Re: HP7610 won't print 11X17 BORDERLESS

I have followed the instructions to print borderless on 11x17 from two software platforms: Acrobat X and Revit 2015. Each time, a portion of the page is printed, then "print cancelled" displays on the printer display and the page comes out half-done and the printer keeps printing half-done pages until I take the paper out and cancel the print.
Thanks!

Hi @padgemi,
Welcome to the HP Forums!
I see that you cannot print borderless on 11 x 17 size paper with your HP Officejet 7610 printer. I am happy to help!
Question for you: What Operating System are you using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
In the meantime, I would suggest going to this post, Re: HP7610 won't print 11X17 BORDERLESS, by my colleague @Sunshyn2005.
Hope this helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Deskjet 3050 Won't Print Wirelessly

Hi there,
My new all in one 3050 won't print for me. It is "Offline" in the network page. I feel I have explored every avenue and it will still not print. The wireless network configuration page I printed says everything passed. The home network disagnostic tool says "software missing" after i click test connection. The print diagnostic tool fails on connectivity everytime. I can connect to the printer ip 192.168.1.3 in the browser 95% of the time but not always. My router is a Zyxel P-660HW-T1 v3. I'm really close to tears with frustration, I'm quite computer and networking savvy but I cannot fix this. please help, I'd be eternally grateful.
Kind Regards,
Larry.

Hello dkkenny1,
Are you running Windows on your computer? If so, I recommend running the HP Print and Scan Doctor. This tool provides a quick and easy way to diagnose and resolve many printing, scanning, and connectivity problems. Click the link below for details on how to download and run this tool:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&lc=en&cc=us&dlc=en&product=4066452
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Officejet Pro 8100 Everything fine; Just won't print

HP Officejet Pro 8100 working on a Windows 8 PC
I like this printer, had it for a few months, worked fine at the start. For more than a week now, it just won't print. Troubleshooting reveals no problems with set-up or anyhing. No error messages. Files go to the printer, listed on the queu, but nothing happens thereafter. Help!

This solution was created to address the issue you've described.
Print jobs stuck in queue / No response
I am an HP employee.

Remote laptop won't print to new HP4622 wireless printer

My new HP 4622 won't print from wife's laptop (Compaq Presario CQ-60-224NR w/ Windows Vista) in another part of the house on my home Centurylink DSL network with very good connectivity. I have the printer installed at my desktop (Gateway Microsoft XP SP3) and it prints fine from the desktop. Does the printer software also need to be installed on the laptop? I sent a .jpg file to the printer from the laptop and it printed one line of unicode? code per page until I cancelled the job from the print queue. I have gone thru the installation guide a couple of times and nothing is fixed. Test results say that everything passed and install is successful. I downloaded and tried the print doctor wizard and it says no problems found. I have McAfee total protection running, could there be a firewall problem? I'm not sure about enabling ports or that sort of thing. I dumped a perfectly good Lexmark X7170 all-in-one because it wasn't wireless and we couldn't get it configured to print peer-to-peer. Now I have a new wireless printer and con't get to print remotely either. Hope you can help. Let me know if you need more info. Thanks.
This question was solved.
View Solution.

Hi Ken,
I would recommend giving the printer a static IP address for the wireless connection (not USB):
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your computer. Do it this way:
0. Go to Start > Control Panel > Devices & Printers and delete all instances of the printer.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
If you're still experiencing issues try changing the channel on your router to 11 and the encyption to WPA.
Say "Thanks" by clicking the blue Kudos star in the post that helped you.

Report won't print to the end of width in Oracle E-Business Suite

Hello all,
I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end of page width. It always cut the print in about 3/4 of page width. I already setup the report as a text and pdf but still no success. Enlarge the width and height of the report won't help either. Anyone can suggest something to help? Thanks.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Won't print to photo tray, but will print test page

I have most current Vista driver, but can't print to photo tray. It won't pull the tray in, although it works great when printing test page. I tried various page/paper settings and "photo tray" light settings, but still won't print from Vista.
Tried 8250 printer properties, changing paper settings, but can't recognize settings, even though it sees the paper and prints the test page. Seemed to work just fine with XP.
This question was solved.
View Solution.

Plugged into an XP machine, photo printed.
Plugged back into Vista, fooled with the settings, then it worked!
I don't know what exactly fixed it...

IPad won't print to hp with AirPrint, was working fine earlier!

My hp printer worth AirPrint isn't printing from my iPad and iPhone. Has been working fine until tonight.
I have rebooted the router, printers, ipad2 and the iPhone. Still won't print.

Try restarting your wireless router by removing power to it for 30 seconds and restarting.
On your iPad go to Settings > General > Reset > Reset network settings.
Now try to connect.

Macbook won't print to lexmark z600 anymore

i cancelled a job the other day as a noticed a mistake. ever since then, my MB won't print. in the printer display it says job stopped. i clicked start, but nothing happens. when i connect to my printer at home i have no problem. whats going on?

nope ive tried restarting, reinstalling drivers, ive even deleted and re-added printers. still nothing. the macbook sees the printer, it even processes the job. but there is some kind of jam up in th printing queue. i delete all items in the queue, try again. still nothing.

Mavericks won't print to Xerox Phaser 6300.

Mavericks has my printer in the list of available devices, but tells me that the printer is not connected and won't print. Xerox only has updates to Mountain Line in their driver downloads.
Anyone else having a similar problem?

Update:
Checked the printer Settings to confirm the Printer's address. When I use the Setting to check the Wi-Fi Settings, I get a message saying "This computer appears to have a working Internet connection, but can't find Phaser 6300DN (00L00:aa:95:47:31).printer._tcp.local. You may have typed the address incorrectly.
The address is 00:00:aa:95:47:31 so I don't know where all the parenthetical data is coming from.
The network setting seems to be at the heart of the issue, but I'm not sure how to resolve them.

Imac won't print to epson 1270

My imac won't print, stating that there is not enough RAM.
It is running 640mb, 100% of which is available to Photoshop.
This happens to both the 1270 and my R200. the OS is 10.3.9.
My ibook is more than happy to print to both printers despite only having 128mb of Ram!
Any ideas?
Thanks
Gari
G3 ibook/OS10.2.7, G3 imac/OS10.3.9 Mac OS X (10.3.9)

You're Welcome Gari!
The driver on the disc may be outdated. Did you uninstall the older driver before trying to install the newer, downloaded one?
If nothing else resolves the problem, and you need help doing that, I can post the instructions.
"...stating that there is not enough RAM."
OS X uses Dynamic Memory Allocation, so I am puzzled that you are getting that message.
What is the exact error message?
How much of the RAM is original, and how much is added?
Is Classic running when you are trying to print?
Do the printers function from any applications, other than Photoshop?
You can also use Rember to test your RAM.
"My ibook is more than happy to print to both printers..."
Are you printing from Photoshop with the iBook?
Have you deleted the printers from the Printer List in Printer Setup Utility, and then re-added them?
Have you trashed the printer & Photoshop pref files from:
HD > Users > Your Account > Library > Preferences: HERE?
Sorry for all of the questions. I'm just trying to explore all of the possibilities, to get a better understanding of the situation.
ali b

X61 won't print to HP Laserjet 5200tn

Hello. I work in a college. A user wants to print to the 5200tn next to his office but cannot with his new X61 tablet. We tested other computers and they print fine to this printer, but in testing another X61 tablet no prints would be produced. Pinging the printer is fine from the tablets, the install of the printer goes fine, drivers are updated, so it appears everything is o.k. but for some reason X61 tablets won't print to a Laserjet 5200tn in our network.
Any ideas?

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Re: HP7610 won't print 11X17 BORDERLESS

Similar Messages

Maybe you are looking for