Re:Linking between the two components.

Hi Friends,
How to link a view in one component to the other component and the view in the second component should be read only..For example am having a submit button in first component when I click on the submit button the second component Approve button should receive this view which should be a read only file.

Hi,
     While you are navigating from one component to the other, you may use plugs and pass a parameter through the plug. Read the parameter in the other component and change the property of the UI elements to read-only.
Hope this helps you. Plz revert in case of some help.
Cheers!!!
Umang

Similar Messages

  • How link between the two tables

    Hi All
    In fact, I am new in Oracle and also, in this forum, and I hope that I find useful and benefited also reportedly.
    My oracle is Oracle Database 10g Express Edition.
    I have now two tables and one for staff and the second of the equipment used by staff.
    Well now how link between tables in the agenda third.
    Thanks

    You could read one of the many books on the subject, or you could just try something real simple like
    SQL> desc a
    Name                    Null?    Type
    USERNAME                NOT NULL VARCHAR2(30)
    PROFILE                 NOT NULL VARCHAR2(30)
    SQL> desc b
    Name                    Null?    Type
    USERNAME                         VARCHAR2(30)
    ROLENAME                NOT NULL VARCHAR2(30)
    SQL> select * from a natural join b;
    USERNAME         PROFILE      ROLENAME
    USER_ONE         DEFAULT      CRISYS_SYSADMIN
    USER_TWO         END_USER     USER_CONNECT
    USER_TWO         END_USER     CARS_APP_USER
    USER_THREE       BATCH_USER   BATCH_CONNECT
    USER_THREE       BATCH_USER   APPLICATION_OWNER
    etc.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Database link between the databases with the same name

    Hi,
    I need to establish a db link between two databases that are named the same way on two different servers.
    server 1 has a database dev1 and server2 has a database dev1. The tnsnames on server2:
    DEV1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server2)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DEV1)
    DEV1_server1 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = dev1)
    Can anyone let me know a way to create a database link between the two above?
    Thanks.

    Hi,
    Am not sure what problem you are facing in creating a db link
    create database link dev1_server1 connect to x identified by x using "dev1_server1"
    create database link dev1_server2 connect to x identified by x using "dev1_server2"where dev1_server1 and dev2_server2 are the tns entry in tnsnames.ora file of server2 and server1 respectively.
    Regards
    Anurag

  • How can I link data in two components in a BI Publisher report?

    Hi,
    If possible, I would like to make a BI Publisher (11g) report build as a pivot table next to an ordinary table, where data in each row in the two tables are linked to each other. E.g. if Customer A is shown in first row in the ordinary table, it should also be in the first row of the pivot table etc.
    Any filtering and sorting defined in the ordinary table to have effect in the pivot table.
    I would like to have a Top-10 filter on my data set, but that is not possible in a pivot table. That's why I somehow need to link the two components to each other.
    I have tried to do this by linking data sets in the Data Model, but that doesn't seem to work.
    Does anyone know if this is possible at all?
    Thanks,
    Henning

    Hi BIPuser,
    Thanks for a quick response.
    A useful link, but not really what I was looking for.
    I would like a pivot table to be related to whatever is shown in an ordinary data table. I have not been able to do that and maybe it isn't possible. In the link you sent me, you also see that any filtering made in the lower table doesn't affect the upper graphs (at the end of the video).
    Another way to solve my problem would be to replicate the filtering in the pivot table based on the filtering in the ordinary table. But for some reason Top/Bottom filtering is disabled in pivot tables. Do you is there is another way to use a top-10 filter in a pivot table?
    Thanks,
    Henning

  • Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two.

    Is it possible for the Adobe to put video instructions on these following things as my professor works on CS4 and I have CS6,it is really confusing for me to follow the disparitie between the two
    Modifying the header
    Changing page background color
    Changing sidebars in CSS
    Adding/changing a Spry link's background and hover colors in navbar
    Formatting headers in split view
    Deleting placeholder copy in the content container
    Inserting a video in a table
    Changing table background color
    Formatting text in the content container
    Format hyperlinks in CSS
    Insert page anchors and link to them with navbar hyperlinks
    Enter text in footer with a hyperlink
    Insert and format headers
      Use of a color picker (Color Cop)

    Use CS6 Help (F1).  Those are the most up to date articles for your product version.
    <Changing page background color>
    We've already told you how to do that with CSS code.
    <Deleting placeholder copy in the content container>
    Placeholders are deprecated.  Adobe removed them.
    <Inserting a video in a table>
    Insert > Media > HTML5 Video
    <Insert page anchors and link to them with navbar hyperlinks>
    Named anchors are deprecated in HTML.  Adobe removed them from DW.  Use Div IDs instead.
    Why are you taking a course that teaches outdated methods in CS4 which is no longer supported?
    Nancy O.

  • Nexus 6004 EIGRP Relationship between the two switches

    Hi All,
    I will try to explain this as best as I can. In our current TEST LAB we have a Pair of Cisco ASA5585x running in Active/Passive mode. We use a VRF transit to connect the 10 GB interface to a Pair of Cisco Nexus 6004 (L3) switches running vPC between them. Downstream we also have a pair of Cisco 9372 switches (L2) also running vPC between the two.
    As of right now we have EIGRP neighbor relationship formed between the two N6K's and the ASA.
    ASA
    ciscoasa# sh eigrp neighbors
    EIGRP-IPv4 neighbors for process 100
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    1 172.16.230.9 Te0/8.451 12 01:30:25 1 200 0 52
    0 172.16.230.10 Te0/8.451 12 01:30:25 1 200 0 48
    The ASA formed relationship with both N6K's
    SWITCH1
    Nexus6-1# sh ip eigrp neighbors vrf inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    0 172.16.8.3 Vlan680 11 01:28:28 1 50 0 45
    1 172.16.230.10 Vlan451 13 01:28:28 1 50 0 46
    2 172.16.230.11 Vlan451 10 01:28:00 4 50 0 13
    Nexus6-1#
    SWITCH2
    Nexus6-2# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    2 172.16.8.2 Vlan680 14 01:30:11 23 138 0 48
    0 172.16.230.9 Vlan451 13 01:30:11 480 2880 0 50
    1 172.16.230.11 Vlan451 13 01:29:48 1598 5000 0 13
    Nexus6-2#
    Both Nexus Switches formed EIGRP neighbors using the vPC Peer-Link. There is enough documentation out there that strongly suggest not to use vPC Peer-Links for EIGRP anything.
    We do have additional interfaces available on the 6K's that we can use as a cross connect for EIGRP. What we are having trouble understanding how we can force EIGRP traffic over those ports?
    Here is a complete Switch config:
    Switch1
    Nexus6-1# sh run
    feature telnet
    cfs eth distribute
    feature eigrp
    feature interface-vlan
    feature lacp
    feature vpc
    feature lldp
    vlan 1
    vlan 451
    name P2P_VRF_SVI
    vlan 652
    name Management
    vlan 680
    name Inside
    vrf context Inside
    vrf context management
    ip route 0.0.0.0/0 172.16.52.1
    vrf context peer-keepalive
    vpc domain 99
    role priority 1
    peer-keepalive destination 10.200.50.2 source 10.200.50.1 vrf peer-keepalive
    delay restore 120
    interface Vlan1
    interface Vlan451
    description Inside p2p to ASA
    no shutdown
    vrf member Inside
    ip address 172.16.230.9/29
    ip router eigrp 100
    no ip passive-interface eigrp 100
    interface Vlan651
    interface Vlan680
    description Inside Network
    no shutdown
    vrf member Inside
    ip address 172.16.8.2/22
    ip router eigrp 100
    interface port-channel99
    switchport mode trunk
    spanning-tree port type network
    vpc peer-link
    interface port-channel102
    switchport mode trunk
    vpc 102
    interface Ethernet1/1
    description vPC Peer Link 1.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet1/6
    interface Ethernet1/7
    description vPC Peer Link 1.7 to Nexus 9372 PRI
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet1/8
    interface Ethernet1/9
    interface Ethernet2/1
    description vPC Peer Link 2.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet2/2
    interface Ethernet2/7
    description vPC Peer Link 2.1 to Nexus SEC
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet2/8
    interface Ethernet8/1
    description keep-alive peer-link to ALNSWI02
    no switchport
    vrf member peer-keepalive
    ip address 10.200.50.1/30
    interface Ethernet8/2
    description Uplink to ASA
    switchport mode trunk
    interface Ethernet8/3
    interface mgmt0
    vrf member management
    ip address 172.16.52.3/23
    line console
    line vty
    boot kickstart bootflash:/n6000-uk9-kickstart.7.0.1.N1.1.bin
    boot system bootflash:/n6000-uk9.7.0.1.N1.1.bin
    router eigrp 100
    passive-interface default
    default-information originate
    vrf Inside
    autonomous-system 100
    default-information originate
    poap transit
    Nexus6-1#
    Nexus6-1# sh ip eigrp neighbors vrf inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    0 172.16.8.3 Vlan680 11 01:28:28 1 50 0 45
    1 172.16.230.10 Vlan451 13 01:28:28 1 50 0 46
    2 172.16.230.11 Vlan451 10 01:28:00 4 50 0 13
    Nexus6-1#
    Nexus6-1# sh ip eigrp topology vrf Inside
    IP-EIGRP Topology Table for AS(100)/ID(172.16.8.2) VRF Inside
    Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
    r - reply Status, s - sia Status
    P 172.16.8.0/22, 1 successors, FD is 2816
    via Connected, Vlan680
    P 172.16.230.8/29, 1 successors, FD is 2816
    via Connected, Vlan451
    Nexus6-1# sh vpc
    Legend:
    (*) - local vPC is down, forwarding via vPC peer-link
    vPC domain id : 99
    Peer status : peer adjacency formed ok
    vPC keep-alive status : peer is alive
    Configuration consistency status : success
    Per-vlan consistency status : success
    Type-2 consistency status : success
    vPC role : primary
    Number of vPCs configured : 1
    Peer Gateway : Disabled
    Dual-active excluded VLANs : -
    Graceful Consistency Check : Enabled
    Auto-recovery status : Disabled
    vPC Peer-link status
    id Port Status Active vlans
    1 Po99 up 1,451,652,680
    vPC status
    id Port Status Consistency Reason Active vlans
    102 Po102 up success success 1,451,652,6
    80
    Nexus6-1# sh spanning-tree
    VLAN0001
    Spanning tree enabled protocol rstp
    Root ID Priority 32769
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Eth8/3 Desg FWD 2 128.1027 P2p
    VLAN0451
    Spanning tree enabled protocol rstp
    Root ID Priority 33219
    Address 8c60.4f2d.2ffc
    This bridge is the root
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33219 (priority 32768 sys-id-ext 451)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Desg FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    VLAN0652
    Spanning tree enabled protocol rstp
    Root ID Priority 33420
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33420 (priority 32768 sys-id-ext 652)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    VLAN0680
    Spanning tree enabled protocol rstp
    Root ID Priority 33448
    Address 1005.caf5.88ff
    Cost 2
    Port 4197 (port-channel102)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 33448 (priority 32768 sys-id-ext 680)
    Address 8c60.4f2d.2ffc
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Desg FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Nexus6-1#
    Switch2
    Nexus6-2# sh run
    !Command: show running-config
    !Time: Sat Feb 12 19:02:44 2011
    version 7.0(1)N1(1)
    hostname Nexus6-2
    feature telnet
    cfs eth distribute
    feature eigrp
    feature interface-vlan
    feature lacp
    feature vpc
    feature lldp
    vlan 1
    vlan 451
    name P2P_VRF_SVI
    vlan 652
    name Management
    vlan 680
    name Inside
    vrf context Inside
    vrf context P2P_Inside_VRF
    vrf context management
    ip route 0.0.0.0/0 172.16.52.1
    vrf context peer-keepalive
    vpc domain 99
    role priority 2
    peer-keepalive destination 10.200.50.1 source 10.200.50.2 vrf peer-keepalive
    delay restore 120
    interface Vlan1
    interface Vlan451
    description Inside p2p to ASA
    no shutdown
    vrf member Inside
    ip address 172.16.230.10/29
    ip router eigrp 100
    no ip passive-interface eigrp 100
    interface Vlan680
    description Inside Network
    no shutdown
    vrf member Inside
    ip address 172.16.8.3/22
    ip router eigrp 100
    interface port-channel99
    switchport mode trunk
    spanning-tree port type network
    vpc peer-link
    interface port-channel102
    switchport mode trunk
    vpc 102
    interface Ethernet1/1
    description vPC Peer Link 1.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet1/2
    interface Ethernet1/6
    interface Ethernet1/7
    description vPC Link 1.7 to Nexus 9372 SEC
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet1/8
    interface Ethernet1/12
    interface Ethernet2/1
    description vPC Peer Link 2.1
    switchport mode trunk
    speed auto
    channel-group 99
    interface Ethernet2/2
    interface Ethernet2/6
    interface Ethernet2/7
    description vPC Link 2.1 to Nexus PRI
    switchport mode trunk
    speed auto
    channel-group 102 mode active
    interface Ethernet2/8
    interface Ethernet2/12
    interface Ethernet8/1
    description keep-alive peer-link to ALNSWI01
    no switchport
    vrf member peer-keepalive
    ip address 10.200.50.2/30
    interface Ethernet8/2
    description Uplink to ASA
    switchport mode trunk
    switchport trunk allowed vlan 1,451,652,680
    interface Ethernet8/3
    interface Ethernet8/20
    interface mgmt0
    vrf member management
    ip address 172.16.52.4/23
    line console
    line vty
    boot kickstart bootflash:/n6000-uk9-kickstart.7.0.1.N1.1.bin
    boot system bootflash:/n6000-uk9.7.0.1.N1.1.bin
    router eigrp 100
    vrf Inside
    autonomous-system 100
    default-information originate
    poap transit
    logging logfile messages 6
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H Address Interface Hold Uptime SRTT RTO Q Seq
    (sec) (ms) Cnt Num
    2 172.16.8.2 Vlan680 14 01:30:11 23 138 0 48
    0 172.16.230.9 Vlan451 13 01:30:11 480 2880 0 50
    1 172.16.230.11 Vlan451 13 01:29:48 1598 5000 0 13
    Nexus6-2#
    Nexus6-2# sh ip eigrp topology vrf Inside
    IP-EIGRP Topology Table for AS(100)/ID(172.16.8.3) VRF Inside
    Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
    r - reply Status, s - sia Status
    P 172.16.8.0/22, 1 successors, FD is 2816
    via Connected, Vlan680
    P 172.16.230.8/29, 1 successors, FD is 2816
    via Connected, Vlan451
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh vpc
    Legend:
    (*) - local vPC is down, forwarding via vPC peer-link
    vPC domain id : 99
    Peer status : peer adjacency formed ok
    vPC keep-alive status : peer is alive
    Configuration consistency status : success
    Per-vlan consistency status : success
    Type-2 consistency status : success
    vPC role : secondary
    Number of vPCs configured : 1
    Peer Gateway : Disabled
    Dual-active excluded VLANs : -
    Graceful Consistency Check : Enabled
    Auto-recovery status : Disabled
    vPC Peer-link status
    id Port Status Active vlans
    1 Po99 up 1,451,652,680
    vPC status
    id Port Status Consistency Reason Active vlans
    102 Po102 up success success 1,451,652,6
    80
    Nexus6-2#
    Nexus6-2#
    Nexus6-2# sh spanning-tree
    VLAN0001
    Spanning tree enabled protocol rstp
    Root ID Priority 32769
    Address 1005.caf5.88ff
    Cost 3
    Port 4194 (port-channel99)
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)
    Address 8c60.4f2d.777c
    Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
    Interface Role Sts Cost Prio.Nbr Type
    Po99 Root FWD 1 128.4194 (vPC peer-link) Network P2p
    Po102 Root FWD 1 128.4197 (vPC) P2p
    Eth8/2 Desg FWD 2 128.1026 P2p
    Eth8/3 Desg FWD 2 128.1027 P2p
    VLAN0451
    Spanning tree enabled protocol rstp
    Root ID Priority 33219
    Address 8c

    Jon,
    Are you ready for the mass confusion?
    when Looking at the ASA EIGRP neighbors output here is what I see.
    ASA# sh eigrp neighbors
    EIGRP-IPv4 neighbors for process 100
    H   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq
                                                (sec)         (ms)       Cnt Num
    3   172.16.230.1            Te0/8.450        13  16:45:14 1    200   0   64
    2   172.16.230.2            Te0/8.450        11  16:45:14 1    200   0   84
    1   172.16.230.10           Te0/8.451        11  16:45:20 1    200   0   178
    0   172.16.230.9            Te0/8.451        13  16:45:20 1    200   0   148
    For simplicity sake lets just concetrate on Interface TenGigabit0/8.451 which is the SVI on the Nexus switch that is VLAN451
    From the Nexus Switch 6004 that is directly connected to the ASA here is what I see
    SWI01# sh ip eigrp neighbors vrf Inside
    IP-EIGRP neighbors for process 100 VRF Inside
    H   Address                 Interface       Hold  Uptime  SRTT   RTO  Q  Seq
                                                (sec)         (ms)       Cnt Num
    0   172.16.8.3              Vlan680         10   17:04:30  54   324   0   177
    1   172.16.230.10           Vlan451         11   16:59:10  819  4914  0   178
    2   172.16.230.11           Vlan451         14   16:53:48  24   144   0   20
    The Inside VRF that is tied to both SVI's on the Switch vlans 451 and 680 is in EIGRP 100 on the switch
    SWI01# sh run int vlan 451
    interface Vlan451
      description Inside p2p to ASA
      no shutdown
      vrf member Inside
      ip address 172.16.230.9/29
      ip router eigrp 100
      no ip passive-interface eigrp 100
    SWI01# sh run int vlan 680
    interface Vlan680
      description Inside Network
      no shutdown
      vrf member Inside
      ip address 172.16.8.2/22
      ip router eigrp 100
      hsrp 1
        authentication text test
        preempt
        priority 250
        ip 172.16.8.1
    so you with me so far?
    If you are you have noticed that on the ASA neighbors the ASA sees 172.16.230.11 as a neighbor which is the Secondary Nexus SW. That is becauise they all share the same subnet.
    172.16.230.8/29
    Brakedown:
    PRI Nexus 6004 - 172.16.230.9
    SEC NEXUS 6004 - 172.16.230.10
    PRI ASA 5585x  - 172.16.230.11
    SEC ASA 5585x  - 172.16.230.12
    Because the ASA EIGRP network is a /29 it learns the Secondary Nexus via the Primary Nexus.
    I am not sure that the link we created between the two Nexus Switches is doing anything but consuming ports right now.
    SWI01# sh run int ethernet 8/9
    interface Ethernet8/9
      description EIGRP PORT to Secondary Nexus
      switchport mode trunk
      switchport trunk allowed vlan 450-451
    SWI02# sh run int ethernet 8/9
    interface Ethernet8/9
      description EIGRP PORT to Primary Nexus
      switchport mode trunk
      switchport trunk allowed vlan 450-451
    So the SVI's that go up to the ASA for inspection are 450 and 451. The network SVI's are 600 and 680 all of them live on the switch, and 680, and 600 are extended over the peer links down to the 9372's.
    I think that we are breaking the golden rule of vPC BUT.. I am not 100% sure. Some of the documents read that we should not be allowing network vlans over peer links, but then how do you extend the vlans down to the leaf switch?
    This is giving me nightmares at the moment…
    does this make sense? 

  • How to find link between the field (kzbew) mvt.ind. and the (ebeln) ?

    Hi all,
    while finding the link between the kzbew and the ebeln the only table i found is MSEG.
    But i want to populate the data in this table only?
    So please give me the solution how i can fetch the movement indicator for a particular purchase order?
    As i am using the idoc segment MBGMCR02((for creating goods receipt)...i have to pass the movt. indicator with the movement type also.......?

    the field - description in MSEG says:
    Movement Indicator
    Specifies the type of document (such as purchase order or delivery note)  that constitutes the basis for the Movement.
    Use
    This indicator is necessary, for example, to enable a distinction to be made between a goods receipt for a purchase order and a goods receipt for a production order. These two goods movements result in different data
    and account updates in the system.
    Dependencies
    The movement indicator is derived from the transaction code.
    what transaction do you want to use for your idoc?

  • The diff between the two 8 core 3Ghz mac pros?

    I am in the market for a mac pro. I will spend the money for an 8 core 3ghz cpu. I am a “do it your self” kind of guy. I am not afraid to do some installations myself (drives, Ram, GFX card, optic drive,)
    I mainly use CS3, cinema 3D and FCP, On XP, Nuke and Studio Max. Dual displays, One 24” LCD and One CRT.
    I have a few basic questions that maybe someone can point me to a link or better explain.
    What is the diff between the two mac pros listed below. All I can come up with is the graphics cards and the ram? Is this right?
    My plan is to upgrade the ram with the newer 800MHz DDR-2 ram, and graphics card. The stock 7300GT can get me by for now, than something else when the time is right (8800GT, I have not done my homework here, not a priority yet). I do zero gaming and don’t even care to spend money to play games. My priority is not in gaming and I feel a majority of folks are spending the money on the card to play games, so I am trying to find the pros for upgrading in my situation. Better open gl capturing, better graphics acceleration in CS3 better for 3d apps, most likely, but I can survive with the 7300GT for now right? I am fine with that now, but an upgrade in a year or so in the graphics card department is the plan. My priority for the money is order: ram, cpu, drives, Gfx card.
    So, recap, what disadvantage would I put myself in for going with the 1st model of mac pro listed below or spend the extra 600 for the second model of macpro? Again, ram will 100% for sure be upgraded as will the hard drives.
    Advice please.
    Here is a link to the two units I am looking at. It is a 600$ difference.
    http://www.macmall.com/macmall/families/new_promo~dp~7445233~family~macpro~promo ~23.asp
    http://www.macmall.com/macmall/families/new_promo~dp~7371992~family~macpro~promo ~10.asp

    Thanks Twist,
    That is very useful info off the top of your head there. I will hopefully find the time this weekend to read through all the info and translate everything suggested from the other reply @ macworld.
    If anyone else has any useful info that is clear like twist please give me your suggestions, for now I will read a bit more as suggested.
    Thank you.

  • How to have smooth fade effect between the two images via XML

    I have my xml gallery working fine, all i need is to have a smooth fade effect between the two images, right now they are changing with a jerk. Can somebody help me getting this effect with my code. Any help is much appreciated.
    function loadXML(loaded) {
        if (loaded) {
            xmlNode = this.firstChild;
            image = [];
            link = [];
            thumbnails = [];
            thumbnailsOn = [];
            total = xmlNode.childNodes.length;
            for (i=0; i<total; i++) {
                image[i] = xmlNode.childNodes[i].childNodes[0].firstChild.nodeValue;
                link[i] = xmlNode.childNodes[i].childNodes[1].firstChild.nodeValue;
                thumbnails[i] = xmlNode.childNodes[i].childNodes[2].firstChild.nodeValue;
                thumbnailsOn[i] = xmlNode.childNodes[i].childNodes[3].firstChild.nodeValue;
                thumbnails_fn(i);
            firstImage();
            loopPlay();
    xmlData = new XML();
    xmlData.ignoreWhite = true;
    xmlData.onLoad = loadXML;
    xmlData.load("data.xml");
    thumbnail_mc.attachMovie("prev", "prev_new", 1);
        thumbnail_mc.prev_new._x= -20;
        thumbnail_mc.prev_new._y= -1;
    thumbnail_mc.attachMovie("next", "next_new", 4);
    thumbnail_mc.next_new._y= -1;
        //thumbnail_mc.next_new._x= -30;
    thumbnail_mc.prev_new.onRelease = function() {
        prevImage();
    thumbnail_mc.next_new.onRelease = function() {
        nextImage();
    p = 0;
    this.onEnterFrame = function() {
        filesize = holder.getBytesTotal();
        loaded = holder.getBytesLoaded();
        //preloader._visible = true;
        if (loaded != filesize) {
            preloader.preload_bar._xscale = 100*loaded/filesize;
        } else {
            preloader._visible = false;
            if (holder._alpha<100) {
                holder._alpha += 10;
    function nextImage() {
        if (p<(total-1)) {
            p++;
            if (loaded == filesize) {
                holder._alpha = 0;
                holder.loadMovie(image[p], 1000);
                //desc_txt.text = description[p];
                picture_num();
    click._alpha=0;
    click.onRelease = function() {
        getURL(link[p], "_blank");
        loopStop();
    function HoldImage() {
        nextImage();
        clearInterval(myTimer2);
        loopPlay();
    function checkImageState() {
        if (p==total-1) {
            p = -1;
        if (loaded==filesize) {
            clearInterval(myTimer1);
            myTimer2 = setInterval(HoldImage,3000);
    function loopPlay() {
        myTimer1 = setInterval(checkImageState, 3000);
    function loopStop() {
        clearInterval(myTimer1);
        clearInterval(myTimer2);
    function prevImage() {
        if (p>0) {
            p--;
            holder._alpha = 0;
            holder.loadMovie(image[p], 1000);
            target_mc._alpha = 40;
            picture_num();
    function firstImage() {
        if (loaded == filesize) {
            holder._alpha = 0;
            holder.loadMovie(image[0], 1000);
            picture_num();
    function picture_num() {
        current_pos = p+1;
    function thumbnails_fn(k) {
        thumbnail_mc.createEmptyMovieClip("t"+k, thumbnail_mc.getNextHighestDepth());
        tlistener = new Object();
        tlistener.onLoadInit = function(target_mc) {
            target_mc._x = (target_mc._width+10)*k;
            target_mc.pictureValue = k;
            target_mc.onRelease = function() {
                p = this.pictureValue-1;
                nextImage();
            target_mc.onRollOver = function() {
                this._alpha = 40;
            target_mc.onRollOut = function() {
                this._alpha = 100;
        image_mcl = new MovieClipLoader();
        image_mcl.addListener(tlistener);
        image_mcl.loadClip(thumbnails[k], "thumbnail_mc.t"+k);       

    I have a center of energy program similar to the one used by IMAQ. I have attached an example using your data. I first found the center of the entire image. Then I split the array in two and found the centers of each half. That gives you the position of the two spots. This program won't work if the spots are too close to each other or are separeted in the other axis.
    Attachments:
    distance between two spots one direction.vi ‏1096 KB
    Center of energy calc.vi ‏40 KB

  • What's the difference between the two IE11 installers listed below?

    Hello,
    What is the difference between these two IE-11 downloads (image below)? One is 28MB and one is 54MB. I am having a lot of post-installation issues with the 54MB installer (i.e. opens blank pages, can't access a simple page like google, Windows search stops
    indexing). When I install the 28MB download, (so far) I don't have any issues. Since the 28MB installation works, it sounds like my desision is easy but I would still like to know the difference between the two. BTW, the quick install is only 2MB, so I know
    I don't have the quick install. 
    Any help would be appriciated, thank you in advance.
    Sorry, for the spacing on the links below. This system won't let me add 'real' links until my account is varified.
    28MB Installer Link
     microsoft . com / en-us / download / details.aspx?id=40902
    54MB Installer Link
     windows . microsoft . com / en-us / internet-explorer / ie-11-worldwide-languages

    Hi,
    In my environment, they are the same size:
    Alex Zhao
    TechNet Community Support

  • Difference between the two CME 10.0 file sets (files are listed as v1 and v2)?

    Does anyone know what the difference is between the two CME 10.0 rar files listed here:
    http://software.cisco.com/download/release.html?mdfid=277641082&softwareid=282786567&release=10.0&relind=AVAILABLE&rellifecycle=&reltype=latest
    They're both the same size, and yet one set is tagged as v1 and the other as v2?    Which one contains the most current GUI files for CME 10.0 running on IOS 15.4.2?

    Hi,
    As per the following link
    http://www.cisco.com/c/en/us/td/docs/ios/15_3m_and_t/release/notes/15_3m_and_t/153-3MNEWF.html#pgfId-135097
    New Hardware Features Supported in Cisco IOS Release 15.3(3)M2
    There are no new hardware features in Cisco IOS Release 15.3(3)M2.
    New Software Features Supported in Cisco IOS Release 15.3(3)M2
    Lead Free 800
    For detailed information about this feature, see the following document:
    http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/hardware/installation/guide/1Overview880-860.html
    HTH
    Manish

  • Link between the Schedule Lines and the GR document

    Hi
    I would like to find the link between the Schedule Lines (of Scheduling Agreement) and the GR document. i.e. which GR has been made against which Schedule Line. I have checked the tables EKET, EKBE, MSEG but there is no link with the Schedule Line, I found the link only with the item number there.
    Thanks
    Prashanth

    Hi
    At the time of posting the GR for a SA you will be not posting this with reference to the Schedule line of the SA item. So system will always update the GR document against the SA item and update qty on the schedule line.
    May be this is the reason we donot have any direct relation ship to material document and Scheclue line
    Thanks & Regards
    Kishore

  • I have purchased a new iPad and given my old one to my husband.  How do I change the Apple ID over to him.  We are having continuous confusion between the two iPads

    I have purchased a new iPad and given my old one to my husband.  How do I change the Apple ID over to him.  We are having continuous confusion between the two iPads

    Hi Marg42,
    Thanks for visiting Apple Support Communities.
    First, your husband can create his own Apple ID via the web, computer, or iPad, if he hasn't already:
    My Apple ID
    https://appleid.apple.com
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/ht2731
    Next, he can sign out of the Apple services that are currently using your Apple ID on your old iPad, and sign in with his own.
    This article has instructions for doing so for specific Apple services:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Alternately, he can erase the device and set it up as new using the steps in this article:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/ht4137
    Best Regards,
    Jeremy

  • HT202213 Two Itunes libraries on one computer.  Any way to share content between the two libraries?

    We have 2 ITunes libraries on one computer.  Is there a way to share movies, music, etc. between the two libraries?

    To your second question, probably the easiest way is to set up another user account on your machine. Then when that user opens iTunes, it will be a new library (empty) that they can put anything they want into, and not corrupt your library.
    With another user account, they can also customize their own desktop photo, desktop icons, etc. so lots of benefits doing it that way. Works out great for me and my 13 year old daughter so I don't have to see the latest Emo band hearthrob's face on my desktop.
    Patrick

  • Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

    Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

    Look into using Apple Configurator.  It's the easiest way to "reimage" and Manage iPads that I know of right now. 
    http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
    Also, look into using the Educational Volume Purchase Program, if you have not already done so. 
    http://www.apple.com/education/volume-purchase-program/

Maybe you are looking for

  • Export quality (THE most popular newbie issue in this forum?)

    Here it is (again) 1.) I'm starting with the "DV NTSC 48kHz" Sequence Preset 2.) Importing a clip: DV/DVCPRO - NTSC 720x480 3.) Exporting: Quick Time Movie, Self-Contained, Current Settings. 4.) Resulting QT movie looks softer than original footage -

  • Environment selection problem at web control panel start

    Hi everybody. We are facing some problems after BPC web control panel logon. It appears a popup window asking for an environment selection. After that, the browser is refreshed and the popup appears again. This is the popup. Can someone help us? Than

  • Decode with multiple column sub query

    Dear's What is the wrong with the query select * from common_master where (company_code,lpad(rtrim(ltrim(bu_code)),12,' ')) IN decode ('ADMIN','ADMIN',(select company_code ,lpad(rtrim(ltrim(bu_code)),12,' ') from common_master ) ,(select company_code

  • Set default frame size to "large" instead of "tiny"

    Hello, The title says it all, really. As I do more scripting than animation, I'd like to have large frames by default. This setting is not even saved with the file. Is there any way ? Thanks. PJ

  • Weblogic 12c on windows 2003(32bit)

    Hi guys, I installed weblogic 12c on windows 2003(32bit)(oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32.exe); I created schedule job (startup weblogic console on server startup); The  weblogic instance run java applications; Every second