Re: how to make bode plots in Labview 7.1 without using Control Toolbox

I am using Labview 10. I have connected a signal generator, a LP RC filter and an oscilloscope. I am using Labview in order to control the generator (sine with frequency sweep) and acquire the signal from the scope. I want to plot the Bode diagram without using the transfer function, from the amplitude of the sine signal and the frequency.  
Thank you very much.
Best Regards.

Hi pflo,
Are you using the CD Bode Plot VI or the SI Bode Plot VI?  For the CD plot you must use a transfer function.  Below, please find a link to an example on how to create a Bode plot without using the toolkit.  
https://decibel.ni.com/content/docs/DOC-14762
Regards,
Kira T

Similar Messages

  • How to make bode plots in Labview 7.1 without using Control Toolbox

    I'm trying to make a bode plots from transfer function using Labview 7.1. My installed labview not contains any toolbox, so I have to create the block diagram of bode plots my self. I have a problem when creating the phase bode plots for polinomial with conjugate roots pairs. Suppose the polinomial is ax^2+bx+c, with a,b,c is the polinomial coefficients. If b coefficients is negatif, i  have no problem, because the phase is start at 0, and the final value is 180. But if the b coefficient is positive, the phase plots starts at -180 and it's final value is 0. So, if there is any one who can helps me to give any solution, i'll really appreciate that. Or if there is any of you who had made the program to create the bode plots from a transfer function, i hope you can share the code with me. Thank you.

    Hey pflo,
    Are you using LabVIEW 7.1?  Can you explain the problem that you are having with the using the Bode Plot VI?  Below please find links to some documentation on the Control Design Toolkit.  With further information on your problem I will be able to better assist you with the toolkit.  
    http://zone.ni.com/devzone/cda/tut/p/id/3560
    http://zone.ni.com/reference/en-XX/help/372458B-01/lvsysid/bode_plot/
    Regards,
    Kira T

  • How to make a full backup of my iPad without using iTunes

    I need to make a full backup of my iPad.  I am using the Vudu app and have many movies downloaded to my iPad.  I have performed a backup of my iPad from iTunes onto my Macbook Pro.  The mobile backup files on my laptop are not nearly big enough for the 20+ movies (at lease 1/2 to1 GB each).   Because of this I do not believe iTunes has made a full backup including the movies.  I want to avoid having to re-download all the movies if/when the iPad drive fails.  I want a complete backup such as Time Machine or using some other external hard drive or app on my MacBook Pro.
    I bought a Seagate Wireless Plus 1TB Mobile Cloud Storage with Built-in WiFi Streaming (STCK1000100) external hard drive and installed the Seagate Media App.  I can, via the app on the iPad, see the device and copy to and from it.  But, it only allows access to music, movies in iTunes (not any movies in Vudu), and things like documents on my iPad.  It does not allow access to all the files inclding system files stored on the iPad.  I also tried another Seagate non wireless external drive that I connected directly to the iPad but the Seagate Media app does not communicate with or recognize the device from the iPad.
    I also bought DiskAid software that supposedly will make a complete backup of an App on a mobile device and installed it on my laptop.  I was able to make a complete backup of the Vudu app from the iPad onto my laptop, but in a test could not restore it to my iPad.  The backup file, though, was the right size, about 26 GB.  The DiskAid techs are looking into that.  I was able to use DiskAid to backup another app in a test (Hertz).  That app made a backup of the Hertz app onto my laptop, I deleted the app on my iPad, then I was able to restore it.  But right now the restore option is not working for Vudu.
    Another option would be to copy the movie files off of the iPad onto my Laptop, but the iPad does not appear in the finder window on the Laptop.
    I have about decided my MacBook Pro laptop will have to be the main repository for all the downloaded movies, since I can make a Time Machine backup of everything. 
    It is very frustrating to not be able to make a full backup of everything on my iPad.
    Anyone else have any ideas?   Apple - when are you going to provide a way to make a full backup of an iPad?

    I recommend Super Duper as well. I use it batch mode to automatically back up my iMAC every night at 2 am. It's saved my life a couple of times- once my disk crashed (under warranty)and what could have been a disaster (1000's of irreplaceable photos) was a 2 day inconvenience.
    Now and then I boot up from my backup on my firewire drive, wipe, check and reformat my internal hard disk, copy back all my files and I'm good to go

  • Make bode plot using Multisim connectivi​ty toolbox

    Hi
    I have bulid low and high pass filter in  Multisim and I would like to make bode plot in LabVIEW to demonstarte the functionality of these filters ( an interactive session for student to let them for example finding threshold voltage using bode plot garph)
    I use Multisim connectivity ver 1 to connect Multisim to LabVIEW.Would you please help me how can I work with AC Sweep function of this toolbox and is it possible to make bode plot using this function.
    Many thanks

    Hi there en99,
    Thanks for your post, I have had a look into this for you and have found the following information. In terms of using the Multisim connectivity kit, here is a good introduction of all the VIs an the roper ways to use the API functions.
    http://zone.ni.com/devzone/cda/tut/p/id/7785
    However, in terms of the Bode plot, this can only be done with the functions available in either the Sound and Vibration Module or, and more relevantly, the Control, Design and Simulation toolkit which are purchased separately. More information regarding this can be found at the following link:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/203​826
    More information can be found in the linked Discussion Forum that I found asking a very similar question.
    http://forums.ni.com/t5/Signal-Generators/how-to-m​ake-bode-plots-in-Labview-7-1-without-using-Contro​...
    Hope this helps!
    Liam A.
    National Instruments
    Applications Engineer

  • How to make PWM signals In Labview 7.1

    How to make PWM signals In Labview 7.1, Could someone give me .vi for examples. Thank you.

    There is a shipping example that shows PWM if you have installed
    NI-DAQmx.  You can open the example through Help >> Find
    Examples >> Hardware Input and Output >> DAQmx >>
    Control >> General PWM-Counter Output VI.
    Good luck!
    Micaela N
    National Instruments

  • How to make an index in InDesign CC 2014.1 using a topics list?

    Hi all,
    I have read the long help document on how to make an index in InDesign CC 2014.1 using a topics list, and still can't work out what to do.
    I have done a 548 page book, using a document for each chapter, and a book file to put them all together in the right order.
    I now need to make an index at the back, as the author has many quotes throughout the book at the start of each chapter and section.
    I have a list of those people quoted and want to upload this list and get the index feature in InDesign to find all instances of the name occurring in the entire book.
    After reading the help document I still cannot work out how to do this.
    My questions are:
    1. Do you have to use an InDesign document as a source for the list of topics? If so, should the document be added to the book file or outside it?
    It seems a bit recursive to have the list of topics in an ID document that is in the book file.
    2. Once you have uploaded the topics into the Index feature, how do you get it to look for all instances of that 'topic' througout the entire book? I can't figure that out from the help documents. What do I select? Do I do it from the Index panel? Do I highlight the text in the source document? Not sure how to do this...
    3. I need the names to list surname first of the quoted authors in the index. This command seems to be different between various editions of ID. For ID CC 2014.1 is it ctrl+alt+shift+]
    4. To make the surname show first, what do I highlight? The topic? and then do ctrl+alt+shift+] and select find all as well? Or do I have to just go through the text and manually do this and ditch the idea of uploading topics first?
    I am confused as you can see and any help with this is appreciated.

    Sorry 007, I really thought you were posting a trick question as on the OCP tests.
    Anyway, as Justin mentioned, if you have an index on ename, it may be used when doing a comparison predicate statement with the ename value.
    What it depends on are several other things: stats, how many rows in the table, use of an index hint, etc.
    Rather than questioning the group on this, why not just turn on autotrace and run the query for the different scenarios.
    The output will show you if it used the index, number of rows returned, blocks read, etc.
    SQL> create table emp (ename  varchar2(40));
    Table created.
    SQL> insert into emp select username from sys.dba_users;
    25 rows created.
    SQL> commit;
    Commit complete.
    SQL> set autotrace on
    SQL> select * from emp where ename != 'SYSTEM';
    Execution Plan
    Plan hash value: 2951343571
    | Id  | Operation        | Name      | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT |           |    24 |   528 |     1   (0)| 00:00:01 |
    |*  1 |  INDEX FULL SCAN | ENAME_IDX |    24 |   528 |     1   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       1 - filter("ENAME"<>'SYSTEM')As you can see, the above used an index, even though there were only 25 rows in the table.
    You can test each of your scenarios, one by one, including use of a hint.

  • Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

    Hey guyz can u help me out on how to make an apple ID on iPhone 4s without having a credit card information

    http://support.apple.com/kb/ht2534

  • How to make gprs connected in a whole day without ...

    How to make gprs connected in a whole day without opening any internet surfing application in nokia x6 (16gb)?
    please help me...or how to keep gprs connection for long time...without any application opened...

    Dinhorocks wrote:
    How to make gprs connected in a whole day without opening any internet surfing application in nokia x6 (16gb)?
    please help me...or how to keep gprs connection for long time...without any application opened...
    Yes.. you may follow what jimmyireland has suggested... but just for curiosity and if you do not mind... why would you need this ???

  • HT1414 my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .

    Hi ,
    my iPad did not came out the slide botton , how to make it back to normal , currently unable to used my ipad .
    History is my son try to enter too many time on wrong password .

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

    I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

    First, the app must be universal...designed for both iPhone/iPad:
    Tap App Store.
    Make sure you're signed in with the same Apple ID used for the original purchase.
    Tap Updates.
    Tap Purchased on the resulting screen.
    Locate the app in your Purchased tab.
    Tap the download icon.
    The app will begin downloading and you'll be taken back to your home screen.

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • How can i send an sms to any mobile without using gsm modem or mobile using

    how can i send an sms to any mobile without using gsm modem or mobile using oracle . note again. without using gsm mobile or modem. again note. i want to send sms 100% free sms. :) is it posible ?

    Hi,
    Check this one.
    http://www.oracle.com/technology/products/ias/portal/point/sms/installation.html
    regards,
    Dipankar.

  • How do i unlock my ipad2 (it is disabled) without using itunes

    how do I unlock my ipad2 (it is disabled) without using itunes

    You can't.
    Take it to an Apple Store as an alternative. Be sure to carry proof that it is indeed yours and not pilfered from someone.

  • How can you build time series measures in OBIEE without using TODATE AGO fu

    How can you build time series measures in OBIEE without using TODATE and AGO function?
    Please provide steps to build time series
    measures in OBIEE without using TODATE and
    AGO function. Dashboard results not storing
    in cache when using TODATE and AGO functions.
    eventhough its cached users queries not
    hitting cache because queries doesn't match
    exact date time when using TODATE and AGO
    functions. so I want to build queries using
    sysdate and some simple calculations. Please
    send your inputs/ideas for my questions..
    Thanks in Advance

    This can be using Msum function in answers. Use the following formula, here dollars is my metric. Change the formula based on your metric.
    Msum("Sales Measures".Dollars ,2) - "Sales Measures".Dollars
    the report will be cached and better performed compared with time series. check ti
    - Madan Thota

  • How to invoke the app by touching the screen (without using the home button)

    Kindly  provide the solutions for the following issues
    1.       How to invoke the app by touching the screen (without using the home button)
    2.       Estimated lifespan running an iPad3 continuously 24x7
    awaiting for your valuable response.
    Thanks and regards,
    Sathya.

    1.  You can only invoke an app by touching its icon.
    2.  All depends on what your app does.

Maybe you are looking for

  • Sales order item level deliveryblock based on the material's destin country

    Hi Experts I have a requirement to set delivery block to an order at the item level based on of country of destination and material. -Requirement is to block automatically order line when a material is not authorized (Regulatory affair) to be shipped

  • PSE7 Organizer has encountered a problem and needs to close

    Help, I keep getting this message that the Organizer needs to close (Digital Product ID which could identify your licence and internet protocol ) after every thing I do in the edit photos .!!!( send error roport) has any one got any answers please?

  • How to create Decision Node in Data Flow diagram under Process Model

    Hi, I am starting a new project and would like to use Oracle Data Modeler for my data flow diagrams and logical/relational diagrams. Could you please guide me how can I ask Decision question in data flow diagram. Ideallly i would like to create a Dec

  • EDI over FTP

    Hi Ramesh, We are facing some initial hiccups on b2b, it would be helpful if you can clear it. The scenario: We get multiple EDI docs from multiple partners through FTP, but the rule is to process only those files which have an associated ".done" fil

  • Pivot layout in apex.

    Hi in my application i have a requirement as follows 1) column 1 indicator 2) column 2 important. and the other columns are target actual and current year, previous year and next year. the layout should be in pivot table lay out as follows here the t