Re-install b/c of database corruption

I have a small SCCM 2012 deployment where the SQL database has become corrupt (suspect) and I am unable to repair it. All of my backups have been over written so I don't have a backup to restore from either. I am looking at having to re-install everything
and am looking for guidance on the best way to approach this. I was thinking of uninstalling SCCM and SQL 2008 R2, then re-install everything and use the same SMS Site name. Would this work or is there a better way to go about it?
Thank you.
Greg

Hi,
Please make sure the content of the System Management container in AD have been cleaned up. You might also have to delete
the DNS records (if DNS publishing was enabled).
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Problems installing cs3 production premium: database corrupt

I have a new computer with windows 8.
On my old computer i used Premiere Pro CS3, now i tried Premiere Elements 11. I´m not happy with it so i deinstalled it and tried to install the CS3 production premium on the new Computer.
When I insert the disk and click on install an error appers immediately: "The installation database is corrupt."
I found out that there is an "Creative Suite Cleaner Tool" so i used it, but this doesnt resolve my error.
What do I have to do to install the CS3 Production Premium?
Oliver

Manually delete the caps.db in the caps folder:
Important Directories
Bob does have a point, though. Installing and using CS3 on Win8 is going to be all sorts of trouble, regardless.
Mylenium

Trying to install Photo Shop CS3 Extended on Windows 8 and keep getting database corrupted

Hi, I am trying to install my Adobe Photoshop CS3 Extended on my new Windows 8 OS 64 Bit computer. The CD does not have a scratch on it, it is like new. I get the error database is corrupted. Contact Adobe Support.
I went to the Adobe website and downloaded the updated installer, same error. I tried running the installer in Windows XP compatibility mode, it looks like it installed, but when I run I get database corrupted.
I could really use some help.

Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

Solaris 10 x86 package database corruption

After installing Solaris 10 3/05 s10_74L2a X86 (version as described in /etc/release) I find that the package database file /var/sad/install/contents appears to be corrupt.
If I do a "pkginfo -l <package name>" command to view the details of a package I get an error like this:
pkginfo -l SUNWaccr
pkginfo: ERROR: bad entry read in contents file
pathname: /usr/apache/tomcat/webapps/tomcat-docs/servletapi/javax/servlet/ServletRequest.html
problem: unable to read content info
If I add a package, say from the Companion CD, it to gives the error.
I cannot remove packages either.
I have re-installed and tried the pkginfo command immediately - without adding any packages.
Anybody experienced this?

what's your DHCP server configuration?
type dhtadm -P and that will print the configuration of the dhcp table and all your macros.
On another note, I also have a blade server (3Up CMU-4) that has USB keyboard and mouse, even if the interface is PS/2 (converted internally to USB). Solaris will not recognize the keyboard and mouse when installing or booting, but after the kernel is loaded I can use them OK. I do get the keyboard profile error and I think it is related to the fact that there is no PS/2 k/m enabled. The only way that I found that I could use the mouse in the graphical interface was to use a USB keyboard with a hub and connect a USB mouse to the keyboard, Anybody has any explanation for this behavior?
Max

CS4 Web Premium Installation "Installer Database Corrupt. Contact Adobe Customer Service."

I need help.
I just purchased a HP Envy 23 running Windows 8. It came with Adobe Premiere and Elements 11 already installed.
I own Lightroom 3, which I installed very quickly and easily.
I own CS4 Web Premium with the serial number at hand. I insert the disk 1 to install and the error message appears: "Installer Database Corrupt. Contact Adobe Customer Service." After serveral attempts, I resort to researching on this forum.
In the forum, found here: http://forums.adobe.com/thread/1238032 I was asked to go the linked website and download and specifically follow the instructions to install CS4 from the internet. I did what I was told as closely as possible.
I received the same error message: "Installer Database Corrupt."
I asked if I needed to uninstall Elements 11 before trying to install CS4 but haven't received a response. Actually, now Adobe won't let me sign on with my password and when I request for a new one it doesn't send me a confirmation email so I have resorted to making a new username.
I called Adobe about the issue with the error and was directed back here to the forum because they do not have phone service support for CS2, CS3, CS4, or CS5 because it is "old" technology. I am loosing lots of work time because I can't seem to get a quick response to my questions here on the forum.
I found another forum saying that I need to rename the file "caps.db." to "xcaps.db" and it will install just fine. I did what it said, looking for any and every folder in both premiere and elements to rename anything that began with "caps" After doing so, I still got the error message.
What I need to know is:
1. How can I install CS4 Web Premium either by disk or internet without getting an error.
2. Must I totally uninstall Elements and Premiere to get CS4 installed? I really don't want to do that since I paid for them with the purchase of my computer.
I'd really like some answers. Thanks.

You're going to need to be more specific about what I am supposed to do because I'm very unfamiliar with computer lingo. I don't know what an OEM is and I am unsure about these backup disks you are referring to. The expertise on this forum is the only lifeline I have to fixing this Adobe issue so I really want to try my best here to get things resolved. I've not heard of deleting caps.db and haven't heard of anything to do with medai.db files before. I'm supposed to delete these instead of renaming caps?

E63 Media Database corruption

On opening Media->Gallery, I always get a annoying message that "Database corrupted: Some data might have been lost".
I don't store any songs/video there. Only once used camera.
Will camera corrupts media database while storing images ?
I use latest firmware 200.21.012. I have installed following applications Nokia maps, Google Search and Google maps. When those applications where installed in memory card, I used to get error like "Memory card corrupted". Now, I reinstalled them into phone memory.
Anyone knows solution for this ? I am planning to try soft reset after backing data.

Just don't install programs or applications on the memorycard. Insert the card IN the phone and NOT on a PC or Mac to format. Remove the card by pressing the red button and choose remove card from the dialog option. If you insert the card later you should hear a short bleep.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Installer Database Corrupt Error

I'm trying to install CS4 Design Premium on my Windows 8 desktop. I keep getting a "Installer Database is corrupt" error. Help!

http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html

Directory Server 6.2 - Possible Database Corruption

We have become aware of a bug in Directory Server 6.2 only that could cause database corruption. We have a hotfix for this issue, and if you are running Directory Server 6.2 and run into this problem then you should contact Sun Support and ask for the fix for the following bug
6642430: DB corruption (zero’d pages) when performing db2ldif against large 20GB ldif file.
The sunsolve record for this bug can be found at [http://sunsolve.sun.com/search/document.do?assetkey=1-1-6642430-1].
NOTE: This issue does not affect Directory Server 6.0 or 6.1 release so you only need this fix if you are running Directory Server 6.2.
After you have the hotfix for this issue on Directory Server 6.2 and have applied the hotfix, then you will have to re-initialize the database from an LDIF backup to fully correct the corruption issue. Simply applying the hotfix will not fix the database if the database is already corrupted. Database corruption can be present though not detected with data in binary formats. You must therefore rebuild the database by importing an LDIF backup.
Directory Server Enterprise Edition 6.2 is no longer available for download and Directory Server Enterprise Edition 6.3, which includes a fix for this issue, will be available for download early April. When upgrading to Directory Server 6.3 from 6.2 (not needed if you are on 6.0 or 6.1), make sure you export the database (db2ldif) prior to the upgrade and then re-import the database after the upgrade to fully re-initialize the database and to ensure that no corruption issues remain.
Recommended patch or upgrade procedures:
<ol><li>     Shut down each directory server instance, as described in [Starting, Stopping, and Restarting a Directory Server Instance|http://docs.sun.com/app/docs/doc/820-2491/6ne3dhd8u?a=view#bcaan].
</li>
<li>     Perform an LDIF export of the database, as described in [Backing Up to LDIF|http://docs.sun.com/app/docs/doc/820-2491/6ne3dhdio?a=view#ganwh].
</li>
<li>     Install the [hotfix for bug 6642430|http://sunsolve.sun.com/search/document.do?assetkey=1-1-6642430-1] on Directory Server 6.2, or upgrade your Directory Server 6.2 instance to Directory Server 6.3 once Directory Server 6.3 is available for download (early April). You will need to login to Sunsolve in order to
     see this bug description.
</li>
<li>     Re-initialize the database from the LDIF exported in step 2, as described in [Importing Data From an LDIF File|http://docs.sun.com/app/docs/doc/820-2491/6ne3dhdj4?a=view#ganwc].
     If you are running replicated instances of Directory Server, make sure you read [Restoring Replicated Suffixes|http://docs.sun.com/app/docs/doc/820-2491/6ne3dhdjc?a=view#bcajf] as well.
</li>
</ol>
Edited by: KevinLeMay on Mar 28, 2008 4:48 AM

The entry was not imported most likely because it's parent isn't in the database yet. Are entries above this in another backend ? If so try importing that backend first. Also, that dn is so long, that it exhausted the buffer which is used to write messages in the access log. This is why, there's nothing after "which".
What is the exact reason why a export and import is necessary? Or is it only necessary if
the database is already corrupt? Is there a way to check that?The database corruption could be silent. So a binary backup/restore when going from 6.2 to 6.3 is not recommended and the LDIF route must be used.

Indesign CS3 Installer Database Corrupt? (Now what w/Win 8.1)

I have tried to install CS3 from my CD and from a direct download off Adobe and get this same message: Installer database corrupt.
Does CS3 not run on Windows 8.1? Any ideas on how I can make this work?
Thanks for your time.

If Bob says so, I'm sure he's right. I know we had a problem running the installer for the downloaded files and needed specific directions for that. Additionally, I believe that Acrobat 8 was not supported by Win 7 and we did get that working properly too.

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise

SQL Server Reporting Services installed on a production database server used to support JD Edwards EnterpriseOne. What performance isses can arise. Is it recommended. What are the pros and cons

Hi hazelannc,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot edit pwd.tmp file Installing IDM 7.1 database on Win2k8 - MSSQL 2005

Hi there,
I am installing IDM 7.1 on a virtual Windows 2008 Server, MS SQL 2005.
I am stuck at a very early stage in the Installing-SQL-database guide; I have tested the database
connection successfully, using the mxmc-test.cmd script. I am failing on the next step, running the
mxmc-install.cmd.
There are two different errors, both with the final message "echo was unexpected at this time".
The first error skips past the password prompt for users sa, mxmc_oper and confirm password
for mcmx_oper, shows the error message and then returns me to the command prompt.
Once I added my logged-in user [SID]adm as "mapped to the Database" in the
MS SQL Management Console > Login Properties > User Mapping, I got a new variation
on the above message.
The second message again skips past the sa user password prompt, but then
displays additional text:
E:\IDM\51035967\DATA_UNITS\IC_DESIGNTIME_71\Database\SQL-Server\mxmc-install
***Install an Identity Center database mxmc_db
***This command will install a new Identity Centre database.
***To continue press Enter, otherwise CTRL-C
Press an key to continue . . .
Enter password for user sa:
Access is denied.
E:\IDM\51035967\DATA_UNITS\IC_DESIGNTIME_71\Database\SQL-Server\pwd.tmp
Access is denied.
Enter password for mxmc_oper:
Access is denied.
Confirm password for mxmc_oper:
Access is denied.
echo was unexpected at this time.
I have previously enabled the sa user, and reset its password to be the installation
master password. I first tried with domain\[SID]adm , then localmachine\[SID]adm, then
with Domain\Administrator, and lastly with local machine\Administrator
Whan I manually add some text to pwd.tmp, I am not allowed to save the file, as
either [sid]adm. As administrator I am able to save the file.
When I run the script as either Administrator I get the first error.
With either [sid]adm user I get the second error.
So it appears to be Windows 2008 Server file security, for my [sid]adm users.
They are both in the Administrators group for the local machine,
and the E:\ has full access for Administrators group.
Any help would be greatly appreciated!
Kind regards,
Andy Minshull

I have solved this issue; there are two parts to the solution;
1: Write Permission to pwd.tmp
Although the installation cd folder had already been copied from the host to the VM guest, copying the folder to a new name resolved the issues with the file security. Not sure why exactly, but once done, SIDADM is able to edit pwd.tmp manually, as well as via the script.
2: Alternative Install Script.
We were greatly helped [by this SDN post|Re: identity center install problem: "echo unexspected at this time";, 4th reply:
(I'm installing on a virtual machine)....
Then I tried mxmc-xinstall with given prefixes. That worked for me.
On inspection of the mxmc-install script, it sets the necessary variables, based on some user input, then passes the values to the script mxmc-xinstall. Running mxmc-xinstall with no switches shows the prefixes required. Also, the mxmc-xinstall script is outlined in the Install guide, under section "Installing the Identity Center database with a given prefix", since it provides the opportunity to choose a prefix other than the standard "mxmc".
These two actions have solved my problem. So, based on the fact that Karsten had the same problem, on the same OS and on a VM, I guess it is safe to assume that this is a bug specific to using Win2k8 on VMware. Our VMWare version is Server 2.
All the best,
Andy
Edited by: Andy Minshull on Jan 7, 2010 12:23 PM
Edited by: Andy Minshull on Jan 7, 2010 12:28 PM

PSE12 install: Error 1335, Data1.cab corrupt

PSE12 install: Error 1335, Data1.cab corrupt
Install from online purchase with download, all remedies are relevant to CD-ROM?!
How do I get my money back?

great. for others:
if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial number.
if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

Zenworksd Database Corrupt

A while back I had a problem with the Zenworks database starting on a NW6
SP5 server running Zen 6.5 SP2. I was told to copy the database off to a
PC and then back to the sever. This worked great and I was able to
restart the database and continue on. Since then I have had this happen
twice more on the same server. Completing the above process appears to
fix the problem but it continues to come back. Yesterday I had the same
problem on another server. I might add that these server are at
different schools and have no phyicial connection to each other.
How can I resolve this permanetly?
Thanks,
Coy

All,
I followed the TID Shaun listed and copied the Zenworks folder off and
then pasted it back. I when through each database files and right
clicked and checked do not compress. The error occurred again. This
time I went in through NRM and set the Don't Compress setting for each
files including the NAL.DB file. In the 2 days since I did that I
haven't received a database corruption error.
I am not sure if I am doing this correctly, is there another place to set
do not compress?
Thanks for your help,
Coy
> ensure that the database does not get compressed is one option
> http://www.novell.com/support/search.do?
cmd=displayKC&docType=kc&externalId=10075966&slice Id=&dialogID=8172969&sta
teId=0%200%208180432
>
> --
>
> Shaun Pond
>
>

How should i know that i have or already installed these in my database?

my question regarding the steps in Post Installation Actions in installing patchset Oracle 9i Data Server 9.0.1 Patch Set 4 for Sun SPARC Solaris (32 bit Database)
I'm not very sure about the instruction..
How should i know that i have or already installed these in my database?
Should i run all even if i don't know whether i use them or not?
Or should i do nothing, and continue to my next patch installation?
-Execute the following step only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed the Oracle Label
Security option in the database you are attempting to modify:
-Execute the following steps only if you have JAVA enabled in your database:
-Execute the following steps only if you have installed UltraSearch in the
database you are attempting to modify:
-Execute the following steps only if you have installed Oracle Spatial or
Oracle Locator in the database you are attempting to modify:
-Execute the following steps only is you are using the RMAN catalog.:
Plz advise..
Regards,
Rushdan Md Saad.

It all depends. You don't NEED anything, Firefox runs just fine with it's default setup, and you don't need to install anything to fully experience the best of the web. But lets say you don't like ads. Install Adblock plus. Lets say you want to change themes, there are dozens of them. It's all personal preference.

Logical names lost after database corruption removal

Hi,
I am working on a PXI based project using NI 5663 and NI 5673. The MAX database in system got corrupted recently due to power cut.
I did a database corruption removal and the only issue I face now is that there are no logical names for the devices. I am following the steps from the site below to create the same –
http://www.ni.com/white-paper/4594/en
But after I create a new logical name say for the LO 5652 (associated with 5663), I do not know which driver session to associate with it.
There are driver sessions for niFGen, ni5450 in the list but no session for 5663 or 5673.
Could someone please help me out with creating logical names and associating them to the devices?
Thanks so much,
Sharmi

Hello,
To configure your 5663, you can refer to the RF Vector Signal Analyizer Getting Started Guide pages 37 - 39.
You should open Measurement & Automation Explorer and rename the devices such as VSA_LO, VSA_DC, VSA_DIG for the local oscillator, downconverter and digitzer respectively. Next you will need to associate the downconverter with the local oscillator and digitizer by right clicking the downconverter and selecting properties
To configure the 5673 the steps will be fairly identical, rename the devices if you wish and then associate the upconverter (IQ Vector Modulator) with the arbitrary waveform generator and the local oscillator. You can also refer to the RF Signal Generator Getting Started Guide on pages 23 - 24.
Which programming language are you using the VSA and VSG with? You normally wouldn't need to configure any IVI sessions the the devices. The only configuration normally is just associating the upconverter or downconverting with the LO or digitizer/AWG module.
Anthony F.
Product Marketing Engineer
National Instruments

Re-install b/c of database corruption

Similar Messages

Maybe you are looking for