Re: Report painter - Creation of Profit center report (New GL enabled)

Hello all,
I am trying to create profit center report using report painter. I am trying to create formula variable to show the cumulative values for the elements assigned to the profit center. 
I want to get values for cumulative period ie for eg if i give 12 as period on selection screen i want to get the cumulative value for per 1 + per 2 + per 3+ per 4 + ......... + per12.
I did the following for getting the cumulative values for period.
1. created Formula variable ZPER01 with formula '#S006'
2. created formula variable ZPER02 with formula IF 'ZPER01' > 1 THEN 'ZPER01' + 1 else 17.
3. IF 'ZPER02' > 1 THEN 'ZPER01' + 'ZPER02' + 1  ELSE 17
3. continued the creation until ZPER16 with formula IF 'ZPER05' > 1 THEN 'ZPER01' + 'ZPER02' +
'ZPER03' + 'ZPER04' + 'ZPER05' + 'ZPER06' + 'ZPER07' + 'ZPER08' + 'ZPER09'+ 'ZPER09' + 'ZPER10' + 'ZPER11' + 'ZPER12' + 'ZPER13' + 'ZPER14' + 'ZPER15'+ 1 ELSE 17
Could you pls help me with your inputs.
Many thanks.
Regards,
Pabbi.

Hi,
You can copy your Report Writer or Report Painter reports from Profit Center Accounting to new General Ledger Accounting. This is possible for standard reports as well as your own reports. A corresponding tool supports you in this.
Prerequisites
In classic Profit Center Accounting, you have standard reports or your own reports that you want to copy.
To be able to use the Report Writer reports or the Report Painter reports in new General Ledger Accounting, you need to have assigned the scenario Profit Center Update to at least one ledger in Customizing for Financial Accounting (New).
http://help.sap.com/erp2005_ehp_03/helpdata/EN/47/1360faad483127e10000000a1553f7/frameset.htm

Similar Messages

  • Report Painter coding gor Profit center Accounting(GLPct)

    Hi all,
    I am working on report painter.
    can anyone help me how to look after the code.
    I need to do changes in the existing Report Painter.
    I want to know the variables.Formulas.
    I want to know from where we can find that,we are using formulas etc etxc
    Please ,if anyone can help me,it would be greatful.
    Thanks
    Aravinda
    Edited by: Aravinda Enakula on Mar 3, 2008 4:33 PM

    [url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
    this may be helpful
    regards.
    santhosh reddy

  • NEW GL and PROFIT CENTER REPORT

    Hi,
    In New GL ( ECC6) the profit center is also available in GL itself. Under this situatrion Profit center data is flowing to Controlling.
    Previousl we take Profit center report from 8 series Library and use it for report painter.
    Now what is the library to be used for report painter for generating Profit center reports with drill down functionality like Cost center report from COntolling module.
    Is it necessary that we have configure in CO module lo to get the Profit center so that we can generate the Profit center report more user friendly reports.
    What is the route to be followed to enable the users to check ther B/S on Profit center.
    Appreciate your early response please
    Regards,
    Chitra
    Rajesh J Salecha  
    Posts: 80
    Registered: 4/17/07
    Forum Points: 44 
    Solved problem (10)
    Very helpful answer (6)
    Helpful answer (2)
       Re: NEW GL Report  
    Posted: Sep 8, 2009 11:57 AM    in response to: Chitras           Reply 
    Hi,
    I think this thread is more relevant for ERP-financials....
    Please visit below link for the resolution for your query.
    SAP ERP Financials
    Regards
    Raj
    Chitras  
    Posts: 162
    Registered: 5/10/07
    Forum Points: 64 
       Re: NEW GL Report  
    Posted: Sep 12, 2009 8:26 PM    in response to: Rajesh J Salecha     Edit          Reply 
    Hi Rajesh,
    As the message has gone to BI Forum I am copying the whole message for yr response please.
    I was away for few days and Ihave seen yr response. .
    Whne I click the link it does not take me to the right place but it goes to the Forum header page only -- not ot th specific answer/thread.
    Appreciate if you could send me the right thread to learn from it.
    Thanks, Chitra

    Sorry I was away.
    I am in ECC 6 and the New GL report gives Profi center report . But I ca get the comfort like 8A ledger with drill down.
    My doubt is will the new GL report takes care of all CO related transactions w/o GL?
    Thanks, Chitra

  • Cost center report,Profit center report

    Dear Experts,
                         Pls tell me what are the reports availble in  ecc6 for cost center & profit center. Pls give T.Code for report.
    In general for controlling reports are standard or we have to customise the report.
    Thanks in advance
    regards
    avudaiappan

    Dear Avudaiappan,
    Cost Center:
    KSB9      -           Planning Report: Cost Centers
    PC00_MNA_CC_MAN   -   Cost Center Report - Manager
    OKB6                 Generate Cost Center Acctg. Reports
    OKR6                 Change Report List for Cost Centers
    PC00_MNA_CC_ADM      Cost Center Report - Administrator
    Profit Center:
    S_ALR_87009734       Profit Center Report: 2 Versions
    S_ALR_87010786       Profit Center Report            
    S_ALR_87011787       Profit Center Report            
    S_ALR_87013957       Profit Center Report: 2 Versions
    Regards,
    Naveen.

  • Profit center report -report painter

    Guys,
    Could anyone please tell me if we can use cost centers with GL a/cs in report painter. I created a report painter report for profit centers using library 0FL-which uses table FAGLFLEXT.Actually I am trying to get data for P&L report by periods and profit centers, Should I also use cost centers with GL a/cs.?I have GL accounts that is coming up moe than once in the report i.;e: cost of sales a/c, and issue is i cannot use this a/c more than once in the report cuz it duplicates the balance.I don't know how to use those a/cs .Any idea?
    Thanks
    Shaun

    Hi
    Please check you may have repeatedly used sets (of GL) used in any of the Variable
    VVR

  • Profit Center Report issue

    Dear Experts,
    We have activated NEW GL Functionality and Classical PCA is switched off (i.e. no dummy pc is created)
    and client's Profit Center report requirement is as following.
    Under Profit Center,client wants to view the costs -Cost elements wise (BOTH THE REVENUE & COSTS) and Cost Center wise.
    We have searched all the standard reports,but there is no such report to meet the client's requirement.
    So we have decided to go with the development.Can any body share the table name ,by which we can develop a report to meet the client requirement.
    Note that Table :COEP is tried ,but cost center field is not available in this table .
    Regards
    Su

    Hi
    You should use the library 0FS or 0FL to write your own report as per the format required. Standard Reports will not have the layout required. The link below will guide you on the steps to write a report in Report Painter. You need to down load the PPT
    http://www.erpdb.info/report-painter-step-by-step-guide/
    Regards
    Sanil Bhandari

  • Profit Center Report - GLPCA

    Dear Experts,
    I want to include Production and Sales Quantities in Profit Center Report but i am not able to do so because this data is placed in Table : GLPCA and i am only able to use Table : GLPCT in Report Painter.
    Please guide me how to solve my problem using Report Painter Report?
    Regards,
    Zain Bashir

    Dear Mani,
    Thanks for your reply.
    I also need to incorporate various fields along with quantities on Profit Center Report therefore i needed any solution which could help me get both type of quantities on Report Painter Tool.
    Regards,
    Zain Bashir

  • Re: Profit Center Reporting

    Hi Friends,
    Iam new to ABAP/4 programming. I need to define reports in Profit center by using other Application components like SD,MM,Plant etc.
    1. Can i create the report using Report Painter or WR?
    2.Can u tell me the list of libraries used in profit center accounting
    3.If i use ABAP then, please tell me logical database "SAP defined" for profit center accounting.
    Please help me out it's urgent.
    Thanks in advance.
    Regards,
    Ram.

    Hi
    Yes, You can design a report with Report Painter/writer or from the Tables using CEPC,GLPPC and GLTPC
    see the notes on Report painter/writer and do accordingly
    Report Writer functions can be accessed from within the Report Painter.
    The difference lies in the GUI of the report painter.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Refer the following links :
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
    http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    You can use the LDB 'GLG' for this PCC reports
    Regards
    Anji

  • Navigation - profit center report

    Hi,
    How do i insert the the Navigation button in the report painter.
    I.e,
    Wanted the profit center group to be displayed in the left hand side of the report so that each profit center balance can be seen. This function is available in standard report. how do i plug it in report painter.
    Pls it very urgent.
    Thanks,
    Sujai C
    Message was edited by:
            sujai  chandran

    Sai,
    I had assigned point to you 1st. later other person was more informative and i had a problem in assigning the point to that perosn. so i re assigned the point to you and assigned points to other perosn also.
    Any way i pointed out to say, what was the reason to re assign the points to you.
    If your answer was more informative then the other perosn, i would surely assigned more point to you.
    Thanks,
    Sujai C

  • Error in Profit center reports

    Hello
    when I am executing the profit center reports i.e. 2KEE and KE5Z using following selection parameters  we are getting the differ results for the different reports
    so which one of the said reports are correct and why the system is showing different results is the any OSS note need to apply of so please let me know which note and how it should be applied
    Here are the selection parameters
    Record type     0, 2
    Version          0
    Controlling area     1000
    Company code     ABC
    Posting period     __ to 1
    Fiscal year     2008
    Profit centre     100dummy
    Waiting for your positive reply
    Regards
    RS

    Hi,
    The purpose of both the reports are different. 2KEE is the summary of the profit center record which means the summary of all the line items for a particular profit center under a particular account number. This report is using the table GLPCT-EC-PCA Totals table wheres KE5Z is a purely a line item reporting using the table GLPCA-EC-PCA Actual line items.
    All the data reflected in Profit Center Accounting is stored in the totals record table GLPCT. This table contains data which is summarized according to certain characteristics and forms the basis for all reports defined with the Report Writer or the Report Painter (regardless of whether or not you choose to store line items).
    You can also know more on 2KEE report at this link under Information System --> Displaying total records.
    [http://help.sap.com/saphelp_46c/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm]
    Good Luck!!! Please award points if this was useful to you.
    Thanks and Regards,
    Bhuvaneswari.S

  • NEW GL profit center report in Controlling area currency

    Hi all,
    Could anybody suggest me,
    how do we have the New GL profit center  report in controlling area currency.
    or else if any possibility for report painter report please suggest.
    Thanks
    kishore

    Hi Kishore
    New GL PCA values are stored in FAGLFLEX* tables.
    These are FI tabls and they store values in 1st 2nd and 3rd currency of FI. If your control area current is same as anyof these, you can access report in that currency
    Else, you can do the conversion inside your report using a static exchange rate
    Br. Ajay M

  • GR55 - profit center report

    Hi Report Painter Guru,
    I want to have a GR55 profit center report to be the below format
                        Profit center1           Profit center 2.................Overall
    revenue      xxxxx                          xxxxx                                   xxxxx
    cost              xxxxx                          xxxxx                                   xxxxx
    margine      xxxxx                          xxxxx                                   xxxxx
    is it possible? can advice the steps or important tips
    Thanks,
    Kick

    Hi,
    Create form with required columns and rows.
    You can select profit center 1 in first column and profit center 2 in second column and total in 3 rd column.
    Select key fields like revenue  and cost in first and second rows.Use formula row1-row2 for margin in third row.
    Complete general selection settings and assign form to report.
    Regards,
    Kishore

  • KE5Z Vs 2KEE - Profit center Reports

    hi,
    Could anyone explain me the difference between these two reports Profit center reports KE5Z and 2KEE.
    KE5Z is line item report and 2KEE is Totals report.
    I would like to know the diffrence especially with refernce to a report painter report.
    I have created a report painter report based on GLPCT table, which is a totals table.
    So when i match my report painter report and 2KEE - it tallies.
    But my report painter report does not match with report KE5Z (of course it does not match even when i make additions and subtractions of all the line items appeared in KE5Z).
    Could any one tell me why this happens.
    Thanks,
    DSK

    Hi
    KE5Z will draw data from GLPCA which is the line items table. Please check the parameters for both the reports as ideally it should match.
    Check the profit centre , the period and any selections if any.
    Thanks

  • How do we add more fields to the existing profit center reports

    Hello everybody,
    I need help in profit center reporting. The issue is my client is able to draw profit center reports, however they want to extend this i.e, they wish to get the reports of profitability for each product line, Debtors, Creditors, other current assets, other current liabilities, stock for each profit center. Do I follow, segment reporting as given in help.sap.com (defining report painter etc), or is there any other way to go about. And the fact is that I've not worked on report painter, in a way I can say that i've not worked much in controlling. 
    THIS IS VERY URGENT. INSIGHTS INTO THIS WOULD BE HIGHLY APPRECITED.
    Regards,
    Soujanya

    Hi Nelson,
    If you are only adding a single row or column; or need to add one in the middle of your sheet dont forget you can get to the insert menu by clicking on the side/top bars. A second tap on the right arrow gets you here:
    Insert will add your row (or column)
    Hi SG,
    This corner handle may be a difference between iPad and iPhone/iPod I don't see it on my iPod.
    Q

  • The structure of the profit center report in new GL

    Hello,
    I must finish a query for the customer this week. This query must base on a sap standard report for the new GL.
    Because our ECC 6.0 system hasn't the Enhancement Package 3 (contains the necessary new features) yet, so I can't see this standard report which should be displayed under the path:
    SAP Menu --> Accounting --> Financial Accounting --> General Ledger --> Information System --> General Ledger Reports (New) --> Profit Center Reports --> S_E38_98000088 - Profit Center Group: Plan/Actual/Variance
    Can somebody tell me the structure of this report, if you can see this report in your system?
    - Which key figure has been used in the report?
    - What are in the rows and columns?
    - Which characteristics are available to navigation?
    - Which variables and General data selections are there?
    Hope somebody can help me. Thanks a lot!
    Best regards,
    Yuanyuan

    Hi,
    Then my suggesion is you copy the form & report structure  of most suitable report (which you have downloaded through FGIQ) .Modify the form according to your reporting requirement. Create new report by coping standard report & assign this newly created form to this report.This will serve your purpose.
    Please do not make any changes to standard report.Copy it & then do the changes.
    Transaction code for the same is FGI0 or  FGI1 or FGI2 or 3 or 4 or 5 or FGI6.
    Second suggestion is in SPRO in GL information system (infact in each information system ) you will find drilldown report node in that import report transaction e.g. FSIQ .Import all reports you might get your required report.
    Regards,
    Abhijit

Maybe you are looking for

  • Table containing cost center and PO data

    hello, i need a table where the cost center(KOSTL) is defined as a primary key. the table should also contain PO numbers.

  • Cisco Quality Manager 8.5 "Domain could not be validated" error

    Hi Has anyone encountered this error when they attempt to add domain to Quality Manager? I need to understand how I can fix this problem? Marsha

  • 10.4.11 = 10.5.6 migration: preserving samba domain

    Hi, I'm trying to follow OSX server migration path from tiger to leopard as described in document "Upgrading and Migrating v10.5 2nd ed" and to preserve as much data as possible in OpenDirectory and Windows services (samba). OpenDirectory migration l

  • SPA devices - factory reset/upgrade firmware via HTTP?

    I've a number of clients using SPA502G's, SPA504G's, and some of the older/Linksys SPA-922 devices with a hosted PBX. Getting these devices to resync via http is really handy, e.g. http://192.168.1.12/admin/resync?http://prov.domainname.com/something

  • Lenovo XP Mode versus Windows XP Mode?

    I'm in the process of setting up a new W520 that was ordered with the "Windows XP Mode" option. The relevant menu folder has entries for both a "Lenovo XP Mode" and the expected "Windows XP Mode." What's the difference, if any? I hesitate to do the o