
and has errors, so this might be a bug you will have to report. And they
are not giving any new patches until 3.5 comes out in 2 months.
ka
-----Original Message-----
From: Epari, Madhusudhan [mailto:meparioxhp.com]
Sent: Friday, September 01, 2000 10:52 AM
To: 'Christopher Fury'
Cc: 'forte-userslists.xpedior.com'
Subject: RE: (forte-users) Hi - Query on XML Import document - Hang
If the XML is invalid it should fail on all boxes. This should be a sequent
specific problem.
Madhu
-----Original Message-----
From: Christopher Fury [mailto:cfuryyahoo.com]
Sent: Friday, September 01, 2000 9:37 AM
To: 'forte-userslists.xpedior.com'
Subject: Re: (forte-users) Hi - Query on XML Import document - Hang
Double check that your XML is valid. I've seen
importDocument hang when I'm missing an end tag.
I don't think it's a validating parser.
Of course, there's no documentation, so.... :)
Chris
--- "Saravanan, Lakshmi N." <lnarayanoxhp.com> wrote:
Hi guys,
I am trying to import an XML document from a
Memory stream object. I
got the example
from this group ( It was very helpful ).
Sample Code :
l_MemStr : MemoryStream = new;
l_MemStr.Open( SP_AM_READ_WRITE );
l_MemStr.WriteText( source = l_XMLData );
l_MemStr.Seek( position=0 );
-- Create a Document object from the memory stream
myDoc : Document = new;
myDoc.importdocument( l_MemStr );
After this line nothing seems to happen.. the
partition just hangs... keeps
the CPU busy.
If i deploy the same in a NT or on a IBM box it
works fine. The problem is
with the Sequent box..( i guess ).
Did any of you guys face a problem like this...
Please let us know..
I would really appreciate it.
Thanks
Laks
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
http://mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

RE: (forte-users) Events in Interface

I know, I've implemented similar structures in other locations as well,
always without problems. I've even recreated the whole interface, building
it completely from dragging and dropping methods and events from the class
to the interface. Then I did a force compile of the whole workspace. It
still doesn't solve the problem. There must be some combination of things
that were different in the other circumstances, but I don't seem to be able
to find it. It's definately not an error in the code. There something wrong
in Forte internally, but I don't know which combination of factors causes
it.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
-----Original Message-----
From: Moris_Mihaildis/AUST/CSCcsc.com
[mailto:Moris_Mihaildis/AUST/CSCcsc.com]
Sent: Tuesday, April 03, 2001 5:00 AM
To: Rottier, Pascal
Cc: forte-userslists.xpedior.com
Subject: Re: (forte-users) Events in Interface
FYI. We are using Forte 3.0.J.4 and NT4.0 SP6, and have had no problems
implementing your pattern.
There should be no need for a fix (cast). There is something wrong with
your interface.
Regards,
Moris Mihailidis
Consulting
CSC
Level 4, 570 St. Kilda Road, Melbourne VIC 3004
Ph: 61-3-95364675 Fax: 61-3-95364633 Email: mmihailicsc.com.au
"Rottier, Pascal" <Rottier.Pascalpmintl.ch> on 04/02/2001 09:52:46 PM
To: "'Forte Users'" <forte-userslists.xpedior.com>
cc:
Subject: (forte-users) Events in Interface
We have the following scenario:
There is a Service Object that acts as a Facade (Facade pattern) for 3
manager classes that implement some business functions. Each of these three
managers are stored as private attributes on this Service Object.
For the sake of flexibility, these three private attributes are defined by
their Interface, not their class. When the Service Object opens an Event
Loop and registers for the events of one of these interfaces, the whole
partition crashes. Even when using the running man in the development
workshop, the whole partition crashes. The only way to fix that is to cast
the Interface to a class that implements the interface before registering
for the event.
I know it's possible to register for events using an Interface that
contains
these events, rather then a class that implements the events. Of course, at
runtime you do need a real instance of a class that implements the
interface, otherwise you get a NIL-exception.
Does anyone have any experience registering for events from Interfaces? Are
there unexpected circumstances where it should work semantically, but still
causes Forte to crash. We're using Forte 3.j.1 on NT 4.0 SP 6.
Any help is appreciated.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

I know, I've implemented similar structures in other locations as well,
always without problems. I've even recreated the whole interface, building
it completely from dragging and dropping methods and events from the class
to the interface. Then I did a force compile of the whole workspace. It
still doesn't solve the problem. There must be some combination of things
that were different in the other circumstances, but I don't seem to be able
to find it. It's definately not an error in the code. There something wrong
in Forte internally, but I don't know which combination of factors causes
it.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
-----Original Message-----
From: Moris_Mihaildis/AUST/CSCcsc.com
[mailto:Moris_Mihaildis/AUST/CSCcsc.com]
Sent: Tuesday, April 03, 2001 5:00 AM
To: Rottier, Pascal
Cc: forte-userslists.xpedior.com
Subject: Re: (forte-users) Events in Interface
FYI. We are using Forte 3.0.J.4 and NT4.0 SP6, and have had no problems
implementing your pattern.
There should be no need for a fix (cast). There is something wrong with
your interface.
Regards,
Moris Mihailidis
Consulting
CSC
Level 4, 570 St. Kilda Road, Melbourne VIC 3004
Ph: 61-3-95364675 Fax: 61-3-95364633 Email: mmihailicsc.com.au
"Rottier, Pascal" <Rottier.Pascalpmintl.ch> on 04/02/2001 09:52:46 PM
To: "'Forte Users'" <forte-userslists.xpedior.com>
cc:
Subject: (forte-users) Events in Interface
We have the following scenario:
There is a Service Object that acts as a Facade (Facade pattern) for 3
manager classes that implement some business functions. Each of these three
managers are stored as private attributes on this Service Object.
For the sake of flexibility, these three private attributes are defined by
their Interface, not their class. When the Service Object opens an Event
Loop and registers for the events of one of these interfaces, the whole
partition crashes. Even when using the running man in the development
workshop, the whole partition crashes. The only way to fix that is to cast
the Interface to a class that implements the interface before registering
for the event.
I know it's possible to register for events using an Interface that
contains
these events, rather then a class that implements the events. Of course, at
runtime you do need a real instance of a class that implements the
interface, otherwise you get a NIL-exception.
Does anyone have any experience registering for events from Interfaces? Are
there unexpected circumstances where it should work semantically, but still
causes Forte to crash. We're using Forte 3.j.1 on NT 4.0 SP 6.
Any help is appreciated.
Pascal Rottier
Atos Origin Nederland (BAS/West End User Computing)
Tel. +31 (0)10-2661223
Fax. +31 (0)10-2661199
E-mail: Pascal.Rottiernl.origin-it.com
++++++++++++++++++++++++++++
Philip Morris (Afd. MIS)
Tel. +31 (0)164-295149
Fax. +31 (0)164-294444
E-mail: Rottier.Pascalpmintl.ch
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

RE: (forte-users) Does anyone have experience using OracleLarge Objects

hi ,
A few months ago, I tried a oracle stored procedure with a BLOB parameter,
but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
hth
suma
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Thursday, March 29, 2001 2:40 PM
To: 'Forte User Group'
Cc: Magaliff, Bill
Subject: (forte-users) Does anyone have experience using Oracle Large
Objects (LOB's)?
Does anyone have experience using Oracle Large Objects (LOB's) -
specifically the CLOB datatype? Forte supports Oracle LONG's but given that
Oracle is going to phase out that datatype and they're trying to push users
towards CLOB's instead of LONG's, I want to find out if Forte can handle it
and, if so, what we should know about mapping Forte datatypes to the Oracle
CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
that they currently don't support it.]
thanks in advance.
ka
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hi,
Did you get any solution to this. If yes, please share.
Thanks,
Tints

Re: (forte-users) C++ version compatibility question. Fortev30L2 on D

Dirk:
I ran into a similar problem. I added an other flag to my fcompile script and
it seems to be working fine, your mileage may vary. The flag was
-cflags "-oldcxx only"
Dwayne Kryger
"Haben, Dirk" <[email protected]> on 08/25/99 02:09:16 AM
To: "'Soapbox Forte Users'" <[email protected]>
cc: (bcc: Dwayne Kryger/SEH)
Subject: (forte-users) C++ version compatibility question. Forte v30L2 on
Digital Unix 4 d and C++ version ???
G'day Folxs
Just installed Forte as a Simple Server on a Digital UNIX (v4.0d) box (being
a VMSbot it was much easier than I thought). We want to use it to interface
with an existing web client. The Forte part is to provide us a scalable
access path to Oracle DBs on the VMS machine; already running Forte.
I'm having trouble finding media that contains C++ v5.4.-006 for the Unix
box. Does anyone know of/has used higher versions of C++ without too much
drama? How about v5.7 or even v6.1? We will be using extensive C++
interfacing to existing web pages!
NB: The current web system client is compiled using EGCS 2.91.66.
TIA,
/[:-)irK
Dirk Haben, Perth WA
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Dirk:
I ran into a similar problem. I added an other flag to my fcompile script and
it seems to be working fine, your mileage may vary. The flag was
-cflags "-oldcxx only"
Dwayne Kryger
"Haben, Dirk" <[email protected]> on 08/25/99 02:09:16 AM
To: "'Soapbox Forte Users'" <[email protected]>
cc: (bcc: Dwayne Kryger/SEH)
Subject: (forte-users) C++ version compatibility question. Forte v30L2 on
Digital Unix 4 d and C++ version ???
G'day Folxs
Just installed Forte as a Simple Server on a Digital UNIX (v4.0d) box (being
a VMSbot it was much easier than I thought). We want to use it to interface
with an existing web client. The Forte part is to provide us a scalable
access path to Oracle DBs on the VMS machine; already running Forte.
I'm having trouble finding media that contains C++ v5.4.-006 for the Unix
box. Does anyone know of/has used higher versions of C++ without too much
drama? How about v5.7 or even v6.1? We will be using extensive C++
interfacing to existing web pages!
NB: The current web system client is compiled using EGCS 2.91.66.
TIA,
/[:-)irK
Dirk Haben, Perth WA
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

RE: (forte-users) Forte not letting go of Oracle connections+ RE: (fort

Similar Messages

Maybe you are looking for