Re-Install of 10.4.6 from original DVD will not complete on MacBook Pro

I purchased a new MacBook Pro 15" laptop around Oct 1, 2006 and I am now unable to use it.
It came with 10.4.6 installed. I updated the system to 10.4.7 and 10.4.8 using update packages directly from the Apple site. Then I ran a Security Update to 10.4.8 and nothing has worked right since.
I tried using Disk Utility in every way and was always able to repair with no errors found. I tried to troubleshoot various applications to see if they were the issue with no improvement. The ultimate problem was the entire system would freeze and would have to be rebooted. Sometimes the system would boot up, sometimes the apple and gear would run and then a circle with a line through it would replace the apple symbol. Sometimes I would get the dreaded blinking folder with question mark. Most of the time rebooting could eventually get you to the desktop, but the system never worked for longer than 15 to 30 minutes.
So, I decided to reinstall 10.4.6 from the install DVD that came with my computer. I cannot get 10.4.6 re-installed. I have used disk utility to erase, repair, partition and so on and after a few tries it repairs succesfully.
I ran the Hardware test and it says no trouble found.
The install log ends with the following three errors:
1. unable to copy package source file OSInstall.dist to destination reciept ...
2. unable to copy package source file archive.bom to destination reciept
3. Install failed: Some Files for Base System may not have been written correctly.
I am at the end of my rope. Please help. Thanks!

I agree...bad drive or bad controller or even a bad connection. Hardware issues on computers still under warranty should be dealt with by Apple. Even though you have already run the hardware test, there could still be a hardware problem. You could try booting from a disk repair utility like Disk Warrior but that means you would have to buy the utility and that's money you should not have to spend on a machine that is still covered by warranty.
There is one other thing you could try and that would to try and boot the computer into "safe mode" and try everything discussed in this article:
http://docs.info.apple.com/article.html?artnum=106214
Also, if you have access to another Mac, you could try booting your computer into target disk mode and then run disk repair from the other computer. Also, if you computer boots into target disk mode, you can copy any vital data and files before you hand it over to Apple for repair.

Similar Messages

  • ICal posts from iPhone 4s will not sync onto Macbook Pro iCal

    I have a MacBook Pro version 10.6.8 and an iPhone 4s iOS 6.1.3
    I cannot seem to transfer the events that I add to my iPhone's iCal to my MacBook's iCal.
    I have all the calendars synched to my iPhone, but can't figure out to get the stuff from my iPhone to MacBook Pro.
    Any suggestions?
    Thanks.

    When you say "I have all the calendars synched to my iPhone," what is on the other end of that synch? iCloud? Google? Something else?
    If it's iCloud, you have a problem. 10.6.8 doesn't really play well with iCloud, which did not exist when 10.6.8 was created. (10.6 was built to use MobileMe, which was replaced by iCloud.) iCloud was one of the new features announced with 10.7, and it didn't really come into its own until 10.8.
    At one time, I would have recommended that you purchase BusyCal 1.6, which could run on 10.6.8 and could synch with iCloud. Unfortunately, BusyMac no longer sells BusyCal 1.6 or any other version that runs on 10.6.8.
    There may be other products with similar capabilities, but I never tried them, so I cannot recommend one. Maybe somebody else will come along with a recommendation.

  • I am trying to install the latest update for HP Printers, it will not completely install ,now my printers won't work. Help!

    I am trying to install the latest update for HP Printers, it will not completely install ,now my printers won't work. Help!

    Hello Carolyn -  Thank you for your quick response to my concerns, I had already gone to the HP support site and tried to get the latest HP drivers, the site said for Lion 10.7 there was NA version.  So, I just used my time machine to replaced the OS from that time spot. I got my printers working again, so all right with the printer.  But, the fact remains that I still keep getting the New Update HP Printer in the software update window.  But, what happens if I try to download and install it is this:  It starts the download, everything seems to come down fine, it starts write the files and then starts moving items into place, the blue bar fills to all most the end and slows down to a stop and never completes the installation.  I have left my laptop on over night and it never finishes the operation.  I can only force quit the software update.  Which has knock out my printer drivers.  Now, I just keep unchecking the box in the software updates for new HP printer software. Is anyone else having this problem or is it just my system?  Sincerely: Professor G

  • CS4 Install DVD does not mount on Macbook Pro after Maverick upgrade

    I upgraded a Macbook Pro to Maverick from Snow Leopard. I want to install CS4 but when I put the DVD in the Superdrive, it spins and spins and eventually says that the DVD is blank. I have successfully mounted other DVD's so I don't think it is a drive problem. I have also tried the DVD in a newer model Macbook Pro and it mounts successfully. Does anyone have any idea what is causing the problem. More important, is there a different method I can use to install CS4?

    I am not saying that the CS4 applications will not work but Adobe has never tested All CS4 applications on MAC Maverick. It might or might not work.
    http://helpx.adobe.com/creative-suite/kb/system-requirements-cs4-point-products.html
    But yes if that works, its good. I just wanted to keep you updated in case in future if the application gives you any issue with the performance.
    Help Articles:
    http://helpx.adobe.com/x-productkb/global/mac-os-mavericks-compatability.html
    Files open, save slowly | Mac OS X

  • Just formatted my mac but iLife (from original disc) will not install

    hi all!
    I've done a routine format of my Macbook Pro 13" a couple of weeks ago, it all went well but I seem not to be able to install the bundled applications from the orignal, grey cd that came with my mac.
    I insert the cd, start the procedure then just after keying in my admin password the insatllation stops...i.e. it fails to start.
    As new, my machine runs OSX 10.6.6 but I've already upgraded to 6.8 ... I've tried to install iLife before and after upgrading.
    I've been to an Apple Store — since my laptop is less than a year old — but they say warranty doesn't cover software...in any case, I've also tried to install an iPhoto downloaded from the internet, but with the same results, so I'm thinking it might not be a corrupt disc...
    Any idea other than re-formatting the machine?
    thanks!
    dani

    Erase and install 10.6 again, but this time use the Security Option > Zero All Data on the drive, you have bad sectors.
    Reducing bad sectors effect on hard drives
    How to erase and install Snow Leopard 10.6
    If that doesn't work, then your cd is bad. clean it and try again or try extracting iLife using Pacifist. (but you need your bad sector issue resolved)
    Also run through this list and get back with me, I doubt anything else is a problem on a fresh install, but there might be.
    Step by Step to fix your Mac

  • Not all of my photos from my iPad will sync with my macbook pro retina. Any advise would be appreciated as I am a Mac beginner.

    Not all of my photos on my ipad sync across to my macbook pro retina.Any help would be appreciated. Thanks

    Thank you - I have done this now but resetting and restoring from another device didn't really help. However, syncing via iTunes was a bit more successful as it occurred to me that many of my contacts are in MS Outlook on my PC and I was able to copy them over.  There are still some contacts missing and I am continuing to try and figure out where they originate from to try and get them to show up. 

  • Battery removed from ipod touch, will not complete recovery

    the battery died a long time ago on my ipod touch 32gb, think it is 1st or 2nd gen, when i plug the ipod in it still lights up and works but asks me to plug it into itunes, when i do that itunes says i need to restore it but when i start the restore process the apple logo reappears on the ipod then it dies and i get an error message from itunes, usually unknown error 1604 or 1603, sometimes 1611. all i want to do is leave my ipod plugged into a dock to play music without the ipod having a battery will this work, surely there must be a way if it's still showing the screen when plugged in

    hi thanks for your reply, i tried all of the things on this page already and still no luck, itunes goes into preparing ipod for recovery, the screen on the ipod switches from telling me to connect to itunes, to the apple logo for about 10-20 seconds then the screen on the touch dies and the update either fails or just sticks on preparing bar
    really quite annoying this

  • Trying to install Photoshop Elements v6 on my Mac from original DVD.

    Trying to install Photoshop Elements v6 on my Mac from original DVD. Error message "Set up error Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance" I had inadvertantly binned the original copy of PSE 6. I have tried to remove the various 'bits and pieces' of PSE 6 but still get error message. Can I reinstall from a Time Machine Backup?
    I really need help with this!

    you can try using time machine and you can check other users experience using your os and pse 6, http://roaringapps.com/apps:table

  • I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    Did you follow the instructions on the page linked below?
    OS X Yosemite: Recover your entire system

  • I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro

    I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro..... please try to make it easier for me since im new to the Mac OS

    1) Copy all music files to a thumb drive / external hard drive.
    2) Open iTunes on your MacBook Pro (congrats!)
    3) Under the File Menu, select "Add to Library."  Navigate to the folder with your music in it and click "Open."  Bam!  Music.

  • I just installed a multifunction Lexmark Pro905 printer and it will not print from Firefox, but will from Explorer????

    I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??

    When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
    http://kb.mozillazine.org/Problems_printing_web_pages

  • I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

    I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?

    For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
    If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
    Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
    This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
    If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible.

  • HT201269 Now that I installed Match and icloud I tried to sync my ipod and the previous songs that were on my lap top in itunes that i copied from CD's will not transfer over to my ipod.

    Now that I installed Match and icloud I tried to sync my ipod and the previous songs that i transferred to my lap top from CD's will not transfer to my ipod.

    That is correct. This
    iTunes Match on iPhone, iPad, or iPod touch
    says:
    When you enable iTunes Match on your iOS device, the music library on your iOS device will be deleted and replaced with your music in iCloud.
    Syncing music with iTunes will be disabled while iTunes Match is enabled on your iOS device.

  • Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
    I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

    I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
    First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
    1. Shut down the computer
    2. Reboot and open firefox
    3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
    4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
    5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
    6. Once it finally opens, backup your bookmarks,
    7. Download a copy of firefox from there website
    8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
    9. install the new copy and BOOM! it works
    If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

  • Messages from iPad not Synching with MacBook Pro when Powered Off

    I have the new MacBook Pro (2 GHz, i7, purchased Feb 2014), 15" Retina running OSX 10.9.4.  I also had an iPad3 (Retina) but just upgraded to the new iPad Air 2 weeks ago.  I do not have an iPhone, but that's next.  I have used the same iCloud account for all devices.
    The issue:
    Messages (or message conversations) that I have when using my iPad Air are not synching with the MacBook under certain conditions.
    1) If my MacBook is on, there is no issue. Messages between devices (whether being composed on the iPad or MacBook) synch instantly between devices.
    2) If my MacBook is sleeping, most (but I do not think all) messages sent from my iPad will synch with the MacBook when it wakes up from sleep.
    3) If my MacBook was powered off and I had message conversations using my iPad while the MacBook was off, these messages do not synch with my MacBook after I turn it back on.  BUT, this depends:
         a) if I power on the MacBook shortly after (5-10 min) I had the message conversation on the iPad, sometimes these messages on the iPad will synch with my MacBook after I power it on.
         b) If my MacBook was powered off for several hours after I had a message conversation on my iPad, and then I power on the MacBook, these conversations are not synching on the MacBook at all.
         i.e Assume MacBook is powered off.  I have a message conversation on my iPad at 4:30 PM.  If I power on my MacBook at 4:35 PM, the message from my iPad synchs with the MacBook.  However, if I power on my MacBook say at 10 PM or the next day, then the message conversation I had on the iPad DOES NOT synch with my MacBook.
    Confused?  So am I.  To complicate matters, I did not have these issues while I had my old iPad 3.  I only starting noticing it when I bought the new iPad Air two weeks ago.  I do not know if this is related.
    Another issue:  SOME message conversations on my MacBook and iPad air now appear to get out of chronological order.  In fact, on my iPad air, I received a message at 10 AM (message A) and then had several other messages with this person throughout the day on my iPad (at 11 AM, and then 2 PM).  Later that evening around 10 PM, the original message (message A) was received again as a new message on my iPad (i.e. received a new message notification).  Now, message A appears out of order (it shows the timestamp of 10 AM, but it displays after the messages that came at 11 AM and 2 PM).  Since my MacBook was on, these messages synched with my MacBook, but were (and remain) in the proper chronological order.
    Other iCloud apps (calendar, mail, FaceTime notifications, notes, keychain, Photo-stream etc. seem to be synching fine between devices).  One last observation, when I bought the iPad air and restored it from the backup I made from the old iPad 3, everything restored fine from the backup except for Calendar.  For whatever reason, some old calendar entries did not restore on the new iPad.
    I have run a myriad of tests (sending messages to myself from both my new and old iPad (even created a new apple ID from the old iPad)) with my MacBook sleeping or powered off for varying amounts of time in order to provide the information above.  I also reinstalled the operating system on my MacBook but this did not resolve the issue.
    If anyone has any ideas or suggestions, I would be extremely grateful. I have been in contact by phone with Apple support and have them baffled as well, but they are doing their best to help.
    Thanks,
    HankSTL
    ps.  I may post to several communities so if you see this message in several communities, I am just trying to get the best coverage.

    The same thing is happening to me.
    And it's similar to this thread:
    http://discussions.apple.com/thread.jspa?threadID=2492646&tstart=0
    Thought I'd cross-ref the two.

Maybe you are looking for

  • How to edit flat file in application server

    Hi all, I have requirment of flat file load. User will update flat file and I need to upload data in cube. I am done with loading data from application server flat file to cube Now I want to know where this file will be stored so user can update the

  • Deadlock issue in Oracle 10g Partitioned Tables

    Hi ALL, I am facing an issue of Deadlock while inserting data into a partitioned table. I get an error "ORA-00600: Deadlock detected". when i see the trace files, following lines are appearing in them: "Single resource deadlock: blocking enqueue whic

  • The type tool is not working

    I upgraded from PSE9 to CS5 and I can no longer view any of the fonts or use the type tool in either program.  What do I need to do to fix this issue?  Thanks for any help!  Cindy

  • Proxy Authorization with COS connection limits Issue

    Any one having issues with connection limits (nsSizeLimit, nsTimeLimit, etc) be applied on connections that come from the proxy server with the proxy authorization control? Example: nsSizeLimit is set on user A to 2000, via a COS Pointer definition.

  • How to enter hierarchy-variables directly (without choosing from a list)

    Hi folks, using business explorer Support Package 18 Patch 2 (and earlier) we face the following problem: when having to enter a hierarchy-node as variable one has to choose the node from the history-list or even from the hierarchy itselft. As we hav