Re: IP Overlapping on 6509

All,
I am trying to apply an ip on a sub vlan interface and I am recieving an error "ip overlap error? Is there an additional function I need to enable?
thx

the address 10.10.10.112/24 is overlapping with 10.10.10.111/24.
both of these addresses reside on the same network, 10.10.10.0/24.
you cannot configure two router interfaces with the same network (aka subnet)
try to configure vlan711 as 10.10.11.112/24. this should work as you now have different subnets/networks defined.
(of course, if you have 10.10.11.0/24 network defined elsewhere, this will still be a problem)

Similar Messages

  • Using VRF-Lite in 6509 as Really Expensive IPS ByPass

    I have an IPS (Intrustion Prevention) unit that is causing me some problems with some of my servers in my ServerFarm. I would like to route most of my to/from ServerFarm traffic through the IPS, but use some policy-based routing with an ACL (preferably, a policy-based ACL) to allow some servers to bypass the IPS.
    So, I thought of taking my Cisco 6509 and making it into a Really Expensive Optical ByPass switch for this small group of servers. The challenge is that the IPS runs strictly at Layer 2. So if I connect the IPS in a loop to the 6509, I must change the MAC addresses on these interfaces on the 6509 so that each address is unique -- as well as assign unique IPs to each of the two interfaces, but the addresses must share the same L3 subnet. Of course, this leads to overlapping addresses on the 6509, which it does not like. So, I want to see if I can try a little VRF-lite to remove the overlapping address problem.
    To accomplish the bypass segment, I take a piece of fiber and just connect two ports together on the 6509, changing the MAC addresses and assigning the "overlapping" IPs (which is "solved" by placing the different ports in different VRFs, on just one port in the Global table and the other port in a standalone VRF). If I can do this without running this piece of fiber, I'd be welcome to the idea.
    I can fire up OSPF on all of my interfaces, raising the cost of the IPS Bypass link, and use the route-maps to try to route the Bypass traffic correctly. Unfortunately, the route-maps are not behaving. The traffic moves across the two links (one with IPS, one without) assymetrically, which isn't what I want.
    I am uploading a diagram that will show a simplified example of what I am doing. Here is my config below. Does anyone have any ideas on what I am doing wrong, or a better way to do this? (I tried a VACL approach, but I could not redirect the traffic properly):
    ip vrf Srv
    description ServerNets
    rd 65000:10
    object-group ip address IPS-Ignore
    host 192.168.20.2
    interface GigabitEthernet1/3
    ip address 192.168.200.1 255.255.255.0
    ip policy route-map ServerNetIngress
    interface GigabitEthernet1/9
    description ServerNets
    no ip address
    ip flow ingress
    interface GigabitEthernet1/9.20
    description PublicServerNet
    encapsulation dot1Q 20
    ip vrf forwarding Srv
    ip address 192.168.20.1 255.255.255.128
    ip flow ingress
    ip policy route-map ServerNetEgress
    interface GigabitEthernet1/15
    description IPS-ByPass-Global
    mac-address 0015.c7c9.c10f
    ip address 192.168.15.73 255.255.255.252
    ip flow ingress
    ip ospf cost 100
    interface GigabitEthernet1/17
    description IPS-ByPass-Srv-VRF
    mac-address 0015.c7c9.c111
    ip vrf forwarding Srv
    ip address 192.168.15.74 255.255.255.252
    ip flow ingress
    ip ospf cost 100
    interface GigabitEthernet1/19
    description IPS-Scrub-Global
    mac-address 0015.c7c9.c113
    ip address 10.0.0.2 255.255.255.252
    ip flow ingress
    interface GigabitEthernet1/21
    description IPS-Scrub-Srv-VRF
    mac-address 0015.c7c9.c115
    ip vrf forwarding Srv
    ip address 10.0.0.1 255.255.255.252
    ip flow ingress
    router ospf 10 vrf Srv
    router-id 192.168.10.1
    log-adjacency-changes
    capability vrf-lite
    network 192.168.0.0 0.0.255.255 area 0
    router ospf 1
    router-id 192.168.0.1
    log-adjacency-changes
    network 192.168.0.0 0.0.255.255 area 0
    ip access-list extended IPS-Bypass
    permit ip addrgroup IPS-Ignore any
    permit ip any addrgroup IPS-Ignore
    route-map ServerNetIngress permit 100
    description ByPassIPS
    match ip address IPS-Bypass
    set global
    set ip next-hop 192.168.15.74 10.0.0.1
    route-map ServerNetEgress permit 100
    description ByPassIPS
    match ip address IPS-Bypass
    set ip vrf Srv next-hop 192.168.15.73 10.0.0.2
    I obfuscated my addresses, so don't let that throw you off too much.
    Clarke Morledge
    College of William and Mary

    Thank you for the suggestion. Just using the "set ip next-hop" in the respective route-map is sufficient and gets the job done. Unfortunately, my problem is more with how the policy-based ACLs (PBACLs) work; i.e. the lines with the object-group syntax in the config. My contact with the TAC tells me that PBACLs are not really supported to do policy-based routing. So because the PBACL is not working correctly all of the time, things don't get matched properly in the route-map for the policy-based route to get correctly applied.
    This is really too bad since the PBACL looks to be a quite handy feature. In my example -- at least in theory -- I should be able to make but one change to the "object-group" in order to properly handle the policy-based routing involving the two different route-maps. Alas, this is not as easy as I hoped for since making changes to the PBACL apparently produces unpredictable results -- and the TAC just tells me that the feature is not supported for what I want to do.

  • How can I fix left pane text overlap in iCal Day view?

    In "Day" view, the items in the left hand (list) pane in iCal are overlapping, obscuring the bottom 1/3 of each line of text. It is as if the table cells are too close together vertically. How do I fix this?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • Overlap, bookmarker or something like this...

    hi,
    i read a lot of ebooks and i've got this question:
    can i mark a overlap or bookmarker (just like in normal books) in adobe so when i close ebook it will open next time exactly where i finished reading recently?
    i'm new so sorry if this thread repeats...

    Look here:
    http://forums.adobe.com/message/3321356#3321356

  • NAT IN CATALYST 6509-HOW TO DO IT?

    Hello friends,
    The LAN CAMPUS is conformed by more than 20 VLANS and all the PCs can go to Internet.
    Now I have a new network cloud and I have to attach that network into my campus.
    To do that, I have a Public IP Pool to do translation.
    But I just need that some IPs (from diferent Vlans)could go to the new Network while keep having connecivity to Internet.
    So my Question is:
    I am not interested in perform Static NAT.
    I wonder if I can NAT a group of IPs (in different subnets) with the Public POOL. i.e: group to group.
    I have a PIX 525. I could do it in that PIX but I think It could be better to do it in the Catalyst 6509. (Because the Pix CPU percentage is High-and sometimes I have problems)
    How can I do NAT in C 6509?
    I am attaching a referecial picture.

    Hi bosalaza:
    yes, I think ACL will help so much...
    Look I need to translate only this IPs:
    172.16.8.56
    172.16.24.85
    172.16.33.95
    172.16.86.56
    172.16.125.81
    172.16.157.89
    To this Public IPs:
    200.xx.45.170
    200.xx.45.171
    200.xx.45.172
    200.xx.45.173
    200.xx.45.174
    200.xx.45.175
    But whitout Static NAT.
    And do it but in the C6509.
    I have no enough experience to perform NAt in C6509.
    Thanks in advance.

  • Awesome systray is not showing all icons, perhaps overlapping widgets?

    I have a problem with my Awesome configuration that results in some of the icons being missing or partially missing from my systray. I suspect this is because of some overlapping, since they are partially hidden. You can see the problem in the top right corner.
    rc.lua:
    -- Standard awesome library
    require("awful")
    require("awful.autofocus")
    require("awful.rules")
    -- Theme handling library
    require("beautiful")
    -- Notification library
    require("naughty")
    --Wiget Library
    require("vicious")
    -- awesoMPD Widget
    --require("awesompd/awesompd")
    -- {{{ Variable definitions
    -- Themes define colours, icons, and wallpapers
    beautiful.init("/usr/share/awesome/themes/blind-alien/theme.lua")
    -- This is used later as the default terminal and editor to run.
    terminal = "urxvt"
    editor = os.getenv("EDITOR") or "vim"
    editor_cmd = terminal .. " -e " .. editor
    -- Enable or disable widgets:
    -- You also have to edit the wiboxes!
    useSysInfo = true
    usePacman = true
    useMpd = true
    useWifi = false
    useNet = true
    useBat = false
    useCpu = true
    useMem = true
    useTemp = false
    -- Widget Settings
    cpuCores = 2 --Number of CPU Cores
    thermalZone = "coretemp.0" --Thermal Zone to read cpu temperature from (check vicious docu)
    thermalData = "core" --Data Source: "proc", "core" or "sys"
    netAdapter = "eth0" --Network adapter to monitor
    wifiAdapter = "wlan0" --Wifi adapter for wifi widget
    pacUpdate = "yaourt -Sy" --Command to update pacman cache
    pacUpgrade = "yaourt -Su" --Command to upgrade system
    networkManager = terminal .. " -e wicd-curses"
    battery = "BAT1" --Battery to monitor
    widthMpd = 420 --Width of MPD widget
    -- Widget update intervals in seconds
    updateCpu = 1
    updatePac = 1801
    updateMpd = 1
    updateWifi = 7
    updateNet = 1
    updateBat = 31
    updateMem = 7
    -- For Dual-Screen setups:
    -- Set "dualScreen" to "2" if you want a different, optimized widget layout for every screen.
    -- If you set it to "-1" it will copy the same widget layout to both screens. (default Awesome behavior)
    dualScreen = -1
    screencount = screen.count()
    -- Default modkey.
    -- Usually, Mod4 is the key with a logo between Control and Alt.
    -- If you do not like this or do not have such a key,
    -- I suggest you to remap Mod4 to another key using xmodmap or other tools.
    -- However, you can use another modifier like Mod1, but it may interact with others.
    modkey = "Mod4"
    -- Table of layouts to cover with awful.layout.inc, order matters.
    layouts =
    awful.layout.suit.tile,
    awful.layout.suit.tile.left,
    awful.layout.suit.tile.bottom,
    awful.layout.suit.tile.top,
    awful.layout.suit.fair,
    awful.layout.suit.fair.horizontal,
    awful.layout.suit.magnifier,
    awful.layout.suit.floating,
    awful.layout.suit.max
    -- {{{ Tags
    -- Define a tag table which will hold all screen tags.
    tags = {
    --names = { "1", "2", "3", "4", "5", "6"},
    --names = { "⌘", "♐", "⌥", "ℵ"},
    --names = { "⠪", "⠫", "⠬", "⠭", "⠮", "⠳"},
    names = { "⠐", "⠡", "⠪", "⠵", "⠻", "⠿" },
    --names = { " ∙", "⠡", "⠲", "⠵", "⠻", "⠿"},
    --names = { " ⠐ ", " ⠡ ", " ⠲ ", " ⠵ ", " ⠾ ", " ⠿ "},
    --names = { "⢷", "⣨", "⡪", "⣌", "⣪", "⡝"},
    layout = {
    layouts[8], layouts[8], layouts[8], layouts[5], layouts[8], layouts[8]
    for s = 1, screencount do
    tags[s] = awful.tag(tags.names, s, tags.layout)
    end
    -- {{{ Menu
    -- Create a laucher widget and a main menu
    myawesomemenu = {
    { "manual", terminal .. " -e man awesome" },
    { "edit config", editor_cmd .. " " .. awful.util.getdir("config") .. "/rc.lua" },
    { "restart WM", awesome.restart },
    { "logout", awesome.quit },
    { "shutdown" , "sudo /sbin/halt -p" },
    { "reboot" , "sudo /sbin/reboot" }
    myinternet = {
    { "Chromium", "chromium" },
    { "Firefox" , "firefox" },
    { "IM" , "pidgin" },
    { "IRC" , "xchat"}
    mymedia = {
    { "Spotify", "spotify" },
    { "Rhythmbox", "rhythmbox" },
    { "ncmpcpp", "urxvt -e ncmpcpp" },
    { "Gnome Mplayer", "gnome-mplayer" },
    { "VLC" , "vlc" }
    mygraphics = {
    { "GIMP" , "gimp" },
    { "Inkscape" , "inkscape" },
    { "Image viewer" , "eog" }
    myoffice = {
    { "Base" , "lobase" },
    { "Calc" , "localc" },
    { "Impress" , "loimpress" },
    { "LibreOffice" , "loffice" },
    { "Writer" , "lowriter" },
    { "Lyx" , "lyx" },
    { "Document viewer" , "evince" }
    mysystem = {
    { "htop" , "urxvt -e htop" },
    { "Partition" , "gksudo gparted" },
    { "Sys mon" , "gnome-system-monitor" }
    myutilities = {
    { "Gedit" , "gedit" },
    { "Virtualbox" , "VirtualBox" },
    { "File Manager" , "nautilus --no-desktop" }
    myplaces = {
    { "Home" , "nautilus --no-desktop /home/johan/" },
    { "Documents" , "nautilus --no-desktop /home/johan/Documents/" },
    { "Downloads" , "nautilus --no-desktop /home/johan/Downloads/" },
    { "Music" , "nautilus --no-desktop /home/johan/Music/" },
    { "Pictures" , "nautilus --no-desktop /home/johan/Pictures/" }
    myserverplaces = {
    { "Server root" , "nautilus --no-desktop /srv/" },
    { "Downloads" , "nautilus --no-desktop /srv/download/" },
    { "Movies" , "nautilus --no-desktop /srv/movies/" },
    { "Tv-Series" , "nautilus --no-desktop /srv/tv-series/" },
    { "Misc" , "nautilus --no-desktop /srv/misc/" }
    mymainmenu = awful.menu({ items = {
    { "Terminal", terminal },
    { "Places" , myplaces },
    { "Server" , myserverplaces },
    { "Internet" , myinternet },
    { "Media" , mymedia },
    { "Graphics" , mygraphics },
    { "Office" , myoffice },
    { "Utilities" , myutilities },
    { "Systools" , mysystem },
    { "Awesome", myawesomemenu }
    mylauncher = awful.widget.launcher({ image = image(beautiful.awesome_icon),
    menu = mymainmenu })
    -- Separators
    bubble = widget({ type = "textbox" })
    spacer = widget({ type = "textbox" })
    space = widget({ type = "textbox" })
    separator = widget({ type = "textbox" })
    bracketl = widget({ type = "textbox" })
    bracketr = widget({ type = "textbox" })
    vertline = widget({ type = "textbox" })
    dash = widget({ type = "textbox" })
    bubble.text = " ∘ "
    spacer.text = " "
    space.text = " "
    --separator.text = "<span font_desc='ClearlyU'> ⡾ </span>"
    separator.text = "] ["
    vertline.text = "|"
    dash.text = "-"
    bracketl.text = "["
    bracketr.text = "]"
    -- Status Labels
    cpuLabel = {}
    for s = 1, cpuCores do
    cpuLabel[s] = widget({ type = "textbox" })
    cpuLabel[s].text = "Core " .. s
    end
    rlabel = widget({ type = "textbox" })
    rlabel.text = "Root:"
    hlabel = widget({ type = "textbox" })
    hlabel.text = "Home:"
    -- WIDGETS --
    -- OS info
    if useSysInfo == true then
    sys = widget({ type = "textbox" })
    vicious.register(sys, vicious.widgets.os, "$1 $2")
    end
    -- Pacman updates
    if usePacman == true then
    -- Widget
    pnoghosticon = widget({ type = "imagebox" })
    pnoghosticon.image = image(beautiful.widget_pacnoghost)
    pnoghosticon.visible = true
    pghosticon = awful.widget.launcher({
    image = beautiful.widget_pacghost,
    command = terminal .. " -e " .. pacUpgrade .. " && echo -e 'vicious.force({ pacup, })' | awesome-client"
    pghosticon.visible = false
    -- Icon
    -- picon = widget({ type = "imagebox" })
    -- picon.image = image(beautiful.widget_pacnew)
    -- Use the Pacman icon as launcher to update the package list (change to fit your package-management system)
    picon = awful.widget.launcher({
    image = beautiful.widget_pacnew,
    command = pacUpdate .. " && echo -e 'vicious.force({ pacup, })' | awesome-client"
    runpicon = awful.widget.launcher({
    image = beautiful.widget_pacman_run,
    command = pacUpdate .. " && echo -e 'vicious.force({ pacup, })' | awesome-client"
    runpicon.visible = false
    pacup = widget({ type = "textbox" })
    vicious.register(pacup, vicious.widgets.pkg,
    function(widget, args)
    local nr = tonumber(args[1])
    if nr ~= 0 then
    pnoghosticon.visible = false
    pghosticon.visible = true
    picon.visible = false
    runpicon.visible = true
    else
    pghosticon.visible = false
    pnoghosticon.visible = true
    runpicon.visible = false
    picon.visible = true
    end
    end, updatePac, "Arch")
    end
    -- MPD Widget
    if useMpd == true then
    -- PLAY, STOP, PREV/NEXT Buttons
    -- requires modification of /usr/share/awesome/lib/awful/widget/launcher.lua
    -- b = util.table.join(w:buttons(), button({}, 1, nil, function () util.spawn(args.command) end))
    -- to:
    -- b = util.table.join(w:buttons(), button({}, 1, nil, function () util.spawn_with_shell(args.command) end))
    music_play = awful.widget.launcher({
    image = beautiful.widget_play,
    command = "mpc toggle && echo -e 'vicious.force({ mpdwidget, })' | awesome-client"
    music_pause = awful.widget.launcher({
    image = beautiful.widget_pause,
    command = "mpc toggle && echo -e 'vicious.force({ mpdwidget, })' | awesome-client"
    music_pause.visible = false
    music_stop = awful.widget.launcher({
    image = beautiful.widget_stop,
    command = "mpc stop && echo -e 'vicious.force({ mpdwidget, })' | awesome-client"
    music_prev = awful.widget.launcher({
    image = beautiful.widget_prev,
    command = "mpc prev && echo -e 'vicious.force({ mpdwidget, })' | awesome-client"
    music_next = awful.widget.launcher({
    image = beautiful.widget_next,
    command = "mpc next && echo -e 'vicious.force({ mpdwidget, })' | awesome-client"
    mpdicon = widget({ type = "imagebox" })
    mpdicon.image = image(beautiful.widget_mpd)
    -- Initialize widget
    mpdwidget = widget({ type = "textbox" })
    --mpdwidget.wrap = "none"
    mpdwidget.width = widthMpd
    --mpdwidget.wrap = "word_char"
    -- Register Widget
    --vicious.register(mpdwidget, vicious.widgets.mpd, "(${state}) : ${Artist} - ${Title} ]", 13)
    -- Set the maximum width of the MPD widget inside the string.format function as "%.<length>s"
    vicious.register(mpdwidget, vicious.widgets.mpd,
    function(widget, args)
    --local maxlength = 85
    local font = beautiful.font
    local string = args["{Artist}"] .. " - " .. args["{Title}"]
    --local string = "[" .. args["{state}"] .. "]" .. " : " .. args["{Artist}"] .. " - " .. args["{Title}"]
    --[[ if maxlength < string.len(string) then
    return "<span font_desc='" .. font .. "'>" .. string.sub(string, 0, maxlength-6) .. "</span> ..."
    else
    return "<span font_desc='" .. font .. "'>" .. string .. "</span>"
    end]]
    if args["{state}"] == "Play" then
    music_play.visible = false
    music_pause.visible = true
    else
    music_play.visible = true
    music_pause.visible = false
    end
    return string
    end, updateMpd)
    end
    ---- WIFI Widget
    --if useWifi == true then
    -- wifiwidget = widget({ type = "textbox" })
    -- wifiwidget.width = 22
    -- wifiwidget.align = "right"
    -- --wifiimage = widget({ type = "imagebox" })
    -- wifiimage0 = awful.widget.launcher({
    -- image = beautiful.widget_wifi0,
    -- command = networkManager
    -- wifiimage0.image.visible = true
    -- wifiimage1 = awful.widget.launcher({
    -- image = beautiful.widget_wifi1,
    -- command = networkManager
    -- wifiimage1.image.visible = false
    -- wifiimage2 = awful.widget.launcher({
    -- image = beautiful.widget_wifi2,
    -- command = networkManager
    -- wifiimage2.image.visible = false
    -- wifiimage3 = awful.widget.launcher({
    -- image = beautiful.widget_wifi3,
    -- command = networkManager
    -- wifiimage3.image.visible = false
    -- wifiimage4 = awful.widget.launcher({
    -- image = beautiful.widget_wifi4,
    -- command = networkManager
    -- wifiimage4.image.visible = false
    -- -- Register Widget
    -- -- change to the desired network adapter if needed
    -- --vicious.register(wifiwidget, vicious.widgets.wifi, "~ ${link}%", 5, "wlan0")
    -- vicious.register(wifiwidget, vicious.widgets.wifi,
    -- function(widget, args)
    -- if tonumber(args["{link}"]) > 75 then
    -- wifiimage0.visible = false
    -- wifiimage1.visible = false
    -- wifiimage2.visible = false
    -- wifiimage3.visible = false
    -- wifiimage4.visible = true
    -- elseif tonumber(args["{link}"]) > 50 then
    -- wifiimage0.visible = false
    -- wifiimage1.visible = false
    -- wifiimage2.visible = false
    -- wifiimage3.visible = true
    -- wifiimage4.visible = false
    -- elseif tonumber(args["{link}"]) > 25 then
    -- wifiimage0.visible = false
    -- wifiimage1.visible = false
    -- wifiimage2.visible = true
    -- wifiimage3.visible = false
    -- wifiimage4.visible = false
    -- elseif tonumber(args["{link}"]) > 0 then
    -- wifiimage0.visible = false
    -- wifiimage1.visible = true
    -- wifiimage2.visible = false
    -- wifiimage3.visible = false
    -- wifiimage4.visible = false
    -- else
    -- wifiimage0.visible = true
    -- wifiimage1.visible = false
    -- wifiimage2.visible = false
    -- wifiimage3.visible = false
    -- wifiimage4.visible = false
    -- end
    -- return string.format("%02d%%", tonumber(args["{link}"]))
    -- end, updateWifi, wifiAdapter)
    --end
    -- NETWORK Widget
    if useNet == true then
    dnicon = widget({ type = "imagebox" })
    upicon = widget({ type = "imagebox" })
    dnicon.image = image(beautiful.widget_down)
    upicon.image = image(beautiful.widget_up)
    -- Initialize widget
    netdnwidget = widget({ type = "textbox" })
    netdnwidget.width = 55
    --netdnwidget.align = "right"
    netupwidget = widget({ type = "textbox" })
    netupwidget.width = 55
    --netupwidget.align = "right"
    -- Register widget
    -- change to the desired network adapter if needed
    --vicious.register(netdnwidget, vicious.widgets.net, "${eth0 down_kb} kB/s", 1)
    --vicious.register(netupwidget, vicious.widgets.net, "${eth0 up_kb} kB/s", 1)
    -- The following code formats the output to fill with zeroes at the beginning i.e. 013 kB/s instead of 13 kB/s.
    -- It also automatically switches to MB/s if there is more than 999 kB/s
    vicious.register(netdnwidget, vicious.widgets.net,
    function(widget, args)
    if tonumber(args["{" .. netAdapter .. " down_kb}"]) > 999 then
    return string.format("%04.1f MB/s", tonumber(args["{" .. netAdapter .. " down_mb}"]))
    else
    return string.format("%03d kB/s", tonumber(args["{" .. netAdapter .. " down_kb}"]))
    end
    end, updateNet)
    vicious.register(netupwidget, vicious.widgets.net,
    function(widget, args)
    if tonumber(args["{" .. netAdapter .. " up_kb}"]) > 999 then
    return string.format("%04.1f MB/s", tonumber(args["{" .. netAdapter .. " up_mb}"]))
    else
    return string.format("%03d kB/s", tonumber(args["{" .. netAdapter .. " up_kb}"]))
    end
    end, updateNet)
    end
    ---- BATTERY widget
    --if useBat == true then
    -- baticon = widget({ type = "imagebox" })
    -- --baticon.image = image(beautiful.widget_batfull)
    -- --Initialize widget
    -- batwidget = widget({ type = "textbox" })
    -- batwidget.width = 22
    -- batwidget.align = "right"
    -- --Register widget
    -- --vicious.register(batwidget, vicious.widgets.bat, "$1$2", 31, "BAT1")
    -- vicious.register(batwidget, vicious.widgets.bat,
    -- function(widget, args)
    -- if string.match(args[1], "[+↯]") then
    -- baticon.image = image(beautiful.widget_ac)
    -- elseif tonumber(args[2]) > 40 then
    -- baticon.image = image(beautiful.widget_batfull)
    -- elseif tonumber(args[2]) > 20 then
    -- baticon.image = image(beautiful.widget_batlow)
    -- else
    -- baticon.image = image(beautiful.widget_batempty)
    -- end
    -- if tonumber(args[2]) == 100 then
    -- return "Full"
    -- end
    -- return args[2] .. "%"
    -- end, updateBat, battery)
    --end
    -- {{{ CPU
    --if useTemp == true then
    -- -- Core Temp
    -- tempwidget = widget({ type = "textbox" })
    -- tempwidget.width = 26
    -- tempwidget.align = "right"
    -- vicious.register(tempwidget, vicious.widgets.thermal, "$1 C", updateCpu, { thermalZone, thermalData })
    -- --vicious.register(tempwidget, vicious.widgets.thermal, "$1°C", 5, { "thermal_zone0", "sys" })
    -- -- Icon
    -- tempicon = widget({ type = "imagebox" })
    -- tempicon.image = image(beautiful.widget_temp)
    --end
    -- Readout
    if useCpu == true then
    -- Icon
    cpuicon = widget({ type = "imagebox" })
    cpuicon.image = image(beautiful.widget_cpu)
    -- Core 1 Meter
    cpubar = {}
    freq = {}
    displayCores = {}
    displayCpu = {}
    for s = 1, cpuCores do
    cpubar[s] = awful.widget.progressbar()
    cpubar[s]:set_width(50)
    cpubar[s]:set_height(6)
    cpubar[s]:set_vertical(false)
    cpubar[s]:set_background_color("#434343")
    --cpubar:set_color(beautiful.fg_normal)
    cpubar[s]:set_gradient_colors({ beautiful.fg_normal, beautiful.fg_normal, beautiful.fg_normal, beautiful.bar })
    --Delete the following line if you want to put the widget on the left side of the wibox
    cpubar[s].layout = awful.widget.layout.horizontal.rightleft
    vicious.register(cpubar[s], vicious.widgets.cpu, "$" .. s, updateCpu)
    awful.widget.layout.margins[cpubar[s].widget] = { top = 6 }
    -- Frequency
    freq[s] = widget({ type = "textbox" })
    freq[s].width = 44
    freq[s].align = "right"
    --vicious.register(freq1, vicious.widgets.cpufreq, "$2 GHz", 9, "cpu0")
    vicious.register(freq[s], vicious.widgets.cpufreq,
    function(widget, args)
    return string.format("%03.1f GHz", args[2])
    end, updateCpu, "cpu" .. s - 1)
    -- Cache that shit
    vicious.cache(vicious.widgets.cpu)
    end
    end
    -- }}} CPU
    -- {{{ MEM
    if useMem == true then
    -- Icon
    memicon = widget({ type = "imagebox" })
    memicon.image = image(beautiful.widget_mem)
    -- Percentage
    --mem = widget({ type = "textbox" })
    --vicious.register(mem, vicious.widgets.mem, "$1%")
    -- Meter
    membar = awful.widget.progressbar()
    membar:set_width(50)
    membar:set_height(6)
    membar:set_vertical(false)
    membar:set_background_color("#434343")
    --membar:set_color(beautiful.fg_normal )
    membar:set_gradient_colors({ beautiful.fg_normal, beautiful.fg_normal, beautiful.fg_normal, beautiful.bar })
    --This bar should be placed on the right side of the wibox unless
    --it's a dual-screen config in which case the default (leftright)
    --layout is used... change that if you need!
    if screencount ~= dualScreen then
    membar.layout = awful.widget.layout.horizontal.rightleft
    end
    --Register the widget
    vicious.register(membar, vicious.widgets.mem, "$1", updateMem)
    -- Align progressbars
    awful.widget.layout.margins[membar.widget] = { top = 6 }
    -- MEM Usage
    --mem_total = widget({ type = "textbox" })
    --vicious.register(mem_total, vicious.widgets.mem, "$3 MB", 9)
    --mem_used = widget({ type = "textbox" })
    --vicious.register(mem_total, vicious.widgets.mem, "$2 MB", 9,)
    -- Cache that shit
    vicious.cache(vicious.widgets.mem)
    end
    -- }}} MEM
    -- Create a textclock widget
    mytextclock = awful.widget.textclock({ align = "right" }, "%H:%M")
    awful.widget.layout.margins[mytextclock] = { top = -1 }
    -- Create a systray
    mysystray = widget({ type = "systray"})
    -- Create a wibox for each screen and add it
    mywibox = {}
    mybottomwibox = {}
    mypromptbox = {}
    mylayoutbox = {}
    mytaglist = {}
    mytaglist.buttons = awful.util.table.join(awful.button({}, 1, awful.tag.viewonly),
    awful.button({ modkey }, 1, awful.client.movetotag),
    awful.button({}, 3, awful.tag.viewtoggle),
    awful.button({ modkey }, 3, awful.client.toggletag),
    awful.button({}, 4, awful.tag.viewnext),
    awful.button({}, 5, awful.tag.viewprev))
    mytasklist = {}
    mytasklist.buttons = awful.util.table.join(awful.button({}, 1, function(c)
    if not c:isvisible() then
    awful.tag.viewonly(c:tags()[1])
    end
    client.focus = c
    c:raise()
    end),
    awful.button({}, 3, function()
    if instance then
    instance:hide()
    instance = nil
    else
    instance = awful.menu.clients({ width = 250 })
    end
    end),
    awful.button({}, 4, function()
    awful.client.focus.byidx(1)
    if client.focus then client.focus:raise() end
    end),
    awful.button({}, 5, function()
    awful.client.focus.byidx(-1)
    if client.focus then client.focus:raise() end
    end))
    for s = 1, screencount do
    -- Set a screen margin for borders
    awful.screen.padding(screen[s], { top = 0 })
    -- Create a promptbox for each screen
    mypromptbox[s] = awful.widget.prompt()
    -- Create an imagebox widget which will contains an icon indicating which layout we're using.
    -- We need one layoutbox per screen.
    mylayoutbox[s] = awful.widget.layoutbox(s)
    mylayoutbox[s]:buttons(awful.util.table.join(awful.button({}, 1, function() awful.layout.inc(layouts, 1) end),
    awful.button({}, 3, function() awful.layout.inc(layouts, -1) end),
    awful.button({}, 4, function() awful.layout.inc(layouts, 1) end),
    awful.button({}, 5, function() awful.layout.inc(layouts, -1) end)))
    mylayoutbox[s].resize = false
    -- Create a taglist widget
    mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.label.all, mytaglist.buttons)
    awful.widget.layout.margins[mytaglist[s]] = { top = -2 }
    -- WARNING: In order to properly view the tasklist some lua files have been modified. For the
    -- tasklist_floating_icon icon to be placed on the left side of the task name instead of the
    -- right alignment, /usr/share/awesome/lib/awful/widget/tasklist.lua in function new(label, buttons) the
    -- variable widgets.textbox has to be modified like this:
    -- remove bg_align = "right" and
    -- modify the left margin from 2 to icon width + 2 (i.e.: 18).
    -- Create a tasklist widget
    mytasklist[s] = awful.widget.tasklist(function(c)
    return awful.widget.tasklist.label.currenttags(c, s,
    -- WARNING: Requires modified /usr/share/awesome/lib/awful/widget/tasklist.lua !!!
    -- This basically hides the application icons on the tasklist. If you don't want this or
    -- prefer not to change your tasklist.lua remove the following line!
    { hide_icon = true })
    end, mytasklist.buttons)
    awful.widget.layout.margins[mytasklist[s]] = { top = 2 }
    -- WIBOXES --
    -- Here we create the wiboxes if it's not a dual-screen layout
    if screencount ~= dualScreen then
    -- Create the wibox
    mywibox[s] = awful.wibox({ position = "top", screen = s, border_width = 0, height = 18 })
    -- Add widgets to the wibox - order matters
    mywibox[s].widgets = {
    mytaglist[s],
    mypromptbox[s],
    displaySysInfo,
    layout = awful.widget.layout.horizontal.leftright
    mytextclock,
    mylayoutbox[s],
    s == 1 and mysystray or nil,
    mytasklist[s],
    layout = awful.widget.layout.horizontal.rightleft
    mybottomwibox[s] = awful.wibox({ position = "bottom", screen = s, border_width = 0, height = 18 })
    mybottomwibox[s].widgets = {
    space, music_play, music_pause, music_stop, music_prev, music_next, space, mpdwidget,
    layout = awful.widget.layout.horizontal.leftright
    spacer,
    bracketr,
    -- spacer, batwidget, spacer, baticon, spacer,
    -- separator,
    -- spacer, wifiwidget, spacer, wifiimage0, wifiimage1, wifiimage2, wifiimage3, wifiimage4, spacer,
    -- separator,
    -- spacer, tempwidget, spacer, tempicon, spacer,
    -- separator,
    spacer, freq[1], spacer, cpubar[1], spacer,
    --cpuLabel[1], spacer,
    cpuicon, spacer,
    separator,
    spacer, membar, spacer, memicon, spacer,
    separator,
    spacer, netupwidget, spacer, upicon, spacer, separator, spacer, netdnwidget, spacer, dnicon, spacer,
    separator,
    space, pghosticon, pnoghosticon, runpicon, picon, space,
    bracketl,
    layout = awful.widget.layout.horizontal.rightleft
    end
    end
    if screencount == dualScreen then
    -- Here we create the wiboxes if it is a dual screen configuration:
    mywibox[1] = awful.wibox({ position = "top", screen = 1, border_width = 0, height = 18 })
    -- Add widgets to the wibox - order matters
    mywibox[1].widgets = {
    mytaglist[1],
    spacer,
    mypromptbox[1],
    mytasklist[1],
    layout = awful.widget.layout.horizontal.leftright
    spacer,
    mytextclock,
    -- spacer,
    mylayoutbox[1],
    -- spacer,
    -- mytasklist[1],
    layout = awful.widget.layout.horizontal.rightleft
    mybottomwibox[1] = awful.wibox({ position = "bottom", screen = 1, border_width = 0, height = 18 })
    mybottomwibox[1].widgets = {
    space, music_play, music_pause, music_stop, music_prev, music_next, space, mpdwidget,
    layout = awful.widget.layout.horizontal.leftright
    space,
    s == 1 and mysystray or nil,
    layout = awful.widget.layout.horizontal.rightleft
    mywibox[2] = awful.wibox({ position = "top", screen = 2, border_width = 0, height = 18 })
    mywibox[2].widgets = {
    space,
    mytaglist[2],
    spacer,
    mypromptbox[2],
    layout = awful.widget.layout.horizontal.leftright
    spacer,
    mytextclock,
    space,
    mylayoutbox[2],
    spacer,
    mytasklist[2],
    layout = awful.widget.layout.horizontal.rightleft
    mybottomwibox[2] = awful.wibox({ position = "bottom", screen = 2, border_width = 0, height = 18 })
    mybottomwibox[2].widgets = {
    spacer,
    bracketl,
    spacer, sys, spacer,
    separator,
    space, runpicon, picon, pghosticon, pnoghosticon, space,
    separator,
    spacer, dnicon, spacer, netdnwidget, spacer, separator, spacer, upicon, spacer, netupwidget, spacer,
    separator,
    spacer, memicon, spacer, membar, spacer,
    bracketr,
    layout = awful.widget.layout.horizontal.leftright
    spacer,
    bracketr,
    spacer, tempwidget, spacer, tempicon, spacer,
    separator,
    spacer, freq[2], spacer, cpubar[2], spacer,
    cpuLabel[2], spacer,
    cpuicon, spacer,
    separator,
    spacer, freq[1], spacer, cpubar[1], spacer,
    cpuLabel[1], spacer,
    cpuicon, spacer,
    bracketl,
    layout = awful.widget.layout.horizontal.rightleft
    end
    -- {{{ Mouse bindings
    root.buttons(awful.util.table.join(awful.button({}, 3, function() mymainmenu:toggle() end),
    awful.button({}, 4, awful.tag.viewnext),
    awful.button({}, 5, awful.tag.viewprev)))
    -- {{{ Key bindings
    globalkeys = awful.util.table.join(awful.key({ modkey, }, "Left", awful.tag.viewprev),
    awful.key({ }, "Print", function () awful.util.spawn("gnome-screenshot") end),
    awful.key({ modkey, }, "Right", awful.tag.viewnext),
    awful.key({ modkey, }, "Escape", awful.tag.history.restore),
    awful.key({ modkey, }, "j",
    function()
    awful.client.focus.byidx(1)
    if client.focus then client.focus:raise() end
    end),
    awful.key({ modkey, }, "k",
    function()
    awful.client.focus.byidx(-1)
    if client.focus then client.focus:raise() end
    end),
    awful.key({ modkey, }, "w", function() mymainmenu:show({ keygrabber = true }) end),
    --Volume manipulation
    -- awful.key({}, "XF86AudioRaiseVolume", function() awful.util.spawn("amixer set Master 5+") end),
    -- awful.key({}, "XF86AudioLowerVolume", function() awful.util.spawn("amixer set Master 5-") end),
    -- Layout manipulation
    awful.key({ modkey, "Shift" }, "j", function() awful.client.swap.byidx(1) end),
    awful.key({ modkey, "Shift" }, "k", function() awful.client.swap.byidx(-1) end),
    awful.key({ modkey, "Control" }, "j", function() awful.screen.focus_relative(1) end),
    awful.key({ modkey, "Control" }, "k", function() awful.screen.focus_relative(-1) end),
    awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
    awful.key({ modkey, }, "Tab",
    function()
    awful.client.focus.history.previous()
    if client.focus then
    client.focus:raise()
    end
    end),
    -- Standard program
    awful.key({ modkey, }, "Return", function() awful.util.spawn(terminal) end),
    awful.key({ modkey, "Control" }, "r", awesome.restart),
    awful.key({ modkey, "Shift" }, "q", awesome.quit),
    awful.key({ modkey, }, "l", function() awful.tag.incmwfact(0.05) end),
    awful.key({ modkey, }, "h", function() awful.tag.incmwfact(-0.05) end),
    awful.key({ modkey, "Shift" }, "h", function() awful.tag.incnmaster(1) end),
    awful.key({ modkey, "Shift" }, "l", function() awful.tag.incnmaster(-1) end),
    awful.key({ modkey, "Control" }, "h", function() awful.tag.incncol(1) end),
    awful.key({ modkey, "Control" }, "l", function() awful.tag.incncol(-1) end),
    awful.key({ modkey, }, "space", function() awful.layout.inc(layouts, 1) end),
    awful.key({ modkey, "Shift" }, "space", function() awful.layout.inc(layouts, -1) end),
    -- Prompt
    awful.key({ modkey }, "r", function() mypromptbox[mouse.screen]:run() end),
    awful.key({ modkey }, "x",
    function()
    awful.prompt.run({ prompt = "Run Lua code: " },
    mypromptbox[mouse.screen].widget,
    awful.util.eval, nil,
    awful.util.getdir("cache") .. "/history_eval")
    end))
    clientkeys = awful.util.table.join(awful.key({ modkey, }, "f", function(c) c.fullscreen = not c.fullscreen end),
    awful.key({ modkey, }, "q", function(c) c:kill() end),
    awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle),
    awful.key({ modkey, "Control" }, "Return", function(c) c:swap(awful.client.getmaster()) end),
    awful.key({ modkey, }, "o", awful.client.movetoscreen),
    awful.key({ modkey, "Shift" }, "m", function () awful.util.spawn("urxvt -T ncmpcpp -e 'ncmpcpp'") end),
    awful.key({ modkey, "Shift" }, "w", function () awful.util.spawn("chromium") end),
    awful.key({ modkey, }, "b", function () awful.util.spawn("nautilus --no-desktop") end),
    awful.key({ modkey, "Shift" }, "r", function(c) c:redraw() end),
    awful.key({ modkey, }, "t", function(c) c.ontop = not c.ontop end),
    awful.key({ modkey, }, "n", function(c) c.minimized = not c.minimized end),
    awful.key({ modkey, }, "m",
    function(c)
    c.maximized_horizontal = not c.maximized_horizontal
    c.maximized_vertical = not c.maximized_vertical
    end))
    -- Compute the maximum number of digit we need, limited to 9
    keynumber = 0
    for s = 1, screencount do
    keynumber = math.min(9, math.max(#tags[s], keynumber));
    end
    -- Bind all key numbers to tags.
    -- Be careful: we use keycodes to make it works on any keyboard layout.
    -- This should map on the top row of your keyboard, usually 1 to 9.
    for i = 1, keynumber do
    globalkeys = awful.util.table.join(globalkeys,
    awful.key({ modkey }, "#" .. i + 9,
    function()
    local screen = mouse.screen
    if tags[screen][i] then
    awful.tag.viewonly(tags[screen][i])
    end
    end),
    awful.key({ modkey, "Control" }, "#" .. i + 9,
    function()
    local screen = mouse.screen
    if tags[screen][i] then
    awful.tag.viewtoggle(tags[screen][i])
    end
    end),
    awful.key({ modkey, "Shift" }, "#" .. i + 9,
    function()
    if client.focus and tags[client.focus.screen][i] then
    awful.client.movetotag(tags[client.focus.screen][i])
    end
    end),
    awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
    function()
    if client.focus and tags[client.focus.screen][i] then
    awful.client.toggletag(tags[client.focus.screen][i])
    end
    end))
    end
    clientbuttons = awful.util.table.join(awful.button({}, 1, function(c) client.focus = c; c:raise() end),
    awful.button({ modkey }, 1, awful.mouse.client.move),
    awful.button({ modkey }, 3, awful.mouse.client.resize))
    -- Set keys
    root.keys(globalkeys)
    -- {{{ Rules
    awful.rules.rules = {
    -- All clients will match this rule.
    rule = {},
    properties = {
    border_width = beautiful.border_width,
    border_color = beautiful.border_normal,
    size_hints_honor = false,
    focus = true,
    keys = clientkeys,
    buttons = clientbuttons
    rule = { class = "MPlayer" },
    properties = { floating = true }
    rule = { class = "pinentry" },
    properties = { floating = true }
    rule = { class = "gimp" },
    properties = { floating = true }
    { rule = { class = "firefox" },
    properties = { tag = tags[1][2] } },
    { rule = { class = "Chromium" },
    properties = { tag = tags[1][2] } },
    { rule = { class = "Pidgin" },
    properties = { tag = tags[1][3] } },
    { rule = { class = "Xchat" },
    properties = {tag = tags[1][4] } },
    -- Set Firefox to always map on tags number 2 of screen 1.
    -- { rule = { class = "Firefox" },
    -- properties = { tag = tags[1][2] } },
    -- {{{ Signals
    -- Signal function to execute when a new client appears.
    client.add_signal("manage", function(c, startup)
    -- Add a titlebar
    -- awful.titlebar.add(c, { modkey = modkey })
    -- Enable sloppy focus
    c:add_signal("mouse::enter", function(c)
    if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
    and awful.client.focus.filter(c) then
    client.focus = c
    end
    end)
    if not startup then
    -- Set the windows at the slave,
    -- i.e. put it at the end of others instead of setting it master.
    -- awful.client.setslave(c)
    -- Put windows in a smart way, only if they does not set an initial position.
    if not c.size_hints.user_position and not c.size_hints.program_position then
    awful.placement.no_overlap(c)
    awful.placement.no_offscreen(c)
    end
    end
    end)
    client.add_signal("focus", function(c) c.border_color = beautiful.border_focus end)
    client.add_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)
    -- {{{ Tag signal handler - selection
    -- - ASCII tags 1 [2] 3 4...
    -- - start with tag 1 named [1] in tag setup
    for s = 1, screencount do
    for t = 1, #tags[s] do
    tags[s][t]:add_signal("property::selected", function ()
    if tags[s][t].selected then
    tags[s][t].name = "[" .. tags[s][t].name .. "]"
    else--]]
    --tags[s][t].name = tags[s][t].name:gsub("[%[%]]", "")
    --[[ end
    end)
    end
    end
    I have tried to search around for a solution to this, but I am coming up short. Any idea on how to solve this?
    Last edited by kveras (2011-11-21 09:01:47)

    First of all, did you check the wiki and forums? We'll help you, but you have to try to fix it yourself first.
    You will need to provide more info if you want help.
    Did you set up Gnome to force fallback mode?
    Did you look at the Gnome wiki article? There's a few sections that sound like what your looking to do, but the examples are USING OTHER WM's. They still might be able to point you in the right direction.

  • MDI JTable Overlap Area Repaint Problem

    Hi all,
    I have a problem for my application in MDI mode.
    I open many windows (JInternalFrame contain JTable) under JDesktopPane. Some of the windows are overlapping and when they receive update in the table, it seems repaint all of the overlapping windows, not only itself. This make my application performance become poor, slow respond for drap & drop an existing window or open a new window.
    To prove this, i make a simple example for open many simple table and have a thread to update the table's value for every 200 mill second. After i open about 20 windows, the performance become poor again.
    If anyone face the same problem with me and any suggestions to solve the problem ?
    Please help !!!!!
    Following are my sources:
    public class TestMDI extends JFrame {
        private static final long serialVersionUID = 1L;
        private JPanel contentPanel;
        private JDesktopPane desktopPane;
        private JMenuBar menuBar;
        private List<TestPanel> allScreens = new ArrayList<TestPanel>();
        private List<JDialog> freeFloatDialogs = new ArrayList<JDialog>();
        private List<JInternalFrame> mdiInternalFrm = new ArrayList<JInternalFrame>();
        int x = 0;
        int y = 0;
        int index = 0;
        private static int MDI_MODE = 0;
        private static int FREE_FLOAT_MODE = 1;
        private int windowMode = MDI_MODE;
        public TestMDI() {
            init();
        public static void main(String[] args) {
            new TestMDI().show();
        public void init() {
            contentPanel = new JPanel();
            desktopPane = new JDesktopPane();
            desktopPane.setDragMode(JDesktopPane.LIVE_DRAG_MODE);
            desktopPane.setFocusTraversalKeysEnabled(false);
            desktopPane.setFocusTraversalPolicyProvider(false);
            desktopPane.setBorder(null);
            desktopPane.setIgnoreRepaint(true);
            desktopPane.setPreferredSize(new Dimension(1000, 800));
            this.setSize(new Dimension(1000, 800));
            menuBar = new JMenuBar();
            JMenu menu1 = new JMenu("Test");
            JMenuItem menuItem1 = new JMenuItem("Open Lable Screen");
            menuItem1.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    for (int i = 1; i < 4; i++) {
                        final TestJLableScreen screen = new TestJLableScreen("Screen  " + (allScreens.size() + 1));
                        screen.startTime();
                        if (windowMode == MDI_MODE) {
                            JInternalFrame frame = createInternalFram(screen);
                            desktopPane.add(frame);
                            mdiInternalFrm.add(frame);
                            if (allScreens.size() * 60 + 100 < 1000) {
                                x = allScreens.size() * 60;
                                y = 60;
                            } else {
                                x = 60 * index;
                                y = 120;
                                index++;
                            frame.setLocation(x, y);
                            frame.setVisible(true);
                        } else {
                            JDialog dialog = createJDialog(screen);
                            freeFloatDialogs.add(dialog);
                            if (i * 60 + 100 < 1000) {
                                x = i * 60;
                                y = 60;
                            } else {
                                x = 60 * index;
                                y = 120;
                                index++;
                            dialog.setLocation(x, y);
                            dialog.setVisible(true);
                        allScreens.add(screen);
            JMenuItem menuItem2 = new JMenuItem("Open Table Screen");
            menuItem2.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    for (int i = 1; i < 4; i++) {
                        TestTableScreen screen = new TestTableScreen("Screen  " + (allScreens.size() + 1));
                        screen.startTime();
                        if (windowMode == MDI_MODE) {
                            JInternalFrame frame = createInternalFram(screen);
                            desktopPane.add(frame);
                            mdiInternalFrm.add(frame);
                            if (allScreens.size() * 60 + 100 < 1000) {
                                x = allScreens.size() * 60;
                                y = 60;
                            } else {
                                x = 60 * index;
                                y = 120;
                                index++;
                            frame.setLocation(x, y);
                            frame.setVisible(true);
                        } else {
                            JDialog dialog = createJDialog(screen);
                            freeFloatDialogs.add(dialog);
                            if (i * 60 + 100 < 1000) {
                                x = i * 60;
                                y = 60;
                            } else {
                                x = 60 * index;
                                y = 120;
                                index++;
                            dialog.setLocation(x, y);
                            dialog.setVisible(true);
                        allScreens.add(screen);
            menu1.add(menuItem1);
            menu1.add(menuItem2);
            this.setJMenuBar(menuBar);
            this.getJMenuBar().add(menu1);
            this.getJMenuBar().add(createSwitchMenu());
            this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            this.add(desktopPane);
            desktopPane.setDesktopManager(null);
        public JInternalFrame createInternalFram(final TestPanel panel) {
            final CustomeInternalFrame internalFrame = new CustomeInternalFrame(panel.getTitle(), true, true, true, true) {
                public void doDefaultCloseAction() {
                    super.doDefaultCloseAction();
                    allScreens.remove(panel);
            internalFrame.setPanel(panel);
            // internalFrame.setOpaque(false);
            internalFrame.setSize(new Dimension(1010, 445));
            internalFrame.add(panel);
            internalFrame.setFocusTraversalKeysEnabled(false);
            internalFrame.setFocusTraversalPolicyProvider(false);
            desktopPane.getDesktopManager();
            // internalFrame.setFocusTraversalKeysEnabled(false);
            internalFrame.setIgnoreRepaint(true);
            return internalFrame;
        public JDialog createJDialog(final TestPanel panel) {
            JDialog dialog = new JDialog(this, panel.getTitle());
            dialog.setSize(new Dimension(1010, 445));
            dialog.add(panel);
            dialog.addWindowListener(new WindowAdapter() {
                public void windowClosing(WindowEvent e) {
                    allScreens.remove(panel);
            return dialog;
        public JMenu createSwitchMenu() {
            JMenu menu = new JMenu("Test2");
            JMenuItem menuItem1 = new JMenuItem("Switch FreeFloat");
            menuItem1.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    windowMode = FREE_FLOAT_MODE;
                    for (JInternalFrame frm : mdiInternalFrm) {
                        frm.setVisible(false);
                        frm.dispose();
                        frm = null;
                    mdiInternalFrm.clear();
                    remove(desktopPane);
                    desktopPane.removeAll();
    //                revalidate();
                    repaint();
                    add(contentPanel);
                    index = 0;
                    for (JDialog dialog : freeFloatDialogs) {
                        dialog.setVisible(false);
                        dialog.dispose();
                        dialog = null;
                    freeFloatDialogs.clear();
                    for (int i = 0; i < allScreens.size(); i++) {
                        JDialog dialog = createJDialog(allScreens.get(i));
                        freeFloatDialogs.add(dialog);
                        if (i * 60 + 100 < 1000) {
                            x = i * 60;
                            y = 60;
                        } else {
                            x = 60 * index;
                            y = 120;
                            index++;
                        dialog.setLocation(x, y);
                        dialog.setVisible(true);
            JMenuItem menuItem2 = new JMenuItem("Switch MDI");
            menuItem2.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    windowMode = MDI_MODE;
                    remove(contentPanel);
                    add(desktopPane);
                    for (int i = 0; i < freeFloatDialogs.size(); i++) {
                        freeFloatDialogs.get(i).setVisible(false);
                        freeFloatDialogs.get(i).dispose();
                    freeFloatDialogs.clear();
    //                revalidate();
                    repaint();
                    for (JInternalFrame frm : mdiInternalFrm) {
                        frm.setVisible(false);
                        frm.dispose();
                        frm = null;
                    mdiInternalFrm.clear();
                    index = 0;
                    for (int i = 0; i < allScreens.size(); i++) {
                        JInternalFrame frame = createInternalFram(allScreens.get(i));
                        desktopPane.add(frame);
                        mdiInternalFrm.add(frame);
                        if (i * 60 + 100 < 1000) {
                            x = i * 60;
                            y = 60;
                        } else {
                            x = 60 * index;
                            y = 120;
                            index++;
                        frame.setLocation(x, y);
                        frame.setVisible(true);
            menu.add(menuItem1);
            menu.add(menuItem2);
            return menu;
    public class TestTableScreen extends TestPanel {
        private static final long serialVersionUID = 1L;
        JTable testTable = new JTable();
        MyTableModel tableModel1 = new MyTableModel(1);
        private boolean notRepaint = false;
        int start = 0;
        JScrollPane scrollPane = new JScrollPane();
        private Timer timmer = new Timer(200, new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                Random indexRandom = new Random();
                final int index = indexRandom.nextInt(50);
                Random valRandom = new Random();
                final int val = valRandom.nextInt(600);
                SwingUtilities.invokeLater(new Runnable() {
                    public void run() {
                        notRepaint = false;
                        TestTableScreen.this.update(index + "|" + val);
        public TestTableScreen(String title) {
            this.title = title;
            init();
            tableModel1.setTabelName(title);
        public void startTime() {
            timmer.start();
        public String getTitle() {
            return title;
        public void update(String updateStr) {
            String[] val = updateStr.split("\\|");
            if (val.length == 2) {
                int index = Integer.valueOf(val[0]);
                List vals = tableModel1.getVector();
                if (vals.size() > index) {
                    vals.set(index, val[1]);
    //                 tableModel1.fireTableRowsUpdated(index, index);
                } else {
                    vals.add(val[1]);
    //                 tableModel1.fireTableRowsUpdated(vals.size() - 1, vals.size() - 1);
                tableModel1.fireTableDataChanged();
        public TableModel getTableModel() {
            return tableModel1;
        public void init() {
            testTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
            testTable.setRowSelectionAllowed(true);
            this.testTable.setModel(tableModel1);
            int[] width = { 160, 80, 45, 98, 60, 88, 87, 88, 80, 70, 88, 80, 75, 87, 87, 41, 88, 82, 75, 68, 69 };
            TableColumnModel columnModel = testTable.getColumnModel();
            for (int i = 0; i < width.length; i++) {
                columnModel.getColumn(i).setPreferredWidth(width[i]);
            testTable.setRowHeight(20);
            tableModel1.fireTableDataChanged();
            this.setLayout(new BorderLayout());
            TableColumnModel columnMode2 = testTable.getColumnModel();
            int[] width2 = { 200 };
            for (int i = 0; i < width2.length; i++) {
                columnMode2.getColumn(i).setPreferredWidth(width2[i]);
            scrollPane.getViewport().add(testTable);
            scrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
            this.add(scrollPane, BorderLayout.CENTER);
        class MyTableModel extends DefaultTableModel {
            public List list = new ArrayList();
            String titles[] = new String[] { "袨怓1", "袨怓2", "袨怓3", "袨怓4", "袨怓5", "袨怓6", "袨怓7", "袨怓8", "袨怓9", "袨怓10", "袨怓11",
                    "袨怓12", "袨怓13", "袨怓14", "袨怓15", "袨怓16", "袨怓17", "袨怓18", "袨怓19", "袨怓20", "袨怓21" };
            String tabelName = "";
            int type_head = 0;
            int type_data = 1;
            int type = 1;
            public MyTableModel(int type) {
                super();
                this.type = type;
                for (int i = 0; i < 50; i++) {
                    list.add(i);
            public void setTabelName(String name) {
                this.tabelName = name;
            public int getRowCount() {
                if (list != null) {
                    return list.size();
                return 0;
            public List getVector() {
                return list;
            public int getColumnCount() {
                if (type == 0) {
                    return 1;
                } else {
                    return titles.length;
            public String getColumnName(int c) {
                if (type == 0) {
                    return "head";
                } else {
                    return titles[c];
            public boolean isCellEditable(int nRow, int nCol) {
                return false;
            public Object getValueAt(int r, int c) {
                if (list.size() == 0) {
                    return null;
                switch (c) {
                default:
                    if (type == 0) {
                        return r + " " + c + "  test ";
                    } else {
                        return list.get(r) + "   " + c;
        public boolean isNotRepaint() {
            return notRepaint;
        public void setNotRepaint(boolean notRepaint) {
            this.notRepaint = notRepaint;
    public class TestPanel extends JPanel {
        protected String title = "";
        protected boolean needRepaint = false;
        protected boolean isFirstOpen = true;
        public String getTitle() {
            return title;
        public void setNeedRepaint(boolean flag) {
            this.needRepaint = flag;
        public boolean isNeedRepaint() {
            return needRepaint;
        public boolean isFirstOpen() {
            return isFirstOpen;
        public void setFirstOpen(boolean isFirstOpen) {
            this.isFirstOpen = isFirstOpen;
    public class TestJLableScreen extends TestPanel {
        private static final long serialVersionUID = 1L;
        private JLabel[] allLables = new JLabel[20];
        private Timer timmer = new Timer(20, new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                Random indexRandom = new Random();
                final int index = indexRandom.nextInt(10);
                Random valRandom = new Random();
                final int val = valRandom.nextInt(600);
                SwingUtilities.invokeLater(new Runnable() {
                    public void run() {
                        TestJLableScreen.this.setNeedRepaint(true);
                        TestJLableScreen.this.update(index + "|" + val);
        public TestJLableScreen(String title) {
            this.title = title;
            init();
        public void startTime() {
            timmer.start();
        public String getTitle() {
            return title;
        public void update(String updateStr) {
            String[] val = updateStr.split("\\|");
            if (val.length == 2) {
                int index = Integer.valueOf(val[0]);
                allLables[index * 2 + 1].setText(val[1]);
        public void init() {
            this.setLayout(new GridLayout(10, 2));
            boolean flag = true;
            for (int i = 0; i < allLables.length; i++) {
                allLables[i] = new JLabel() {
                    // public void setText(String text) {
                    // super.setText(text);
                    // // System.out.println("  setText " + getTitle() + "   ; " + this.getName());
                    public void paint(Graphics g) {
                        super.paint(g);
                        // System.out.println("  paint " + getTitle() + "   ; " + this.getName());
                    // public void repaint() {
                    // super.repaint();
                    // System.out.println("  repaint " + getTitle() + "   ; " + this.getName());
                allLables[i].setName("" + i);
                if (i % 2 == 0) {
                    allLables[i].setText("Name " + i + "  : ");
                } else {
                    allLables[i].setOpaque(true);
                    if (flag) {
                        allLables[i].setBackground(Color.YELLOW);
                        flag = false;
                    } else {
                        allLables[i].setBackground(Color.CYAN);
                        flag = true;
                    allLables[i].setText(i * 8 + "");
            for (int i = 0; i < allLables.length; i++) {
                this.add(allLables[i]);
    public class CustomeInternalFrame extends JInternalFrame {
        protected TestPanel panel;
        public CustomeInternalFrame() {
            this("", false, false, false, false);
        public CustomeInternalFrame(String title) {
            this(title, false, false, false, false);
        public CustomeInternalFrame(String title, boolean resizable) {
            this(title, resizable, false, false, false);
        public CustomeInternalFrame(String title, boolean resizable, boolean closable) {
            this(title, resizable, closable, false, false);
        public CustomeInternalFrame(String title, boolean resizable, boolean closable, boolean maximizable) {
            this(title, resizable, closable, maximizable, false);
        public CustomeInternalFrame(String title, boolean resizable, boolean closable, boolean maximizable,
                boolean iconifiable) {
            super(title, resizable, closable, maximizable, iconifiable);
        public TestPanel getPanel() {
            return panel;
        public void setPanel(TestPanel panel) {
            this.panel = panel;

    i had the same problem with buttons and it seemed that i overlayed my button with something else...
    so check that out first do you put something on that excact place???
    other problem i had was the VAJ one --> VisualAge for Java (terrible program)
    it does strange tricks even when you don't use the drawing tool...
    dunno 2 thoughts i had... check it out...
    SeJo

  • Unity Connection 7 with overlapping extension

    Hello everybody,
    I'm deploying a CUCM 7.1.3 + Unity Connecion 7.1.3 to a customer, and I have a doubt when using overlapping extension. As it's a large environment, he has overlapping extension number in his multiple sites. For example, both SiteA and SiteB have the extension range 8XXX. In CUCM I have configured some translations patterns, so that an user from SiteA should dial 118XXX in order to reach SiteB, and an user in SiteB should dial 218XXX in order to reach site A. And each site has its own line partition to extension numbers. And everything works fine...
    But these users are all in the same Unity Connection Server. So I would have users from SiteA and SiteB with the same extension in Unity Connection, and I can't do that. What I know can do is to configure some partitions from SiteA and SiteB in CUC, and put each subscriber in one partition, right?
    But when a user wants to reach the voice mail to get his messages, how Unity Connection knows from which location is he?
    Please, anyone could advise me how can I proceed with this configuration?
    Thank you!!!

    Hello,
    I workarounded my problem creating multiple VM Profiles, and assigning a diferent Voice Mail Box Mask for each. And in Unity connection I created a alternate extension for each user.
    For example... the extension 6000 from SiteA has the VM Profile VM_SiteA, which has the voicemail box mask 11XXXX. And this user in Connection has the alternate extension 116000. And the extension 6000 from SiteB has the VM Profile VM_SiteB, which has the voicemail box mask 21XXXX, and this user has this number as alternate extension as well (216000)... It works fine like this.
    But actually I haven't tested the MWI... If I have a translation pattern in CUCM that translates 11XXXX to XXXX (in partition from SiteA), and another 21XXXX to XXXX (in partition from SiteB), and configure the MWI extension in Connection to be 11XXXX and 21XXXX, will it work? Have anyone already tested this?
    Thank you very much!!!
    Bruno

  • Site-to-ste VPN with overlapped subnet.

    Hi Friends
    I have to set up site to site VPN with overlapped network ASA 5540 and checkpoint   what is the best parctice to achive tis goal
    Thanks in advance

    It has to be configured on both sides.
    X and Y are unused networks in this example: Site A has to hide 172.16.1.0/24 behind X when communicating to Y, site B has to hide 172.16.1.0/24 behind Y when communicating to X. The users in site A have to use Y as a destination, users in site B have to use X as destination. To make it usable for the users you should include the destinations in the DNS so that they never need the destination-IP.
    On the ASA you describe the communication 172.16.1.0/24 -> Y with an access-list and add that ACL to your static-command. You find an example here:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • ASA 5505: Site-to-Site VPN, NAT (Overlap Subnets)

    Greetings all.  I've searched through the forums and have found some similar situations to mine but nothing specific.  I'm hoping this is an easy fix...  :/
    I volunteer for a non-profit medical facility that has an ASA 5505 (v8.4).  They needed a site-to-site VPN to another facility (a Fortinet w/ 10.10.115.0/24) to securly transfer digital X-Ray images.  Very simple setup... the issue is, my 5505 (192.168.1.x) overlaps with another site-to-site VPN connection on the Fortinet side already.  So...
    The network admin on the Fortinet side assinged me 172.31.1.0/24.  I have established a connection but obviously, cannot route anywhere to the other side.  Anyone have any suggestions here, how I might be able to accomplish this - hopefully with a simple NAT setup?
    Thank you in advance everyone.

    Hello Chris,
    For this scenario you will need to create a Policy-NAT rule and then configure the Interesting Traffic with the translated IP address.
    Basically the NAT configuration will be like this:
    object network Local-net
    subnet 192.168.1.0 255.255.255.0
    object network Translated-net
    subnet 172.31.1.0 255.255.255.0
    object network Fortinet-net
    subnet 10.10.115.0 255.255.255.0
    nat (inside,outside) source static Local-net Translated-net destination static Fortinet-net Fortinet-net
    Obviously, you can change the name of the objects.
    Then in the interesting traffic, the ACL that is apply in the crypto map that defines the VPN traffi, you will need to configure it like this:
    access-list anyname permit ip 172.31.1.0 255.255.255.0 10.10.115.0 255.255.255.0
    This should allow you to pass traffic over this tunnel and it will hide your network behind the network that the Fortinet assigned you.
    Let me know if you have any doubts.
    Daniel Moreno
    Please rate any posts you find useful

  • ASA VPN - Overlapping networks

    Hello.
    I have a problem that I have a small branch with ASA-5505 using the VPN connects to two branches and headquarters, unfortunately, even though I used the crypto-map priority, in this configuration, it does not work.
    I mean, first to move traffic to Lodz network with accurate mask 10.57.0.0/255.255.240.0 and then to the Head Office (Warsaw) network with the overlying network mask Lodz network 10.0.0.0/255.0.0.0
    I also wanted to add that if I configure the same VPN to other networks without overlapping then this work properly, so I know that the problem is related with overlapping.
    How to configure ASA when last network with big mask /8 overlapping with other networks with smaller masks /14 or /20 bits.
    Please find attached diagram and configuration part.
    access-list Wan1_cryptomap extended permit ip object LocalNetworkVPN object VPNRemoteLodz (10.57.0.0 255.255.240.0)
    access-list Wan1_cryptomap_1 extended permit ip object LocalNetworkVPN object VPNRemoteWarszawa (10.0.0.0 255.0.0.0)
    crypto ipsec security-association pmtu-aging infinite
    crypto map Wan1_map 20 match address Wan1_cryptomap
    crypto map Wan1_map 20 set peer 107.x.x.41
    crypto map Wan1_map 20 set ikev1 transform-set ESP-3DES-SHA
    crypto map Wan1_map 600 match address Wan1_cryptomap_1
    crypto map Wan1_map 600 set peer 107.x.x.70
    crypto map Wan1_map 600 set ikev1 transform-set ESP-3DES-SHA
    crypto map Wan1_map interface Wan1
    crypto map Wan1_map interface Wan2
    Thank you.

    Hello, Tomasz Hinz.
    Not sure that this helps but can you try add line:
    access-list Wan1_cryptomap_1 extended deny ip object LocalNetworkVPN object VPNRemoteLodz
    Best Regards.

  • A Problem with VSS in the 6509

    Hello,
    I have a problem with VSS in the 6500, when the switch 1 is active,probably a few months will switchover to switch 2 and switch 1 reload.
    config:
    switch virtual domain 1
     switch mode virtual
     switch 1 priority 110
     switch 2 priority 110
    interface Port-channel1
     description To 6509-B-VSS
     no switchport
     no ip address
     switch virtual link 1
     mls qos trust cos
     no mls qos channel-consistency
    interface Port-channel2
     description 6509-A-VSS
     no switchport
     no ip address
     switch virtual link 2
     mls qos trust cos
     no mls qos channel-consistency
    interface GigabitEthernet1/4/20
     no switchport
     no ip address
     dual-active fast-hello
    interface TenGigabitEthernet1/5/4
     description To 6509-B-VSS
     no switchport
     no ip address
     mls qos trust cos
     channel-group 1 mode on
    interface TenGigabitEthernet1/5/5
     description To 6509-B-VSS
     no switchport
     no ip address
     mls qos trust cos
     channel-group 1 mode on
    interface GigabitEthernet2/4/20
     no switchport
     no ip address
     dual-active fast-hello
    interface TenGigabitEthernet2/5/4
     description To 6509-A-VSS
     no switchport
     no ip address
     mls qos trust cos
     channel-group 2 mode on
    interface TenGigabitEthernet2/5/5
     description To 6509-A-VSS
     no switchport
     no ip address
     mls qos trust cos
     channel-group 2 mode on
    show switch virtual redundancy
                      My Switch Id = 2
                    Peer Switch Id = 1
            Last switchover reason = active unit removed
        Configured Redundancy Mode = sso
         Operating Redundancy Mode = sso
    Switch 2 Slot 5 Processor Information :
            Current Software state = ACTIVE
           Uptime in current state = 5 hours, 24 minutes
                     Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXJ5, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Thu 31-Jan-13 14:30 by prod_rel_team
                              BOOT = sup-bootdisk:/s72033-ipbasek9-mz.122-33.SXJ5.bin,12;
            Configuration register = 0x2102
                      Fabric State = ACTIVE
               Control Plane State = ACTIVE
    Switch 1 Slot 5 Processor Information :
            Current Software state = STANDBY HOT (switchover target)
           Uptime in current state = 5 hours, 18 minutes
                     Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXJ5, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Thu 31-Jan-13 14:30 by prod_rel_team
                              BOOT = sup-bootdisk:/s72033-ipbasek9-mz.122-33.SXJ5.bin,12;
            Configuration register = 0x2102
                      Fabric State = ACTIVE
               Control Plane State = STANDBY
    show log
    Jun 21 11:20:52.742: %VSL-SW2_SPSTBY-5-VSL_CNTRL_LINK:  New VSL Control Link Te2/5/4
    Jun 21 11:20:52.786: %VSLP-SW2_SPSTBY-3-VSLP_LMP_FAIL_REASON: Te2/5/4: Link down
    Jun 21 11:20:52.786: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   Last VSL interface Te2/5/4 went down
    Jun 21 11:20:52.790: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   All VSL links went down while switch is in Standby role
    Jun 21 11:20:52.790: %DUAL_ACTIVE-SW2_SPSTBY-1-VSL_DOWN: VSL is down - switchover, or possible dual-active situation has occurred
    Jun 21 11:20:53.622: %SYS-SW2_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
    Jun 21 11:20:54.678: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
    Jun 21 11:20:54.682: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
    Jun 21 11:20:54.738: %SATVS_IBC-SW2_SP-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP packet: (SA/DA:0x4/0x4, SSAP/DSAP:0x19/0x0, OP/SEQ:0x320/0x8FD9, SIG/INFO:0x1/0x502, eSA:0000.0500.0000)
    Jun 21 11:20:56.490: %SATVS_IBC-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP packet: (SA/DA:0x14/0x4, SSAP/DSAP:0x18/0x0, OP/SEQ:0x19/0x98, SIG/INFO:0x1/0x502, eSA:0000.1500.0000)
    Jun 21 11:21:02.125: %VSDA-SW2_SP-3-LINK_DOWN: Interface Gi2/4/20 is no longer dual-active detection capable
    Jun 21 11:23:27.719: %VSLP-SW2_SP-5-RRP_ROLE_RESOLVED: Role resolved as ACTIVE  by VSLP
    Jun 21 11:23:27.719: %VSL-SW2_SP-5-VSL_CNTRL_LINK:  New VSL Control Link Te2/5/4
    Jun 21 11:23:27.799: %VSLP-SW2_SP-5-VSL_UP:  Ready for control traffic
    Jun 21 11:24:43.346: %PFINIT-SW2_SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router.
    Jun 21 11:25:35.304: %VSLP-SW2_SP-5-VSL_UP:  Ready for data traffic
    Jun 21 11:25:14.946: %C6KPWR-SW1_SPSTBY-4-PSOK: power supply 1 turned on.
    Jun 21 11:25:14.950: %C6KPWR-SW1_SPSTBY-4-PSOK: power supply 2 turned on.
    Jun 21 11:25:16.975: %FABRIC-SW1_SPSTBY-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
    Jun 21 11:25:16.975: %FABRIC-SW1_SPSTBY-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
    Jun 21 11:26:13.738: %SYS-SW1_SPSTBY-5-RESTART: System restarted --
    Jun 21 11:26:20.446: %SYS-SW1_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:01:47 to ensure console debugging output.
    Jun 21 11:26:32.056: %RF-SW2_SP-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)
    Jun 21 11:27:56.962: %SYS-SW1_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:01:24 to ensure console debugging output.
    Jun 21 11:27:53.970: %SYS-DFC4-5-RESTART: System restarted --
    Jun 21 11:28:34.222: %VSDA-SW1_SPSTBY-5-LINK_UP: Interface Gi1/4/20 is now dual-active detection capable
    Jun 21 11:28:36.236: %VSDA-SW2_SP-5-LINK_UP: Interface Gi2/4/20 is now dual-active detection capable
    Best Regard

    hi,
    Information of Last System Crash - SP
    Writing crashinfo to bootflash:crashinfo_SP_20140621-192052-TW 00 07 00 00 00 00 00 00 00 0F 00 00 00 00 00 00 10 D6 0A 06 FD 37 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
    Jun 21 11:19:43.723: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.723: SW1_SP: IPC: Message 504CA554 timed out waiting for Ack
    Jun 21 11:19:43.723: SW1_SP: IPC:  MSG: ptr: 0x504CA554, flags: 0x24100, retries: 8, seq: 0x315E1ED, refcount: 1, rpc_result = 0x0, data_buffer = 0x504104BC, header = 0x8A453C8, data = 0x8A453E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57837, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF38, lo: 0x8A453E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 5E 0A 06 01 01 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
    Jun 21 11:19:43.723: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504CA554, flags: 0x24100, retries: 8, seq: 0x315E1ED, refcount: 1, rpc_result = 0x0, data_buffer = 0x504104BC, header = 0x8A453C8, data = 0x8A453E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57837, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF38, lo: 0x8A453E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 5E 0A 06 01 01 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
    Jun 21 11:19:43.727: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.727: SW1_SP: IPC: Message 4528FE20 timed out waiting for Ack
    Jun 21 11:19:43.727: SW1_SP: IPC:  MSG: ptr: 0x4528FE20, flags: 0x24100, retries: 8, seq: 0x315E1EE, refcount: 1, rpc_result = 0x0, data_buffer = 0x4520B23C, header = 0x8C884C8, data = 0x8C884E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57838, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF39, lo: 0x8C884E8  || DATA: 2C D5 00 01 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 40 0A 06 0A 15 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
    Jun 21 11:19:43.727: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4528FE20, flags: 0x24100, retries: 8, seq: 0x315E1EE, refcount: 1, rpc_result = 0x0, data_buffer = 0x4520B23C, header = 0x8C884C8, data = 0x8C884E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57838, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF39, lo: 0x8C884E8  || DATA: 2C D5 00 01 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 40 0A 06 0A 15 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
    Jun 21 11:19:43.727: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.727: SW1_SP: IPC: Message 4529E380 timed out waiting for Ack
    Jun 21 11:19:43.727: SW1_SP: IPC:  MSG: ptr: 0x4529E380, flags: 0x24100, retries: 8, seq: 0x315E1EF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50418920, header = 0x8A93DC8, data = 0x8A93DE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57839, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3A, lo: 0x8A93DE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 12 00 00 00 00 00 00 08 9E 0A 06 9A 0B 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 16 00 00
    Jun 21 11:19:43.727: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4529E380, flags: 0x24100, retries: 8, seq: 0x315E1EF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50418920, header = 0x8A93DC8, data = 0x8A93DE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57839, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3A, lo: 0x8A93DE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 12 00 00 00 00 00 00 08 9E 0A 06 9A 0B 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 16 00 00
    Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.731: SW1_SP: IPC: Message 45238524 timed out waiting for Ack
    Jun 21 11:19:43.731: SW1_SP: IPC:  MSG: ptr: 0x45238524, flags: 0x24100, retries: 8, seq: 0x315E1F0, refcount: 1, rpc_result = 0x0, data_buffer = 0x50372694, header = 0x8468FC8, data = 0x8468FE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57840, sz: 1332, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3B, lo: 0x8468FE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 03 74 0A 06 FD 4C 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45238524, flags: 0x24100, retries: 8, seq: 0x315E1F0, refcount: 1, rpc_result = 0x0, data_buffer = 0x50372694, header = 0x8468FC8, data = 0x8468FE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57840, sz: 1332, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3B, lo: 0x8468FE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 03 74 0A 06 FD 4C 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.731: SW1_SP: IPC: Message 4524C89C timed out waiting for Ack
    Jun 21 11:19:43.731: SW1_SP: IPC:  MSG: ptr: 0x4524C89C, flags: 0x24100, retries: 6, seq: 0x315E1F1, refcount: 1, rpc_result = 0x0, data_buffer = 0x451B45EC, header = 0x894FCC8, data = 0x894FCE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57841, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFE9, lo: 0x894FCE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
    Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4524C89C, flags: 0x24100, retries: 6, seq: 0x315E1F1, refcount: 1, rpc_result = 0x0, data_buffer = 0x451B45EC, header = 0x894FCC8, data = 0x894FCE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57841, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFE9, lo: 0x894FCE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
    Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.731: SW1_SP: IPC: Message 45268348 timed out waiting for Ack
    Jun 21 11:19:43.731: SW1_SP: IPC:  MSG: ptr: 0x45268348, flags: 0x24100, retries: 6, seq: 0x315E1F2, refcount: 1, rpc_result = 0x0, data_buffer = 0x50462254, header = 0x8D4EFC8, data = 0x8D4EFE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57842, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEA, lo: 0x8D4EFE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 38 00 00 00 00 00 00 26 AB 0A 06 05 41 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 19 00 00
    Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45268348, flags: 0x24100, retries: 6, seq: 0x315E1F2, refcount: 1, rpc_result = 0x0, data_buffer = 0x50462254, header = 0x8D4EFC8, data = 0x8D4EFE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57842, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEA, lo: 0x8D4EFE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 38 00 00 00 00 00 00 26 AB 0A 06 05 41 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 19 00 00
    Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.735: SW1_SP: IPC: Message 45281D58 timed out waiting for Ack
    Jun 21 11:19:43.735: SW1_SP: IPC:  MSG: ptr: 0x45281D58, flags: 0x24100, retries: 6, seq: 0x315E1F3, refcount: 1, rpc_result = 0x0, data_buffer = 0x45201860, header = 0x8C2CEC8, data = 0x8C2CEE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57843, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEB, lo: 0x8C2CEE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 B9 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 97 0D 01 04 00 00 00 BB 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.735: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45281D58, flags: 0x24100, retries: 6, seq: 0x315E1F3, refcount: 1, rpc_result = 0x0, data_buffer = 0x45201860, header = 0x8C2CEC8, data = 0x8C2CEE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57843, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEB, lo: 0x8C2CEE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 B9 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 97 0D 01 04 00 00 00 BB 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.735: SW1_SP: IPC: Message 504A2D18 timed out waiting for Ack
    Jun 21 11:19:43.735: SW1_SP: IPC:  MSG: ptr: 0x504A2D18, flags: 0x24100, retries: 6, seq: 0x315E1F4, refcount: 1, rpc_result = 0x0, data_buffer = 0x451F3A88, header = 0x8BA92C8, data = 0x8BA92E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57844, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEC, lo: 0x8BA92E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 01 48 0A 06 FD 2F 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00
    Jun 21 11:19:43.735: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504A2D18, flags: 0x24100, retries: 6, seq: 0x315E1F4, refcount: 1, rpc_result = 0x0, data_buffer = 0x451F3A88, header = 0x8BA92C8, data = 0x8BA92E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57844, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEC, lo: 0x8BA92E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 01 48 0A 06 FD 2F 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00
    Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.735: SW1_SP: IPC: Message 504AA128 timed out waiting for Ack
    Jun 21 11:19:43.735: SW1_SP: IPC:  MSG: ptr: 0x504AA128, flags: 0x24100, retries: 6, seq: 0x315E1F5, refcount: 1, rpc_result = 0x0, data_buffer = 0x45228364, header = 0x8D9C8C8, data = 0x8D9C8E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57845, sz: 568, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFED, lo: 0x8D9C8E8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 26 00 0D 00 10 02 20 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00 00 00 00 00 02 3D 0A 06 FE 6C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 2D 00 00
    Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504AA128, flags: 0x24100, retries: 6, seq: 0x315E1F5, refcount: 1, rpc_result = 0x0, data_buffer = 0x45228364, header = 0x8D9C8C8, data = 0x8D9C8E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57845, sz: 568, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFED, lo: 0x8D9C8E8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 26 00 0D 00 10 02 20 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00 00 00 00 00 02 3D 0A 06 FE 6C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 2D 00 00
    Jun 21 11:19:43.739: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.739: SW1_SP: IPC: Message 504C15B4 timed out waiting for Ack
    Jun 21 11:19:43.739: SW1_SP: IPC:  MSG: ptr: 0x504C15B4, flags: 0x24100, retries: 4, seq: 0x315E1F6, refcount: 1, rpc_result = 0x0, data_buffer = 0x503C193C, header = 0x87593C8, data = 0x87593E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57846, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08B, lo: 0x87593E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 3B 00 00 00 00 00 00 10 A7 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 3B 00 00
    Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504C15B4, flags: 0x24100, retries: 4, seq: 0x315E1F6, refcount: 1, rpc_result = 0x0, data_buffer = 0x503C193C, header = 0x87593C8, data = 0x87593E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57846, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08B, lo: 0x87593E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 3B 00 00 00 00 00 00 10 A7 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 3B 00 00
    Jun 21 11:19:43.739: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.739: SW1_SP: IPC: Message 45273050 timed out waiting for Ack
    Jun 21 11:19:43.739: SW1_SP: IPC:  MSG: ptr: 0x45273050, flags: 0x24100, retries: 4, seq: 0x315E1F7, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044348C, header = 0x8C29BC8, data = 0x8C29BE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57847, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08C, lo: 0x8C29BE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00 00 00 00 00 02 24 0A 06 0C 18 01 04 00 00 00 98 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45273050, flags: 0x24100, retries: 4, seq: 0x315E1F7, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044348C, header = 0x8C29BC8, data = 0x8C29BE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57847, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08C, lo: 0x8C29BE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00 00 00 00 00 02 24 0A 06 0C 18 01 04 00 00 00 98 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.743: SW1_SP: IPC: Message 452A33E4 timed out waiting for Ack
    Jun 21 11:19:43.743: SW1_SP: IPC:  MSG: ptr: 0x452A33E4, flags: 0x24100, retries: 4, seq: 0x315E1F8, refcount: 1, rpc_result = 0x0, data_buffer = 0x50432830, header = 0x8B8A5C8, data = 0x8B8A5E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57848, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08D, lo: 0x8B8A5E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C4 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 A2 0B 01 04 00 00 00 C5 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.743: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452A33E4, flags: 0x24100, retries: 4, seq: 0x315E1F8, refcount: 1, rpc_result = 0x0, data_buffer = 0x50432830, header = 0x8B8A5C8, data = 0x8B8A5E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57848, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08D, lo: 0x8B8A5E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C4 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 A2 0B 01 04 00 00 00 C5 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
    Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.743: SW1_SP: IPC: Message 4523FFA4 timed out waiting for Ack
    Jun 21 11:19:43.743: SW1_SP: IPC:  MSG: ptr: 0x4523FFA4, flags: 0x24100, retries: 4, seq: 0x315E1F9, refcount: 1, rpc_result = 0x0, data_buffer = 0x5036F47C, header = 0x844B3C8, data = 0x844B3E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57849, sz: 772, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08E, lo: 0x844B3E8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 F2 00 0D 00 16 02 EC 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 46 0A 06 FE 5A 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
    Jun 21 11:19:43.743: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4523FFA4, flags: 0x24100, retries: 4, seq: 0x315E1F9, refcount: 1, rpc_result = 0x0, data_buffer = 0x5036F47C, header = 0x844B3C8, data = 0x844B3E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57849, sz: 772, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08E, lo: 0x844B3E8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 F2 00 0D 00 16 02 EC 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 46 0A 06 FE 5A 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
    Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.743: SW1_SP: IPC: Message 45279200 timed out waiting for Ack
    Jun 21 11:19:43.743: SW1_SP: IPC:  MSG: ptr: 0x45279200, flags: 0x24100, retries: 2, seq: 0x315E1FA, refcount: 1, rpc_result = 0x0, data_buffer = 0x5039C3B0, header = 0x85F65C8, data = 0x85F65E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57850, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B123, lo: 0x85F65E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
    Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45279200, flags: 0x24100, retries: 2, seq: 0x315E1FA, refcount: 1, rpc_result = 0x0, data_buffer = 0x5039C3B0, header = 0x85F65C8, data = 0x85F65E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57850, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B123, lo: 0x85F65E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
    Jun 21 11:19:43.747: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.747: SW1_SP: IPC: Message 504D3544 timed out waiting for Ack
    Jun 21 11:19:43.747: SW1_SP: IPC:  MSG: ptr: 0x504D3544, flags: 0x24100, retries: 2, seq: 0x315E1FB, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044AE34, header = 0x8C71FC8, data = 0x8C71FE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57851, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B124, lo: 0x8C71FE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 04 48 0A 06 0B 24 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
    Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504D3544, flags: 0x24100, retries: 2, seq: 0x315E1FB, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044AE34, header = 0x8C71FC8, data = 0x8C71FE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57851, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B124, lo: 0x8C71FE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 04 48 0A 06 0B 24 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
    Jun 21 11:19:43.747: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.747: SW1_SP: IPC: Message 504D5940 timed out waiting for Ack
    Jun 21 11:19:43.747: SW1_SP: IPC:  MSG: ptr: 0x504D5940, flags: 0x24100, retries: 2, seq: 0x315E1FC, refcount: 1, rpc_result = 0x0, data_buffer = 0x4521415C, header = 0x8CDD4C8, data = 0x8CDD4E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57852, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B125, lo: 0x8CDD4E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 0E 6D 0A 06 9C 5C 01 04 00 00 00 BF 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
    Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504D5940, flags: 0x24100, retries: 2, seq: 0x315E1FC, refcount: 1, rpc_result = 0x0, data_buffer = 0x4521415C, header = 0x8CDD4C8, data = 0x8CDD4E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57852, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B125, lo: 0x8CDD4E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 0E 6D 0A 06 9C 5C 01 04 00 00 00 BF 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
    Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.751: SW1_SP: IPC: Message 452989EC timed out waiting for Ack
    Jun 21 11:19:43.751: SW1_SP: IPC:  MSG: ptr: 0x452989EC, flags: 0x24100, retries: 2, seq: 0x315E1FD, refcount: 1, rpc_result = 0x0, data_buffer = 0x45172660, header = 0x86DCEC8, data = 0x86DCEE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57853, sz: 1060, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B126, lo: 0x86DCEE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 3E 0A 06 FE 1D 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 BF 00 00
    Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452989EC, flags: 0x24100, retries: 2, seq: 0x315E1FD, refcount: 1, rpc_result = 0x0, data_buffer = 0x45172660, header = 0x86DCEC8, data = 0x86DCEE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57853, sz: 1060, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B126, lo: 0x86DCEE8  || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 3E 0A 06 FE 1D 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 BF 00 00
    Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.751: SW1_SP: IPC: Message 504C9DAC timed out waiting for Ack
    Jun 21 11:19:43.751: SW1_SP: IPC:  MSG: ptr: 0x504C9DAC, flags: 0x24108, retries: 0, seq: 0x315E1FE, refcount: 1, rpc_result = 0x0, data_buffer = 0x451D3748, header = 0x8A772C8, data = 0x8A772E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57854, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D4, lo: 0x8A772E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 97 00 00
    Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504C9DAC, flags: 0x24108, retries: 0, seq: 0x315E1FE, refcount: 1, rpc_result = 0x0, data_buffer = 0x451D3748, header = 0x8A772C8, data = 0x8A772E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57854, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D4, lo: 0x8A772E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 97 00 00
    Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.751: SW1_SP: IPC: Message 4525926C timed out waiting for Ack
    Jun 21 11:19:43.751: SW1_SP: IPC:  MSG: ptr: 0x4525926C, flags: 0x24108, retries: 0, seq: 0x315E1FF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50405568, header = 0x89DD1C8, data = 0x89DD1E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57855, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D5, lo: 0x89DD1E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 80 0A 06 0B 24 01 04 00 00 00 8A 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
    Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4525926C, flags: 0x24108, retries: 0, seq: 0x315E1FF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50405568, header = 0x89DD1C8, data = 0x89DD1E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57855, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D5, lo: 0x89DD1E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 80 0A 06 0B 24 01 04 00 00 00 8A 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
    Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.755: SW1_SP: IPC: Message 452512E0 timed out waiting for Ack
    Jun 21 11:19:43.755: SW1_SP: IPC:  MSG: ptr: 0x452512E0, flags: 0x24108, retries: 0, seq: 0x315E200, refcount: 1, rpc_result = 0x0, data_buffer = 0x451AF00C, header = 0x891CCC8, data = 0x891CCE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57856, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D6, lo: 0x891CCE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C0 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0B 00 00 00 00 00 00 04 B2 0A 06 9E 0B 01 04 00 00 00 C3 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 17 00 00
    Jun 21 11:19:43.755: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452512E0, flags: 0x24108, retries: 0, seq: 0x315E200, refcount: 1, rpc_result = 0x0, data_buffer = 0x451AF00C, header = 0x891CCC8, data = 0x891CCE8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57856, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D6, lo: 0x891CCE8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C0 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0B 00 00 00 00 00 00 04 B2 0A 06 9E 0B 01 04 00 00 00 C3 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 17 00 00
    Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:43.755: SW1_SP: IPC: Message 504A9C90 timed out waiting for Ack
    Jun 21 11:19:43.755: SW1_SP: IPC:  MSG: ptr: 0x504A9C90, flags: 0x24108, retries: 0, seq: 0x315E201, refcount: 1, rpc_result = 0x0, data_buffer = 0x45158028, header = 0x85E22C8, data = 0x85E22E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57857, sz: 736, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D7, lo: 0x85E22E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 02 D0 00 0D 00 15 02 CA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 03 4E 0A 06 FE 4C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 C2 00 00
    Jun 21 11:19:43.755: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504A9C90, flags: 0x24108, retries: 0, seq: 0x315E201, refcount: 1, rpc_result = 0x0, data_buffer = 0x45158028, header = 0x85E22C8, data = 0x85E22E8  || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57857, sz: 736, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D7, lo: 0x85E22E8  || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 02 D0 00 0D 00 15 02 CA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 03 4E 0A 06 FE 4C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 C2 00 00
    Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:19:52.687: %CPU_MONITOR-SW1_SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 120 seconds [21/1]
    Jun 21 11:20:22.687: %CPU_MONITOR-SW1_SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 150 seconds [21/1]
    Jun 21 11:20:33.175: SW1_SP: IPC: Message 504F68E8 timed out waiting for Ack
    Jun 21 11:20:33.175: SW1_SP: IPC:  MSG: ptr: 0x504F68E8, flags: 0x34101, retries: 21, seq: 0x315AABD, refcount: 2, rpc_result = 0x0, data_buffer = 0x4517147C, header = 0x86D24C8, data = 0x86D24E8  || HDR: src: 0x10000, dst: 0x315000E, index: 1, seq: 43709, sz: 80, type: 1, flags: 0x1404, ext_flags: 0x0, hi: 0xA56AE85, lo: 0x86D24E8  || DATA: 00 00 00 15 00 00 00 00 00 00 07 D1 00 00 00 0A 00 00 00 0C 00 00 00 0F 00 00 00 05 00 00 00 0A 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    Jun 21 11:20:33.175: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504F68E8, flags: 0x34101, retries: 21, seq: 0x315AABD, refcount: 2, rpc_result = 0x0, data_buffer = 0x4517147C, header = 0x86D24C8, data = 0x86D24E8  || HDR: src: 0x10000, dst: 0x315000E, index: 1, seq: 43709, sz: 80, type: 1, flags: 0x1404, ext_flags: 0x0, hi: 0xA56AE85, lo: 0x86D24E8  || DATA: 00 00 00 15 00 00 00 00 00 00 07 D1 00 00 00 0A 00 00 00 0C 00 00 00 0F 00 00 00 05 00 00 00 0A 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    Jun 21 11:20:33.175: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
    Jun 21 11:20:33.179: %C6K_PROCMIB-SW1_SP-3-IPC_TRANSMIT_FAIL: Failed to send process statistics update : error code = timeout
    -Traceback= 40BF9E18 40BF9E68 40BFA070 40BFA2D4 408AAFE8 408AAFD4
    Jun 21 11:20:52.687: %CPU_MONITOR-SW1_SP-3-TIMED_OUT: CPU_MONITOR messages have failed, resetting system [21/1]

  • Delete Overlapping requests question

    Hi ,
    How would a Delete overlapping requests (DOR)type work in a PC to a Cube that gets a full load every day with selections for rolling 12 months?
    Say there is a scenario to load data into an AR line items cube to update open to closed items history and the loads are configured for a 12 month rolling. eg yesterdays full would be for 03/23/09 to 03/23/10
    today's 03/24/09 to 03/24/10
    Now how can we utilize DOR instead in a PC that would delete the doubling behaviour of data for dates 03/24/09 to 03/23/10?
    All thoughts appreciated.
    Thanks

    Hi,
    in The selection criteria of the info package u can have the following code which takes the selection criteria as the first day to last day of the month  based on previous days date(SY-DATUM - 1.)
    data: l_idx  like sy-tabix,
            dDATE1 LIKE SY-DATUM,
            dDATE  LIKE SY-DATUM,
            L_LOW  LIKE RSSDLRANGE-LOW,
            L_HIGH LIKE RSSDLRANGE-HIGH.
      read table l_t_range with key
           fieldname = 'END_SHIFTDATE'.
      l_idx = sy-tabix.
      dDATE1 = SY-DATUM - 1.
      CALL FUNCTION 'ZFNC_FIRSTDAY_MONTH'
        EXPORTING
          DDATE      = dDATE1
        IMPORTING
          DLAST_DATE = dDATE.
      L_LOW         = dDATE.
      L_T_RANGE-LOW = L_LOW.
      L_T_RANGE-SIGN   = 'I'.
      L_T_RANGE-OPTION = 'BT'.
      CLEAR dDATE.
      CALL FUNCTION 'ZFNC_LASTDAY_MONTH'
        EXPORTING
          DDATE      = dDATE1
        IMPORTING
          DLAST_DATE = dDATE.
      L_HIGH         = dDATE.
      L_T_RANGE-HIGH = L_HIGH.
      modify l_t_range index l_idx.
    and DOR deletes the previous day's request as the selection criteria is same. on first day of the next month it has a request with selection criteria as first to last date of the previous month. and this request is not deleted  since on 2nd of the month it has different selection criteria(Start daay and end day of that month)
    Hope its clear
    Thanks,
    Sandeep

  • Can I use JavaScript to force objects to overlap a Web Object in Captivate 7?

    Hi, so I have all of these great ideas for using Web Objects to enhance my courses, but am discouraged by the fact that I can't seem to get anything to overlap a Web Object. The only thing I can seem to get to overlap a Web Object is another Web Object. I have found that buttons seem to still work under the Web Object (which is good) but I really would like to know of a way to allow things on the Captivate timeline to be viewed on top of them. Things like text fields and images.
    I've seen posts about how to use JavaScript to have the menu show above Web Objects, but that code doesn't seem to work for regular objects. I read that Web Objects sit in an "<iframe>" tag and that that forces it to appear above everything else. I'm left wondering if it is possible to get around this by somehow putting Captivate objects in an <iframe> of their own with JavaScript? Or is there some other way? Does anybody know any JavaScript I can apply to Captivate objects to get them to appear above a Web Object?
    Thanks,
    Dan

    So I have come to learn that the "<iframe>" tag for a Web Object is simply a window that sits on top of the course. Now I'm wondering if anyone has an effective method for importing flash quality animation (in whatever form) that can sit underneath of Captivate objects and still be HTML5 compliant?
    Thanks,
    Dan

  • Production order overlapping with purchase orders for outside process

    I set up the overlap option in a router so we can send 50 pieces (total order quantity is 200) of material ahead to an outside heat treat operation.  When we try to create the purchase order for the 50 to be sent out for heat treat two problems occur.
    1. The quatity in the purchase order is for the entire order of 200, not 50.
    2. We get a message "Date /23/2010 period D is not valid.
    We currently do not use the functionality of splits and overlaps so if anyone can help or guide me to a good resource I would appreciate it.
    Regards.
    Gail
    Edited by: Gail Weeks on Nov 12, 2010 4:19 PM
    If anyone could help with this question I'd appreciate it. Thanks.

    Gail:
    the next operation would be an external operation in your order ? That is, has some external Operation Control Key?
    Then the PurReq for this operation is created at creation or release of the production order by the total operation quantity. Ovelapping allows you to reduce some total time in order, but I don think that can be applied for the purpose you describe. Let us know more details about your requirement.
    Regards

Maybe you are looking for

  • Running a java program from an icon

    I want to run my program from an icon on my desktop. I have a .bat file that I've built a shortcut to and it works.MY GUI program does display and run when I click on the icon. The problem is that the DOS window also shows up behind my GUI. Is there

  • HT3702 How do I remove my credit card information on my kids iPhone?

    I'm having trouble removing the credit card information on another phone that I have that my younger son uses . It's not letting him download any apps or use anything that requires his Apple ID . I just want to remove the credit card information and

  • SuperDrive - Archive and Install/Repair Disk/Permissions Unavailable

    Was told by an Apple "Genius" that an Archive and Install would fix the problem I am having with my MBA (shuts down while booting after performing the 10.5.4 update), but that it would take at "least a day or two" for them to fix it so I took it home

  • I cant get Itunes 10 to work

    I started downloading itunes 10 so i could use my new ipod touch once i began the installation i left my computer, when i came back the installer said that the installation had experienced an error i tried reinstalling and have the same issue now i c

  • Issue for running complex insert statement

    Hello expert, I have a complex insert statement in store procedure. when I run this statement in toad, it takes only 1 minute. but when I monitor execution of this procedure, it takes about 2 hours. this insert statement is as " insert into table sel