Re: Importing of Roland Fantom-S sounds

Hello, complete noob here with a lame question.
Can I import my extra-sweet sounds that were dearly paid for and dutifully placed on my Fantom-S years ago and put them in a place usable by Logic Pro? Does this question make any sense? I had a PC-based system that couldn't handle this at all, and my songs had to use their weak sounds instead of the rich textured instrumental sounds I paid for so dearly...
What are my options - any ideas?

No, you cannot export the sounds and it's not legal to do so anyway.
If you were going to do it, you'd have to either resample the source samples and build you're own EXS instruments for them (a lot of work), or resample the full patches as described above. In either case, Roland & Spectrasonics forbids you from doing this, even if it's for your own use.
Basically - you can't do it easily.
Otherwise, you'll need a tool like Redmatica's Autosampler to multisample each note and dynamic layer - this will automate the process as much as you can, but it's still a very large task....

Similar Messages

Getting AUDIO to come out of Roland Fantom XR in Logic 8

Hi. I am currently running Logic 8.
I have my computer hooked up via USB to the Roland Fantom-XR sound module.
I can get the computer to recognize the Fantom as a GM device. I can see the blinking lights go off on the Fantom when I press my controller, But I hear no audio coming out of my speakers and the speakers are playing other Logic events in the Arrange window just fine.
The question I guess I have is WHERE is the environment supposed to be set up in this scenario? Has anyone experience this problem?
cheers to you all....

Hi,
How have you routed the physical out(s) of the Fantom to the speakers? What are the speakers connected to? Do you use an audio interface?
regards, Erik.

Roland Fantom G8 to logic?

Hi there all together
I'm in serious trouble with my roland fantom g8. I linked it to my iMac via USB-Midi Cable and USB (fantom is said to be working like this). I also plugged in a line out from the fantom which goes into the audio input of the Mac.
Now, I'm still to stupid. Hitting the capslock I get sound from the fantom, but there's absolutely no midi transmission when I hit the keys of the fantom.
I made the environment as said in ninja's youtube-video:
Physical output to keys (incoming notes) to "showing notes" to sequenzer. Is there anything else I should do? In the physical output are the usb-midi-cable as well as the fantom. I changed the settings in the mac's in- and output as well.
Please help!
Kind regards from a helpless woman in Switzerland...
Adlerherz

You should never have to set up anything other than your usb connection from your fantom g8 to your imac. I have read posts on this forum where some members are responding to other members questions with the wrong information. The usb on the fantom G8 WILL transmit both audio and midi into an application. You may want to use an external sound device if your not satisfied with the quality of the recordings using the imac hardware, but that is another issue all together. I record HD audio (24/96) all the time directly from my fantom into my host application. That includes midi as well. Thought you might like to know....
David

How do I get signal from my Roland Fantom G8 to Logic Studio or GarageBand?

My computer recently crashed, and since then I have not been able to record any music into either Logic Studio or GarageBand. I need to get back up and running ASAP, as I'm in the middle of recording music for 5 different projects. Here's all the gear that I have:
-1 Roland Fantom G8
-1 iMac with Logic Studio and GarageBand
-1 M-Audio Fast Track Ultra
-2 Rokit KRK Monitors
-1 USB cable
-1 midi cable
-2 1/4-inch cables
-2 1/4-in to XLR cables
The 2 1/4-inch cables run from Balanced Outputs 1 and 2 on the back on the Fantom G8 into Inputs 1 and 2 on the back of the Fast Track Ultra. The 2 1/4-inch to XLR cables run from the back of the 2 KRK monitors into Outputs 1 and 2 on the back of the Fast Track Ultra. The Fast Track Ultra is powered via USB cable that runs into a USB port on the back of my iMac. The midi cable runs from the "Computer" port on the back of the Fantom G8 into a USB port on the back of my iMac. This is the exact set-up I had before my computer crashed, and I was able to record just fine. When I open up the audio preferences on either Logic Studio or GarageBand now, it recognizes the Fast Track Ultra; however, it does not recognize the Fantom G8. What I'm trying to do is get signal from my Fantom G8 into both Logic Studio and GarageBand. I also want that sound to then project through my KRK monitors. I also want to be able to record audio and midi. Please help me!!!

I used the Fantom for several years and did exactly what you want to do. I simply plugged my Fantom into a channel on my mixer, in your case the 003. I ran a firewire out of my mixer (Presonus Studio Live) into my computer using Logic Pro X. Then I just assigned that incoming channel to a channel strip in Logic. As an example I used stero channel 9/10 on my mixer, (plugged in the Fantom here). Then the signal went via my mixer firewire to computer running Logic. I assigned my channel strip input to channel 9/10.
Does this make sense?
I just sold my Fantom last week and purchased a new Yamaha Motif XF8. Now I am trying to figure out the same thing on it.

When pressing record it triggers a note on my roland fantom keyboard

Equipment: Macbook Pro 13", Roland Fantom g8, m audio project mix
Hi, i know this is probably a simple fix but I am having some problems while trying to record my external midi. Every time i press record it will play a low note with a sound coming from the 2nd channel on the fantom. Sometimes it will continuously play that specific note and i cant turn it off. For the mean time i have been muting the channel on the keyboard but i want to know why it is doing that.If anyone has any pointers that would be awesome.
Thank you, Brian T.

Check your metronome settings. Sounds like Logic is sending a midi click out on midi channel 2 to your keyboard. Disable it and just use the built in click.

RECORDING AUDIO through ROLAND FANTOM G8 on LOGIC PRO

Guys, I have been struggling for days, with such a ridiculously simple issue. I need to be able to record audio through my mic which is connected through my Roland Fantom G8 on one audio track in Logic, while simultaneously hearing the beat on another audio track through my computer's built-in output. Garageband does this automatically.
When I set the core audio input to the Roland Fantom, I can record just fine, but then I cannot hear the beat play through the computer's output. If I set the core audio input to built-in input, then I can hear the beat through the computer, but Logic does not detect my mic.
The program detects the Roland without me setting the core audio input to Roland Fantom, as I can record sounds on a midi track while simultaneously hearing the beat on an audio track. So why can I not record my vocals through the Roland on one audio track and simultaneously hear the beat on another audio track through the computer's output?
Somebody please let me know ASAP because I need to get this album of mine under way. It would be GREATLY appreciated.

It's quite common - people who are used to using entry-level tools don't necessarily realise that the software is designed to do a certain amount of hand-holding.
When moving to a professional program, people somehow think that the new program will do everything the entry-level one did and more, but everything will be even easier.
However, professional software is designed specifically to not do any hand-holding. It's assumed that people using professional software have a certain amount of skills. The software is designed to help them realise what they want, rather than constrain them in "easy-mode".
In short, it doesn't hold your hand, it doesn't tell you when to go to bed, and it won't look all dissapproving when you turn up the following morning with a hangover and half your clothes missing.
The trouble with having the pro stuff so accessible is a lot of people who are really at the level of using entry-level programs are using the pro stuff simply because they can - and then they get frustrated because these programs require some knowledge to use effectively.
Sit someone in front of Maya or After Effects (as an example) who has very little knowledge or experience, and they won't get far. And the software is not going to try to educate them.
And we see this with Logic Pro 8 like never before, as a lot of new users have come on board, whether because the price point or value is so attractive, or because LP8 is accessible in a way LP7 and before wasn't.
(Note, this is a general thing, not necessarily applied to the OP here...)

Logic Pro 8 and Roland Fantom G 8

Hi there fellow musicians!
I have a great wish to control my setup using Roland Fantom G8 keyboard.
Here is what I have,what I want to do and what issues I have with it:
I have Fantom G connected to Logic 8 on my MacBook via usb,
then midi out from Fantom through standard midi cable, connected to M-Audio Audiophile USB interface on my slave PC.
I use audio routing from PC back to Logic through ethernet cable (audioport)
I would like to record Midi (played on Fantom as a masterkeyboard through usb midi) on Logic, then get the midi that's been recorded to Fantom MIDI OUT so i can play all the stuff on my PC.
Well...its supposed to be simple but **** it isn't.
I get all sort of issues with it, first of all,
how to switch between external channels of Fantom, so I would send just one channel signal to logic, not all channels.
Then I dont know how to set up the midi tracks in Logic, so they could record midi from the certain midi channel and then transmit it to my pc using midi out of my Fantom.
I tried many things really,but cant get it right.
I guess the problem lies somewhere in Fantom. What I want is just simply 16 different midi channels to go through fantom midi out to pc and also want to be able to record midi on logic using roland's usb as a midi device for the logic's midi input.
Hope I was clear enough to explain what am I struggling with and...please,please help me. You are my only hope
Cheers,
Kuba

Well i hope my explanation helps to solve you your provlem.
Firstly, Cheer up......cos ur gonna get away wid the problem wid dis........
Lets start.......
1. Install all the softwares that came with Fantom G6 ( Fantom G drivers & Fantom g editor).
2. Connect your Fantom G via usb to ur Macbook.
3. Launch Logic. It will search for all the available audio units (including FantomG).
4. Start Logic with empty project. Create a new external midi track.(I hope u kno how to create external midi track. (If not then check out Logic's manual).
5. Now at this point if everything goes well, then you may see that logic created a track named grand piano. On the right hand side you can see in library tabs that GM device first track is selected. Now u should see Fantom G there right above the GM device on the first place. Click on that & click on channel 1. Now you should see that your track name is changed to Prg 0=11.
6. If u did this much correct. you are done & you are finished with the tough part....:) cheers.
7. Now On fantom G click on studio mode. Now you are on internal mixer of fantom g. Select any instrument u wanna select..on the first channel (by default it shows G-grand) you can select any instrument.
8. Here is something important......now since you wanna record midi on Logic which is an external sequencer you will have to move to external mixer on fantom g. To do this you have to click F8 twice on fantom g. That will take you to external mixer
9. Select channel 1 on fantom g. Now go to Logic. & hit record (R)......Now you'll be able to record midi to Logic & u may see data entered in Logic's sequencer...........:)
10. Likewise you may build your song by creating new tracks just the way you created this one & selecting different songs.......
I hope this helped........
Any further problems........you're most welcome...:)

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??

hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Digital I/O question for LP 7.1.1 w/Mbox2 and Roland Fantom XR

Hi guys,
I'm a little in the fog here.
For the first time, I'm trying spdif OUT from my Roland XR sound module, to the spdif IN on my Mbox2 (firmware v1.24), to Logic Pro 7.1.1 on my Mac via the USB interface on my Mbox2. I would have thought this was simple.
[I bought this setup last October, and analog has always been no problem. Now I'm trying digital for the first time.]
Anyway, no audio is getting into Logic (I record enabled a track).
So to troubleshoot, I simply plugged some headphones into the mbox headphone output to see if it was even getting to, and out, of the mbox from the sound module. Audio isn't even showing up there. I'm looping the demo songs in the sound module so audio is constantly playing. I check the headphone output on the sound module and of course there's the audio, playing away.
FYI, Mbox 2 system preference on my mac is ridiculously absent of options. I can set my clock to internal or spdif. If I set it to spdif, sure enough, the spdif light on the front of the Mbox lights up, AND only when the sound module is on and connected. But none of this has helped my problem.
Does anyone know what I'm missing here?
Thank you to anyone who can help!
Aaron

Aaron, I use a Fantom XR SPDIF output to record. The
thing you must remember is the XR's SPDIF will have
to be the Master Clock reference for Logic otherwise
you will get clicks and pops!
Check the settings in the Audio/MIDI setup under OSX.
You will need to set the Mbox2 as the master clock as
this is receiving the SPDIF input. Hopefully the Mbox
will detect SPDIF and accept that as Master.
Restart Logic and ensure you have sample rate set to
44.1Khz as that is what the frequency of SPDIF is.
I'm aware that this may sound complicated but at the
end of the day if you record from a SPDIF source, it
has to be the master clock for Logic.
Good luck, Rik.
Rik, I was wonder how this would work. When I tried to use
SPDIF with my Mbox1, I could never get Logic to see the
input. I am not sure it was supported. But I can use my
Saffire's SPDIF but I have never set it up as master. When
you mentioned it had to be the master clock, I went into Logic
to see if it showed up as a choice. For syncing Logic only has
choices for
internal
midi clock
MTC
Manual
which one should I use to make the interface the master?
Logic only mentions listening for MMC.
Thanks

Importing to I-Movie - lost sound AND video

Hi.
I have a feeling this has already been answered but here goes:
I recorded some video on my Sony still camera in MPEG format (.mpg files). They worked fine in I-photo. When I imported them into Imovie though, I not only lost sound but it would seem vision. They are now .mov files but don't play?
The scroller moves, but the picture doesn't change, it just zooms in on the first frame (like a slide show) and there's no sound.
I am not very techie, and new to Macs. Can anyone please tell me how to solve this, and have I lost the content on the files I transferred into IMovie?
I transferred them into Imovie so I could compress them for web use on my blog.
I have already downloaded Streamclip in case I need that, though I don't know if I have to open/mount/unzip it or anything like that.
Many thanks in advance for any assistance.

Hi, sorry for the delay in coming back to you.
Right, since we spoke I met a guy who said:
Streamclip WILL be enough for me and it will work. He said my camera will be using MPEG-1 and so I will be fine. If I had an MPEG-2 (professional?) camera it would be more complex and I would need to buy that Apple component.
So I downloaded it. The next step will be learning how to use it! That's going to be a whole different ballgame. If you have any links to an easy step-by-step guide, that would be awesome? RE the external drive, I'm downloading my MPEG's via USB cable onto the hard drive before I do anything at all.
Thanks for your post

No audio in Muse when I import an Edge file with sound

I'm using an Edge animation with sound effects in Muse.
In Edge all audio is playing but when I import the .oam in Muse there is no audio.
Any Suggestions?
Thanks!

Problem solved, local sounds don't work for muse. Moving the sounds folder an external url did the trick..

Importing From Min-DV Camcorder: Sound on One Clip, not the Other

Hello,
Taped a live presentation on Canon HV 20. Part of the way through, briefly stopped then re-started camera. After importing to iMovie 6, the 16 minute clip 'pre-break' has no sound on playback, although it had sound in 'monitor mode' and on the tape. The 22 minute post break footage plays sound just fine.
Thanks,
DoubleJD2

Here you go. I don't know exactly what I did to make the timeline clips disappear, but I was trying to find the effects clip and that's how it happened. I know I used the relink project files option to do so, and after that I couldn't find anything. I've checked everything and everywhere including trash, but nada!

Clip imported into iMovie has no sound

I have recently upgraded from Snow Leopard to Lion (actually had to have a fresh OS Lion install at Apple Store and restore from Time Machine). I have imported three clips from my Sony DCR DVD-201 camcorder but they have no sound. The clips play fine, except for the lack of sound. Wondering if I should go into the Movie folder and delete the events and try to import again. Found a few posts about this problem on the web, but no apparent solutions (except deleting iMovie and reinstalling and then not updating with the latest update). Wondering if the experts on this thread have any ideas.
Using an iMac (late 2010) running Lion (10.7.4), and iMovie 11 (9.0.6).
Thanks.

First: We did switch to MPEGStreamClip with the same result - No sound in iMovie.
Second: Thanks for your recommendation of MPEGStreamClip over HandBrake. However, HandBrake has been completely satisfactory for the last 5 years. Just not this time. I think the problem is not HB but something Apple. My local Cafe Mac techs say they have seen the no sound situation before and have been able to correct it by using an earlier version of iMovie. However, I did use iMovie '08. An upgrade to iMovie '11 didn't help.
Thanks for replying to my inquiry.

Music of imported pps files doesn't sound on Keynote

I got Keynote on my Ipad, and when I import pps files, its music doesn't sound. It's very strange because the same file, I open it in powerpoint in my mac and it works fine, the musics perfect. So what's the problem? Can i do something on my mac to get this pps file to work with music on my iPad keynote?
thank you

How could I NOT import them? Appointments I do "by hand" show up immediately on the other devices. The imported appointments show up after modification.

Re: Importing of Roland Fantom-S sounds

Similar Messages

Maybe you are looking for