Re-Install Portal

iam planning to re-install the sneak preview of EP.
What is the correct of re-install completely from the system?
anybody?plz..

You can Uninstall Portal instance using following two options.
I was able to un install with the following options.
1) Run startuninstall.bat from \usr\sap\Instance Name\JC00\j2ee\portal_misc\uninstall directory.
This will take care of the Portal instance.
Drop the database using SQL Server Enterprise Manager.
If the above fails, following work very well. This will clean up users & services also. This is very clean.
2) Use UNINSAP.exe file from your installation CD. This is located at the same place where you start sapinst.exe.
Let me know how it goes. Give me full points. I am confident it will work. It worked for me.

Similar Messages

Installing Portal server on Solaris 10

hi,
I am installing portal server on a zone in Solaris 10 machine.Access Manager could be installed success fully . But now I am trying to install portal server. but it is showing installtion failed and configuratioin failed.
Are there any special steps to be followed fro installation of Portal server on a different zone.
The only product I have installed is the AM.
please advice
thanks in advance
dhawanmayur

Hi,
I ran into trouble because the installer "forgot" to install SUNWldapcsdk-tools, but later tried to use /opt/SUNWdsee/dsee6/bin/ldapsearch, which wasn't installed (and the error I got was just that installation and configuration failed).
You could either run the installer twice, first time just install the Directory Server, then manually install SUNWldapcsdk-tools (it is in Product/shared_components/Solaris_10/Packages directory), then run the installer again and install the other modules. Or you could get the Directory Server as a separate download, install that first (it is supposed to install everything you need, but I haven't tried it) and then run the installer for AM and the portal.
Cato

Install Portal and Database with modem turned off?

I am about to install Oracle Portal 9iAS with Oracle 8i database in a Win2000 PC. I have a cable internet connection that uses DHCP to dynamically assign IP and DNS addresses. Would DHCP be a problem? Should I make the installation with the modem turned off?
Thank you very much,
Melissa

I installed Portal and Database on my machine at home which has both a public and private IP and there were NO problems doing it with the modem on and connected.

"ORA-12222 TNS no such protocol adapter" When running Forms after installing Portal

We have a Forms 6i (web) application running on 9iAS. This worked fine. But after installing Portal on the same 9iAS, we got the following error when starting the WebForms application:
ORA-12222 TNS no such protocol adapter
Who knows a solution?
Configuration
9IAS v1.0.2.2
8.1.7
Form 6i Patch 10
Windows NT
Best regards,
Harm van Zoest

This is s SQLNET error.
You can search for it on OTN using the search button.
IT usually means that the tnsnames.ora file was changed. Or that you are now using another tnsnames.ora.

Installing Portal Server 7.1 on Windows XP

I installed Portal Server 7.1 for Windows, via the Sun Java Application Platform Suite Installer. The installer was super clean and very easy--practically idiot-proof. It is substantially easier to install than the SPARC version.
However, during installation and configuration--done via the GUI--the Portal Server configuration failed. After performing all the necessary post-intallation tasks, I discovered that CACAO will not start. When I attempt to start CACAO, I get the following:
"Cannot start an unconfigured instance. "
--(This is a doc defect. The doc should tell me to configure before starting)
After attempting to configure, by following the instructions, I get the following error:
"Error handling error: 1722, LookupAccountName at <cacao-base>\cacao_2\\configure.pl line 120."
Is this a bug or is this yet another documentation defect? Anyone experience this during a Windows installation?

Hi,
I'm also trying to install Portal Server 7.1 and configure the same , getting the same error
---------------- "Cannot start an unconfigured instance."
I went to the cacao log location "C:\Program Files\Sun\JavaES5\share\cacao_2\var\cacao\instances\default\logs" to find out the errors but could not find any log files there.
But when i went to the AM log location "C:\Program Files\Sun\JavaES5\identity\debug" . I found three files namely,
amEventService
amSDK
CCPPClientDetector
there contents are as follows,
In amEventService
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
rminating! Persistent Searches will no longer be operational.
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
ERROR: EventService.run() - Monitor thread is terminating! Persistent Searches will no longer be operational.
In amSDK
03/13/2007 06:07:23:365 PM IST: Thread[EventService,5,main]
ERROR: Connection to LDAP server threw exception:
netscape.ldap.LDAPException: failed to connect to server ldap://w2gzw3vm01.apac.corp.eds.com:1389 (91); Cannot connect to the LDAP server
at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:517)
at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:437)
at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:276)
at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:201)
at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1081)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:952)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:903)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1050)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1060)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1005)
at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:387)
at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java :354)
at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:283)
at com.iplanet.services.ldap.DSConfigMgr.getNewAdminConnection(DSConfigMgr.java:24 0)
at com.iplanet.services.ldap.event.EventService.addListener(EventService.java:351)
at com.iplanet.services.ldap.event.EventService.resetAllSearches(EventService.java :673)
at com.iplanet.services.ldap.event.EventService.run(EventService.java:515)
at java.lang.Thread.run(Thread.java:595)
and In CCPPClientDetector
03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:50:04:205 PM IST: Thread[main,5,main]
03/13/2007 05:50:04:190 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
any ideas on what I'm missing ?
Thanks in Advance,
Vinayagan

How to install Portal Examples in Weblogic Portal 10.3.5

I downloaded installation file portal103_win32.exe from Oracle site which is for Weblogic Portal 10.3.5. During the installation process I could not find anywhere I can choose to install Portal Examples.
Did I miss anything when I did the installation or Portal Examples have just been removed from the installation file for Weblogic Portal 10.3.5?

Thank you Emmanuel.
Is it because the features in Portal Examples were not supported anymore since 10.3.4?

Install Portal, Forms, Reports, Discoverer on weblogic

I have weblogic 10.3.4 installed and configured. I am trying to install Portal, Forms, Reports, Discoverer on top of weblogic so I can host my (fmb and fmx ) oracle forms and reports based apps.... i downloaded 11.1.1.2 Portal, Forms, Reports and Discoverer... but when I try to runInstaller it bombs and I get an error /PFRD : not found....
Edited by: user9021545 on Sep 14, 2011 5:51 PM

Just unzip all the zips to the same directory, then you can something like:
Directory
- Disk1
- Disk2
- Disk3
- Disk4
In Disk1 the runInstaller is present and can be run
After the installation you can do the same for the patchset
PatchSet11.1.1.*
- Disk1
- Disk2
- Disk3
Disk1 contains the runInstaller
You need to perform four steps:
- Install the WebLogic 10.3.4 software
- Install the Fusion Middleware 11.1.1.2 Portal,Forms,Reports,Discoverer software
- Install the FMW 11.1.1.4 Patchset for Portal,Forms,Reports,Discoverer
- Configure a Fusion Middleware instance (the configuration steps are presented here: Re: 10gAS to 11g - Do I have this correct?

Install Portal into remote 9.2.0.3.1 database

Has any successfully installed portal into a remote 9.2.0.3.1 database? My O/S is Windows 2000. I've got IAS Rel 2 9.0.2.0.1 installed and patched up to 9.0.2.2 I've been working with MetaLink, but so far they haven't been able to solve the problem. The issue is that the DAD will not work. Everything appears to install correctly, but after creating the DAD and bouncing the http server, the DAD won't come up. Yes, I can connect with sqlplus, yes there are valid tns entries. I've even created a DAD to my existing portal30 install in my 8i database and that works. Its just this 9i install that refuses to work.
Does anyone have any ideas?

I turned on debugging in the DAD and this is the message:
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
Proxy log On failed.
Please verify that you have specified correct connectivity information i.e. username, password & connect-string in the DAD
Error-Code:12638
Error TimeStamp:Wed, 28 May 2003 12:31:15 GMT
The Apache error log has this in it:
[Wed May 28 07:54:49 2003] [error] mod_plsql: /pls/pallportal/pallportal.home HTTP-503 ORA-12638 <B>Proxy log On failed.</B><BR>Please verify that you have specified correct connectivity information i.e. username, password & connect-string in the DAD

Error installing Portal 3.0(ORA-00600)

I have installed OAS9i 1.0.2.2 Standard Edition on PC with Windows2000 Server and on other PC with Windows NT 4.0 Server. When I start to install Portal installation is returning an error message.
"STEP 8 : Installing WWV layer Components
INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ibm.cabral.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) @..\..\portal30\admin\plsql\wwv\wwvinst.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ibm.cabral.com)(PORT=1521)))(CONNECT_DATA=(SID=orcl))) @..\..\portal30\admin\plsql\wwv\wwvinsty.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
ORA-00600: internal error code, arguments: [15456], [WWA_API_MODULE], [13],
Errors encountered in the Install process. Installation Aborted."
Somebory knows what is happening?
Regards,
Wagner Cabral

I got the same error.
but only in one of the instances of the database (I installed to application servers, one for development, one for production).
One of them worked fine. But in the other installation (I tried to do it with the same computer) I keep getting that error message.
Please let me know if you find out how to fix it.
I4ll keep searching the OTN database for a solution
Regards
Javier Murillo
[email protected]

Error installing Portal 9i

I have the following error installing Portal 9i
"An unexpected error occurred during install process. Check the install.log located at <Oracle_Home>/assistants/opca for more datails."
So I went to the install.log and I found this log:
"PLS-00201: identifier 'owa_vpd_ctx.set_ctx' must be declared
error encountered in the install process. Installation aborted."
Please replay to me if you know what should I do. I have been trying to install the Portal 9i for a week without success. Thank you very much.

Do you have a good reason to install this version of the application server? It is several years old.
Here you find the most recent version, Oracle Application Server 10g.
Peter

Some malfunction after install portal system

Hi.
We are preparing Portal Production system (EP 6.0 Portal SP15 + KMC SP15).
After we installed Portal System, I found some malfunction in portal.
malfunction 1.
a. I logon portal and click "system administration" menu.
b. I checked there is no horizental scroll bar in dynamic nagigation area.
c. I clicked "collapse" icon in detailed navigation.
d. horizental scroll bar displayed in dynamic nagigation area.
Why did horizental scroll bar display in dynamic nagigation area in spite of
we have enough area ?
malfunction 2.
a. I logon portal and click "system administration" menu.
b. I clicked "tran menu" icon in portal favorite.
c. browser error displayed ....
Anyone experience this problem.
How can we fix this problem ?
Regards, Arnold.

Are you accessing the Portal with the IP address, if yes then you have to access it with the FQDN (Fully Qualified domain name) OR with the Host name atleast.
URL: http://host.domain.com:50000/irj
Regards
Vaib

Problems installing Portal 2

when we install Portal 2 it takes us to the steam web site where it always says that the server is busy and to try in a few minutes. We have been trying for over a week and the same message.

This question might be better taken up in the Steam for Mac forum:
http://forums.steampowered.com/forums/forumdisplay.php?f=891
I see a number of discussions about "server busy" issues there, so it's apparently not an uncommon problem, but one that has a number of different causes and hence solutions.
Regards.

How do I de-install Portal - Just want Apache server

I seem to be forced to installing hundreds
of megabytes of stuff that I don't want.
How do I just install the Apache/Jserv/OJSP portion of IAS?
I tried using the installer to de-install Portal but it won't let me because of the
dependencies..

hi,
drop the portal% users, remove the portal30
directory and remove the wdbsvr.app file.
If you don't want to use the modplsql cartridge, then either remove or rename it
and don't forget to comment out the appropriate sections of the oracle_apache.conf. Course, you should try to uninstall using the installer first, as that is the recommended way (and supported).
My solution is the quick and dirty way

Error on step 2 installing Portal

HI!
Trying to install Portal to Oracle9i database.
On step 2 there is error ORA-28009 - connection to sys should be as sysdba or sysoper.
However sys has a sysdba and sysoper priveleges.
Trying to install Portal to OPracle8i database. It's okey.
Why? Doesn't supply Oracle9i Portal?
I use iAS1.0.2 and Portal include it.
Help please.

Do you have access to 9iAS Release 2? If you have the permissions, you can download it at http://otn.oracle.com/software/products/ias/devuse.html . This will save you many headaches when trying to install Portals. For some reason, Portals in 9iAS Release 1 doesn't work very well with 9i Database.

Computer Hangs in installing portal

whilr installing portal after 56% in oracle portal configuration asistant it hangs i did it more than once i need to know what to do
thanks

Gamal,
I have never tried the install on win2000 so could be a OS specific problem in executing the loadjava through the Command Line or the Portal Configuration Assistant is not properly handling the stderr stream for this command.
The Portal Configuration Assistant basically opens the a OS command session window to execute the last line you see in the install.log , ie
C:\oracle\iSuites\assistants\opca>..\..\bin\loadjava -resolve -verbose -thin -user portal30/portal30@Gamal:1521:orcl ..\..\portal30\admin\plsql\lib\xmlparserv2.jar
I can give you a workaround that will try to get the rest of install going, but we still need to figure out why its hanging at this command. Assuming you are at the 67% hanging stage, open the Task Manager and kill the cmd process ( Well in NT , its was called cmd I am not sure what's its called in 2000) that is running this process.
At the end of the install, run the command that failed from the command line. Lemme know if it gives out any error.
Thanks,
Arun

Cannot Install Portal in Mid tier that exist

I have a Mid tier 10g 9.4.0.1.0 installed and now I want install Portal and Wireless, but I received this error message:
"Install has detected that you have previously installed a hegher install type of Oracle Application Server 10g in this home..."
I'm running the runInstaller in ./oui/bin from Mid tier installed.
Any idea?
Thanks

Hi,
You cannot install two midtiers in a single Oracle Home. You have to specify a different location in your disk during the second installation.
Regards,
Mahesh

Re-Install Portal

Similar Messages

Maybe you are looking for