Re: How I would make the Toshiba AC100 successful

Hi All,
I post my ideas for improvements here, maybe someone from Toshiba reads this.
The original blog post is here:
http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/
Please feel free to contribute here or at the blog post.
The AC100 is an early attempt from Toshiba to create an ARM based netbook (a smartbook) with Nvidia's successful Tegra2 chipset.
Although, the AC100 looks like proper hardware design, it became only
mildly successful. Some of the reasons may have to do with the primary
operating system, Android ([see my earlier article about this|http://soltesza.wordpress.com/2010/06/27/toshiba-a100-smartbook-with-android-but-why/]) but even more can be attributed to the design decisions Toshiba made.
Since these machines are now available in my home country (Hungary)
at quite attractive price points (~$250 USD, some people seem to be
trying to get rid of it soon after purchase) I can't help bumping into
it all the time. Sinc[View post|http://soltesza.wordpress.com/2011/05/09/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/]e
I am a gadget fan, I always have my hand trembling seeing those prices
and I need to cool myself down before doing some impulse-buy I regret
later.
What could make me click on the "Buy" button?
*More memory*
First of all, 1-2GB of RAM instead of the measly 512MB the AC100
hosts. Why the heck tried Toshiba sell a netbook with 512MB of RAM when
ALL of the Atom N450 netbooks seemed to come with 2 GB at that time?
This amount of RAM would allow to slap Ubuntu onto the machine and not
worry about running out of memory when loading up OpenOffice. Ubuntu has
been demonstrated on the AC100 and even looks snappy. (see this [site dedicated to Ubuntu on the AC100|http://tosh-ac100.wetpaint.com/]). Toshiba could easily put 2GB of RAM into the machine without major cost-increase.
*Desktop OS and/or Android*
Putting 1-2GB of RAM into the AC100 would open the gate for using a
proper, netbook-oriented desktop OS which can take advantage of the
form-factor. They should use Ubuntu, since that could be fixed up on
this hardware in no time (especially if they purchase some consultancy
from Canonical).
I don't think that Android needs to stay on the machine but if
Toshiba still thinks it is such a good idea for any user-group, they
could make the AC100 dual-boot, or even better, run both OSes in
parallel (2GB of RAM would make this absolutely possible). Android would
be the light-and-easy OS on the device but the user could any time
switch to a full Ubuntu desktop with an Android launcher icon and start
using OpenOffice or other decent desktop software. The
paravirtualization developed by B-labs would be an [instant solution |http://armdevices.net/2011/04/04/android-virtualization-on-ti-omap4-processors-dual-core-cortex-a9/]for this problem and would future proof the machine for a possible Windows8 scenario later.
*More battery*
The 8 hour runtime of the AC100 is decent enough but more
battery-time is always welcome. The enclosure has a LOT of free/empty
space under the keyboard due to the ultra-compact nature of Tegra2 and
its supporting circuitry. Toshiba should again take advantage of the
form-factor and add one or more extra battery docking bays under the
keyboard which could extend the runtime to 16-24 hours. (Admittedly,
they would make the unit weight much more but since these batteries
would be optional, this decision would be up to the user. A 24-hour
runtime with a 3-battery arrangement would make the AC100 extremely
appealing for a large-set of users. It would be acceptable that the
batteries are charged in series (so the recharge process is lengthier)
so that Toshiba doesn't have to switch to a more expensive power supply.
(Although the power supply issue is probably not a serious cost
factor).
*What else*
Of course, there would be a lot of things to be improved (more USB
ports, higher-resolution display...etc) but I tried to draw up things
which require smaller redesign so that an improved version could be
implemented faster.
I believe the AC100 line could be made really successful and Toshiba should take steps to make this happen.

hi there,
I'm new here and I need support from someone...
I buy notebook toshiba ac100 3 weeks before and I suffer major problem...
something happened with my screen , I press the power button and notebook is running /I can tell from turning on play-multimedia button for music and it plays music/ but the screen is not running !
I try many many things, like only on A/C , only on battery , pushing button for switch between screen and ext.monitor , but unfortunately - the screen was still black !
so I connect to flat tv with HDMI cable, and there you go - i have the screen ot the TV , but only there !
my question is this is problem with the screen or something I do wrong ?!
thank you in advance.
regards.

Similar Messages

My company has developed a computer peripheral that is not in the market. I would like to offer it to the Apple Stores. How do I make the approach? Thanks, D.C.

My company has developed a computer peripheral that is not in the market. I would like to offer it to the Apple Stores. How do I make the approach? Thanks, Dcaps

Apple corporate contacts are on their web page:
http://www.apple.com/contact/

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

How can I make the spry accordion remember the panel open when I refresh the page or jump to a new page?

How can I make the spry accordion remember the panel open
when I refresh the page or jump to a new page?
I am using the accordion feature on all my pages as a
navigation aid. It has three panels. When you refresh the page the
panel goes back to the default pane... Is there a way of
controlling this so that the browser can remember the pane that is
open (say set a variable, cookie, other?)

Look for "Set the default open panel" on the following page:
http://labs.adobe.com/technologies/spry/articles/accordion_overview/index.html
Keep in mind you would need to change that bit of code on
every page. The only way to do it more dynamically would be to
include a custom javascript or PHP/ASP style script in order to
change the value.

How much would be the monthly cost to host a small Linux instance in Azure?

Hello Guys,
I just wanted to ask how much would be the monthly cost of hosting a Small instance of Linux VM in Azure. I doubt this
detail has all the pricing parameters included. It’s just the VM itself it seems.
I know there is a pricing calculator but I’m not sure what parameters would be involved for this very basic instance. If you guys can give me an example calculation or at least point me to the basic parameters to include in the calculation, I will really appreciate
it.
FYI – these instances will be running a FreePBX system. I hope this helps to point out which parameters should be considered and included in the calculation.
Thank you very much,
Arnel

Hi Noctis0791,
Thanks for your feedback. As far as I know, Azure didn't support Provisioned IOPS. You could submit the feature request on custom wish (http://feedback.windowsazure.com/forums/217298-storage/suggestions/4900829-provisioned-iops
And about billing question, I suggest you could contact azure billing support team to get more detail.
Channel:
Please contact support team by creating a support ticket at http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Please try it.
Thanks
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can i make the end of a text higher than the rest in 3D?

I'm designing a 3D text for the outlet store of www.badkamermarkt.nl/ and would like to know how I can make the end of the text higher than the rest in 3D.

Hi,
Can you attach a comp of what you're trying to accomplish, instead of a live link to a commercial home page?
Are you wanting to make the country code of the url bigger like this?
regards,
steve

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

How can I make the sort default "by date" in iPhoto?

On one of my computers, every time I load an event, it goes to the top of the library and I have to go to "sort/by date" to get it to go to the end or bottom of the library...where I want it.
On my other computers, the default seems to be "by date" normally....
How can I make the default sort option "by date?"
Thanks.

I am not by that computer now. But that makes sense.
I combine events that are imported into that iPhoto. I suppose that would qualify as manually sorting....right?
Still, shouldn't there be a way to overide that and make "date" the default. That is, if your observation is correct.
(I'll take a look tomorrow....)
Thanks!!

How can I make the marker event pulse width longer in NI-FGEN?

I want to generate a marker event on PF0 line using NI-FGEN.I can set the marker event pulse width but when I was trying to make the pulse width units as 65 I was getting an error-1074115931.
How can I make the marker event pulse width longer without using script as I am using PXI-5412 which is not supporting Script.
Can anyone help me out in doing the same?

Unforunately, as you mentioned, the PXI-5412 does not support scripting mode. This will limit you to 1 marker using sequence mode. However, the PXI-5421 and PXI-5422 would allow the functionality.
As far as making the pulse width longer, and as the KnowledgeBase Article that you linked to discusses, I don't think it will be possible to create a marker as long as 1us - 10ms using just the Marker properties and without using scripting. You can still try to do this with property nodes and see if you can get a usable result. Start with an example such as "Fgen Arb Waveform Marker" and use the "Marker Position" value to set the start time (you would want 0 here it looks like), and then "Marker Event Pulse Width Value" to change the pulse length, but again I am afraid you will probably reach the maximum of 640 ns here. If you're not able to get this going with the property node, you will need either a FGEN card that supports scripting or another card that does Digital I/O to accomplish this.
Thanks!
Stephanie S.
Application Engineer
National Instruments

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

How can I make the current row in a different color in ADF Table 10.1.3

Hi all
in JDeveloper 10.1.3 ADF Table ,
How can I make the current row in a different color ?
thanks

And what exactly would "the component" be?
I tried the af:outputText, but it just creates a <span> around the value of the cell, and if I try the af:column it just won't use it at all!
Any suggestions?

How do I make the menu title a different color when it is the active menu in Spry horizontal menu?

How do I make the menu title a different color when it is the active menu in Spry horizontal menu?
Dreamweaver CS5.5
Apple OS X.6.8
View site at: http://dorsay-easton-indian-law.com/staging/index.html
Steps:
1. Click link to land on Home page
2. View Home link in Spry horizontal navigation menu
Actual:
Home menu title is the same color as all of the others.
Expected:
The title of the active menu is color: #FFC.
I was hoping that a:active would give me this functionality, but that's not how it is described. Any suggestions are welcome!

Nothing I have tried in the template makes the BODY tag editable. That's why I'm wondering how to disconnect the template from the individual pages. Adding an ID to each body tag is a prerequisite of the how-to page you supplied.
You don't make the <body> tag editable in a Template.
You make attributes of the <body> tag editable.
Don't disconnect the Template from the child pages.
Specify editable tag attributes in a template
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml
In the Template:
Select the <body> tag (either in the Tag selector or click inside the <body> tag in Code View)
Modify > Templates > Make Attribute Editable
Select ID from the Attribute dropdown menu
If there's no existing ID attribute then click Add and type ID into the next dialogue box
Attribute: ID
Check the box to "Make attribute editable"
Enter anything into the Label field as a default e.g. foo
OK
Dreamweaver will change the <body> tag to read <body id="@@(foo)@@"....
Now the ID is editable
Save the Template and update the child page
In each child page:
Modify > Template Properties
Select the id attribute from the list (it's probably the only one listed)
Change its name in the box to whatever name matches your CSS rule for the active state for that page
OK
Save
Upload

Re: How I would make the Toshiba AC100 successful

Similar Messages

Maybe you are looking for