Re: Invalid MAC Code?

I am having the same problem (switching my broadband from o2 to BT and being issued an invalid mac code) and i am getting nowhere fast.  My broadband with o2 worked very well for well over a year.  The wireless router was good enough to let me son play his xbox live in his room and for various mobile phones to get internet connections.  Then without warning o2 did an upgrade and my router stopped working.  I was sent what they called a better router - it wasn't.  Kept disconnecting and there was no signal throughout the house.  I complained and they sent me a second better version and again the same problems.
I then decided to move to BT who assured me there router was much better.  And so the nightmare began.
o2 issued a mac code for the broadband and BT said it was invalid because there was something incomptable.
Went back to o2 and they insisted mac code was valid.
Returned to BT and again I was advised that mac code was invalid.
Back to o2 then BT then o2 then Bt then o2 then BT etc... etc..
Decided to contact Ofcom and they advised me the responsibility lay with o2 and that I should ask to speak to a manger.  I did try however getting to a manger seems to be almost impossible.  I was promised by o2 that they would send me another mac code and the advisor did admit they were having technical difficulties!!!
Still waiting ........

Hi, 
I have had what I beleive to be a similar problem with my present ISP Talk Talk, I wish to move to BT Infinity and having placed the order,was asked to request a Mac Code from TT which they duly provided.
This is where the fun begins !!
Promptly fed the Mac Code into the required online form - not recognised ! tried again and again - same result ! .
Contacted BT help and they explained that I would need to be on BT Broad Band before I could upgrade to Fibre,to which I accepted that may be the case.I then mentioned about the problematic Mac Code to which the CSrep took down the code and said he would then ring me on my mobile the following day with regard to instructions about Fibre Optics order and mac code problem. This he did but unfortunately the same problem with the mac code occurred.
So am now in the dilemma of being in between two ISPs albeit still connected to TT I would like to have been in a more positive situation with BT

Similar Messages

  • MAC Code is Invalid

    I am on BT Infinity but after going through a total nightmare including taking money out of my bank account in 'error' then refusing to refund my bank account, I am leaving BT.   I was given a MAC Code but guess what???? Yep it's invalid.  Ofcom states that ALL MAC Codes begin with the letter L but mine does not.
    Trying to find out if it makes any difference if I am on fibre and moving back to ordinary broadband with my new supplier, i.e., would the MAC Code still begin with L no matter if its fibre or not??

    Seen this thread?
    New codesign behavior, --deep option 
    "Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

  • HT204053 I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

    I recently had to cancel my debit card because of unauthorized purchases on Facebook. I have tried to update with 4 different credit cards and every time I get a message saying invalid security code. How do I fix this?

    Debit card? Are you sure?
    USA iTunes Store does not appear to accept debit cards - http://www.apple.com/legal/itunes/us/terms.html  "The iTunes Store, Mac App Store, App Store, and iBookstore services (“Services”) accept these forms of payment: credit cards issued by U.S. banks, payments through your PayPal account, iTunes Cards, iTunes Store Gift Certificates, Content Codes, and Allowance Account balances."

  • Invalid key code and multiple installs

    OK, so I got a new iMac and tried to install vista on it like I had on my old iMac (2006 Model). However, when I finished the installation it started a new installation and it ended up installing vista twice. It would have done and third install, but I held down the option key during install and manually selected the windows partition instead of the Windows install CD. However, not all of the Windows features were installed like Aero so I deleted the windows partition. My iChat buddies list got deleted so I had to delete my iChat preferences (don't know if this will help).
    Anyway I tried to re-install Vista this morning and it said my key code was invalid, although it worked yesterday. What is the problem? This is the second invalid key code problem I've had on this Mac (the first was with Logic).
    Oh also, there seems to be some remnants of Vista on the computer even after I deleted the partition because unless I held down option/alt during boot up it would try to run windows and would say no boot disc.
    Thanks in advance for any help!

    Can anybody help with this?
    I tried reinstalling it and it slowed down my boot up speed because it didn't install right and I had to delete the partition once again.
    The keycode issue has been resolved though for some reason...

  • BT will not accept my MAC code

    I am currently with Sky Broadband, and have signed up to switch to BT Infinity 2 (now that Fibre is available in my area).
    The BT order went through OK, and is on hold pending me providing the MAC from Sky.
    Off I went to Sky and asked them for it, which they gave me.
    Back I went to BT and keyed in my MAC in the Track your Order / Provide MAC screen.
    .. and that's where my issue begins!
    I type in the MAC I as given in "Step 1 of 2", hit the continue button.  Doesn't tell me if it works, if it's invalid, etc, just refuses to move on and deletes the data I key. I input the MAC again, select Sky from the dropdown, hit continue .. and back it goes to the beginning. I cannot get past that first screen to get to Step 2.  
    Thinking the MAC must be wrong, I go back to Sky, they confirm the MAC to me again.  I read it back to them, it's confirmed, I check a final time .. go back to BT and key the number in again .. and I just cannot get it to accept the code, which Sky have confirmed to me umpteen times as being valid!
    Is there a problem with the BT site accepting MAC codes?! 

    I rang the sales line and told them my code - that works

  • Invalid redeem code

    I tried to update MAC OS X Lion with up to date program redeem code but I got invalid redeem code error. Actually I was received the redeem code from Apple via e-mail due to purchasing new MacBook Pro. Is it possible other way to upgrade my MAC OS X version?

    Perhaps you should Contact Apple:
    Mac Apps Store Customer Service:
    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Invalid product code when bought from apple

    Hello,  I am trying to help my sister install a copy of CS6 which she bought from Apple a month ago with her new mac. She is trying to follow the instructions to verify herself as a student and the identification website is saying that the product code is invalid or not recognised.
    I have filled out the contact us form and not had a reply, and have also tried to speak to one of the robots at Adobe and it just kept saying adobe cannot help with an invalid product code and to speak to the reseller, is this a piracy issue and the product code has already been registered? And if this is a piracy issue who is to say that Apple will be able to give us one which isn't already pirated?
    Can anyone help?

    As much as you may not like it: Talk to support. If you feel you're not getting the answers you want, escalate the case to the next operator level. You can also try to create a support case and post the case number over at the Download, Install & Setup forum which is monitored by Adobe staff. And finally, also try the web chat.
    Mylenium

  • Upgrade of 1131AG to LWAPP fails. "Invalid country code ()"

    Hi all,
    I have problems upgrading my 1131 Autonomous to LWAPP to be used towards an WLC 4402.
    I have used the Upgrade tool and tried with 2 different versions of the Cisco recovery image on 2 different 1131 hardware boxes.
    The upgrade seeems to go ok all the way. It downloads the image, reboot, connects to our WLC and starts the download of latest image from the WLC.
    But at next restart it won't connect.
    Version of WLC is 4.2.130. WLC is accepting self signed certs from AP's.
    The WLC has 8 functioning AP's connected. These AP's where LWAPP from start though.
    The WLC gives me the following errors when running debug:
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Received LWAPP JOIN REQUEST from AP 00:25:84:90:f7:f0 to 06:0a:10:10:00:00 on port '1'
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 AP AP0024.976f.8620: txNonce 00:1B:D5:68:D0:20 rxNonce 00:25:84:90:F7:F0
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 LWAPP Join Request MTU path from AP 00:25:84:90:f7:f0 is 1500, remote debug mode is 0
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Successfully added NPU Entry for AP 00:25:84:90:f7:f0 (index 9)
    Switch IP: xxx.xxx.1.101, Switch
    Port: 12223, intIfNum 1, vlanId 0
    AP IP: xxx.xxx.144.55, AP Port: 63586, next hop MAC: 00:00:0c:07:ac:01
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Successful transmission of LWAPP Join Reply to AP 00:25:84:90:f7:f0
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 spam_lrad.c:1766 - Operation State 0 ===> 4
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Register LWAPP event for AP 00:25:84:90:f7:f0 slot 0
    Thu Aug 20 12:28:56 2009: WARP IEs: (12)
    Thu Aug 20 12:28:56 2009: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Register LWAPP event for AP 00:25:84:90:f7:f0 slot 1
    Thu Aug 20 12:28:56 2009: WARP IEs: (12)
    Thu Aug 20 12:28:56 2009: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Received LWAPP CONFIGURE REQUEST from AP 00:25:84:90:f7:f0 to 00:1b:d5:68:d0:23
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Updating IP info for AP 00:25:84:90:f7:f0 -- static 0, xxx.xxx.144.55/255.255.255.0, gtw
    xxx.xxx.144.1
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Updating IP xxx.xxx.144.55 ===> xxx.xxx.144.55 for AP 00:25:84:90:f7:f0
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0 not allowed to join. Regulatory Domain check failed.
    Allowed regulatory domain:
    802.11bg:-E 802.11a:-E
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 0
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 1
    Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 0
    Seems like the AP is not sending a Country code at all "Invalid country code ()."
    The WLC and AP's are in different countries (Sweden and Belgium), but that has been prepared for in the WLC which accept both.
    Any ideas?

    Solved.
    I had the errormessage from the beginning... But found it to unlikely...
    "Regulatory domain check failed"
    The supplier for our Belgian site has delivered a model of AIR-AP1131AG-N-K9, which is a US version.
    What I need is AIR-AP1131AG-E-K9 for our European sites.
    For you who have run into the same problem, follow this link for more info:
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6087/product_data_sheet0900aecd801b901c.pdf
    Thanks for the assistance.

  • Invalid security code?

    I have bought about 12 games off the app store, but now it asks me to sign in my billing info, the only thing that was giving me problems was the security code, it constantly tells me "Invalid security code" and it's the right one, I know where it is on my visa, I've tried to see if my purchase history is screwed up somehow, but doesn't let the purchase history load, or tell me what's wrong. This is a really irritating problem, and I hope to see if anyone knows about what I'm talking about.

    I'm the same issue as well!! Just got my iPod on Friday, so I'm new to all this--but I can tell you the card I used initially was working just fine then. Wasn't until just yesterday that suddenly I had an "unpaid balance" and when I tried to reenter my card number, that was when I got the invalid sec. code error. Even tried a couple of other cards, and still the same error.

  • Invalid security code for iphone 4

    I'm not sure if I am posting in the correct area of this page but oh well. I recently received a iphone 4 from my husband. And after having the phone for one week, I could not download any apps to my phone because of billing info or invalid security code. Here's what worked for me. If you do not have any money on the card, it will continue to display invalid security code.  Hope this helps. Good luck!!!

    I'm having the same issue. But why the **** is it all of a sudden requiring a legitimate credit card just to download FREE apps? Or even UPDATE free apps??

  • Invalid Security Code for my valid debit card?

    Really!!!! I guess poor people like me who spend so much money on the **** device first of all (iPhone) and the **** phone bill, have a limit to purchasing "FREE" apps from the app store because apparently, now my apple ID won't accept my debit card information! INVALID SECURITY CODE!!! -____-
    Tried to to work around this stupid obstacle. 1000 times maybe. Tried using my Husband's debit card, my siblings credit card...NOTHING. Still, my apple ID didn't want to accept the info. WHAT TO DO, WHAT TO DO. Not like my whole life revolves around buying apps from the app store via Iphone, its just...THATS WHAT I BOUGHT THE **** PHONE FOR, the benefits...the whole shabang!
    So I discoverved that I could make a new apple ID. How convenient it was for me to make a new email address - a valid one, and make a new apple ID. I scored! GENIUS. The option isnt there though. You need to sign out of your current apple ID and then the option tabs pop up. SMART MOVE. smart *** move.

    Sasha,
         You'll need to contact your bank and make sure that your name and billing address match EXACTLY with the name and billing address on your iTunes account, and if they don't then you'll need to update that information on your iTunes account.  If they don't match then you're eventually going to have the same problem with your new Apple ID.

  • When I tried updating my apps it says invalid security code for my credit card.

    Basically when I try updating an app it says to login. Ok say once I log in it makes me update billing info. When I put my cc info in (which has a 0$ balance) it says invalid security code. This is complete ********, I can't even download FREE apps OR update the ones I have. Im considering going back to android. This is ridiculous.

    you cannot place a card on the account that has no balance to it...
    you can hit the "None" option if you owe nothing to the itunes store
    iTunes Store: My credit card's security code or zip code does not ...

  • HT204266 How come my credit card says invalid security code when I put my code in at the App Store?

    How come my credit card says invalid security code when I put my code in at the App Store? I have a bunch of free apps when I had my ipad 1 now I have 2 and my credit card will not be read as authentic Watson ever I tried my girls card nothing do I need to have money on it for a free download? I even bought a couple of games but why with so many free ones? Please help me I'm slow so walkit through with me thnx also my ipad 2 is brand new out da box and I accidentally updated to 6.0 without finding out first about it so some pointers to it would help ...which I think that it has something to do with it.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    For iOS I would expect an updated version of the manual to appear here at some point : http://support.apple.com/manuals/ipad/
    In the meantime there is this : http://www.apple.com/ios/whats-new/

  • My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

    my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

    To change asccount information see:
    Changing Account Information
    For the code issue this may help.
    iTunes Store: My credit card's security code or zip code does not match my bank's records
    For a standard iTunes account you need a valid payment method even for free apps and app updates.
    What is making it think that you own money for an app upgrade?

  • Adobe Print Form Error - Invalid Response Code: (401) Unauthorized

    Hi, I've just configured ADS on Netweaver 2004s. I've run through the config guide and everything works ok including the form generation test report FP_TEST_00 which outputs PDF without issue. I have two problems:
    -When I run a "test connection" on the RFC destination 'ADS' using the ADSUSER for the login details, I get a 403 not authorized error. Changing this user to J2EE_ADMIN resolves the issue and I get a 302 redirect. I've tried adding other permissions to the ADSUSER without any luck.
    -Running a report on the Portal under e.g. Executive Reporting and attempting to just right-click and hit "Print Version" results in a 401 error for request "http://hostXX:portXX/AdobeDocumentServices/Config?style=document" exactly as per this thread: Re: Adobe Form Creation Error - Invalid Response Code: (401) Unauthorized. However, I've double-checked all user details in Visual Administrator (ADS_AGENT) and on the ABAP stack side in su01 and sm59. I also tried changing the users to dialog with no effect. If I go directly to that URL and log in with ADSUSER I get a 403 not authorised error (using J2EE_ADMIN is again successful). I've noticed that in the http access log the HTTP protocol used is 1.1 when using the web browser and 1.0 when using the sm59 connection test. I've heard of problems with using HTTP/1.1, but when I change the options on IE8 to use HTTP/1.0, it changes for all other requests except the request for "http://hostXX:portXX/AdobeDocumentServices/Config?style=document", which is still submitted as HTTP/1.1. Conversely, in sm59 if I specify that it should use HTTP/1.1 under Special Options, I can see from the access log that it is in fact still using HTTP/1.0. Could this be related to the 401 error code that I'm seeing?
    Any help would be appreciated. Thanks,
    John

    I think I've ruled out the HTTP protocol version as being an issue here. However I may have found more useful information on the actual issue.
    In the security log under usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\log\system I see a different message for the unsuccessful report PDF generation attempt to that of a direct query to the same URL with the same web browser, as below. The unsuccessful attempt appears to forget the ADSUSER credentials and resort to the default J2EE_GUEST which has no authorisations and therefore fails. The direct query doesn't lose the ADSUSER credentials and I think this is because it prompts for the user/password when needed. Does anyone know why this happens for a direct query to this URL but not for the PDF generation attempt?
    Resulting logs from unsuccessful PDF generation attempt:
    #1.5 #005056AF1EB300750000002D0000142000048B4D2208F055#1279063306899#/System/Security/WS/SecurityProtocol#sap.com/irj#com.sap.security.core.client.ws.AuthenticationContext.setDestination#AICL0001#622##<host>_<sid>_3576650#AICL0001#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_5##0#0#Info#1#com.sap.security.core.client.ws.AuthenticationContext#Java###An destination was set with the following properties:
    {0}.#1#{PROXY_ENABLED=false, CLIENT_AUTHENTICATION_KEYSTORE_VIEW=, SAP_SID=, SLD_URL=, USERNAME=ADSUSER, SLD_WS_NAME=, URL=http://<host>:50000/AdobeDocumentServices/Config?style=document, PROXY_URL=, SSL_SERVER_AUTHENTICATION=IGNORE, SLD_WS_SYSTEM_NAME=, PASSWORD=XXX, SLD_WS_PORT=, SAP_CLIENT=, DEFAULT_URL=http://localhost:50000/AdobeDocumentServices/Config?style=document, Authentication=BASIC, CLIENT_AUTHENTICATION_KEYSTORE_CERTIFICATE=, URL_CHOICE=Custom, SAP_LANGUAGE=}#
    #1.5 #005056AF1EB30072000000250000142000048B4D220A12ED#1279063306977#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##<host>_<sid>_3576650#Guest#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_24##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          exception             true       Authentication did not succeed.#
    Successful direct access of URL http://<host>:50000/AdobeDocumentServices/Config?style=document (click on rpData test and manually log in as ADSUSER):
    #1.5 #005056AF1EB30070000000250000142000048B4D3E260016#1279063778670#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#ADSUSER#675##<host>_<sid>_3576650#Guest#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
    User: ADSUSER
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          true       true                 
    Central Checks                                                                                true                  #
    #1.5 #005056AF1EB30070000000260000142000048B4D3E2666A6#1279063778702#/System/Security/Audit/J2EE##com.sap.engine.services.security.roles.audit#ADSUSER#675##<host>_<sid>_3576650#ADSUSER#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.roles.audit#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}].#3#ACCESS.OK#SAP-J2EE-Engine#all#

Maybe you are looking for