Re: How do solve volume adjust problem on background music with voice

I have using Captivate 6,i have facing in adjust volume on background music with voice when drag play bar and using backward,forward buttons in preview.

Hey there,
And welcome to Apple Discussions.
If your iPod, is a 30 GB model, then it is a 5th generation iPod. This information can be found here: [Identifying iPod Models|http://support.apple.com/kb/HT1353]
There are a few ways you could go about solving this issue. The first thing is to enable Sound Check on your iPod, which can be found under *Main Menu -> Settings -> Sound Check*. Next, be sure the option is also enabled in iTunes. The setting is in iTunes preferences Playback pane. Place a check next to the box for *Sound Check*.
Another option is to adjust the overall volume of the song in iTunes, and then sync the updated changes to your iPod. To do this, locate the song(s) in iTunes, right->click and choose *Get Info* from the menu. From there, head over to the Options tab. Move the slider up and down depending on whether you want to bring the overall volume up or down and then hit Ok when you are finished. Lastly, sync your iPod to update the changes made to the altered songs. See if that helps.
There are also excellent 3rd party applications that can adjust the songs overall volume. One can be found [HERE|http://mp3gain.sourceforge.net>.
Hope this helps.
B-rock

Similar Messages

How do I correct the problem of two routers with the same OSPF Router IDs?

How do I correct the problem of two routers with the same OSPF Router IDs?

Hi,
The answer above is correct, though you don't really need to reload, you can just simply clear the OSPF process with the following command:
clear ip ospf 1 process
HTH

How to solve a boot problem

I was working on my Mac and it was very slow, so i turned it off (it was like quarter and hour while shutdown). After, i tried to boot it again, but didn't boot, so i entered Verbose mode. Error was "disk0s2: media is not present". I entered sigle user mode and i did "fsck -fy". It did the check and it was "The volume Macintosh HD appears to be OK. FILE SYSTEM WAS MODIFIED. I did fsck -fy again (i read on a forum that is necessary to do this till it doesn't appear FILE SYSTEM WAS MODIFIED) and it didn't appeared, only appered again "The volume Macintosh HD appears to be OK", so i logged out, but the disk0s2: media is not present was on screen another time. I booted from Mac OS X installation DVD, and i opened Disk Utility. It appeared the wait cursor and freezed. I held the Power button for shutdown and booted again from same DVD. I selected the installation program and when it checked the HDs for install it appeared Macintosh HD with 159'7 GB and 31'97 GB free, but when HD check finished, it disappeared. After doing that like 5 times, Macintosh HD didn't appear anymore when checking. From the single user mode i can enter to HD directories, like /Applications/Parallels or /Applications/ToySight etc. I need help for how to boot again my Mac or how to reinstall Mac OS without losing anything, or how to do a backup. Thanks.

CAH4E3 wrote:
Got my new customized iMac 27' yeasterday. After installing some soft, I decided to install Windows 7 as second OS on Boot Camp. After clicking the Boot Camp Assistant icon, programm opens, and immediately it shows error "Boot Camp Assistaint does not support Windows installation on this iMac 3TB" or something like that (I have a russian version of dashboard/OS). Only option available at that moment - button "OK", which exits Boot Camp A|ssistant.
So... Any suggestions on how to solve the problem? I really need Windows as second OS, and don't want to install it like a virtual/emulator machine.
My customized iMac "loadout" is Core i7 3.4, 16Gb DDR, Nvidia GeForce 680MX 2Gb, 3TB Hard Drive.
P.S. I thought this may be solved by separating Hard Drive into partitions (main, which is for Mac OS, and little tome for Windows, formated into MS DOS FAT system), still - this has not helped me.
There is a thread covering this subject here. I would advise you to read the whole thread before trying the 'solution'.

Does anybody know how to solve this font problem?

Hello everyone,
I have had this font problem for weeks now and I can't seem to get it solved. There are a number of fonts that won't load properly in Illustrator, PS, and InDesign. They are loaded in the system, but refuse to show up in the list. I've installed them in the home directory/library/fonts. These are commercial opentype fonts and one homemade opentype font. Sometimes the font that I created will appear, other times it does not, but many other fonts refuse to show up in the font display lists of these 3 software packages.
I've cleared the font caches with FontNuke, everything looks like it should work properly, but it does not. Also, with Font Book, I've resolved any duplicate font problems. Does anybody know how to solve this problem? Is this a known CS4 bug?
Any help would be greatly appreciated. I'm using the latest Mac Mini and CS4 software.
Thanks in advance.
CB

Hi,
How do I check if the fonts have the correct creator and so on?
Anyway, I've spent the better part of today validating and removing suspect
fonts. Why does the right click choice for resolve duplicates and the
validate font behave completely differently in Font Book? I discovered that
when this is investigated further with the validate font command, I found I
had a massive amount of duplicates that according to font book cause minor
errors. I thought that would have been sorted out with the resolve duplicate
command, instead I ended up check marking and manually removing the fonts
that had minor errors.
I still have many commercial fonts plus my own font not showing up in
Illustrator or PhotoShop. If I copy and paste the font directly into
InDesign's font folder, my font shows up. I also tried removing my font to
see if this would fix any of the other problems. It doesn't. I did type in
my font name in the console dialog box and this message is displayed for
this font as well as mine and many others.
10-04-06 5:21:09 PM Font Book[12940] ##### ERROR: The font system thinks
the font
file://localhost/Library/Fonts/Voluta%20Script%20Pro/VolutaScriptPro-Regular.otf
is active, but the file no longer exists!
Then I went back to font book to check to see if it is there and it is
enabled. For my font the caution triangle appears with the multiple copies
of the font is installed. Resolving duplicates doesn't solve this problem.
Any ideas of how to fix this problem?
Thanks
CB

How to solve parameter passing problem?

I have a report that can be place on any Portal page and it requires several parameters.
The report is based on a query:
select bldgname
from building
where (bldcntry = :cntry or :cntry is null) and
(bldstate = :state or :state is null) and
(bldcity = :city or :city is null)
The LOVs for the bind variables need to be linked, i.e. State LOV is function of Cntry LOV and city LOV is function of both cntry LOV and state LOV.
I can't use the Customization screen because it doesn't allow linked LOVs.
I can't use a master detail form because I would have to create a table consisting of the 3 bind variables, M/D forms don't work with views. Since this is just one of 60 reports I have to do, it would mean adding 60 of these pseudo tables.
I was thinking of placing a form, which can have linked LOVs, on the same page as the report, and then calling the page and passing the values of the LOV to three page parameters. Unfortunately, I need to dynamically determine the url of the page the report and form are on and p_page_url doesn't seem to be accessible from a form, although it is from a report, I have a TAR on this issue.
So I wonder if anyone has an idea how to solve this problem?
Larry

Hi,
Try calling the report from the success procedure of the form
Here is an example which calls the report from the success procedure of the form.
declare
flightno number;
ticketno varchar2(30);
blk varchar2(10) := 'DEFAULT';
l_url varchar2(2000);
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
l_url := 'http://domain/pls/reportname.show?p_arg_names=flightno&p_arg_values='||flightno||'&p_arg_names=ticketno&p_arg_values='||ticketno;
call(l_url);
end;
Thanks,
Sharmila

How to solve this belowed problem in Windows pc?

I have installed windows 7 32 bit os,And then i installed java 7.I have set the path variable as bin and i have set the JAVA_HOME variable properly. After that i try to run in command as >java it did show any thing and then i tried > java -v or trying to run a program it shows an same error like "There was problem starting java.The specified module could not found". Check out sample problem screenshot http://velshare.blogspot.in/2013/06/how-to-solve-this-issue.html. How can i solve this problem ?

I use paintImmediately() method. Here is a thread that shows how it works:
http://forum.java.sun.com/thread.jsp?forum=57&thread=234114

How to solve this GUI problem

Hi, I wrote a network application using GUI, which retrieve some info from net. The problem is that when I press a button for action the whole GUI get freeze until the whole operation finish ( finish retrieving info) and also don�t display any formation until it finish the whole operation but it suppose display info as soon as it get it (since the GUI get froze it does not display anything until it finish.) Does anybody knows how to solve it.?? Thank you

I use paintImmediately() method. Here is a thread that shows how it works:
http://forum.java.sun.com/thread.jsp?forum=57&thread=234114

How to solve the setColor() problem with multithreading?

My fractal program uses a custom number of threads to draw the complete image. If I use just 1 thread, the image looks clean, if I use more threads some pixels of the image gets other colors. The problem ist the painting code:
g2d.setColor(col);
g2d.drawLine(x, y, x, y);as it is necessary to first set the color of the graphics object and then draw the line. I can solve this pixel color problem by synchronizing the Graphics2D object:
synchronized (g2d) {
g2d.setColor(col);
g2d.drawLine(x, y, x, y);
}but this slows the code down to times where just 1 thread is calculating the image. Unfortunately, I can't find a draw() method that has a color parameter.
I tried to divide the panel into multiple BufferedImages (1 for each thread) which solves the pixel problem but only the first BufferedImage get's drawn.

I solved my problem now. My solution is to use a separate BufferedImage for each Thread. I still had a bug where i didn't transformed the x/y coordinates of the complete image to the shifted x/y coordinates of the single BufferedImages, so that the threads draw the image out of the visible area which looked like all threads after the first only had a black image. After adjusting teh coordinates, the fractal now gets drawn correctly. And boy it's much faster with multiple threads - even on single core systems. On a dual core system, using 10-20 threads about doubles the performance as both cores have work almost all the time until the fractal is finished. :-)

How to solve the error problem

Hi Devs ...
I have been learning Adobe Flex and using IDE Flash Builder 4. but Im fasing an unsolve able problem in code given bellow..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:mx="library://ns.adobe.com/flex/mx" layout="vertical" minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <mx:states>
        <mx:State name="details"> /////////Here comes an error saying:-->State overrides may no longer be explicitly declared. The legacy states                                                                     /////syntax has been deprecated.
            <mx:AddChild position="lastChild">
                <mx:Text text="About Picture" width="200" fontWeight="bold"/>
            </mx:AddChild>
            <mx:AddChild position="lastChild">
                <mx:Text text="this is the picture of futue of Windows" width="200"/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Image source="assets/att66298.jpg" rollOver="currentState='detail'"/>
</mx:Application>
please tell me how to slove this error problem.
Arshay..


<root>
< myxml label="something" >
</root>

<root>
<myxml label="something">
</myxml></root>

How to solve the error problem error:1088 in flex builder 3

I'm facing an error while creating an application from Database using wamp web server please tell me how to solve this?


<root>
< myxml label="something" >
</root>

<root>
<myxml label="something">
</myxml></root>

How to solve siri network problem on iphone 4s

can anyone of you know how the sovle the network problem of siri of iphone 4s ?

Please search the forums before posting. The issue of flash has been beaten into submission many time here.

How do I find and save the background music file of my Flash site?

I see that the background music in my Flash site is located in a symbol called muz. When I click the properties of this symbol, the sound file's location is listed as .\flash\sound\muz.wav I couldn't find that sound sub-folder in the flash folder nor could I find the file. I tried doing a search to look for the muz.wav file in my computer but it could not be found. Does anyone know how I can find and save this file? Can the symbol somehow be exported and the sound file be extracted that way?

I copied and pasted the symbol into an empty .fla file. This new .fla file is just 1 frame. Can you tell me what you mean by "spreading" it along the timeline? When I tried exporting it to a .wav file (as just 1 frame in timeline), I only hear a fraction of a fraction of the first note of the music in the generated .wav file. The music is heard fine in its entirety when previewing the .fla file (F12).
By the way, in the symbol's properties, there is an option to "Export for ActionScript" and an option to "Export for runtime sharing". Do you think any of these would work?

Can't adjust end of background music..only the start adjusts

Struggling to edit my background music on my video in iMovie 11.
I can select the position of the start but not the end...any ideas?
Thanks
Neil

Hey, thank alot, it worked like a charm, BUT another problem just popped up, I used trapcode shine as an effect on the paint splatter layer, since i used your "set matte" the splatter doesn't get affected by the trapcode effect.

How to make audio (within a video) background music?

Hi: I have Adobe Premiere Elements 7.0. I have video of a guy singing that is three minutes long that I would like to use as the background music for a video montage. The video montage itself is about 3 minutes as well. I would like to start the video montage with the guy singing, then make the rest of the montage have just the background music of the guy singing (without the video of him). How can I do this? Thanks.

That's how I'd do it, too.
Another option might be to just plop the montage on Track 2 at the appropriate starting point and not do anything with Track 1 (the guy singing). The video from Track 2 would be used instead of the Track 1.
Not sure what would happen with the sound though - don't remember if Track 2 audio overlays Track 1 or if they get mixed
Also not sure what the OP wants... is the guy singing supposed to be "background" as in you can still hear the montage audio with the singing as light background, or whether the guy singing is the *only* audio.

Problem playing selected music with slideshow

Hi
I am having trouble playing music with slideshows since updating to iphoto 6. I can see all my playlists and I am able to select the playlist I want and this will play in the 'play music during slideshow' window. However, when I play the slideshow I receive an error message telling me that 'the music you have selected can't be found or can't be opened'.
This has only been a problem since updating and it doesn't matter what playlist I choose - they will all play in both iTunes and the selection screen for the slideshpw but not actually with the slideshow (the play music with slideshow box is ticked).
Any suggestions would be greatly appreciated as I am about to throw my mac out the window.

earnie82:
Welcome to the Apple Discussions. What version of Quicktime are you running? You should be at 7.1.5. If not update to it and give it another try.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Re: How do solve volume adjust problem on background music with voice

Similar Messages

Maybe you are looking for