Re: [iPlanet-JATO] using begin childName Display method
Oops. Sorry about that, Craig. I didn't realize I might leave that impression.
I'm sure the tiled
views work since you have so many examples of these and it's a relatively
simple concept, isn't it?
Not to mention a necessary one. I didn't have time to debug my code and find
out what I was doing
wrong where the tiled views are concerned. I decide to just try to implement
tiled views later and
just stick with one of everything for now and get that working.
Yes, I have reviewed your comments and am taking them into consideration. I am
able to save and
retrieve values with my model at this point.
Thanks.
Belinda
X-eGroups-Return:
sentto-2343287-1143-1008622698-belinda.garcia=sun.com@r...
X-Sender: craig.conover@s...
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4)Gecko/20011019 Netscape6/6.2
X-Accept-Language: en-us
From: "Craig V. Conover" <craig.conover@s...>
X-Yahoo-Profile: cvconover
Mailing-List: list [email protected]; contact
[email protected]
Date: Mon, 17 Dec 2001 13:00:10 -0800
Subject: Re: [iPlanet-JATO] using begin<childName>Display method
Content-Transfer-Encoding: 7bit
Belinda,
He may also be binding the models, howerver, he needs to change the way
the value appears before it is displayed which is why you would use the
display events.
Your null value issue is a completely different issue and has nothing to
do with it being a tiled view. I don't want anyone getting the idea
that the tiledView binding is broken. It does work. You issue should
have something to do with the inconsistent way in which you are getting
your model. At least from what I could tell in your source code that you
sent me.
Have you reviewed my comments I sent to you in your source code?
craig
Belinda Garcia wrote:
I don't currently use a begin or end Display method. I merely bind the
fields to
the model when the child is created and use the setValue to initially setthe
value to what's in the model. I get nulls though if I try to use a tiledView. I
haven't quite got this figured out.
Belinda
X-eGroups-Return:
sentto-2343287-1135-1008613974-belinda.garcia=sun.com@r...
X-Sender: stephen_winer@y...
User-Agent: eGroups-EW/0.82
From: "stephen_winer" <stephen_winer@y...>
X-Originating-IP: 155.188.191.4
X-Yahoo-Profile: stephen_winer
Mailing-List: list [email protected]; contact
[email protected]
Date: Mon, 17 Dec 2001 18:32:48 -0000
Subject: [iPlanet-JATO] using begin<childName>Display method
Content-Transfer-Encoding: 7bit
I want to be able to conditionally show/hide data as well as format
it for display without touching the model. I found the
begin<childName>Display and end<childName>Display methods that
provide the hooks to do this, but I have been unsuccessful in getting
these method to execute. I added the fireChildDisplayEvents="true"
attribute to the jato:useViewBean tag, but this has not helped. I
also added some debug to the ContainerViewBase class in the public
boolean beginChildDisplay(ChildDisplayEvent event) method to see what
was happening. The displayMethodMap was returning null for the child
display methods that were in the view bean. I covered all the bases
(compiling, redeploying, etc.) and nothing has worked. Is there
anything I am missing or is there some working example of this?
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
The hidden field was present in the page, but it looked like this:
<input type="hidden" name="jato.defaultCommand" value=""../search"">
Seems like there is a small bug in the code generating this tag.
FYI - I am using JATO1.2
What file displays this text? Maybe I can go in and fix it and rejar
it.
Steve
--- Mike Frisino wrote:
Steve,
Can you check the HTML source that shows up in the browser? Do you see an entry that looks like this at the bottom of the form in
question?
>
<input type="hidden" name="jato.defaultCommand" value="/search">
To answer your question - it should work as you described. Some of the JatoSample make use of the defaultCommandChild. Can you try
running the sample BasicSample->Field Types and let us know what you
see.
>
Failing this you can send me your jsp file , maybe there is some subtle issue there. michael.frisino@s...
>
>
----- Original Message -----
From: stephen_winer
Sent: Friday, December 07, 2001 8:05 AM
Subject: [iPlanet-JATO] Using the defaultCommandChild in a form
I am trying to set the defaultCommandChild in my jato:form tag to be
the searcg button. The search button definition is:
<jato:button name="search"/>.
The form tag definition is:
<jato:form name="PendingIA" defaultCommandChild="/search">
Clicking on the search button works fine, but hitting return in one
of the textFields (which submits the form) passes a value of "" to
the createChild method in my viewBean, which throws an error. Why
does this not just work as normal and trigger the handleSearchRequest
() method?
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
>
>
>
[Non-text portions of this message have been removed]
Similar Messages
-
Re: [iPlanet-JATO] Re: using begin childName Display method
Steve,
It sounds like you have your display fields in a container view, and
that container view is inside of a view bean. I haven't tested whether
the fireChildDisplayEvents has a "deep" effect on its container view
children. Meaning that you may have to set fireChildDisplayEvents="true"
for the <jato:containerView> tag instead. If all else fails and you need
to just get it working, you can set the fireDisplayEvents="true" for
each display field tag separately.
craig
stephen_winer wrote:
I should clarify my earlier statement. The data I want to display is
coming from a model (tied in in the createChild method). I want to
conditionally reformat the text that is being substituted in the JSP
for a JATO form element, but I want this to happen on the server, not
with JavaScript. The begin<childName>Display and
end<childName>Display methods allow me to do this, in theory, but I
can not get them to execute.
Steve
--- In iPlanet-JATO@y..., Belinda Garcia <belinda.garcia@s...> wrote:
I don't currently use a begin or end Display method. I merely bind
the fields to
the model when the child is created and use the setValue to
initially set the
value to what's in the model. I get nulls though if I try to use a
tiled View. I
haven't quite got this figured out.
Belinda
X-eGroups-Return:
sentto-2343287-1135-1008613974-belinda.garcia=sun.com@r...
X-Sender: stephen_winer@y...
User-Agent: eGroups-EW/0.82
From: "stephen_winer" <stephen_winer@y...>
X-Originating-IP: 155.188.191.4
X-Yahoo-Profile: stephen_winer
Mailing-List: list iPlanet-JATO@y...; contact
iPlanet-JATO-owner@y...
Date: Mon, 17 Dec 2001 18:32:48 -0000
Subject: [iPlanet-JATO] using begin<childName>Display method
Content-Transfer-Encoding: 7bit
I want to be able to conditionally show/hide data as well as
format
it for display without touching the model. I found the
begin<childName>Display and end<childName>Display methods that
provide the hooks to do this, but I have been unsuccessful in
getting
these method to execute. I added the
fireChildDisplayEvents="true"
attribute to the jato:useViewBean tag, but this has not helped.
I
also added some debug to the ContainerViewBase class in the
public
boolean beginChildDisplay(ChildDisplayEvent event) method to see
what
was happening. The displayMethodMap was returning null for the
child
display methods that were in the view bean. I covered all the
bases
(compiling, redeploying, etc.) and nothing has worked. Is there
anything I am missing or is there some working example of this?
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
>For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspThe hidden field was present in the page, but it looked like this:
<input type="hidden" name="jato.defaultCommand" value=""../search"">
Seems like there is a small bug in the code generating this tag.
FYI - I am using JATO1.2
What file displays this text? Maybe I can go in and fix it and rejar
it.
Steve
--- Mike Frisino wrote:
Steve,
Can you check the HTML source that shows up in the browser? Do you see an entry that looks like this at the bottom of the form in
question?
>
<input type="hidden" name="jato.defaultCommand" value="/search">
To answer your question - it should work as you described. Some of the JatoSample make use of the defaultCommandChild. Can you try
running the sample BasicSample->Field Types and let us know what you
see.
>
Failing this you can send me your jsp file , maybe there is some subtle issue there. michael.frisino@s...
>
>
----- Original Message -----
From: stephen_winer
Sent: Friday, December 07, 2001 8:05 AM
Subject: [iPlanet-JATO] Using the defaultCommandChild in a form
I am trying to set the defaultCommandChild in my jato:form tag to be
the searcg button. The search button definition is:
<jato:button name="search"/>.
The form tag definition is:
<jato:form name="PendingIA" defaultCommandChild="/search">
Clicking on the search button works fine, but hitting return in one
of the textFields (which submits the form) passes a value of "" to
the createChild method in my viewBean, which throws an error. Why
does this not just work as normal and trigger the handleSearchRequest
() method?
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
>
>
>
[Non-text portions of this message have been removed] -
Re: [iPlanet-JATO] Use Of models in utility classes
Hi Matt,
Sounds like some of the stuff we need to migrate has a lot in common with
Namburi's project.
I would be very keen to get hold of a copy of the 'tactic' document you
mention below, as well as the sample code you mention to replace CspDBResult
stuff with JDBC results.
Thanks in advance,
Phil
----- Original Message -----
From: Matthew Stevens <matthew.stevens@E...>
Sent: Wednesday, August 08, 2001 7:56 AM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has thedetails
on various tactics of migrating these type of utilities. Essentially, you
either need to convert these utilities to Models themselves or keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of custom helper method
as a replacement whicch uses JDBC results instead of CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100253094145066046167121181">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes. These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do the manipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion for these
utilities we have to do manually.
My question is Can we access the the models in the post migration
sameway or do we need requestContext?
We have lots of utility classes which are DataObject intensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]Hi Matt,
Sounds like some of the stuff we need to migrate has a lot in common with
Namburi's project.
I would be very keen to get hold of a copy of the 'tactic' document you
mention below, as well as the sample code you mention to replace CspDBResult
stuff with JDBC results.
Thanks in advance,
Phil
----- Original Message -----
From: Matthew Stevens <matthew.stevens@E...>
Sent: Wednesday, August 08, 2001 7:56 AM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has thedetails
on various tactics of migrating these type of utilities. Essentially, you
either need to convert these utilities to Models themselves or keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of custom helper method
as a replacement whicch uses JDBC results instead of CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100253094145066046167121181">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes. These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do the manipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion for these
utilities we have to do manually.
My question is Can we access the the models in the post migration
sameway or do we need requestContext?
We have lots of utility classes which are DataObject intensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected] -
RE: [iPlanet-JATO] TileView not being displayed
Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed]Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed] -
Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:
<!--getPage to getViewBean-->
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel\(]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\(\)\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\(\)\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:
<!--getPage to getViewBean-->
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel\(]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\(\)\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\(\)\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected] -
RE: [iPlanet-JATO] Re: Use Of models in utility classes
Hi all,
if you add the following to your spider2jato.xml
It will automatically map your CSpDataObject.executeImmediate to use
ExecuteImmediateUtil.executeImmediateSelect with the arguments mapped as
well.
Kostas
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpDataObject[.\s]*executeImmediate[\s]*\(([^,]*),([^)]*)\)]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpDataObject[.\s]*executeImmediate[\s]*\(([^,]*),([^)]*)\)]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[ExecuteImmediateUtil.executeImmediateSelect($1,$2,
getRequestContext())]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
-----Original Message-----
From: Matthew Stevens
Cc: vnamboori@y...
Sent: 11/29/01 11:23 AM
Subject: RE: [iPlanet-JATO] Re: Use Of models in utility classes
Namburi,
I have included an example in the file ExecuteImmediateUtil.java
The Yahoo Group will not handle the attached file we will put it in the
Files section shortly.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100253094145066046167121181">vnamboori@y...</a>]
Sent: Thursday, November 29, 2001 12:29 PM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes
Matt,
For CSpSelect.executeImmediate() I have an example of custom helpermethod as a replacement which uses JDBC results instead of
CSpDBResult.
Can you send me this example.
Thanks
Namburi
--- In iPlanet-JATO@y..., "Matthew Stevens" <matthew.stevens@E...>
wrote:
Namburi,
I will post a document to the group site this evening which has thedetails
on various tactics of migrating these type of utilities.Essentially, you
either need to convert these utilities to Models themselves or keepthe
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of custom helpermethod
as a replacement whicch uses JDBC results instead of CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes. These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do the
manipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion for these
utilities we have to do manually.
My question is Can we access the the models in the post migration
sameway or do we need requestContext?
We have lots of utility classes which are DataObject intensive.Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
[Non-text portions of this message have been removed]
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
[Non-text portions of this message have been removed]Hi all,
if you add the following to your spider2jato.xml
It will automatically map your CSpDataObject.executeImmediate to use
ExecuteImmediateUtil.executeImmediateSelect with the arguments mapped as
well.
Kostas
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpDataObject[.\s]*executeImmediate[\s]*\(([^,]*),([^)]*)\)]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpDataObject[.\s]*executeImmediate[\s]*\(([^,]*),([^)]*)\)]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[ExecuteImmediateUtil.executeImmediateSelect($1,$2,
getRequestContext())]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
-----Original Message-----
From: Matthew Stevens
Cc: vnamboori@y...
Sent: 11/29/01 11:23 AM
Subject: RE: [iPlanet-JATO] Re: Use Of models in utility classes
Namburi,
I have included an example in the file ExecuteImmediateUtil.java
The Yahoo Group will not handle the attached file we will put it in the
Files section shortly.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100253094145066046167121181">vnamboori@y...</a>]
Sent: Thursday, November 29, 2001 12:29 PM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes
Matt,
For CSpSelect.executeImmediate() I have an example of custom helpermethod as a replacement which uses JDBC results instead of
CSpDBResult.
Can you send me this example.
Thanks
Namburi
--- In iPlanet-JATO@y..., "Matthew Stevens" <matthew.stevens@E...>
wrote:
Namburi,
I will post a document to the group site this evening which has thedetails
on various tactics of migrating these type of utilities.Essentially, you
either need to convert these utilities to Models themselves or keepthe
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of custom helpermethod
as a replacement whicch uses JDBC results instead of CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes. These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do the
manipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion for these
utilities we have to do manually.
My question is Can we access the the models in the post migration
sameway or do we need requestContext?
We have lots of utility classes which are DataObject intensive.Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
[Non-text portions of this message have been removed]
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
[Non-text portions of this message have been removed] -
Re: [iPlanet-JATO] Sorting a resultset
Steve,
Todd will probably address this more, but to set the stage for the discussion,
I will chime in. As per your scenario "say a user wants to resort the results
by some other column" , I think there needs to be some clarification on the
life cycle of the model. You scenario implies that the user sees the data and
then submits a request to sort the data. This implies that the access to the
same data is spread across two HTTP requests.
Unless explicitly or implicitly stored in session, the Model is a per request
object. Therefore, under ordinary circumstances a new instance of Model is
constructed per request and populated as needed. This is done for scalability
reasons. Most applications would not scale properly if all model instances were
kept around in session per user. There is also the issue of data integrity, a
model stored in session may not reflect the current state of the RDBMS from
which the data was previously retrieved, perhaps minutes before. So, the
default action is to instantiate a new model and repopulate that model The
normal solution would be to apply the sort criteria to the data retrieval at
that point.
What I described above is the norm and the default.
If you have compelling reasons to prefer a single retrieval style, you have to
be prepared to store the Model data in session. There are several methods
within the ModelManager class which assist in this regard. You can see them
described in the java doc.
Also bear in mind that the SQLModelBase typically copies the data from the JDBC
result set into JATO specific local storage. This is done because the JDBC
result set is not as flexible as developer needs and requires the JDBC
connection to remain open while it is used.
I suspect that Todd will describe how you can manipulate the underlying JATO
specific local storage to change the order. I just wanted to make sure you
understood the life cycle issues involved and had justification for deviating
from the default.
Also, I'm still waiting for followup on the defaultCommandChild issue - we'd
like to fix it for JATO 1.2.1 if it is a problem and so far your case is the
only one we have heard of.
----- Original Message -----
From: stephen_winer
Sent: Wednesday, December 12, 2001 9:42 AM
Subject: [iPlanet-JATO] Sorting a resultset
If I want to sort a result set (Model) after the search has taken
place (say a user wants to resort the results by some other column),
can this be done without issuing another query? The reason I ask is
that the next() method in the ResultSetModelBase calls synchronizeRow
(), which resets the row, which sounds like a sort done outside of
the SQL would be reverted.
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
[Non-text portions of this message have been removed]The hidden field was present in the page, but it looked like this:
<input type="hidden" name="jato.defaultCommand" value=""../search"">
Seems like there is a small bug in the code generating this tag.
FYI - I am using JATO1.2
What file displays this text? Maybe I can go in and fix it and rejar
it.
Steve
--- Mike Frisino wrote:
Steve,
Can you check the HTML source that shows up in the browser? Do you see an entry that looks like this at the bottom of the form in
question?
>
<input type="hidden" name="jato.defaultCommand" value="/search">
To answer your question - it should work as you described. Some of the JatoSample make use of the defaultCommandChild. Can you try
running the sample BasicSample->Field Types and let us know what you
see.
>
Failing this you can send me your jsp file , maybe there is some subtle issue there. michael.frisino@s...
>
>
----- Original Message -----
From: stephen_winer
Sent: Friday, December 07, 2001 8:05 AM
Subject: [iPlanet-JATO] Using the defaultCommandChild in a form
I am trying to set the defaultCommandChild in my jato:form tag to be
the searcg button. The search button definition is:
<jato:button name="search"/>.
The form tag definition is:
<jato:form name="PendingIA" defaultCommandChild="/search">
Clicking on the search button works fine, but hitting return in one
of the textFields (which submits the form) passes a value of "" to
the createChild method in my viewBean, which throws an error. Why
does this not just work as normal and trigger the handleSearchRequest
() method?
Steve
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
>
>
>
[Non-text portions of this message have been removed] -
Re: [iPlanet-JATO] Re: Href click & tiled view display
Srinivas--
Remember, attachments don't come through on the forum. Please send them to
the jatoteam@e... alias.
Todd
----- Original Message -----
From: "Srinivas Chikkam" <srinivas.chikkam@w...>
Sent: Thursday, July 19, 2001 5:26 AM
Subject: [iPlanet-JATO] Re: Href click & tiled view display
Todd,
I'm calling resetTileIndex() in the begin display of the tiled views.
I'm attaching the code with this mail.
Outer tile: pgModelDistributionrMultiplePayeesTiledView
inner tile: pgModelDistributionrPayeeDetailsTiledView
Yes, Matt's mail helped me in resolving the first problem (submitting
the form on href click).
I have replaced the href from
<a
href="../Participant/pgModelDistribution?pgModelDistribution.linkNetDistribu
tion=&pageAttributes=">
$1,000 </a>
to
$1,000
and added a new javascript method as below:
function netDistFunc()
val = document.forms[0].elements["pageAttributes"].value;
_url =
"../Participant/pgModelDistribution?pgModelDistribution.linkNetDistribution=
&pageAttributes="+val;
>
document.forms[0].method = "post";
document.forms[0].action = _url;
document.forms[0].submit();
return false;
Now, I'm able to get the data entered by the user.
Thanks
Srinivas
Message: 2
Date: Wed, 18 Jul 2001 04:03:51 -0600
From: "Todd Fast" <toddwork@c...>
Subject: Re: Digest Number 157
Srinivas--
From where are you calling these methods, what event? Maybe you shouldsend
me the code for your nested tiled views--that's probably the easiest way
for
me to understand what's happening. Also, were any of Matt's
suppositions
correct?
Todd
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity towhich
it is addressed, and may contain information that is privileged,confidential or
exempt from disclosure under applicable law. If this is a forwardedmessage,
the content of this E-MAIL may not have been sent with the authority ofthe
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to thenamed
recipient, you are notified that any use, distribution, transmission,printing,
copying or dissemination of this information in any way or in any manneris
strictly prohibited. If you have received this communication in error,please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]
[email protected]Srinivas--
Remember, attachments don't come through on the forum. Please send them to
the jatoteam@e... alias.
Todd
----- Original Message -----
From: "Srinivas Chikkam" <srinivas.chikkam@w...>
Sent: Thursday, July 19, 2001 5:26 AM
Subject: [iPlanet-JATO] Re: Href click & tiled view display
Todd,
I'm calling resetTileIndex() in the begin display of the tiled views.
I'm attaching the code with this mail.
Outer tile: pgModelDistributionrMultiplePayeesTiledView
inner tile: pgModelDistributionrPayeeDetailsTiledView
Yes, Matt's mail helped me in resolving the first problem (submitting
the form on href click).
I have replaced the href from
<a
href="../Participant/pgModelDistribution?pgModelDistribution.linkNetDistribu
tion=&pageAttributes=">
$1,000 </a>
to
$1,000
and added a new javascript method as below:
function netDistFunc()
val = document.forms[0].elements["pageAttributes"].value;
_url =
"../Participant/pgModelDistribution?pgModelDistribution.linkNetDistribution=
&pageAttributes="+val;
>
document.forms[0].method = "post";
document.forms[0].action = _url;
document.forms[0].submit();
return false;
Now, I'm able to get the data entered by the user.
Thanks
Srinivas
Message: 2
Date: Wed, 18 Jul 2001 04:03:51 -0600
From: "Todd Fast" <toddwork@c...>
Subject: Re: Digest Number 157
Srinivas--
From where are you calling these methods, what event? Maybe you shouldsend
me the code for your nested tiled views--that's probably the easiest way
for
me to understand what's happening. Also, were any of Matt's
suppositions
correct?
Todd
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity towhich
it is addressed, and may contain information that is privileged,confidential or
exempt from disclosure under applicable law. If this is a forwardedmessage,
the content of this E-MAIL may not have been sent with the authority ofthe
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to thenamed
recipient, you are notified that any use, distribution, transmission,printing,
copying or dissemination of this information in any way or in any manneris
strictly prohibited. If you have received this communication in error,please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]
[email protected] -
RE: [iPlanet-JATO] Href click & tiled view display
Srinivas,
I hope that I am not oversimplifying your first question; repost if I do not
answer your question. Independent of JATO, HTML Form button sumbits will
include the scraping of data off the form input fields; the data will passed
as part of the body of the HTTP request. Therefore, you would expect to
receive all your inputs during the Button submit. In the case of a button,
a HTTP POST request is invoked. Href clicks, only submit the NVPs which are
encoded on the HREF URL. Therefore, it is impossible (under normal
circumstances) to retrieve the inputs from the FORM during the Href click.
In the case of a Href, a HTTP GET request is invoked. Some customers have
used a pattern in which Javascript is used to capture the Href onClick()
event to perform some runtime modifications to the HREF URL before the HTTP
GET request is submitted. I recommend to always have the LogProxy2 utility
running during development so that the HTTP requests and repsonses can be
debugged. If you setup the LogProxy2 (downloadable from this Group's Files
repository) then you would see the HTTP requests in the LogProxy2's console
window.
TiledView question: Remember, each TiledView requires a "primary
DatasetModel" which it uses for iteration of the tiles. It can be
confusing, but the API call of
<ContainerView>.getDefaultModel()
has no relation to the implementation class called DefaultModel. See the
Javadoc (excerp below)
/migtoolbox-1.1.1/doc/jato/api/com/iplanet/jato/view/ContainerView.html#getD
efaultModel()
"Returns this view's default model. The default model is typically used by
DisplayField children for default value storage (if they are not bound to
any other model). This method should always return a valid model instance.
Note that the default model need not be an actual instance of DefaultModel,
although this is usually the case."
Both of your TiledView's (inner and outer) are ContainerViews, each having
their own property for [get/set]DefaultModel(). Likewise, the ViewBean
parent of the outer TiledView is a ContainerView as well. With these facts
in mind, consider the behavior of the ModelManager. The ModelManager will
ensure that only once instance of specifically named model will be provided
during a request scope. Therefore, everytime that you make a call to
<ModelManager>.getModel(SomeModel.class)
no matter how many times you make this call during a request, the
ModelManager will ensure that you get the same object reference back.
Implicitly, you are asking for a Model with the exclusive name of
<ModelManager>.getDefaultModelInstanceName(SomeModel.class)
I believe that your problem is that you have the Primary Model of both the
inner and outer TiledView's set to the same instance of the DefaultModel
class. Therefore, the TiledViews are tripping over each other because they
are using the same Primary model. What I would do is change the constructor
of each TiledView to set an exclusive Primary model
// add to constructor of outer TileView
setPrimaryModel(getModelI(DefaultModel.class,"outer")
// add to constructor of inner TileView
setPrimaryModel(getModelI(DefaultModel.class,"inner")
remember to set the "size" of the Primary Model appropriately in the
beginDisplay() event of each TiledView before calling super.beginDisplay()
matt
-----Original Message-----
From: Srinivas Chikkam [mailto:<a href="/group/SunONE-JATO/post?protectID=061212020185082096169232190043244089032032196034013195172049230091142254099102">srinivas.chikkam@w...</a>]
Sent: Tuesday, July 17, 2001 7:36 AM
Subject: [iPlanet-JATO] Href click & tiled view display
Hi,
I'm facing the following two problems in JATO. Your help will be
appreciated.
1) Clicking a HREF.
I have a button and a href in a page. When I submit the page by
clicking the button, I'm able to
get all the user entered data (form elements) in handler method.
However, when I click
the href and I try to retrieve the data entered by the user in my
corresponding handler method, I'm
getting blank values.
How would I be able to get the user entered data upon clicking of a href
? I'm copying the sample
code for your reference.
// This returns me 5 values entered in the 5 tiles by the user.
public void handleBButtonRequest(RequestContext req)
throws ServletException, IOException
try
System.out.println("button clicked..");
pgSampleTiledView tiledView = getSampleTile();
System.out.println("\n\n\n\n@@@@@@@@@@@ No of tiles >>>
"+tiledView.getNumTiles());
int n = tiledView.getNumTiles();
for (int i=0; i<n; i++)
tiledView.setTileIndex(i);
System.out.println(i+".
"+tiledView.getTbValue().getValue().toString());
this.forwardTo(req);
catch (Exception ex)
ex.printStackTrace();
// This returns me 0 tiles and doesn't get into for loop
public void handleLinkModifyDistributionRequest(RequestContext req )
throws ServletException, IOException
try
System.out.println("href clicked..");
pgSampleTiledView tiledView = getSampleTile();
System.out.println("\n\n\n\n@@@@@@@@@@@ No of tiles >>>
"+tiledView.getNumTiles());
int n = tiledView.getNumTiles();
for (int i=0; i<n; i++)
tiledView.setTileIndex(i);
System.out.println(i+".
"+tiledView.getTbValue().getValue().toString());
this.forwardTo(req);
catch (Exception ex)
ex.printStackTrace();
2) Tiled view display
I have tiled view inside another tiled view. Based upon the data
retrieved from the database, lets say, the outer tile needs to be
displayed twice and the inner tile 3 times and 1 time.
For Ex: Lets say, the desired output from these tiled views is as
follows
STOCK INVESTMENT
stock name1
stock name2
stock name3
OTHER INVESTMENT
other investment1
The outer tiled view displays the investment type headings (STOCK
INVESTMENT or OTHER INVESTMENT) and inner tile
displays the actual stock names or the other investment names. Both
the tile views are bound to a default model. In the begin display
of these tiled view I'm setting the size of the model as
getPrimaryModel.setSize(requiredsize).
If i display 3 records in the inner tiled view in the first iteration
and i try to display 1 record in the second iteration, it displays 3
records
properly the first time but it doesn't display any records second
time. super.nextTile() returns false right away second time.
But If I try to display 1 record in the first iteration and 3 records in
the second iteration as below, it works fine.
STOCK INVESTMENT
stock name1
OTHER INVESTMENT
other investment1
other investment2
other investment3
Please let me know what could be the problem.
Thanks
~ Srinivas
The Information contained and transmitted by this E-MAIL is
proprietary to
Wipro Limited and is intended for use only by the individual or
entity to which
it is addressed, and may contain information that is privileged,
confidential or
exempt from disclosure under applicable law. If this is a
forwarded message,
the content of this E-MAIL may not have been sent with the
authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information
to the named
recipient, you are notified that any use, distribution,
transmission, printing,
copying or dissemination of this information in any way or in any
manner is
strictly prohibited. If you have received this communication in
error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]
[email protected]should read
// add to constructor of outer TileView
setPrimaryModel(getModel(DefaultModel.class,"outer");
// add to constructor of inner TileView
setPrimaryModel(getModel(DefaultModel.class,"inner");
matt
-----Original Message-----
From: Matthew Stevens [mailto:<a href="/group/SunONE-JATO/post?protectID=029166114165042198028082000056130080177026031196061123241150194211220076086020224">matthew.stevens@e...</a>]
Sent: Tuesday, July 17, 2001 9:25 AM
Subject: RE: [iPlanet-JATO] Href click & tiled view display
Srinivas,
I hope that I am not oversimplifying your first question; repost
if I do not
answer your question. Independent of JATO, HTML Form button sumbits will
include the scraping of data off the form input fields; the data
will passed
as part of the body of the HTTP request. Therefore, you would expect to
receive all your inputs during the Button submit. In the case of
a button,
a HTTP POST request is invoked. Href clicks, only submit the
NVPs which are
encoded on the HREF URL. Therefore, it is impossible (under normal
circumstances) to retrieve the inputs from the FORM during the Href click.
In the case of a Href, a HTTP GET request is invoked. Some customers have
used a pattern in which Javascript is used to capture the Href onClick()
event to perform some runtime modifications to the HREF URL
before the HTTP
GET request is submitted. I recommend to always have the
LogProxy2 utility
running during development so that the HTTP requests and repsonses can be
debugged. If you setup the LogProxy2 (downloadable from this
Group's Files
repository) then you would see the HTTP requests in the
LogProxy2's console
window.
TiledView question: Remember, each TiledView requires a "primary
DatasetModel" which it uses for iteration of the tiles. It can be
confusing, but the API call of
<ContainerView>.getDefaultModel()
has no relation to the implementation class called DefaultModel. See the
Javadoc (excerp below)
/migtoolbox-1.1.1/doc/jato/api/com/iplanet/jato/view/ContainerView
.html#getD
efaultModel()
"Returns this view's default model. The default model is typically used by
DisplayField children for default value storage (if they are not bound to
any other model). This method should always return a valid model instance.
Note that the default model need not be an actual instance of
DefaultModel,
although this is usually the case."
Both of your TiledView's (inner and outer) are ContainerViews, each having
their own property for [get/set]DefaultModel(). Likewise, the ViewBean
parent of the outer TiledView is a ContainerView as well. With
these facts
in mind, consider the behavior of the ModelManager. The ModelManager will
ensure that only once instance of specifically named model will
be provided
during a request scope. Therefore, everytime that you make a call to
<ModelManager>.getModel(SomeModel.class)
no matter how many times you make this call during a request, the
ModelManager will ensure that you get the same object reference back.
Implicitly, you are asking for a Model with the exclusive name of
<ModelManager>.getDefaultModelInstanceName(SomeModel.class)
I believe that your problem is that you have the Primary Model of both the
inner and outer TiledView's set to the same instance of the DefaultModel
class. Therefore, the TiledViews are tripping over each other
because they
are using the same Primary model. What I would do is change the
constructor
of each TiledView to set an exclusive Primary model
// add to constructor of outer TileView
setPrimaryModel(getModelI(DefaultModel.class,"outer")
// add to constructor of inner TileView
setPrimaryModel(getModelI(DefaultModel.class,"inner")
remember to set the "size" of the Primary Model appropriately in the
beginDisplay() event of each TiledView before calling super.beginDisplay()
matt
-----Original Message-----
From: Srinivas Chikkam [mailto:<a href="/group/SunONE-JATO/post?protectID=061212020185082096169232190043244089032032196034013195172049230091142254099102">srinivas.chikkam@w...</a>]
Sent: Tuesday, July 17, 2001 7:36 AM
Subject: [iPlanet-JATO] Href click & tiled view display
Hi,
I'm facing the following two problems in JATO. Your help will be
appreciated.
1) Clicking a HREF.
I have a button and a href in a page. When I submit the page by
clicking the button, I'm able to
get all the user entered data (form elements) in handler method.
However, when I click
the href and I try to retrieve the data entered by the user in my
corresponding handler method, I'm
getting blank values.
How would I be able to get the user entered data upon clicking of a href
? I'm copying the sample
code for your reference.
// This returns me 5 values entered in the 5 tiles by the user.
public void handleBButtonRequest(RequestContext req)
throws ServletException, IOException
try
System.out.println("button clicked..");
pgSampleTiledView tiledView = getSampleTile();
System.out.println("\n\n\n\n@@@@@@@@@@@ No of tiles >>>
"+tiledView.getNumTiles());
int n = tiledView.getNumTiles();
for (int i=0; i<n; i++)
tiledView.setTileIndex(i);
System.out.println(i+".
"+tiledView.getTbValue().getValue().toString());
this.forwardTo(req);
catch (Exception ex)
ex.printStackTrace();
// This returns me 0 tiles and doesn't get into for loop
public void handleLinkModifyDistributionRequest(RequestContext req )
throws ServletException, IOException
try
System.out.println("href clicked..");
pgSampleTiledView tiledView = getSampleTile();
System.out.println("\n\n\n\n@@@@@@@@@@@ No of tiles >>>
"+tiledView.getNumTiles());
int n = tiledView.getNumTiles();
for (int i=0; i<n; i++)
tiledView.setTileIndex(i);
System.out.println(i+".
"+tiledView.getTbValue().getValue().toString());
this.forwardTo(req);
catch (Exception ex)
ex.printStackTrace();
2) Tiled view display
I have tiled view inside another tiled view. Based upon the data
retrieved from the database, lets say, the outer tile needs to be
displayed twice and the inner tile 3 times and 1 time.
For Ex: Lets say, the desired output from these tiled views is as
follows
STOCK INVESTMENT
stock name1
stock name2
stock name3
OTHER INVESTMENT
other investment1
The outer tiled view displays the investment type headings (STOCK
INVESTMENT or OTHER INVESTMENT) and inner tile
displays the actual stock names or the other investment names. Both
the tile views are bound to a default model. In the begin display
of these tiled view I'm setting the size of the model as
getPrimaryModel.setSize(requiredsize).
If i display 3 records in the inner tiled view in the first iteration
and i try to display 1 record in the second iteration, it displays 3
records
properly the first time but it doesn't display any records second
time. super.nextTile() returns false right away second time.
But If I try to display 1 record in the first iteration and 3 records in
the second iteration as below, it works fine.
STOCK INVESTMENT
stock name1
OTHER INVESTMENT
other investment1
other investment2
other investment3
Please let me know what could be the problem.
Thanks
~ Srinivas
The Information contained and transmitted by this E-MAIL is
proprietary to
Wipro Limited and is intended for use only by the individual or
entity to which
it is addressed, and may contain information that is privileged,
confidential or
exempt from disclosure under applicable law. If this is a
forwarded message,
the content of this E-MAIL may not have been sent with the
authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information
to the named
recipient, you are notified that any use, distribution,
transmission, printing,
copying or dissemination of this information in any way or in any
manner is
strictly prohibited. If you have received this communication in
error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]
[email protected]
[email protected] -
Hi Shyam--
I'm not seeing this over here. So, we need to figure out why you're seeing
it--I need some more information.
First, what model are you using to back the tiled view? Second, can you
please forward the page and tiled view Java classes and JSPs to my work
address? At what point are you writing the getTileIndex() value out--during
display, business processing, what?
Also, try putting a stack trace in the nextTile() method of the tiled view
to see if its being incremented from somewhere you don't expect:
public boolean nextTile()
if (getTileIndex()==0)
new Exception().printStackTrace();
Todd
Todd Fast
Senior Engineer
Sun/Netscape Alliance
todd.fast@e...
----- Original Message -----
From: <shyam_gotur@p...>
Sent: Saturday, March 03, 2001 2:40 PM
Subject: [iPlanet-JATO] JATO 1.1 - First Tile is not displayed in TiledView.
Hi
We migrated our application from JATO 1.0 to JATO 1.1,
with 1.1 the nextTile() method is skipping the first tile in
tiledView.when printed the getTileIndex() to console , it is starting
with index 1 instead of 0.
Thanks
Shyam
[email protected]Hi Shyam--
I'm not seeing this over here. So, we need to figure out why you're seeing
it--I need some more information.
First, what model are you using to back the tiled view? Second, can you
please forward the page and tiled view Java classes and JSPs to my work
address? At what point are you writing the getTileIndex() value out--during
display, business processing, what?
Also, try putting a stack trace in the nextTile() method of the tiled view
to see if its being incremented from somewhere you don't expect:
public boolean nextTile()
if (getTileIndex()==0)
new Exception().printStackTrace();
Todd
Todd Fast
Senior Engineer
Sun/Netscape Alliance
todd.fast@e...
----- Original Message -----
From: <shyam_gotur@p...>
Sent: Saturday, March 03, 2001 2:40 PM
Subject: [iPlanet-JATO] JATO 1.1 - First Tile is not displayed in TiledView.
Hi
We migrated our application from JATO 1.0 to JATO 1.1,
with 1.1 the nextTile() method is skipping the first tile in
tiledView.when printed the getTileIndex() to console , it is starting
with index 1 instead of 0.
Thanks
Shyam
[email protected] -
hello,
how to refresh table display using slis and 'reuse_alv_grid_display method'.
when i'm refreshing table display it performs once again reuse_alv_grid_display.and when i back the previous value appear.how to solve it?
neonare you chaning any value in the gird if so use this..
Pass the user_command form name to the Import parameter
I_CALL_BACK_USERCOMMAND .
and have the Dynamic form implementation..
FORM user_command USING ucomm TYPE sy-ucomm
selfield TYPE slis_selfield.
"The below is important for Editable Grid.
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data .
ENDIF.
CASE ucomm.
WHEN 'REFRSH'.
ENDCASE.
selfield-refresh = 'X'.
ENDFORM. "user_command -
Re: [iPlanet-JATO] Re: Retrieving all Values from a Tiled View
Todd,
Let me try to explain you this time. I have a text field in a TiledViewBean.
When I display the page, the text field
html tag is created with the name="PageDetail.rDetail[0].tbFieldName" say
five times/rows with same name.
The html tags look like this.
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
When the form is submitted, I want to get the text field values using the
method getTbFieldName().getValues() which
returns an array object[]. This is in case where my TiledViewBean is not
bound and it is working fine.
Now in case when my TiledView is bound to a model, it creates the html tags
as follows.
<input type=text name="PageDetail.rDetail[0].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[1].tbFieldName" value=""
maxlength=9 size=13>
<input type=text name="PageDetail.rDetail[2].tbFieldName" value=""
maxlength=9 size=13>
Now when I say getTbFieldName().getValues() it returns only the first
element values in the object[] and the rest of the
values are null.
May be we need to create a utility method do get these values from
requestContext.
raju.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Saturday, July 07, 2001 3:52 AM
Subject: Re: [iPlanet-JATO] Re: Retrieving all Values from a Tiled View
Raju.--
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing likeI'm afraid I don't understand your point--can you please clarify? Do you
mean "value" instead of "name"?
What are you trying to do? What behavior are you expecting but notseeing?
>
Without further clarification, I can say that the setValues() methodsNEVER
populates data on multiple rows of a (dataset) model, nor does it affect
multiple fields on the same row. Perhaps what you are seeing is theeffect
of default values. Model that derive from DefaulModel have the ability to
carry forward the values set on the first row to other rows in lieu ofdata
in those other rows. This behavior is for pure convenience and can be
turned off, and it is turned off for the SQL-based models.
Todd
[email protected]Hi,
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing like
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[0].tbFieldValue
in which case, the getValues() method works fine.
But in case where the tiled view is bound to a model, it populates
with different field names such as,
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[1].tbFieldValue
in this case, the getValues() doesn't work. Any soultion to this?
We are using Moko 1.1.1.
thanks in advance,
raju.
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
Does anyone know of is there a single method to get all values of a
display
field in a tiled view without having to iterate through all the
values ie
resetTileIndex() / nextTile() approach.
ie Something that returns an Object[] or Vector just like ND returned a
CspVector. I tried using the getValues() methods but that allways returns
a
single element array containing the first element.
(I think now, that method is used for multi selecteable ListBoxes)Actually, no. We can add this in the next patch, but for now, I'd recommend
creating a simple utility method to do the iteration on an arbitrary model
and build the list for you.
Todd -
Re: [iPlanet-JATO] Retrieving all Values from a Tiled View
Does anyone know of is there a single method to get all values of adisplay
field in a tiled view without having to iterate through all the values ie
resetTileIndex() / nextTile() approach.
ie Something that returns an Object[] or Vector just like ND returned a
CspVector. I tried using the getValues() methods but that allways returnsa
single element array containing the first element.
(I think now, that method is used for multi selecteable ListBoxes)Actually, no. We can add this in the next patch, but for now, I'd recommend
creating a simple utility method to do the iteration on an arbitrary model
and build the list for you.
ToddHi,
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing like
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[0].tbFieldValue
in which case, the getValues() method works fine.
But in case where the tiled view is bound to a model, it populates
with different field names such as,
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[1].tbFieldValue
in this case, the getValues() doesn't work. Any soultion to this?
We are using Moko 1.1.1.
thanks in advance,
raju.
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
Does anyone know of is there a single method to get all values of a
display
field in a tiled view without having to iterate through all the
values ie
resetTileIndex() / nextTile() approach.
ie Something that returns an Object[] or Vector just like ND returned a
CspVector. I tried using the getValues() methods but that allways returns
a
single element array containing the first element.
(I think now, that method is used for multi selecteable ListBoxes)Actually, no. We can add this in the next patch, but for now, I'd recommend
creating a simple utility method to do the iteration on an arbitrary model
and build the list for you.
Todd -
Re: [iPlanet-JATO] TiledView - getting Values
Kostas--
This is because in TiledViewBase.mapRequestParameters(), calling
getChild(String name, int tile) before setting the values in the request,
will not set the location for the models other that the primary model-
effectively we are only setting one value (more that once if there aremany
values being submitted). So we get the value of the last value in thetiled
view. This is because getChild only changes the location on the primary
model. Which is why I the following code change worked.Ah, I admit I didn't connect the problem to this. Thanks ver much for
clarifying.
As you stated it might be better to add a place holder for all other
auxillary models and keep them in sync with the primary model.Agreed, this sounds like the correct approach. My unstated assumption was
that all location changes to the primary model would also occur on the
auxiliary models, so that would mean that the mapRequestParameters() method
would then work as intended.
How about making the primary model the controlling model. We would have to
"prime" the other models to ensure they all have the same number of rowsas
the highest model for the request. Otherwise we will the followingsituation
I detailed in the prevoius email:That works for me, but it will no doubt result in some strange behavior for
someone down the road. I'll see what's possible about syncing primary and
auxiliary models more explicitly, or at least checking for the situation
where the primary has more rows than the other models.
This way developers would not have to determine if a DisplayField is bound
to non primary model and do additional processing. I suppose it is aslight
design question as well. Enforcing a MVC approach is about going to the to
the Model to get you data. Onthe other hand NetDynamics just allowed youthe
get the value(s) of a field regardless of the Data Object it was or wasn't
bound to.Right, and I think it's important for JATO developers to preserve both techn
iques. The nice thing the technique of accessing the fields directly gives
you is the ability to obtain data in a non-model-specific way. This can be
just as valuable as providing model-only interactions.
Thanks for your feedback Todd. Let me know what you think.Same to you. I hope others on the list have similar suggestions that they
share with us. I think the above approach is sound and I'll be putting it in
for the next patch version, 1.1.2. If anyone has any final comments, please
let me know ASAP.
ToddHi,
I wanted to know how the getValues() method works the reason being,
when the tiled view is NOT bound to a model, it populates all the
fields with the same name as some thing like
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[0].tbFieldValue
in which case, the getValues() method works fine.
But in case where the tiled view is bound to a model, it populates
with different field names such as,
PageDetail.rDetail[0].tbFieldValue
PageDetail.rDetail[1].tbFieldValue
in this case, the getValues() doesn't work. Any soultion to this?
We are using Moko 1.1.1.
thanks in advance,
raju.
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
Does anyone know of is there a single method to get all values of a
display
field in a tiled view without having to iterate through all the
values ie
resetTileIndex() / nextTile() approach.
ie Something that returns an Object[] or Vector just like ND returned a
CspVector. I tried using the getValues() methods but that allways returns
a
single element array containing the first element.
(I think now, that method is used for multi selecteable ListBoxes)Actually, no. We can add this in the next patch, but for now, I'd recommend
creating a simple utility method to do the iteration on an arbitrary model
and build the list for you.
Todd -
Re: [iPlanet-JATO] .select()
Prashanth,
I assume you are trying to set the default values of the selectables.
Matt,
Actually, I believe this is a view type behavior because it is manipulating the
html properties upon preparing the object for display, however, currently it
appears there is no method for this. For now, you could get the raw html (in
the selectable fields end<fieldName>Display event) and manipulate the html
there. This is not the preferred way obviously, but after combing the API, I
don't see a direct way of doing this.
I'm sure Todd will chime eventually to clear it all up.
craig
----- Original Message -----
From: Matthew Stevens
Sent: Friday, January 12, 2001 11:32 AM
Subject: RE: [iPlanet-JATO] .select()
Prashanth,
I am new to the team here at sun, but I am experienced in ND. The ND spider
framework was not a model/view methodology. That is, the behavior normally
found in a model and view and controller are in the CSpSelectableGroup
object and its derived classes. I would suspect, although I learning the
iMT and JATO framework right now, that the equivalent behavior in JATO of
the
select()
method would be found in the MODEL; the VIEW would not have equivalent
behavior (e.g. jato.view.html.SelectableGroup
I don't know if that helps, but I am sure that the guys will respond.
matt
-----Original Message-----
From: Seetharam, Prashanth
[mailto:<a href="/group/SunONE-JATO/post?protectID=197212113112042031172057046036229239177230204009251079181045006199220253099030239126041013098158154163014176224">prashanth.seetharam@b...</a>]
Sent: Friday, January 12, 2001 2:14 PM
Subject: [iPlanet-JATO] .select()
In ND, we used to have the following functions for a CSpSelectableGroup
object like
public void select(int selectableIndex) throws
java.lang.IndexOutOfBoundsException
public boolean select(CSpValue value)
and different other versions of select.
How do we achieve the same in jato ..basically ..selecting an element in a
SelectableGroup object.
Thanks,
Prashanth Seetharam
[email protected]
eGroups Sponsor
[email protected]
[Non-text portions of this message have been removed]Craig,
I see your point. I would think that model holds the value and the view
displays it and may control the model too. I would think that the
setter/getter of what's selected is part of the model. I don't know and I
am sure that after I go to bed Todd will clear it up.
matt
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: Friday, January 12, 2001 3:03 PM
Subject: Re: [iPlanet-JATO] .select()
Prashanth,
I assume you are trying to set the default values of the selectables.
Matt,
Actually, I believe this is a view type behavior because it is
manipulating the html properties upon preparing the object for
display, however, currently it appears there is no method for
this. For now, you could get the raw html (in the selectable
fields end<fieldName>Display event) and manipulate the html
there. This is not the preferred way obviously, but after combing
the API, I don't see a direct way of doing this.
I'm sure Todd will chime eventually to clear it all up.
craig
----- Original Message -----
From: Matthew Stevens
Sent: Friday, January 12, 2001 11:32 AM
Subject: RE: [iPlanet-JATO] .select()
Prashanth,
I am new to the team here at sun, but I am experienced in ND.
The ND spider
framework was not a model/view methodology. That is, the
behavior normally
found in a model and view and controller are in the CSpSelectableGroup
object and its derived classes. I would suspect, although I
learning the
iMT and JATO framework right now, that the equivalent behavior
in JATO of
the
select()
method would be found in the MODEL; the VIEW would not have equivalent
behavior (e.g. jato.view.html.SelectableGroup
I don't know if that helps, but I am sure that the guys will respond.
matt
-----Original Message-----
From: Seetharam, Prashanth
[mailto:<a href="/group/SunONE-JATO/post?protectID=197212113112042031172057046036229239177230204009251079181045006199220253099030239126041013098158154163014176224">prashanth.seetharam@b...</a>]
Sent: Friday, January 12, 2001 2:14 PM
Subject: [iPlanet-JATO] .select()
In ND, we used to have the following functions for aCSpSelectableGroup
object like
public void select(int selectableIndex) throws
java.lang.IndexOutOfBoundsException
public boolean select(CSpValue value)
and different other versions of select.
How do we achieve the same in jato ..basically ..selecting anelement in a
SelectableGroup object.
Thanks,
Prashanth Seetharam
[email protected]
eGroups Sponsor
[email protected]
[Non-text portions of this message have been removed]
[email protected]
Maybe you are looking for
-
Mac OS X Server 10.4.10-11 client user problems
It appears that since updating to Mac OS X Server 10.4.10 (and now 10.4.11), running on an XServe G4 with 2GB of RAM, QuarkXPress Passport 6.5 (and also 6.52) crashes at the splash screen when newly created network users launch it on client computers
-
Good Afternoon Everyone, I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this per
-
Reg. Autoshapes from .rtf template not printing
Hi: I am using a RTF template to produce the XML output. When I upload it to Apps the autoshapes e.g Line, Box, ellipse etc.;don't show at the position that they were created on the template or they show only partially at another part of the document
-
Please send this bug to Apple Inc.
theres a bug on iphone IOS 7 go to google pictures search any picture you want and click to one of them. It will be open a black page. To fix this bug you can choose "open new tab page" and you see no black page. But we need a update for IOS 7
-
CS4 capture issue in Vista 64 bit
My captured files have poor video quality: when the video is playing in either the source window or the program monitor I can pause the video and the still image is crisp and very good resolutuion, when I start playing the video the image becomes sli