RE-FX features differeing in ECC 6.0 and 4.7

Dear all
Please give some pointers on which are the features that are available in ECC 6.0 of real estate not available in SAP R/3 4.7.flexible.
Also in the first place need some under standing whether in 4.7 flexible real estate can be used.
Regards.
VaraPrasad.

Hi Vara,
please have a look at SAP note 517673. It describes functions available in which release and restrictions.
In release 4.7, it can be used in Financials Extension Set 2.00.(also mentioned in the note)
Hope this information is helpful for you.
Regards, Franz

Similar Messages

Is any different between ECC 5.0 and ECC 6.0 for Excel export?

Dear all,
As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
Thanks again.

Installing XSS (ESS and MSS) on EP 7 and ECC 5.0 (and ECC 6.0)

Hello,
I need to install XSS (ESS and MSS) on EP 7.0 SP9 and ECC 5.0 and also on ECC 6.0.
I do NOT know what steps I need to perform (installations & configurations).
Could anyone please help me ?
Is the procedure different between ECC 5.0 and ECC 6.0 ?
Please, help.
Kind regards,
Gil

Hello Gil,
1) As I wrote in my second posting, I think I installed the EP 7.0 correctly for XSS and the BP ERP for ERP2005.
Where can I find what configurations I need to undertake and what patches I should install so the XSS and the BP will work correctly ? (that is besides getting error messages when using an XSS iView)
<b>You need to install the foloowing Web Dynpro Components in ur J2EE server.
PCI_GP
MSS</b>
2) If the projects decides NOT to upgrade to ERP 2005 BUT to stay with ERP 2004, do I need to install the EP 7.0 ALL over AGAIN ?
If so, how do I install both the BP ERP 2004 and XSS on it in ONE installation (as I performed in for the BP ERP 2005) ?
If NOT, how do I uninstall the BP ERP and XSS of the ERP 2005 and install those for ERP 2004 ? OR does the BP ERP 2005 support ERP 2004 as well ?
<b>The pre-requiste for BP ERP2005 is a backend ERP2005. So it will not function with backend ERP 2004.
You don't need to uninstall anything. Just download the Mysap ERP 2004 BP and do the necessary configuration to connect it to the BACKEND ERP 2004.This will solve the problem.
You can find the configuration guides and other information abt the BP here.
https://websmp205.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687949& --> Click on Documents -> Manager Self service.
Hope this solves ur problem.</b>
Regards
Deb
[Reward points for helpful answers]

I need a table of the different features for Adobe Standard 9, 10 and 11?

I need a table of the different features for Adobe Standard 9, 10 and 11 so that can advise my client which version can be packaed and deployed via SCCM. A detailed list of features for each version would be most useful.
Regards Paul Jenkins

See the following documents:
Acrobat Standard 9, X and XI : http://www.adobe.com/products/acrobatstandard/buying-guide-version-comparison.html
Acrobat Pro 9, X and XI : http://www.adobe.com/products/acrobatpro/buying-guide-version-comparison.html
Back to version 7 : http://prodesigntools.com/version-comparison-differences-between-adobe-acrobat-x-10-9-8-7. html

BW calendar is different from ECC calendar

Hello,
I have discovered that BW calendar is different from ECC calendar.
For example , day Oct NN is assigned to week XX of BW calendar and week XX-1 of ECC calendar.
Is it a bug or normal case? How to allign BW calendar to ECC calendar?
Thanks

Try reimporting the calendars.
GO TO RSA1 >> Source Systems >> RIGHTCLICK on your Source systems >> TRNASFER THE CALENDARS >> Check the second option and press F8.
Please do close the question if you have got the answer or solved the issue.
regards,
Den

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Different Version PI 7.0 and SPROXY

Hi Experts,
I am doing ABAP Server Proxy scenarios and I am facing a very different issue in the look and feel of the UI.
My current PI version is PI 7.0 EHP1.0 SP4 in which my icon in interface objects appear as MESSAGE INTERFACE.
Now when after configuring settings in the ECC 6.0 , when I go to SPROXY to create proxy I find my Message Interface appearing as "SERVICE INTERFACE" in Sproxy. Interestingly the message from the XI is successfully reaching the ECC 6.0 ,
as I can also view my message in SXMB_MONI of ECC6.0 where the messages are in green flag status as a result of which my values from the structure are not getting updated in the table where I intend to do.
Now I have a doubt that weather this Message Interface in PI and the Service Interface in ECC 6.0 might be the reason for this
failure of the execution of the proxy class generated.
When I try to independently checking the code then the values are getting populated in the Table where I intend to do.
Regards
Nishant Kumar Singh

>
nishant singh wrote:
> Hi Experts,
>
> I am doing ABAP Server Proxy scenarios and I am facing a very different issue in the look and feel of the UI.
> My current PI version is PI 7.0 EHP1.0 SP4 in which my icon in interface objects appear as MESSAGE INTERFACE.
> Now when after configuring settings in the ECC 6.0 , when I go to SPROXY to create proxy I find my Message Interface appearing as "SERVICE INTERFACE" in Sproxy. Interestingly the message from the XI is successfully reaching the ECC 6.0 ,
> as I can also view my message in SXMB_MONI of ECC6.0 where the messages are in green flag status as a result of which my values from the structure are not getting updated in the table where I intend to do.
>
> Now I have a doubt that weather this Message Interface in PI and the Service Interface in ECC 6.0 might be the reason for this
> failure of the execution of the proxy class generated.
>
> When I try to independently checking the code then the values are getting populated in the Table where I intend to do.
>
>
> Regards
> Nishant Kumar Singh
it is normal to have message interface in PI 7.0 and the same being described as service interface in ecc 6.0. so dont worry about it
in sxmb_moni of ecc, check the green flag.
what does the description say?
also check smq1 and smq2 in ecc.

Difference between ecc 5.0 and 4.7 or earlier in MM

Hello masters,
would you briefly explain the diffrence between ecc 5.0 and 4.7. as per MM module is concerened ,any document or link given will be appriciated .
Thanks in Advance,
Suresh.

Please check these links...
Upgrading notes 4.7 Vs ECC6
Solution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
ECC 5.0:
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Thanks
Senthil

Are ECC 5.0 and ECC 6.0 components and can run without Netweaver?

Hi Experts,
As you know I'm new SAP Basis/NetWeaver on my new job. What is the difference between ECC 5.0 and ECC 6.0? how and where we install NetWeaver or
how we configured netweaver, is it a separate product? how it talks to Backend system? where do assigned roles in NetWeaver or in Backend system? How can we monitor SSL cert's? urgent...please help.
Thanks,
Frank.

Hi,
Your question needs lot of explanation but i would try to make it short and simple.
First SAPNetweaver is platform for all the new releases.Previously, in SAP R/3 4.6C the platform was SAP BASIS after that comes SAP R/3 ENTERPRISE which was SAP web AS then Came in mySAP ERP Edition 2003 main component was SAP R/3 Enterprise powered by SAP Netweaver and then mwSAP ERP Edition 2005 main component SAP ECC 5.( ERP centeral component).This ECC comes under my SAP ERP and it consists of other as well like portal,BI,SRM,SCM,SEM etc. SAP netweaver has its own features which u can search online and u will get lot of information on this platform which all u r getting in these new relases powered by SAP netweaver.SO it goes like
SAP R/3 3.1----->SAP R/3 4.6C>SAP R/3 Enterprise-->mySAP ERP2004 -
>mySAP ERP 2005.
There are two stacks in SAP web AS 6.4 ABAP and Java both has diffrent schema's.
where do assigned roles in NetWeaver or in Backend system?
For ABAP we can assign the roles from Tcode : pfcg
and for Java UME or Visual administrator .. it depends on the datasource.
For maintainning SSL u can view tcode :STRUST
I hope it has cleared ... if yes reward points

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook 5,1? The intel is different (2Ghz not 2.3) and the speed is 1067 not 1333. But they are both DDR3.

Can I put the 2Gb RAM (X2) from my MacBook Pro into my MacBook? The intel is different (2Ghz not 2.3) and the speed is 2000 not 1333. But they are both DDR3.
I have just upgraded the Pro to 16Gb and the MacBook is SO slow. Just wondering if I could use the old RAM.

Full specification of MB5.1 RAM;
204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
MBP8.1, 8.2 or 8.3;
204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM, non-ECC (non parity), unbuffered.
PC3 is the same as DDR3. the number is peak transfer rate (approximated).
Further reading suggests your swap may work, but it's not guaranteed. If you get 3 beeps on start up (or the sleep light flashing in bursts of 3), first check it's correctly seated, but be prepared to swap them back.
If you encounter any instability or kernel panics, change them back.

Users working in version ECC 6.0 and above

hi
I need some help, I am trying to run this code on my system but not able to get the desired result,
i just want to test whether other users working on ECC 6.0 and above can run this code from their system.
Just copy, paste and run this code... I will get an e-mail automatically, I shall reward points in return, please help me with this...
REPORT bcs_example_5.
* This example shows how to send
*   - a simple text provided in an internal table of text lines
*   - and an attached MS word document provided in internal table
*   - to some internet email address.
* All activities done via facade CL_BCS!
DATA: send_request       TYPE REF TO cl_bcs.
DATA: text               TYPE bcsy_text.
data: binary_content     type solix_tab.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
DATA: bcs_exception      type ref to cx_bcs.
data: sent_to_all        type os_boolean.
START-OF-SELECTION.
    PERFORM main.
*       FORM main                                                     *
FORM main.
try.
*     -------- create persistent send request ------------------------
      send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document with attachment ---------------
*     create document from internal table with text
      APPEND 'Hello world!' TO text.
      document = cl_document_bcs=>create_document(
                      i_type    = 'RAW'
                      i_text    = text
                      i_length = '12'
                      i_subject = '' ).
*     add attachment to document
*     BCS expects document content here e.g. from document upload
*     binary_content = ...
      CALL METHOD document->add_attachment
        EXPORTING i_attachment_type = 'DOC'
                   i_attachment_subject = 'My attachment'
                   i_att_content_hex    = binary_content.
*subject line more than 50 chars
      DATA: T_SUB TYPE STRING.
      t_sub = '[ D01 TEST] CCS0000096 NJ 8A7192 21 CONSTITUTION AVE'.
      call method send_request->set_message_subject( t_sub ).
*     add document to send request
      CALL METHOD send_request->set_document( document ).
*     --------- set sender -------------------------------------------
*     note: this is necessary only if you want to set the sender
*           different from actual user (SY-UNAME). Otherwise sender is
*           set automatically with actual user.
      sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD send_request->set_sender
        EXPORTING i_sender = sender.
*     --------- add recipient (e-mail address) -----------------------
*     create recipient - please replace e-mail address !!!
      recipient = cl_cam_address_bcs=>create_internet_address(
                                        '[email protected]' ).
* To send the mail immediately
      call method send_request->set_send_immediately( 'X' ).
*     add recipient with its respective attributes to send request
      CALL METHOD send_request->add_recipient
        EXPORTING
          i_recipient = recipient
          i_express    = 'X'.
*     ---------- send document ---------------------------------------
      CALL METHOD send_request->send(
        exporting
          i_with_error_screen = 'X'
        receiving
          result              = sent_to_all ).
      if sent_to_all = 'X'.
        write text-003.
      endif.
      COMMIT WORK.
* *                     exception handling
* * replace this very rudimentary exception handling
* * with your own one !!!
catch cx_bcs into bcs_exception.
    write: 'Fehler aufgetreten.'(001).
    write: 'Fehlertyp:'(002), bcs_exception->error_type.
    exit.
endtry.
ENDFORM.

Hi,
The following code is i have done in ECC 6.0 working fine for me. May this one help you in anyway.
data: send_request       type ref to cl_bcs.
data: document           type ref to cl_document_bcs.
data: sender             type ref to cl_sapuser_bcs.
data: recipient          type ref to if_recipient_bcs.
data: exception_info     type ref to if_os_exception_info,
bcs_exception            type ref to cx_document_bcs.
data i_attachment_size type sood-objlen.
data v_status          type bcs_stml.
data v_request_status type bcs_rqst.
send_request = cl_bcs=>create_persistent( ).
try.
      document = cl_document_bcs=>create_document(
                                    i_type    = 'RAW'
                                    i_text = it_content[]
                                    i_subject = subject ).
      if not attach_name1 is initial.
        call method document->add_attachment
          exporting
            i_attachment_type    = attach_ext1
            i_attachment_subject = attach_name1
            i_att_content_text   = it_attach1[].
      endif.
      if not attach_name2 is initial.
        call method document->add_attachment
          exporting
            i_attachment_type    = attach_ext2
            i_attachment_subject = attach_name2
            i_att_content_text   = it_attach2[].
      endif.
      if not attach_name3 is initial.
        call method document->add_attachment
          exporting
            i_attachment_type    = attach_ext3
            i_attachment_subject = attach_name3
            i_att_content_text   = it_attach3[].
      endif.
      if not attach_name4 is initial.
        call method document->add_attachment
          exporting
            i_attachment_type    = attach_ext4
            i_attachment_subject = attach_name4
            i_att_content_text   = it_attach4[].
      endif.
      if not attach_name5 is initial.
        call method document->add_attachment
          exporting
            i_attachment_type    = attach_ext5
            i_attachment_subject = attach_name5
            i_att_content_text   = it_attach5[].
      endif.
      call method send_request->set_document( document ).
      sender = cl_sapuser_bcs=>create( sy-uname ).
      call method send_request->set_sender
        exporting
          i_sender = sender.
      loop at it_recipient.
        translate it_recipient-smtp_addr to lower case.
        recipient = cl_cam_address_bcs=>create_internet_address( it_recipient-smtp_addr ).
        call method send_request->add_recipient
          exporting
            i_recipient = recipient
            i_express    = ' '
            i_copy       = ' '
            i_blind_copy = ' '
            i_no_forward = ' '.
      endloop.
      move : 'E' to v_request_status.
      v_status = v_request_status.
      call method send_request->set_status_attributes
        exporting
          i_requested_status = v_request_status
          i_status_mail      = v_status.
      call method send_request->send( ).
      commit work.
    catch cx_document_bcs into bcs_exception.
endtry.
I could not able to check your code in development boxes of mine . sorry.
aRs

My password for icloud is different from my Apple id and I can't change my icloud password, where can I get that changed?

My password for icloud is different from my Apple id and I can't change my icloud password, where can I get that changed?

Your Apple ID is required to log in to iCloud, yes? I think you are rquired to re-sign in when performing an iCloud feature?

Added ram to mac pro, get ecc memory error and 4mem/9/40000006: B:0 C:0 R:0

I recently purchased a 2.8 8 core Mac pro (early '08 model). It came shipped with 2gigs of ram (one gig on riser card a, one gig on riser b).
I purchased 2 1gig sticks from ramjet, i followed a apple tutorial and installed the 2 original sticks in riser card A (slots 1 and 2), and the 2 new Ramjet sticks in riser card B (slots 1 and 2) for a total of 4gigs.
When I powered on the computer everything was fine, clicked the black apple logo to view "about this mac" and the 4gigs total memory showed up. However when i clicked "more info" then "memory"... it showed the status on one of the new ramjet sticks as "ecc error"
I rebooted the computer and the error message was gone, all sticks showed a status of "ok"
a few days went by and i was constantly checking the system profiler and the status would always show the sticks as "ok" and the computer acts totally normal, i run pro tools, logic pro, photoshop and it would run flawlessly.
The fact it showed an error a few days prior was still bugging me so i decided to call the applecare protection and consult with them... they said to remove and re-install the memory, reboot holding down the "option + command + R + P" to reset memory, then to reboot again holding down the "D" to do a Apple hardware Test.
the first test showed pass, i checked the extended test and that showed a 4mem/9/40000006: B:0 C:0 R:0 error, the second and 3rd tests froze and i had to push the power button to reboot.
I contacted Applecare once again and they said that since my computer was not acting funny nor freezing during apps or showing any errors that it should be fine, as long as the status said "ok" in system profiler and all four gigs registered in "about this mac" that no harm is going to happen.
when i asked what that long error code was she said it did not come up in her computer but she thinks its because its not official apple memory.
I tried searching online in forums to solve this but i cant find anything on that specific error code.
sorry for the long post but i wanted to be as detailed as possible to get the best advice
thanks and any help would be much appreciated.
and by the way i did contact ramjet and they are willing to replace my memory but there advice was also not to worry that its only giving that error due to the memory not being "official" apple memory, but if it registers and the computer acts totally normal to just leave it be.
thanks again,
David
Message was edited by: priv510
Message was edited by: priv510

thanks for the reply Kappy,
yes they have heat sinks and ramjet states they are "apple grade"
i downloaded the istat widget (not sure how accurate that is) and it says the apple sticks on A run at 32 degrees and the ones on B run at 31 degrees
the comp is practically brand new and when i opened it for the ram install it still looked brand new (no dust) its only a few weeks old.
I am going to return the sticks for sure to be safe but where im lost is.... yes it did show ecc error once, never again, its been a week now still no ecc error. I ran tech tool deluxe and everything passes, i ran "Rember memory test" and it passes, system profiler registers all 4 gigs and shows status as ok, computer acts totally normal? but the apple hardware test fails i guess im lost to why the comp says the ram is ok nd passes most tests just not the AHT test.
Thanks for your help i hope the new sticks dont show any error
David
O and I forgot to mention i called applecare again and requested a different agent to help me and he said Ecc stands for error correcting? so if it came up once and not again it did what it was suppose to do... corrected itself (now that sounds like more b.s to me but i have no idea about computer stuff )
Message was edited by: priv510

Different delivery doc types? and its purposes?

different delivery doc types? and its purposes?

Hi Ewout
There is no feature where you can maintain Doc types and Keywords for a Solution. This data is copied from the Project into the Solution Directory if you have created one.
Regards
Amit

RE-FX features differeing in ECC 6.0 and 4.7

Similar Messages

Maybe you are looking for