RE: Need Information related to Integrated Planning and I views

Hi All,
Goodday,
We are using the Integrated Planning extensively in the Project and also FOx too.
We have came across the requiremnet like we need to add the functions whcih we are creatiung now in to the Portal???
Can Any body advice on this how to do it????
What I know as per my understanding is
Te portal is made up of RÔLES (first level menu tab). Each role can itself be made up of a WORKSET (second level menu tab) and each workset is made up of an IVIEW (link to access the input/calculation screens or analysis statuses).
ROLE
Workset1 workset2
Iview1
Iview2
Ivie3
Can any body could help me ont his what wa sthe Procedure I need to follow???
Regards
RAM

Alright Ram,
The process is first you create a ROLE, then a WORKSET, then a PAGE and within the PAGE you have IVIEWS.
Personally I dont bother with worksets and just create ROLES, PAGES and iVIEWS.
It depends on your requirements.
Cheers,
Nick.

Similar Messages

Relation between Integrated Planning and BPS

Dear all,
I am just considering about using the BI Integrated Planning. I have a few question about the relation between BW-BPS and BI Integrated Plannning.Can anybody tell me about the near future about these both two? Is the BI Integrated Planning going to replace the BW-BPS or are they going to co-exist instead? Do we have to use them both? Although I'm not used to the new features of BI Integrated Planning, I just quite don't get what is the advantage of using them besides ensuring the future development.
Best regards,
Takashi

Hi Matsumoto,
I have recently implemented both BW-BPS and IP on 2004S.
I have always started with trying to implement IP instead of BW-BPS because, as we all agree, it is the future. Another reason was personal: I wanted to learn IP.
Sometimes I however had to switch to BW-BPS because of following reasons:
- the front-ends are more advanced if the users have a SAPGUI installed. The Excel front-end of IP is more advanced compared to the Excel GUI version of BW-BPS. IP is based on workbooks (the same as BW workbooks). Workbooks have more flexibility than BW-BPS Excel GUI version. The problem is that you need the 2004S gui to use IP via workbooks. Installations of the 2004S gui is rather complex and is almost impossible to install remotely because there are so many components involved.
- the front-ends on the web do not require a SAPGUI and are more advanced in BW-BPS. In BW-BPS, you can use the office web components (Excel on the web) where you can copy past, etc. The IP web version is HTML based and does not yet support the office web component. You can use it for data entry of a limited number of data but is hard to use for large volumes.
- BW-BPS for now supports more hierarchy features than IP. Displaying hierarchies can be done on IP. If you want to do bottom-up or top-down planning, it is adviseable to develop on BW-BPS; Again, these features will in the future be supported by IP but are not yet.
- performance: saving is quite slow in IP compared to BW-BPS.
- timing: if you want to move fast, go for BW-BPS. There is a lot more documentation on forums, you will have a lot less problems etc.
By the way, Sean is 100% correct about the instability of IP. We had to implement a number of notes and had SAP to create new notes for problems we had.
Please assign points if this solved your problem.
Best Regards,
Filip

*** Question How to load a file into BI-Integrated Planning and use WAD 7.0

Hi, I created an manual DTP upload to my planning infocube and it works fine. The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics. So all of my Time Characteristics are fine, both Calendar and Fiscal.
However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal. The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.
How can I get the upload to populate my Fiscal Period Characteristics?
Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
Thanks!

My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
I added the following code if anyone is interested.
*{ INSERT BWDK902323 1
THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
<0FISCVARNT> = 'NK'.
CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
EXPORTING
IV_CALMONTH = <0CALMONTH>
IV_PERIV = <0FISCVARNT>
IMPORTING
EV_FISCPER3 = <0FISCPER3>
EV_FISCPER = <0FISCPER>
EV_FISCYEAR = <0FISCYEAR>.
*} INSERT

HT201318 I need to cancel my storage plan and I don't have physical phone or anything associated with the phone anymore to get serial # from, so how do I contact apple?

I need to cancel my storage plan and I don't have the physical phone or anything associated with the phone anymore to get serial # from, so how do I contact apple?

Contact the Apple online store at the number shown at the bottom of this page (1-800-MY-APPLE in the U.S. and Canada.)
If you ever synced your phone with iTunes, you can find your serial number by doing the following:
Launch iTunes on your computer.
Hold down your Control key, then on the menu bar in iTunes click iTunes>About iTunes (Mac) or Help>About iTunes (PC).
Any previously synced devices will scroll in a pop-up window; press the space bar to stop scrolling so you can write down the serial number.

Need Information about CTI Integration

Hi,
I am new to CTI. I am doing a feasibility study to integrate our Contact Centers with our existing Peoplesoft CRM product so that Agents can take calls through Peoplesoft. I believe that we need a CTI middleware, CTI Server and a Adapter/Connector to integrate the Telephony/PBX with Peoplesoft CRM.
Does Cisco provide any CTI middleware/CTI Server product to achieve my goal. Can someone also provide me an approximate cost for the same. I am planning to start integrating a small Call center of 30 agents with Peoplesoft CRM. Based on the Implementation feedback I can think about integrating other Call centers.
I would be grateful if someone can provide me with the necessary information
Thanks
Kannan

http://developer.cisco.com/documents/146485/146641/UCCX%20CTI%20Protocol%20Guide%20701.pdf
Thanks,
Anand

Questions about Integrated Planning and BPS

Hi all,
I'm testing the functions of BW7.0. And at the point of comparing the new BI Integrated Planning from the BPS, I'm stuck with 3 problems. Can anybody give me some solution?
i. When using the input-ready layout of the BW-BPS 3.5, I was able to create a new record and load it up to the cube. Is it possible to make the same operation like this using the BI Integrated Planning of BW7.0?
ii. When using the BW-BPS 3.5, showing the character hierarchy on the Manual planning layout can be chosen. And I'd like to show the BPS Characteristic Hierarchies in BI Integrated Planning of BW7.0 like it is in the BW-BPS 3.5. Is it possible to show the hierarchy in similar type somehow? If not,can't I show the sum of it anyhow? And if possible,can you also show the sum of the each hierarchy and change the data?
iii. When showing the Characteristic combination data, can you choose how to show them from the transaction data or from all the combination like it was possible in the BW-BPS 3.5?
Kind regards,
Hiroshi Iwanaga

Dear Beat,
Thanks for your help.
The information you gave me made a lot of help.
Can I ask you more about the first question?
About getting new lines in the table web item,as you have told me, I have set the parameter NEW_LINES_COUNT as 20 in the table web item. But when I execute it,no lines shows up. Is this a program error or am I setting the parameter in a wrong place?
And this getting new lines feature, is it also possible when using a workbook?
Thanks in advance,
Hiroshi Iwanaga

Integrated Planning and Non-cumulative key figure

Hi
I´m creating an Integrated Planning application and a problem has occurred. The users want to plan on inflow and outflow and at the same time have a row with the total sum in the same layout (they are planning on 0CALMONTH and 0ORGUNIT) This can e.g. be solved through use Web Application Designer with one planning query and one traditional query.
Any way. I have created a non-cumulative key figure with an inflow- and an outflow key figure. The problem is that the non-cumulative key figure starts working first when I change the planning mode from plan status to load status. I could use function modules, to change the status, behind the save button but there are several users who are planning at the same cube at the same time and I don´t want to lock the others from planning.
How to solve this?
- Is it possible to restrict the switching, from plan to load, by setting some kind of filter at the users org.unit? (0ORGUNIT is an authorization object)
- Is it possible to create a process chain and then load the data to another cube for reporting at just this key figure? And also here have a filter at the org.unit
I will gladly get all kind of idea and input to solve this problem. Maybe there is some other way to go than using non-cumulative key figureu2026

Thanks for your answers
I have tried different scenarios and I will use a u201Dsave-buttonu201D. In the save-button I use the commands SAVE_DATA and EXECUTE_PROCESS_CHAIN. The command u201CEXECUTE_PROCESS_CHAIN starts a process chain that switches from plan mode to load mode and then back to plan mode again.
One new problem has arisen. The non-cumulative key figure is updating if an existing value (inflow- or outflow) is changed. But if an input is made to an empty cell, without value, nothing happen when I press on the start-button. BUT if I refresh the browser the non-cumulative value is updated!!!
Is there any command in WAD that refresh the whole page? If so I can include it in my start-button.
If not, any sugestion on how to solve the problem?
Best regards
Mikael

Need information about SAP EM Configuration and Implementation

Hi,
I am new to SAP EM.I need to do Configuration for EM and Procurement visibility process.
Please provide some information on configuration of EM with examples.
Thanks,
Prasuna.

Hi
There is wealth of information available on the [Service Marketplace |https://websmp107.sap-ag.de/scm]on the standard visibility scenarios which will probably get you started. Procurement visibility scenario is one of the them and have documentations.
There are couple of points which are worth knowing that SAP Event Management
- requires configuration in both application system (ECC) and SAP EM system (SCM)
- good understanding of the function module (extractors) for sending and posting events
- well thought supply chain events (design) business would like to monitor and manage
- reactions to both expected and unexpected events (follow-up activities)
The other resource available are [SAP PRESS technical book |http://www.sap-press.com/products/Implementing-and-Configuring-SAP-Event-Management.html] and [published case studies |http://www.scmexpertonline.com/article.cfm?session=&id=4804] on the SAP EM Procurement visibility scenario.
Cheers
Sandeep Pradhan

Need a solution for integration BPM and UCM 11.1.1.4?

Hi all,
Currently, I am using BPM & SOA 11.1.1.4.
Could somebody advise me a solution for integration BPM and UCM ?
I heard somebody said that need to wait to BPM 11G patch set 5 (11.1.1.6) version, which have basic BPM and UCM integration and haven't to using external API like RIDC or CIS.
Thanks & Regards.
Ming Nguyen.

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

NEED Information on BPS( Business Planning & SImulation )

Hi All,
I am new to BPS . please give me some Information for the following.
1. What is the use of BPS with BW.
2. Any good Document available on the net for the beginner like me.( If any Document is there plz give me the link )
3. What is the need of using BPS.
I have seen the document which is there in help.sap but that has not given me clear idea.
So please help me regarding the above.
please help me....
Thanks,
Kiran Manyam.

Hai its business planning simulation tcode BPS0 similar to administartion work bench we have planning area ,planning level and planning functions we can use only when the cube is planning enabled.check the help.sap website and sdn threads will serve your requirements.
Goodluck.

I need information on how to install and execute the export/import utility

Hi there,
I am migrating an application from Weblogic 10 to Weblogic 10.3. I need to import a desktop from a .portal file in Weblogic 10.3. I know how to do the process of installing and executing this tool in WebLogic 10, but I don't know how to do it on the 10.3 version, because it's different and I haven't found any information about this process on the internet.
Could you please tell me what do I have to do? or give me a document that can I follow the steps from?
Thanks & Regards
Franco Utreras.

Hi Franco,
If you will post your Query in http://forums.oracle.com/forums/forum.jspa?forumID=573 (WebLogic Portal Specific Forum)...then you may get more Accurate, Quick and Experties Answers.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Need information reguarding the HS-1200 and Vi

I need some help on installing the HS-200 onto my Vista computer. I don't know a whole lot about computers, but I don't wanna
keep wasting my time with a headset if it isn't going to work. I don't know what details are needed for someone to assist me on this
matter or if this is even the right place to post, but seeing as the only thing it could be is a Vista problem, this seems the most likely spot for me to find some answers. Well, what happened is this. I recieved the HS-200 headset by mail a couple days ago, and
when inserting the installation CD, and completing it in its entirety, I restarted my computer to only find 2 things on my computer,
both being registrations for the product and nothing else. My guess is that the reason for this is the installation CD is for XP and not
compatible for Vista. So, if it's at all possible for someone to give me the information needed to properly install my HS-200 Headset
it would be MOST appreciated (surely this headset wouldn't be all that problem for someone who more computer expertise than
myself to work properly).
I don't know what information would be needed, but this may help(if more information is needed, please tell me here, I will check quite often on this matter as I'd like to start using my headset ASAP)
Windows Vista Home Premium (32-bit Operating System)
AMD Athlon 64 X2 Duel Core Processor 5200+ 2.60GHz
Realtek High Definition Audio
Please, any help in this matter is GREATLY appreciated.
Message Edited by Superfail on 08-29-2008 04:39 PM

still requesting help in this matter.

Need information related to ETL_PROC_WID Column

Hi
I am New to DAC As well as OBIA i need to know about the ETL_PROC_WID Column and it's imporatance in DAC
thank's in Advance ...

Hi,
For populating ETL_PROC_WID we have a mapplet by name MPLT_GET_ETL_PROC_WID. You need to use this mapplet and pass Integration_id as the input for this mapplet and it will generate ETL_PROC_WID.
W_PARAM_G is pupulated from the file (file_dual), which is available in srcFiles folder in informatica. The mapping used for populating W_PARAM_G is SIL_Parameters_Update.
Thanks,
Navin Kumar Bolla

Need BAPIs to read Marketting plan and its Campaigns under it as childs

Hi All,
As we aware of under Marketing plan there are multiple campaigns,
so I need to read those hierarchy using any BAPI or class,
Please let me know.
Thnaking you.
Regards,
VjmHud

Hi Shaik Shavali,
     is it possible to get all levels of items i.e. from parent to all childrens vice verse,
     i.e from Marketting plan to all lower level campagins....
    how we can do this?
Thanking you.

Need to automize : application integrating siebel and peoplesoft data bases

Hi All,
I really need help of you guys.
The scene is, I need to automise soemthing like my exisiting appliation runs on AquaLogicDSP which interacts with Siebel and PeopleSoft DB.
I need to automize one thing say,
1. To send mail through AquaLogic [Preferrably using BEA Messaging API] else Java API.
2. Getting connected to DB, fire some queries and again send out a mail.
3. I need this everything to be done in existing aqualogicc code.
Can you please lemme know how to proceed with this.
I will be highly thankful to you.
Many thanks,
Naveen Dutt.

Hi All,
I really need help of you guys.
The scene is, I need to automise soemthing like my exisiting appliation runs on AquaLogicDSP which interacts with Siebel and PeopleSoft DB.
I need to automize one thing say,
1. To send mail through AquaLogic [Preferrably using BEA Messaging API] else Java API.
2. Getting connected to DB, fire some queries and again send out a mail.
3. I need this everything to be done in existing aqualogicc code.
Can you please lemme know how to proceed with this.
I will be highly thankful to you.
Many thanks,
Naveen Dutt.

RE: Need Information related to Integrated Planning and I views

Similar Messages

Maybe you are looking for