Re: Portege Z830-11J - Is is able to upgrade the Rapid start technology

Hi,
i purchased my ultrabook, a Z830-11J very cheap, about 550 ...
now i know why, it doesnt have rapid start technology.
Intel claims that is a part of every ultrabook, but not of the Z830-11J.
So, is there anything i can do, to convert it in any way (add hardware componenten, or software) to a TRUE Ultrabook?
Jrgen

Hi
The Intel Rapid Start Technology requires a select Intel CPU, Intel software and BIOS update and a Intel SSD drive.
Check this:
+Does the Portg Z830 and Satellite Z830 Ultrabook support Intel Rapid Start Technology?+
http://aps2.toshiba-tro.de/kb0/FAQ23039T0000R02.htm
The Portg Z830 equipped with AMT (short model PA PT225E) does not support Intel Rapid Start Technology

Similar Messages

  • Re: Portege Z830-11j - Sim card not detected

    Portege Z830-11j I have this laptop... it is great,
    However the right side drawer supposed to a SIM card is not detectable when it installed.
    Is there some lack of software, or other setup required.
    Can anyone help?
    +Message was translated+

    Do you use this notebook with Toshiba preinstalled and preconfigured Win 7 system?
    Did you change something in the system configuration?
    Is 3G module recognized in the device manager?
    Please check this because due to missing and not installed 3G Ericsson driver, the sim module would not be recognized by system and the inserted sim card could not be handled.

  • Am I able to upgrade the operating software on my 2009 Macbook Pro to work with Mavericks?

    I have a 2009 Macbook Pro with 4 GB of Ram. Am I able to upgrade the software enough to support Mavericks and other software?

    Yes, but you have a couple major caveats:
    Rosetta is gone:
    http://discussions.apple.com/docs/DOC-6271
    Many drivers may not work.
    And you have to buy 10.6 first, then upgrade to 10.6.8, to get the free 10.9 update, then the 10.9.2 update to avoid the security leaks of the first two versions of 10.9.

  • Hi there.......I have a Mini...1.33GHz Power PC G4..memory=512MB and OS=10.4.11. I'm wondering whether I would be able to upgrade the OS to 10.5? Thanks for your help.

    Hi there.......I have a Mini...1.33GHz Power PC G4..memory=512MB and OS=10.4.11. I'm wondering whether I would be able to upgrade the OS to 10.5? Thanks for your help.

    Yes, you can. You may want to install more RAM first.
    (62045)

  • I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
    (116937)

  • I have a first gen iPad am I able to upgrade the iOS?

    I have a first gen iPad am I able to upgrade the iOS?

    You might, though, be able to keep using many of your apps in an older version that is compatible with ios 5.1.1.
    You might be able to use some older versions af apps. These links have information that can help you.
    http://9to5mac.com/2013/09/17/ios-app-store-now-allows-legecy-app-downloads-to-s upport-older-hardware-and-software/
    http://www.engadget.com/2013/09/17/apple-ios-last-compatible-version-app-iphone- ipod-ipad/
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
    Hope his helps.
    Please note on the third link apps does not have a space (a pps) but after it's sent, it sometimes shows shows a space.

  • I ordered the MBP Retina, will I be able to upgrade the 8GB memory  ?

    Hi, I ordered the MBP Retina and was wondering if I will be able to upgrade the 8GB memory to 16GB at a later dte?
    Doug

    check this out
    http://www.ifixit.com/Teardown/MacBook-Pro-with-Retina-Display-Teardown/9462/1#. T-DW56B6XnY the memory can (it ain't a party) be taken out but, the plug in configuration is a doozy. If you look and compare it to others on the street.
    Good luck

  • Portege Z830-11j PT225E - How to delete an unknown BIOS password

    Hello everyone .
    I have big problem with my netbook
    Few days ago i was little drunk and i made a password
    When its booting up the netbook but now i forgot that password .
    I just wish someone will help me how to delete password.
    Please.

    Bad luck dude unknown BIOS password can be removed only by authorized persons (Toshiba service engineer).
    Such password is an kind of anti-theft protection and anti-theft system and cannot be removed by any person.
    So get in touch with service partner in your country to get it removed.

  • All that I have read indicates I should be able to upgrade the IOS  of a Iphone 3gs from ver 4.2.1 to 4.3 or 5.0 at the least. Most apps have been upgraded to 4.3 minimum. All unavailable to me using ver 4.2.1. How can I upgrade to 4.3  or are there probs

    Why cannot the Iphone 3gs be upgraded from ios 4.2.1 to 4.3 or 5.0

    Perhaps yours is an iPhone 3G and not a 3Gs...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Are you able to upgrade the mSata drive on Model Number: A1502 13 in. Macbook Pro with Retina Display?

    Have been trying to find info on upgrading the mSata drive on my Mac but some people say it is possible as others say its not. Wondering if anyone else can provide their own input. I am looking at the Samsung 840evo 500 GB mSata drive and want to know if its compatible.
    Thank you

    Its possible to replace it yes.   Its not easy, as you have to dissasemble the MacBook to get to it.
    The drive you want is not compatible.  The drive in current 2014 MacBoock Pro´s is not even a Sata type drive.  Its a PCie Blade type drive.
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Mid+2014+SSD+Rep lacement/27849

  • Am I able to upgrade the powersupply and GPU on a Pavilion 500-424

    I have a Pavilion 500-424 and I would like to upgrade my GPU. This pc only has a 65 watt power supply and I am wondering if this and the GPU are upgradeable.

    Here is what the motherboard looks like:
    It is much like a laptop. There are no expansion slots to add a video card of any kind. And the 65w power supply is external so that cannot be upgraded either. Sorry. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • 7941G Phone Screen Blank. Not able to Upgrade the Firmware

    Hi All
    I have Phone Cisco 7941G, iam try to upgrade i mess with that phone i believe, now screen is blank
    I have followed the below steps :
    1: Disconnect the computer from your Network and Connected to Different Switch, where Phone and PC Only connected to that  network
    2: Phone and PC connected to Switch
    3: Configure a static IP on the computer and disable any firewall.
    3a: Use an IP of 10.10.10.1
    3b: Use a Mask of 255.255.255.0
    3c: Gateway and DNS can be left blank
    4: Install and open TFTPd32 software
    5: Click settings and modify the following:
    5a: In the GLOBAL tab, uncheck everything except TFTP Server and DHCP Server
    5b: In the TFTP tab, set a Base Directory to somewhere convenient ( where my files are located).
    5c: In the TFTP tab, set TFTP Security to None
    5d: in the DHCP tab uncheck all DHCP Options
    6: Restart TFTPd32
    7: Click on the settings tab and modify the following:
    7a: In the DHCP tab, set IP pool starting address to 10.10.10.3, size of pool 2, mask 255.255.255.0, additional option 66 and 10.10.10.1 then click OK
    8. Click on the Log viewer tab
    9: Plug in the power of the phone and watch the logs.
    I see below logs keep poping same logs.
    Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:28:26.724]
    Previously allocated address 10.10.10.3 acked [23/12 13:28:26.724]
    6512 Request 2 not processed [23/12 13:28:26.734]
    Connection received from 10.10.10.3 on port 49152 [23/12 13:28:26.794]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:28:26.795]
    Using local port 53590 [23/12 13:28:26.795]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:26.801]
    Connection received from 10.10.10.3 on port 49153 [23/12 13:28:28.044]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:28:28.046]
    Using local port 53591 [23/12 13:28:28.046]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:28.051]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:52.950]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:55.950]
    Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:31:21.618]
    Previously allocated address 10.10.10.3 acked [23/12 13:31:21.618]
    6512 Request 2 not processed [23/12 13:31:21.618]
    Connection received from 10.10.10.3 on port 49152 [23/12 13:31:21.671]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:31:21.671]
    Using local port 64619 [23/12 13:31:21.671]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:21.682]
    Connection received from 10.10.10.3 on port 49153 [23/12 13:31:22.909]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:31:22.919]
    Using local port 64623 [23/12 13:31:22.919]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:22.919]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:21.322]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:24.330]
    Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:34:15.567]
    Previously allocated address 10.10.10.3 acked [23/12 13:34:15.567]
    6512 Request 2 not processed [23/12 13:34:15.567]
    Connection received from 10.10.10.3 on port 49152 [23/12 13:34:15.617]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:34:15.617]
    Using local port 56662 [23/12 13:34:15.617]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:15.627]
    Connection received from 10.10.10.3 on port 49153 [23/12 13:34:16.861]
    Read request for file <term41.default.loads>. Mode octet [23/12 13:34:16.861]
    Using local port 56663 [23/12 13:34:16.861]
    <term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:16.871]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:46.280]
    Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:49.283]
    Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 38:AA:3C:51:02:85 [23/12 13:36:11.185]
    Client requested address 0.0.0.98 [23/12 13:36:11.185]
    DHCP: proposed address 10.10.10.4 [23/12 13:36:11.205]
    My TFTP Folded have below files shown in the Image.
    How can i make it work  from non-working phone to working phone..
    any suggestions most welcome, tried last 2days but no results, googled many pages and read related article does not help me.

    Hi
    I do not know the old version of Cisco 7941G
    I got one for testing myself for my LAB, Want to reset the Password, but I did Factory reset by keying 124567890*#
    iam trying to Load 9.2X tried both SCCP and SIP, both iam getting the same error.
    At the moment iam not going to use for any CME or CUCM, iam want to use for my SIP provider and my SIP Server.
    Bandi

  • HT4623 HI, i am using I POD 3rd generatin with OS 3.1.3.  I am not able to update the new IOS and i could not found the update button in my POD.  Pleaese help me how do that.  regards

    Dear Friends,
    I am using IPOD touch 3rd generation with OS 3.1.3 (7E18) (Model MA623LL), i am not able to upgrade the IOS.  My IPOD does not have the software update button.
    Please help me how to upgrade the IOS for this version i could not able to download the games and new features.
    Please guide me.
    regards
    Nagaraju T
    [email protected]

    You iPod, model MA623LL , is a 1G iPod and those can only go to iOS 3.1.3
    Identifying iPod models

  • Portege Z830 - cannot boot from DVD

    I have a Portege Z830-11F. I upgraded my machine to Windows 8 and but i didnt like it. So i decided to make a clean setup of Windows 7.
    I downloaded the .iso file from internet and burned it to a DVD.
    I plugged in my external DVD player, restarted, entered BIOS and changed the boot order and restarted again.
    All went well and i was able to install Windows 7.
    But i didn't had the drivers, (thought the OS would recognize the LAN driver at least, i was mistaken)
    So i upgraded to Windows 8 again (without restarting) just to download the drivers for Windows 7.
    I did so, but now i cannot boot from the DVD.
    When i enter the boot order section, sometimes the DVD is listed, sometimes not.
    In both cases the machine boots to Windows 8 straightly, does not allow me to boot from the DVD.
    The strange thing is i was able to boot from the same DVD in the first place.
    What can i do to boot from the DVD?

    At first I must say that I dont understand why you didnt create recovery media before you have changed anything. Using preinstalled Toshiba recovery media creator you could create recovery USB and the whole situation would be not so complicated. This recovery image is activated but now if you install own OS version you will not be able to use product key that you got with your notebook.
    Anyway, now perform complete Win8 shutdown and after doing this start notebook and use F12 to enter boot menu. Of course your external DVD must be connected before you start your notebook. it can be that external drive will be listed on USB boot option like on my U940.

  • Portege Z830 - screen has been broken and I need to replace it

    Hi
    I have Toshiba Portege z830. My screen has been broken and I need to replace it.
    Is it possible to install some IPS screen instead of original LTN133AT25-601? Which IPS screen is compatible with LTN133AT25-601?

    Hi
    The original LCD which was used in Z830 was an 13.3"(HD) 1366 x 768 TFT Color LCD.
    So if you want to use other display, then you should pay attention to the screen size and the connectors.
    I think these are most important key elements.

Maybe you are looking for